If hci_add_adv_monitor is a pending command(e.g. forward to
msft_add_monitor_pattern), it is possible that
mgmt_add_adv_patterns_monitor_complete gets called before
cmd->user_data gets set, which will cause a crash when we
try to get the moniter handle through cmd->user_data in
mgmt_add_adv_patterns_monitor_complete.

This moves the cmd->user_data assignment earlier than
hci_add_adv_monitor.

RIP: 0010:mgmt_add_adv_patterns_monitor_complete+0x82/0x187 [bluetooth]
Code: 1e bf 03 00 00 00 be 52 00 00 00 4c 89 ea e8 9e
e4 02 00 49 89 c6 48 85 c0 0f 84 06 01 00 00 48 89 5d b8 4c 89 fb 4d 8b
7e 30 <41> 0f b7 47 18 66 89 45 c0 45 84 e4 75 5a 4d 8b 56 28 48 8d 4d
c8
RSP: 0018:ffffae81807dbcb8 EFLAGS: 00010286
RAX: ffff91c4bdf723c0 RBX: 0000000000000000 RCX: ffff91c4e5da5b80
RDX: ffff91c405680000 RSI: 0000000000000052 RDI: ffff91c49d654c00
RBP: ffffae81807dbd00 R08: ffff91c49fb157e0 R09: ffff91c49fb157e0
R10: 000000000002a4f0 R11: ffffffffc0819cfd R12: 0000000000000000
R13: ffff91c405680000 R14: ffff91c4bdf723c0 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffff91c4ea300000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000018 CR3: 0000000133612002 CR4:
00000000003606e0
Call Trace:
 ? msft_le_monitor_advertisement_cb+0x111/0x141
[bluetooth]
 hci_event_packet+0x425e/0x631c [bluetooth]
 ? printk+0x59/0x73
 ? __switch_to_asm+0x41/0x70
 ?
msft_le_set_advertisement_filter_enable_cb+0xa6/0xa6 [bluetooth]
 ? bt_dbg+0xb4/0xbb [bluetooth]
 ? __switch_to_asm+0x41/0x70
 hci_rx_work+0x101/0x319 [bluetooth]
 process_one_work+0x257/0x506
 worker_thread+0x10d/0x284
 kthread+0x14c/0x154
 ? process_one_work+0x506/0x506
 ? kthread_blkcg+0x2c/0x2c
 ret_from_fork+0x1f/0x40
Reviewed-by: NMiao-chen Chou <mcchou@chromium.org>
Reviewed-by: NManish Mandlik <mmandlik@chromium.org>
Reviewed-by: NArchie Pusaka <apusaka@chromium.org>
Signed-off-by: NHoward Chung <howardchung@google.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

In btusb_mtk_wmt_recv if skb_clone fails, the alocated skb should be
released.

Omit the labels “err_out” and “err_free_skb” in this function
implementation so that the desired exception handling code
would be directly specified in the affected if branches.

Fixes: a1c49c43 ("btusb: Add protocol support for MediaTek MT7668U USB devices")
Signed-off-by: NJupeng Zhong <zhongjupeng@yulong.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

kernel panic trace looks like:

 #5 [ffffb9e08698fc80] do_page_fault at ffffffffb666e0d7
 #6 [ffffb9e08698fcb0] page_fault at ffffffffb70010fe
    [exception RIP: amp_read_loc_assoc_final_data+63]
    RIP: ffffffffc06ab54f  RSP: ffffb9e08698fd68  RFLAGS: 00010246
    RAX: 0000000000000000  RBX: ffff8c8845a5a000  RCX: 0000000000000004
    RDX: 0000000000000000  RSI: ffff8c8b9153d000  RDI: ffff8c8845a5a000
    RBP: ffffb9e08698fe40   R8: 00000000000330e0   R9: ffffffffc0675c94
    R10: ffffb9e08698fe58  R11: 0000000000000001  R12: ffff8c8b9cbf6200
    R13: 0000000000000000  R14: 0000000000000000  R15: ffff8c8b2026da0b
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 #7 [ffffb9e08698fda8] hci_event_packet at ffffffffc0676904 [bluetooth]
 #8 [ffffb9e08698fe50] hci_rx_work at ffffffffc06629ac [bluetooth]
 #9 [ffffb9e08698fe98] process_one_work at ffffffffb66f95e7

hcon->amp_mgr seems NULL triggered kernel panic in following line inside
function amp_read_loc_assoc_final_data

        set_bit(READ_LOC_AMP_ASSOC_FINAL, &mgr->state);

Fixed by checking NULL for mgr.
Signed-off-by: NGopal Tiwari <gtiwari@redhat.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

There is mt7921 firmware download mechanism

1. Read Chip id from MT7921.

2. Download firmware by endpoint 0, it's the same mechanism with
mt7663/mt7668.
   (it's medaitek specific header format for downloading firmware.)

3. Enabling Bluetooth function.

The information in /sys/kernel/debug/usb/devices about the MT7921U
Bluetooth device is listed as the below.

  T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 40 Spd=480  MxCh= 0
  D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
  P:  Vendor=0e8d ProdID=7961 Rev= 1.00
  S:  Manufacturer=MediaTek Inc.
  S:  Product=Wireless_Device
  S:  SerialNumber=000000000
  C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
  A:  FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
  I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
  E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=125us
  E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
  E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
  I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
  E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
  E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
  I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
  E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
  E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
  I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
  E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
  E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
  I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
  E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
  E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
  I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
  E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
  E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
  I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
  E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
  E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
  I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
  E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
  E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
  I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
  E:  Ad=8a(I) Atr=03(Int.) MxPS=  64 Ivl=125us
  E:  Ad=0a(O) Atr=03(Int.) MxPS=  64 Ivl=125us
  I:  If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
  E:  Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
  E:  Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us
Signed-off-by: NMark Chen <Mark-YW.Chen@mediatek.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Fine-tune read register for mt7663/mt7921.
For mediatek chip spcific wmt protocol, we add more delay to send EP0
In-Token.
Signed-off-by: NMark Chen <Mark-YW.Chen@mediatek.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

QCA_IBS_DISABLED flag will be set after memorydump started from
controller.Currently qca_suspend() is waiting for SSR to complete
based on flag QCA_IBS_DISABLED.Added to check for QCA_SSR_TRIGGERED
flag too.

Fixes: 2be43aba ("Bluetooth: hci_qca: Wait for timeout during suspend")
Signed-off-by: NVenkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

If a peer device doesn't support eSCO 2M we should skip the params that
use it when setting up sync connection since they will always fail.
Signed-off-by: NYu Liu <yudiliu@google.com>
Reviewed-by: NAbhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Signed-off-by: NTomoyuki Matsushita <xorphitus@fastmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

By this change, it will enable WBS supported on the specific Realtek BT
devices, such as RTL8822C and RTL8852A.
In the future, it's able to maintain what the Realtek devices support WBS
here.
Tested-by: NHilda Wu <hildawu@realtek.com>
Reviewed-by: NAbhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: NMax Chou <max.chou@realtek.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Use DEFINE_DEBUGFS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTRIBUTE
for debugfs files.

Reported-by: Abaci Robot<abaci@linux.alibaba.com>
Signed-off-by: NJiapeng Zhong <abaci-bugfix@linux.alibaba.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Some devices, e.g. the RTL8723BS bluetooth part, some USB attached devices,
completely drop from the bus on a system-suspend. These devices will
have their driver unbound and rebound on resume (when the dropping of
the bus gets detected) and will show up as a new HCI after resume.

These devices do not benefit from the suspend / resume handling work done
by the hci_suspend_notifier. At best this unnecessarily adds some time to
the suspend/resume time. But this may also actually cause problems, if the
code doing the driver unbinding runs after the pm-notifier then the
hci_suspend_notifier code will try to talk to a device which is now in
an uninitialized state.

This commit adds a new HCI_QUIRK_NO_SUSPEND_NOTIFIER quirk which allows
drivers to opt-out of the hci_suspend_notifier when they know beforehand
that their device will be fully re-initialized / reprobed on resume.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Reviewed-by: NAbhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The current implementation of L2CAP options negotiation will continue
the negotiation when a device responds with L2CAP_CONF_UNACCEPT ("unaccepted
options"), but not when the device replies with L2CAP_CONF_UNKNOWN ("unknown
options").

Trying to continue the negotiation without ERTM support will allow
Bluetooth-capable XBox One controllers (notably models 1708 and 1797)
to connect.

btmon before patch:
> ACL Data RX: Handle 256 flags 0x02 dlen 16                            #64 [hci0] 59.182702
      L2CAP: Connection Response (0x03) ident 2 len 8
        Destination CID: 64
        Source CID: 64
        Result: Connection successful (0x0000)
        Status: No further information available (0x0000)
< ACL Data TX: Handle 256 flags 0x00 dlen 23                            #65 [hci0] 59.182744
      L2CAP: Configure Request (0x04) ident 3 len 15
        Destination CID: 64
        Flags: 0x0000
        Option: Retransmission and Flow Control (0x04) [mandatory]
          Mode: Basic (0x00)
          TX window size: 0
          Max transmit: 0
          Retransmission timeout: 0
          Monitor timeout: 0
          Maximum PDU size: 0
> ACL Data RX: Handle 256 flags 0x02 dlen 16                            #66 [hci0] 59.183948
      L2CAP: Configure Request (0x04) ident 1 len 8
        Destination CID: 64
        Flags: 0x0000
        Option: Maximum Transmission Unit (0x01) [mandatory]
          MTU: 1480
< ACL Data TX: Handle 256 flags 0x00 dlen 18                            #67 [hci0] 59.183994
      L2CAP: Configure Response (0x05) ident 1 len 10
        Source CID: 64
        Flags: 0x0000
        Result: Success (0x0000)
        Option: Maximum Transmission Unit (0x01) [mandatory]
          MTU: 1480
> ACL Data RX: Handle 256 flags 0x02 dlen 15                            #69 [hci0] 59.187676
      L2CAP: Configure Response (0x05) ident 3 len 7
        Source CID: 64
        Flags: 0x0000
        Result: Failure - unknown options (0x0003)
        04                                               .
< ACL Data TX: Handle 256 flags 0x00 dlen 12                            #70 [hci0] 59.187722
      L2CAP: Disconnection Request (0x06) ident 4 len 4
        Destination CID: 64
        Source CID: 64
> ACL Data RX: Handle 256 flags 0x02 dlen 12                            #73 [hci0] 59.192714
      L2CAP: Disconnection Response (0x07) ident 4 len 4
        Destination CID: 64
        Source CID: 64

btmon after patch:
> ACL Data RX: Handle 256 flags 0x02 dlen 16                          #248 [hci0] 103.502970
      L2CAP: Connection Response (0x03) ident 5 len 8
        Destination CID: 65
        Source CID: 65
        Result: Connection pending (0x0001)
        Status: No further information available (0x0000)
> ACL Data RX: Handle 256 flags 0x02 dlen 16                          #249 [hci0] 103.504184
      L2CAP: Connection Response (0x03) ident 5 len 8
        Destination CID: 65
        Source CID: 65
        Result: Connection successful (0x0000)
        Status: No further information available (0x0000)
< ACL Data TX: Handle 256 flags 0x00 dlen 23                          #250 [hci0] 103.504398
      L2CAP: Configure Request (0x04) ident 6 len 15
        Destination CID: 65
        Flags: 0x0000
        Option: Retransmission and Flow Control (0x04) [mandatory]
          Mode: Basic (0x00)
          TX window size: 0
          Max transmit: 0
          Retransmission timeout: 0
          Monitor timeout: 0
          Maximum PDU size: 0
> ACL Data RX: Handle 256 flags 0x02 dlen 16                          #251 [hci0] 103.505472
      L2CAP: Configure Request (0x04) ident 3 len 8
        Destination CID: 65
        Flags: 0x0000
        Option: Maximum Transmission Unit (0x01) [mandatory]
          MTU: 1480
< ACL Data TX: Handle 256 flags 0x00 dlen 18                          #252 [hci0] 103.505689
      L2CAP: Configure Response (0x05) ident 3 len 10
        Source CID: 65
        Flags: 0x0000
        Result: Success (0x0000)
        Option: Maximum Transmission Unit (0x01) [mandatory]
          MTU: 1480
> ACL Data RX: Handle 256 flags 0x02 dlen 15                          #254 [hci0] 103.509165
      L2CAP: Configure Response (0x05) ident 6 len 7
        Source CID: 65
        Flags: 0x0000
        Result: Failure - unknown options (0x0003)
        04                                               .
< ACL Data TX: Handle 256 flags 0x00 dlen 12                          #255 [hci0] 103.509426
      L2CAP: Configure Request (0x04) ident 7 len 4
        Destination CID: 65
        Flags: 0x0000
< ACL Data TX: Handle 256 flags 0x00 dlen 12                          #257 [hci0] 103.511870
      L2CAP: Connection Request (0x02) ident 8 len 4
        PSM: 1 (0x0001)
        Source CID: 66
> ACL Data RX: Handle 256 flags 0x02 dlen 14                          #259 [hci0] 103.514121
      L2CAP: Configure Response (0x05) ident 7 len 6
        Source CID: 65
        Flags: 0x0000
        Result: Success (0x0000)
Signed-off-by: NFlorian Dollinger <dollinger.florian@gmx.de>
Co-developed-by: NFlorian Dollinger <dollinger.florian@gmx.de>
Reviewed-by: NLuiz Augusto Von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Bluetooth Core Specification v5.2, Vol. 3, Part A, section 1.4, table
1.1:

 'Start Fragments always either begin with the first octet of the Basic
  L2CAP header of a PDU or they have a length of zero (see [Vol 2] Part
  B, Section 6.6.2).'

Apparently this was changed by the following errata:

https://www.bluetooth.org/tse/errata_view.cfm?errata_id=10216Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

kmemleak report:
unreferenced object 0xffff9b1127f00500 (size 208):
  comm "kworker/u17:2", pid 500, jiffies 4294937470 (age 580.136s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 60 ed 05 11 9b ff ff 00 00 00 00 00 00 00 00  .`..............
  backtrace:
    [<000000006ab3fd59>] kmem_cache_alloc_node+0x17a/0x480
    [<0000000051a5f6f9>] __alloc_skb+0x5b/0x1d0
    [<0000000037e2d252>] hci_prepare_cmd+0x32/0xc0 [bluetooth]
    [<0000000010b586d5>] hci_req_add_ev+0x84/0xe0 [bluetooth]
    [<00000000d2deb520>] hci_req_clear_event_filter+0x42/0x70 [bluetooth]
    [<00000000f864bd8c>] hci_req_prepare_suspend+0x84/0x470 [bluetooth]
    [<000000001deb2cc4>] hci_prepare_suspend+0x31/0x40 [bluetooth]
    [<000000002677dd79>] process_one_work+0x209/0x3b0
    [<00000000aaa62b07>] worker_thread+0x34/0x400
    [<00000000826d176c>] kthread+0x126/0x140
    [<000000002305e558>] ret_from_fork+0x22/0x30
unreferenced object 0xffff9b1125c6ee00 (size 512):
  comm "kworker/u17:2", pid 500, jiffies 4294937470 (age 580.136s)
  hex dump (first 32 bytes):
    04 00 00 00 0d 00 00 00 05 0c 01 00 11 9b ff ff  ................
    00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00  ................
  backtrace:
    [<000000009f07c0cc>] slab_post_alloc_hook+0x59/0x270
    [<0000000049431dc2>] __kmalloc_node_track_caller+0x15f/0x330
    [<00000000027a42f6>] __kmalloc_reserve.isra.70+0x31/0x90
    [<00000000e8e3e76a>] __alloc_skb+0x87/0x1d0
    [<0000000037e2d252>] hci_prepare_cmd+0x32/0xc0 [bluetooth]
    [<0000000010b586d5>] hci_req_add_ev+0x84/0xe0 [bluetooth]
    [<00000000d2deb520>] hci_req_clear_event_filter+0x42/0x70 [bluetooth]
    [<00000000f864bd8c>] hci_req_prepare_suspend+0x84/0x470 [bluetooth]
    [<000000001deb2cc4>] hci_prepare_suspend+0x31/0x40 [bluetooth]
    [<000000002677dd79>] process_one_work+0x209/0x3b0
    [<00000000aaa62b07>] worker_thread+0x34/0x400
    [<00000000826d176c>] kthread+0x126/0x140
    [<000000002305e558>] ret_from_fork+0x22/0x30
unreferenced object 0xffff9b112b395788 (size 8):
  comm "kworker/u17:2", pid 500, jiffies 4294937470 (age 580.136s)
  hex dump (first 8 bytes):
    20 00 00 00 00 00 04 00                           .......
  backtrace:
    [<0000000052dc28d2>] kmem_cache_alloc_trace+0x15e/0x460
    [<0000000046147591>] alloc_ctrl_urb+0x52/0xe0 [btusb]
    [<00000000a2ed3e9e>] btusb_send_frame+0x91/0x100 [btusb]
    [<000000001e66030e>] hci_send_frame+0x7e/0xf0 [bluetooth]
    [<00000000bf6b7269>] hci_cmd_work+0xc5/0x130 [bluetooth]
    [<000000002677dd79>] process_one_work+0x209/0x3b0
    [<00000000aaa62b07>] worker_thread+0x34/0x400
    [<00000000826d176c>] kthread+0x126/0x140
    [<000000002305e558>] ret_from_fork+0x22/0x30

In pm sleep-resume context, while the btusb device rebinds, it enters
hci_unregister_dev(), whilst there is a possibility of hdev receiving
PM_POST_SUSPEND suspend_notifier event, leading to generation of msg
frames. When hci_unregister_dev() completes, i.e. hdev context is
destroyed/freed, those intermittently sent msg frames cause memory
leak.

BUG details:
Below is stack trace of thread that enters hci_unregister_dev(), marks
the hdev flag HCI_UNREGISTER to 1, and then goes onto to wait on notifier
lock - refer unregister_pm_notifier().

  hci_unregister_dev+0xa5/0x320 [bluetoot]
  btusb_disconnect+0x68/0x150 [btusb]
  usb_unbind_interface+0x77/0x250
  ? kernfs_remove_by_name_ns+0x75/0xa0
  device_release_driver_internal+0xfe/0x1
  device_release_driver+0x12/0x20
  bus_remove_device+0xe1/0x150
  device_del+0x192/0x3e0
  ? usb_remove_ep_devs+0x1f/0x30
  usb_disable_device+0x92/0x1b0
  usb_disconnect+0xc2/0x270
  hub_event+0x9f6/0x15d0
  ? rpm_idle+0x23/0x360
  ? rpm_idle+0x26b/0x360
  process_one_work+0x209/0x3b0
  worker_thread+0x34/0x400
  ? process_one_work+0x3b0/0x3b0
  kthread+0x126/0x140
  ? kthread_park+0x90/0x90
  ret_from_fork+0x22/0x30

Below is stack trace of thread executing hci_suspend_notifier() which
processes the PM_POST_SUSPEND event, while the unbinding thread is
waiting on lock.

  hci_suspend_notifier.cold.39+0x5/0x2b [bluetooth]
  blocking_notifier_call_chain+0x69/0x90
  pm_notifier_call_chain+0x1a/0x20
  pm_suspend.cold.9+0x334/0x352
  state_store+0x84/0xf0
  kobj_attr_store+0x12/0x20
  sysfs_kf_write+0x3b/0x40
  kernfs_fop_write+0xda/0x1c0
  vfs_write+0xbb/0x250
  ksys_write+0x61/0xe0
  __x64_sys_write+0x1a/0x20
  do_syscall_64+0x37/0x80
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fix hci_suspend_notifer(), not to act on events when flag HCI_UNREGISTER
is set.
Signed-off-by: NVamshi K Sthambamkadi <vamshi.k.sthambamkadi@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The standard DT property name is "interrupt-names".

Fixes: fd913ef7 ("Bluetooth: btusb: Add out-of-band wakeup support")
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: NRob Herring <robh@kernel.org>
Reviewed-by: NBrian Norris <briannorris@chromium.org>
Acked-by: NRajat Jain <rajatja@google.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Jump to the label done to decrement the reference count of HCI device
hdev on path that the Inquiry procedure is interrupted.

Fixes: 3e13fa1e ("Bluetooth: Fix hci_inquiry ioctl usage")
Signed-off-by: NPan Bian <bianpan2016@163.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Call hci_dev_put() to decrement reference count of HCI device hdev if
fails to duplicate memory.

Fixes: 0b26ab9d ("Bluetooth: AMP: Handle Accept phylink command status evt")
Signed-off-by: NPan Bian <bianpan2016@163.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This adds logic to disable and reenable advertisement filters during
suspend and resume. After this patch, we would only receive packets from
devices in allow list during suspend.
Signed-off-by: NHoward Chung <howardchung@google.com>
Reviewed-by: NAbhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

When MSFT extension is supported, we don't have to interleave the scan
as we could just do allowlist scan.
Signed-off-by: NArchie Pusaka <apusaka@chromium.org>
Reviewed-by: NMiao-chen Chou <mcchou@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Implements the feature to disable/enable the filter used for
advertising monitor on MSFT controller, effectively have the same
effect as "remove all monitors" and "add all previously removed
monitors".

This feature would be needed when suspending, where we would not want
to get packets from anything outside the allowlist. Note that the
integration with the suspending part is not included in this patch.
Signed-off-by: NArchie Pusaka <apusaka@chromium.org>
Reviewed-by: NMiao-chen Chou <mcchou@chromium.org>
Reviewed-by: NYun-Hao Chung <howardchung@google.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

When the controller is powered off, the registered advertising monitor
is removed from the controller. This patch handles the re-registration
of those monitors when the power is on.
Signed-off-by: NArchie Pusaka <apusaka@chromium.org>
Reviewed-by: NMiao-chen Chou <mcchou@chromium.org>
Reviewed-by: NYun-Hao Chung <howardchung@google.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Implements the monitor removal functionality for advertising monitor
offloading to MSFT controllers. Supply handle = 0 to remove all
monitors.
Signed-off-by: NArchie Pusaka <apusaka@chromium.org>
Reviewed-by: NMiao-chen Chou <mcchou@chromium.org>
Reviewed-by: NYun-Hao Chung <howardchung@google.com>
Reported-by: Nkernel test robot <lkp@intel.com>
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Enables advertising monitor offloading to the controller, if MSFT
extension is supported. The kernel won't adjust the monitor parameters
to match what the controller supports - that is the user space's
responsibility.

This patch only manages the addition of monitors. Monitor removal is
going to be handled by another patch.
Signed-off-by: NArchie Pusaka <apusaka@chromium.org>
Reviewed-by: NManish Mandlik <mmandlik@chromium.org>
Reviewed-by: NMiao-chen Chou <mcchou@chromium.org>
Reviewed-by: NYun-Hao Chung <howardchung@google.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

MSFT needs rssi parameter for monitoring advertisement packet,
therefore we should supply them from mgmt. This adds a new opcode
to add advertisement monitor with rssi parameters.
Signed-off-by: NArchie Pusaka <apusaka@chromium.org>
Reviewed-by: NManish Mandlik <mmandlik@chromium.org>
Reviewed-by: NMiao-chen Chou <mcchou@chromium.org>
Reviewed-by: NYun-Hao Chung <howardchung@google.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Realtek Bluetooth controllers can do both LE scan and BR/EDR inquiry
at once, need to set HCI_QUIRK_SIMULTANEOUS_DISCOVERY quirk.
Signed-off-by: NClaire Chang <tientzu@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

During SSR after memory dump collection,BT controller will be powered off,
powered on and then FW will be downloaded.During suspend if BT controller
is powered off due to SSR then we should wait until SSR is completed and
then suspend.

Fixes: 2be43aba ("Bluetooth: hci_qca: Wait for timeout during suspend")
Signed-off-by: NVenkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

When __le32_to_cpu() fails, qca_memdump should be freed
just like when vmalloc() fails.

Fixes: d841502c ("Bluetooth: hci_qca: Collect controller memory dump during SSR")
Signed-off-by: NDinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

RTL8723DS could be handled by btrtl-driver, so add ability to bind it
using device tree.
Signed-off-by: NJohn-Eric Kamps <johnny86@gmx.de>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

VID:PID -> 8087:0033

cat /sys/kernel/debug/usb/devices:

T:  Bus=03 Lev=01 Prnt=01 Port=09 Cnt=03 Dev#=  3 Spd=12   MxCh= 0
D:  Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=8087 ProdID=0033 Rev= 0.00
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
Signed-off-by: NKiran K <kiran.k@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

u128_xor() takes pointers to quantities that are assumed to be at least
64-bit aligned, which is not guaranteed to be the case in the smp_c1()
routine. So switch to crypto_xor() instead.
Signed-off-by: NArd Biesheuvel <ardb@kernel.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

btrtl_dev->ic_info is only available from the controller on cold boot
(the lmp subversion matches the device model and this is used to look up
the ic_info). On warm boots (firmware already loaded),
btrtl_dev->ic_info is null.

Fixes: 05672a2c (Bluetooth: btrtl: Enable central-peripheral role)
Signed-off-by: NAbhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Looks like this was missed when patching the source to clear the structures
throughout, causing this one instance to clear the struct after the response
id is assigned.

Fixes: eddb7732 ("Bluetooth: A2MP: Fix not initializing all members")
Signed-off-by: NChristopher William Snowhill <chris@kode54.net>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Enable the central-peripheral role on RTL8822CE. This enables creating
connections while there is an existing connection in the slave role.

This change can be confirmed in userspace via `bluetoothctl show` which
will now show "Roles: central-peripheral".
Reviewed-by: NDaniel Winkler <danielwinkler@google.com>
Signed-off-by: NAbhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The bt_dev_<level> macros already append a newline.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Many controllers do not allow HCI Create Connection while it is doing
Inquiry. This patch adds Inquiry Cancel before Create Connection in this
case to allow the controller to do Create Connection. User space will be
aware of this Inquiry cancellation and they may issue another discovery
request afterwards.

Sample Command Disallowed response of HCI Create Connection:
< HCI Command: Inquiry (0x01|0x0001) plen 5
        Access code: 0x9e8b33 (General Inquiry)
        Length: 10.24s (0x08)
        Num responses: 0
> HCI Event: Command Status (0x0f) plen 4
      Inquiry (0x01|0x0001) ncmd 2
        Status: Success (0x00)
< HCI Command: Create Connection (0x01|0x0005) plen 13
        Address: XX:XX:XX:XX:XX:XX
        Packet type: 0xcc18
        Page scan repetition mode: R2 (0x02)
        Page scan mode: Mandatory (0x00)
        Clock offset: 0x0000
        Role switch: Allow slave (0x01)
> HCI Event: Command Status (0x0f) plen 4
      Create Connection (0x01|0x0005) ncmd 1
        Status: Success (0x00)
> HCI Event: Connect Complete (0x03) plen 11
        Status: Command Disallowed (0x0c)
        Handle: 65535
        Address: XX:XX:XX:XX:XX:XX
        Link type: ACL (0x01)
        Encryption: Disabled (0x00)
Reviewed-by: NAbhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: NAlain Michaud <alainm@chromium.org>
Signed-off-by: NSonny Sasaka <sonnysasaka@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Switch and case where not properly aligned
Signed-off-by: NJagdish Tirumala <t.jag587@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This reverts commit a63f23c9d139377833a139b179793fea79ee198f.

get_unaligned_{le16|le32|le64}(p) is meant to replace code of the form
le16_to_cpu(get_unaligned((__le16 *)p)). There is no need to explicitly
do leXX_to_cpu() if get_unaligned_leXX() is used.

https://lwn.net/Articles/277779/Reported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: NKiran K <kiran.k@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This enables bcm driver to properly handle ISO packets.
Signed-off-by: NJakub Pawlowski <jpawlowski@google.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The Realtek RTL8822CE Bluetooth controller support Microsoft vendor
extension and it uses 0xFCF0 for VsMsftOpCode.

The following test step was performed.
- Boot the test device with RTL8822CE and verify the INFO print in
dmesg.
Signed-off-by: NMiao-chen Chou <mcchou@chromium.org>
Reviewed-by: NAbhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: NArchie Pusaka <apusaka@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The Intel JeffersonPeak, HarrisonPeak and CyclonePeak Bluetooth
controllers support the Microsoft vendor extension and they are using
0xFC1E for VsMsftOpCode.

< HCI Command: Vendor (0x3f|0x001e) plen 1
        00
> HCI Event: Command Complete (0x0e) plen 15
      Vendor (0x3f|0x001e) ncmd 1
        Status: Success (0x00)
        00 3f 00 00 00 00 00 00 00 01 50

The following test step was performed.
- Boot the test devices with HarrisonPeak and verify INFO print in
dmesg.
Signed-off-by: NMiao-chen Chou <mcchou@chromium.org>
Reviewed-by: NAbhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: NArchie Pusaka <apusaka@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>