- 23 2月, 2018 1 次提交
-
-
git://git.pengutronix.de/git/pza/linux由 Dave Airlie 提交于
drm/imx: ipu-v3 fixups and grayscale support - Make const interrupt register arrays static, reduces object size. - Fix device_node leaks in PRE/PRG phandle lookup functions. - Add 8-bit and 16-bit grayscale buffer support to ipu_cpmem_set_image, - add 10-bit and 12-bit grayscale media bus support to ipu-csi, to be used by the imx-media driver. * tag 'imx-drm-next-2018-02-22' of git://git.pengutronix.de/git/pza/linux: gpu: ipu-csi: add 10/12-bit grayscale support to mbus_code_to_bus_cfg gpu: ipu-cpmem: add 16-bit grayscale support to ipu_cpmem_set_image gpu: ipu-v3: prg: fix device node leak in ipu_prg_lookup_by_phandle gpu: ipu-v3: pre: fix device node leak in ipu_pre_lookup_by_phandle gpu: ipu-cpmem: add 8-bit grayscale support to ipu_cpmem_set_image gpu: ipu-v3: make const arrays int_reg static, shrinks object size
-
- 22 2月, 2018 1 次提交
-
-
git://anongit.freedesktop.org/drm/drm-misc由 Dave Airlie 提交于
Fixes for 4.16. I contains fixes for deadlock on runtime suspend on few drivers, a memory leak on non-blocking commits, a crash on color-eviction. The is also meson and edid fixes, plus a fix for a doc warning. * tag 'drm-misc-fixes-2018-02-21' of git://anongit.freedesktop.org/drm/drm-misc: drm/tve200: fix kernel-doc documentation comment include drm/meson: fix vsync buffer update drm: Handle unexpected holes in color-eviction drm/edid: Add 6 bpc quirk for CPT panel in Asus UX303LA drm/amdgpu: Fix deadlock on runtime suspend drm/radeon: Fix deadlock on runtime suspend drm/nouveau: Fix deadlock on runtime suspend drm: Allow determining if current task is output poll worker workqueue: Allow retrieval of current task's work struct drm/atomic: Fix memleak on ERESTARTSYS during non-blocking commits
-
- 21 2月, 2018 6 次提交
-
-
由 Jani Nikula 提交于
The DOC: line acts as an identifier for the :doc: include. Fixes: ./drivers/gpu/drm/tve200/tve200_drv.c:1: warning: no structured comments found Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180220142008.9330-1-jani.nikula@intel.com
-
由 Philipp Zabel 提交于
This uses the EDID info from the Sony PlayStation VR headset, when connected directly, to mark it as non-desktop. Since the connection box (product id b403) defaults to HDMI pass-through to the TV, it is not marked as non-desktop. Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Philipp Zabel 提交于
This uses the EDID info from Lenovo Explorer (LEN-b800), Acer AH100 (ACR-7fce), and Samsung Odyssey (SEC-144a) to mark them as non-desktop. The other entries are for the HP Windows Mixed Reality Headset (HPN-3515), the Fujitsu Windows Mixed Reality headset (FUJ-1970), the Dell Visor (DEL-7fce), and the ASUS HC102 (AUS-c102). They are not tested with real hardware, but listed as HMD monitors alongside the tested headsets in the Microsoft HololensSensors driver package. Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Philipp Zabel 提交于
This uses the EDID info from Oculus Rift DK1 (OVR-0001), DK2 (OVR-0003), and CV1 (OVR-0004) to mark them as non-desktop. Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
git://anongit.freedesktop.org/drm/drm-misc由 Dave Airlie 提交于
- fix lut loading for cirrus * tag 'drm-misc-fixes-2018-01-31' of git://anongit.freedesktop.org/drm/drm-misc: drm/cirrus: Load lut in crtc_commit
-
由 Dave Airlie 提交于
Merge tag 'exynos-drm-fixes-for-v4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes - three fixeups . it fixes potential issues[1] by using monotonic timestamp instead of 'struct timeval' . correct HDMI_I2S_PIN_SEL_1 definition and setting value. . fix bit shift typo of FIMC register definition - two cleanups . remove unnecessary error messages . remove exynos_drm_rotator.h file [1] https://patchwork.kernel.org/patch/10170205/ * tag 'exynos-drm-fixes-for-v4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm: exynos: Use proper macro definition for HDMI_I2S_PIN_SEL_1 drm/exynos: remove exynos_drm_rotator.h drm/exynos: g2d: Delete an error message for a failed memory allocation in two functions drm/exynos: fix comparison to bitshift when dealing with a mask drm/exynos: g2d: use monotonic timestamps
-
- 20 2月, 2018 7 次提交
-
-
由 Neil Armstrong 提交于
The plane buffer address/stride/height was incorrectly updated in the plane_atomic_update operation instead of the vsync irq. This patch delays this operation in the vsync irq along with the other plane delayed setup. This issue was masked using legacy framebuffer and X11 modesetting, but is clearly visible using gbm rendering when buffer is submitted late after vblank, like using software decoding and OpenGL rendering in Kodi. With this patch, tearing and other artifacts disappears completely. Cc: Michal Lazo <michal.lazo@gmail.com> Fixes: bbbe775e ("drm: Add support for Amlogic Meson Graphic Controller") Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com> Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1518689976-23292-1-git-send-email-narmstrong@baylibre.com
-
由 Chris Wilson 提交于
During eviction, the driver may free more than one hole in the drm_mm due to the side-effects in evicting the scanned nodes. However, drm_mm_scan_color_evict() expects that the scan result is the first available hole (in the mru freed hole_stack list): kernel BUG at drivers/gpu/drm/drm_mm.c:844! invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: i915 snd_hda_codec_analog snd_hda_codec_generic coretemp snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core lpc_ich snd_pcm e1000e mei_me prime_numbers mei CPU: 1 PID: 1490 Comm: gem_userptr_bli Tainted: G U 4.16.0-rc1-g740f57c54ecf-kasan_6+ #1 Hardware name: Dell Inc. OptiPlex 755 /0PU052, BIOS A08 02/19/2008 RIP: 0010:drm_mm_scan_color_evict+0x2b8/0x3d0 RSP: 0018:ffff880057a573f8 EFLAGS: 00010287 RAX: ffff8800611f5980 RBX: ffff880057a575d0 RCX: dffffc0000000000 RDX: 00000000029d5000 RSI: 1ffff1000af4aec1 RDI: ffff8800611f5a10 RBP: ffff88005ab884d0 R08: ffff880057a57600 R09: 000000000afff000 R10: 1ffff1000b5710b5 R11: 0000000000001000 R12: 1ffff1000af4ae82 R13: ffff8800611f59b0 R14: ffff8800611f5980 R15: ffff880057a57608 FS: 00007f2de0c2e8c0(0000) GS:ffff88006ac40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f2ddde1e000 CR3: 00000000609b2000 CR4: 00000000000006e0 Call Trace: ? drm_mm_scan_remove_block+0x330/0x330 ? drm_mm_scan_remove_block+0x151/0x330 i915_gem_evict_something+0x711/0xbd0 [i915] ? igt_evict_contexts+0x50/0x50 [i915] ? nop_clear_range+0x10/0x10 [i915] ? igt_evict_something+0x90/0x90 [i915] ? i915_gem_gtt_reserve+0x1a1/0x320 [i915] i915_gem_gtt_insert+0x237/0x400 [i915] __i915_vma_do_pin+0xc25/0x1a20 [i915] eb_lookup_vmas+0x1c63/0x3790 [i915] ? i915_gem_check_execbuffer+0x250/0x250 [i915] ? trace_hardirqs_on_caller+0x33f/0x590 ? _raw_spin_unlock_irqrestore+0x39/0x60 ? __pm_runtime_resume+0x7d/0xf0 i915_gem_do_execbuffer+0x86a/0x2ff0 [i915] ? __kmalloc+0x132/0x340 ? i915_gem_execbuffer2_ioctl+0x10f/0x760 [i915] ? drm_ioctl_kernel+0x12e/0x1c0 ? drm_ioctl+0x662/0x980 ? eb_relocate_slow+0xa90/0xa90 [i915] ? i915_gem_execbuffer2_ioctl+0x10f/0x760 [i915] ? __might_fault+0xea/0x1a0 i915_gem_execbuffer2_ioctl+0x3cc/0x760 [i915] ? i915_gem_execbuffer_ioctl+0xba0/0xba0 [i915] ? lock_acquire+0x3c0/0x3c0 ? i915_gem_execbuffer_ioctl+0xba0/0xba0 [i915] drm_ioctl_kernel+0x12e/0x1c0 drm_ioctl+0x662/0x980 ? i915_gem_execbuffer_ioctl+0xba0/0xba0 [i915] ? drm_getstats+0x20/0x20 ? debug_check_no_obj_freed+0x2a6/0x8c0 do_vfs_ioctl+0x170/0xe70 ? ioctl_preallocate+0x170/0x170 ? task_work_run+0xbe/0x160 ? lock_acquire+0x3c0/0x3c0 ? trace_hardirqs_on_caller+0x33f/0x590 ? _raw_spin_unlock_irq+0x2f/0x50 SyS_ioctl+0x36/0x70 ? do_vfs_ioctl+0xe70/0xe70 do_syscall_64+0x18c/0x5d0 entry_SYSCALL_64_after_hwframe+0x26/0x9b RIP: 0033:0x7f2ddf13b587 RSP: 002b:00007fff15c4f9d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f2ddf13b587 RDX: 00007fff15c4fa20 RSI: 0000000040406469 RDI: 0000000000000003 RBP: 00007fff15c4fa20 R08: 0000000000000000 R09: 00007f2ddf3fe120 R10: 0000000000000073 R11: 0000000000000246 R12: 0000000040406469 R13: 0000000000000003 R14: 00007fff15c4fa20 R15: 00000000000000c7 Code: 00 00 00 4a c7 44 22 08 00 00 00 00 42 c7 44 22 10 00 00 00 00 48 81 c4 b8 00 00 00 5b 5d 41 5c 41 5d 41 5e 41 5f c3 0f 0b 0f 0b <0f> 0b 31 c0 eb c0 4c 89 ef e8 9a 09 41 ff e9 1e fe ff ff 4c 89 RIP: drm_mm_scan_color_evict+0x2b8/0x3d0 RSP: ffff880057a573f8 We can trivially relax this assumption by searching the hole_stack for the scan result and warn instead if the driver called us without any result. Fixes: 3fa489da ("drm: Apply tight eviction scanning to color_adjust") Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: <stable@vger.kernel.org> # v4.11+ Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180219113543.8010-1-chris@chris-wilson.co.uk
-
由 Sylwester Nawrocki 提交于
Bit field [2:0] of HDMI_I2S_PIN_SEL_1 corresponds to SDATA_0, not SDATA_2. This patch removes redefinition of HDMI_I2S_SEL_DATA2 constant and adds missing HDMI_I2S_SEL_DATA0. The value of bit field selecting SDATA_1 (pin_sel_3) is also changed, so it is 3 as suggested in the Exynos TRMs. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Corentin Labbe 提交于
Since its inclusion in 2012 via commit bea8a429 ("drm/exynos: add rotator ipp driver") this header is not used by any source files and is empty. Lets just remove it. Signed-off-by: NCorentin Labbe <clabbe@baylibre.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Markus Elfring 提交于
Omit an extra message for a memory allocation failure in these functions. This issue was detected by using the Coccinelle software. Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Wolfram Sang 提交于
Due to a typo, the mask was destroyed by a comparison instead of a bit shift. Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Arnd Bergmann 提交于
The exynos DRM driver uses real-time 'struct timeval' values for exporting its timestamps to user space. This has multiple problems: 1. signed seconds overflow in y2038 2. the 'struct timeval' definition is deprecated in the kernel 3. time may jump or go backwards after a 'settimeofday()' syscall 4. other DRM timestamps are in CLOCK_MONOTONIC domain, so they can't be compared 5. exporting microseconds requires a division by 1000, which may be slow on some architectures. The code existed in two places before, but the IPP portion was removed in 8ded5941 ("drm/exynos: ipp: Remove Exynos DRM IPP subsystem"), so we no longer need to worry about it. Ideally timestamps should just use 64-bit nanoseconds instead, but of course we can't change that now. Instead, this tries to address the first four points above by using monotonic 'timespec' values. According to Tobias Jakobi, user space doesn't care about the timestamp at the moment, so we can change the format. Even if there is something looking at them, it will work just fine with monotonic times as long as the application only looks at the relative values between two events. Link: https://patchwork.kernel.org/patch/10038593/ Cc: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: NArnd Bergmann <arnd@arndb.de> Reviewed-by: NTobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
- 19 2月, 2018 10 次提交
-
-
由 Kai-Heng Feng 提交于
Similar to commit e10aec65 ("drm/edid: Add 6 bpc quirk for display AEO model 0."), the EDID reports "DFP 1.x compliant TMDS" but it support 6bpc instead of 8 bpc. Hence, use 6 bpc quirk for this panel. Fixes: 196f954e ("drm/i915/dp: Revert "drm/i915/dp: fall back to 18 bpp when sink capability is unknown"") BugLink: https://bugs.launchpad.net/bugs/1749420Signed-off-by: NKai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by: NMario Kleiner <mario.kleiner.de@gmail.com> Cc: <stable@vger.kernel.org> # v4.8+ Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180218085359.7817-1-kai.heng.feng@canonical.com
-
由 Jan Luebbe 提交于
The 10/12-bit config used for bayer formats is used for grayscale as well. Signed-off-by: NJan Luebbe <jlu@pengutronix.de> Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
-
由 Philipp Zabel 提交于
Add the missing offset calculation for 16-bit grayscale images. Since the IPU only supports capturing greyscale in raw passthrough mode, it is the same as 16-bit bayer formats. Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
-
由 Tobias Jordan 提交于
Before returning, call of_node_put() for the device node returned by of_parse_phandle(). Fixes: ea9c2605 ("gpu: ipu-v3: add driver for Prefetch Resolve Gasket") Signed-off-by: NTobias Jordan <Tobias.Jordan@elektrobit.com> Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
-
由 Tobias Jordan 提交于
Before returning, call of_node_put() for the device node returned by of_parse_phandle(). Fixes: d2a34232 ("gpu: ipu-v3: add driver for Prefetch Resolve Engine") Signed-off-by: NTobias Jordan <Tobias.Jordan@elektrobit.com> Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 Kconfig fixes from Thomas Gleixner: "Three patchlets to correct HIGHMEM64G and CMPXCHG64 dependencies in Kconfig when CPU selections are explicitely set to M586 or M686" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/Kconfig: Explicitly enumerate i686-class CPUs in Kconfig x86/Kconfig: Exclude i586-class CPUs lacking PAE support from the HIGHMEM64G Kconfig group x86/Kconfig: Add missing i586-class CPUs to the X86_CMPXCHG64 Kconfig group
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf updates from Thomas Gleixner: "Perf tool updates and kprobe fixes: - perf_mmap overwrite mode fixes/overhaul, prep work to get 'perf top' using it, making it bearable to use it in large core count systems such as Knights Landing/Mill Intel systems (Kan Liang) - s/390 now uses syscall.tbl, just like x86-64 to generate the syscall table id -> string tables used by 'perf trace' (Hendrik Brueckner) - Use strtoull() instead of home grown function (Andy Shevchenko) - Synchronize kernel ABI headers, v4.16-rc1 (Ingo Molnar) - Document missing 'perf data --force' option (Sangwon Hong) - Add perf vendor JSON metrics for ARM Cortex-A53 Processor (William Cohen) - Improve error handling and error propagation of ftrace based kprobes so failures when installing kprobes are not silently ignored and create disfunctional tracepoints" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits) kprobes: Propagate error from disarm_kprobe_ftrace() kprobes: Propagate error from arm_kprobe_ftrace() Revert "tools include s390: Grab a copy of arch/s390/include/uapi/asm/unistd.h" perf s390: Rework system call table creation by using syscall.tbl perf s390: Grab a copy of arch/s390/kernel/syscall/syscall.tbl tools/headers: Synchronize kernel ABI headers, v4.16-rc1 perf test: Fix test trace+probe_libc_inet_pton.sh for s390x perf data: Document missing --force option perf tools: Substitute yet another strtoull() perf top: Check the latency of perf_top__mmap_read() perf top: Switch default mode to overwrite mode perf top: Remove lost events checking perf hists browser: Add parameter to disable lost event warning perf top: Add overwrite fall back perf evsel: Expose the perf_missing_features struct perf top: Check per-event overwrite term perf mmap: Discard legacy interface for mmap read perf test: Update mmap read functions for backward-ring-buffer test perf mmap: Introduce perf_mmap__read_event() perf mmap: Introduce perf_mmap__read_done() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull irq updates from Thomas Gleixner: "A small set of updates mostly for irq chip drivers: - MIPS GIC fix for spurious, masked interrupts - fix for a subtle IPI bug in GICv3 - do not probe GICv3 ITSs that are marked as disabled - multi-MSI support for GICv2m - various small cleanups" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqdomain: Re-use DEFINE_SHOW_ATTRIBUTE() macro irqchip/bcm: Remove hashed address printing irqchip/gic-v2m: Add PCI Multi-MSI support irqchip/gic-v3: Ignore disabled ITS nodes irqchip/gic-v3: Use wmb() instead of smb_wmb() in gic_raise_softirq() irqchip/gic-v3: Change pr_debug message to pr_devel irqchip/mips-gic: Avoid spuriously handling masked interrupts
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull core fix from Thomas Gleixner: "A small fix which adds the missing for_each_cpu_wrap() stub for the UP case to avoid build failures" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpumask: Make for_each_cpu_wrap() available on UP as well
-
- 18 2月, 2018 6 次提交
-
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block fixes from Jens Axboe: - NVMe pull request from Keith, with fixes all over the map for nvme. From various folks. - Classic polling fix, that avoids a latency issue where we still end up waiting for an interrupt in some cases. From Nitesh Shetty. - Comment typo fix from Minwoo Im. * tag 'for-linus-20180217' of git://git.kernel.dk/linux-block: block: fix a typo in comment of BLK_MQ_POLL_STATS_BKTS nvme-rdma: fix sysfs invoked reset_ctrl error flow nvmet: Change return code of discard command if not supported nvme-pci: Fix timeouts in connecting state nvme-pci: Remap CMB SQ entries on every controller reset nvme: fix the deadlock in nvme_update_formats blk: optimization for classic polling nvme: Don't use a stack buffer for keep-alive command nvme_fc: cleanup io completion nvme_fc: correct abort race condition on resets nvme: Fix discard buffer overrun nvme: delete NVME_CTRL_LIVE --> NVME_CTRL_CONNECTING transition nvme-rdma: use NVME_CTRL_CONNECTING state to mark init process nvme: rename NVME_CTRL_RECONNECTING state to NVME_CTRL_CONNECTING
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc由 Linus Torvalds 提交于
Pull MMC fixes from Ulf Hansson: - meson-gx: Revert to earlier tuning process - bcm2835: Don't overwrite max frequency unconditionally * tag 'mmc-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: bcm2835: Don't overwrite max frequency unconditionally Revert "mmc: meson-gx: include tx phase in the tuning process"
-
git://git.infradead.org/linux-mtd由 Linus Torvalds 提交于
Pull mtd fixes from Boris Brezillon: - add missing dependency to NAND_MARVELL Kconfig entry - use the appropriate OOB layout in the VF610 driver * tag 'mtd/fixes-for-4.16-rc2' of git://git.infradead.org/linux-mtd: mtd: nand: MTD_NAND_MARVELL should depend on HAS_DMA mtd: nand: vf610: set correct ooblayout
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux由 Linus Torvalds 提交于
Pull powerpc fixes from Michael Ellerman: "The main attraction is a fix for a bug in the new drmem code, which was causing an oops on boot on some versions of Qemu. There's also a fix for XIVE (Power9 interrupt controller) on KVM, as well as a few other minor fixes. Thanks to: Corentin Labbe, Cyril Bur, Cédric Le Goater, Daniel Black, Nathan Fontenot, Nicholas Piggin" * tag 'powerpc-4.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/pseries: Check for zero filled ibm,dynamic-memory property powerpc/pseries: Add empty update_numa_cpu_lookup_table() for NUMA=n powerpc/powernv: IMC fix out of bounds memory access at shutdown powerpc/xive: Use hw CPU ids when configuring the CPU queues powerpc: Expose TSCR via sysfs only on powernv
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux由 Linus Torvalds 提交于
Pull arm64 fixes from Catalin Marinas: "The bulk of this is the pte accessors annotation to READ/WRITE_ONCE (we tried to avoid pushing this during the merge window to avoid conflicts) - Updated the page table accessors to use READ/WRITE_ONCE and prevent compiler transformation that could lead to an apparent loss of coherency - Enabled branch predictor hardening for the Falkor CPU - Fix interaction between kpti enabling and KASan causing the recursive page table walking to take a significant time - Fix some sparse warnings" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: cputype: Silence Sparse warnings arm64: mm: Use READ_ONCE/WRITE_ONCE when accessing page tables arm64: proc: Set PTE_NG for table entries to avoid traversing them twice arm64: Add missing Falkor part number for branch predictor hardening
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip由 Linus Torvalds 提交于
Pull xen fixes from Juergen Gross: - fixes for the Xen pvcalls frontend driver - fix for booting Xen pv domains - fix for the xenbus driver user interface * tag 'for-linus-4.16a-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: pvcalls-front: wait for other operations to return when release passive sockets pvcalls-front: introduce a per sock_mapping refcount x86/xen: Calculate __max_logical_packages on PV domains xenbus: track caller request id
-
- 17 2月, 2018 9 次提交
-
-
由 Stefano Stabellini 提交于
Passive sockets can have ongoing operations on them, specifically, we have two wait_event_interruptable calls in pvcalls_front_accept. Add two wake_up calls in pvcalls_front_release, then wait for the potential waiters to return and release the sock_mapping refcount. Signed-off-by: NStefano Stabellini <stefano@aporeto.com> Acked-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Stefano Stabellini 提交于
Introduce a per sock_mapping refcount, in addition to the existing global refcount. Thanks to the sock_mapping refcount, we can safely wait for it to be 1 in pvcalls_front_release before freeing an active socket, instead of waiting for the global refcount to be 1. Signed-off-by: NStefano Stabellini <stefano@aporeto.com> Acked-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Prarit Bhargava 提交于
The kernel panics on PV domains because native_smp_cpus_done() is only called for HVM domains. Calculate __max_logical_packages for PV domains. Fixes: b4c0a732 ("x86/smpboot: Fix __max_logical_packages estimate") Signed-off-by: NPrarit Bhargava <prarit@redhat.com> Tested-and-reported-by: NSimon Gaiser <simon@invisiblethingslab.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Juergen Gross <jgross@suse.com> Cc: Dou Liyang <douly.fnst@cn.fujitsu.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: xen-devel@lists.xenproject.org Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Joao Martins 提交于
Commit fd8aa909 ("xen: optimize xenbus driver for multiple concurrent xenstore accesses") optimized xenbus concurrent accesses but in doing so broke UABI of /dev/xen/xenbus. Through /dev/xen/xenbus applications are in charge of xenbus message exchange with the correct header and body. Now, after the mentioned commit the replies received by application will no longer have the header req_id echoed back as it was on request (see specification below for reference), because that particular field is being overwritten by kernel. struct xsd_sockmsg { uint32_t type; /* XS_??? */ uint32_t req_id;/* Request identifier, echoed in daemon's response. */ uint32_t tx_id; /* Transaction id (0 if not related to a transaction). */ uint32_t len; /* Length of data following this. */ /* Generally followed by nul-terminated string(s). */ }; Before there was only one request at a time so req_id could simply be forwarded back and forth. To allow simultaneous requests we need a different req_id for each message thus kernel keeps a monotonic increasing counter for this field and is written on every request irrespective of userspace value. Forwarding again the req_id on userspace requests is not a solution because we would open the possibility of userspace-generated req_id colliding with kernel ones. So this patch instead takes another route which is to artificially keep user req_id while keeping the xenbus logic as is. We do that by saving the original req_id before xs_send(), use the private kernel counter as req_id and then once reply comes and was validated, we restore back the original req_id. Cc: <stable@vger.kernel.org> # 4.11 Fixes: fd8aa909 ("xen: optimize xenbus driver for multiple concurrent xenstore accesses") Reported-by: NBhavesh Davda <bhavesh.davda@oracle.com> Signed-off-by: NJoao Martins <joao.m.martins@oracle.com> Reviewed-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Robin Murphy 提交于
Sparse makes a fair bit of noise about our MPIDR mask being implicitly long - let's explicitly describe it as such rather than just relying on the value forcing automatic promotion. Signed-off-by: NRobin Murphy <robin.murphy@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Lukas Wunner 提交于
amdgpu's ->runtime_suspend hook calls drm_kms_helper_poll_disable(), which waits for the output poll worker to finish if it's running. The output poll worker meanwhile calls pm_runtime_get_sync() in amdgpu's ->detect hooks, which waits for the ongoing suspend to finish, causing a deadlock. Fix by not acquiring a runtime PM ref if the ->detect hooks are called in the output poll worker's context. This is safe because the poll worker is only enabled while runtime active and we know that ->runtime_suspend waits for it to finish. Fixes: d38ceaf9 ("drm/amdgpu: add core driver (v4)") Cc: stable@vger.kernel.org # v4.2+: 27d4ee03: workqueue: Allow retrieval of current task's work struct Cc: stable@vger.kernel.org # v4.2+: 25c058cc: drm: Allow determining if current task is output poll worker Cc: Alex Deucher <alexander.deucher@amd.com> Tested-by: NMike Lothian <mike@fireburn.co.uk> Reviewed-by: NLyude Paul <lyude@redhat.com> Signed-off-by: NLukas Wunner <lukas@wunner.de> Link: https://patchwork.freedesktop.org/patch/msgid/4c9bf72aacae1eef062bd134cd112e0770a7f121.1518338789.git.lukas@wunner.de
-
由 Lukas Wunner 提交于
radeon's ->runtime_suspend hook calls drm_kms_helper_poll_disable(), which waits for the output poll worker to finish if it's running. The output poll worker meanwhile calls pm_runtime_get_sync() in radeon's ->detect hooks, which waits for the ongoing suspend to finish, causing a deadlock. Fix by not acquiring a runtime PM ref if the ->detect hooks are called in the output poll worker's context. This is safe because the poll worker is only enabled while runtime active and we know that ->runtime_suspend waits for it to finish. Stack trace for posterity: INFO: task kworker/0:3:31847 blocked for more than 120 seconds Workqueue: events output_poll_execute [drm_kms_helper] Call Trace: schedule+0x3c/0x90 rpm_resume+0x1e2/0x690 __pm_runtime_resume+0x3f/0x60 radeon_lvds_detect+0x39/0xf0 [radeon] output_poll_execute+0xda/0x1e0 [drm_kms_helper] process_one_work+0x14b/0x440 worker_thread+0x48/0x4a0 INFO: task kworker/2:0:10493 blocked for more than 120 seconds. Workqueue: pm pm_runtime_work Call Trace: schedule+0x3c/0x90 schedule_timeout+0x1b3/0x240 wait_for_common+0xc2/0x180 wait_for_completion+0x1d/0x20 flush_work+0xfc/0x1a0 __cancel_work_timer+0xa5/0x1d0 cancel_delayed_work_sync+0x13/0x20 drm_kms_helper_poll_disable+0x1f/0x30 [drm_kms_helper] radeon_pmops_runtime_suspend+0x3d/0xa0 [radeon] pci_pm_runtime_suspend+0x61/0x1a0 vga_switcheroo_runtime_suspend+0x21/0x70 __rpm_callback+0x32/0x70 rpm_callback+0x24/0x80 rpm_suspend+0x12b/0x640 pm_runtime_work+0x6f/0xb0 process_one_work+0x14b/0x440 worker_thread+0x48/0x4a0 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94147 Fixes: 10ebc0bc ("drm/radeon: add runtime PM support (v2)") Cc: stable@vger.kernel.org # v3.13+: 27d4ee03: workqueue: Allow retrieval of current task's work struct Cc: stable@vger.kernel.org # v3.13+: 25c058cc: drm: Allow determining if current task is output poll worker Cc: Ismo Toijala <ismo.toijala@gmail.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Dave Airlie <airlied@redhat.com> Reviewed-by: NLyude Paul <lyude@redhat.com> Signed-off-by: NLukas Wunner <lukas@wunner.de> Link: https://patchwork.freedesktop.org/patch/msgid/64ea02c44f91dda19bc563902b97bbc699040392.1518338789.git.lukas@wunner.de
-
由 Lukas Wunner 提交于
nouveau's ->runtime_suspend hook calls drm_kms_helper_poll_disable(), which waits for the output poll worker to finish if it's running. The output poll worker meanwhile calls pm_runtime_get_sync() in nouveau_connector_detect() which waits for the ongoing suspend to finish, causing a deadlock. Fix by not acquiring a runtime PM ref if nouveau_connector_detect() is called in the output poll worker's context. This is safe because the poll worker is only enabled while runtime active and we know that ->runtime_suspend waits for it to finish. Other contexts calling nouveau_connector_detect() do require a runtime PM ref, these comprise: status_store() drm sysfs interface ->fill_modes drm callback drm_fb_helper_probe_connector_modes() drm_mode_getconnector() nouveau_connector_hotplug() nouveau_display_hpd_work() nv17_tv_set_property() Stack trace for posterity: INFO: task kworker/0:1:58 blocked for more than 120 seconds. Workqueue: events output_poll_execute [drm_kms_helper] Call Trace: schedule+0x28/0x80 rpm_resume+0x107/0x6e0 __pm_runtime_resume+0x47/0x70 nouveau_connector_detect+0x7e/0x4a0 [nouveau] nouveau_connector_detect_lvds+0x132/0x180 [nouveau] drm_helper_probe_detect_ctx+0x85/0xd0 [drm_kms_helper] output_poll_execute+0x11e/0x1c0 [drm_kms_helper] process_one_work+0x184/0x380 worker_thread+0x2e/0x390 INFO: task kworker/0:2:252 blocked for more than 120 seconds. Workqueue: pm pm_runtime_work Call Trace: schedule+0x28/0x80 schedule_timeout+0x1e3/0x370 wait_for_completion+0x123/0x190 flush_work+0x142/0x1c0 nouveau_pmops_runtime_suspend+0x7e/0xd0 [nouveau] pci_pm_runtime_suspend+0x5c/0x180 vga_switcheroo_runtime_suspend+0x1e/0xa0 __rpm_callback+0xc1/0x200 rpm_callback+0x1f/0x70 rpm_suspend+0x13c/0x640 pm_runtime_work+0x6e/0x90 process_one_work+0x184/0x380 worker_thread+0x2e/0x390 Bugzilla: https://bugs.archlinux.org/task/53497 Bugzilla: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=870523 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70388#c33 Fixes: 5addcf0a ("nouveau: add runtime PM support (v0.9)") Cc: stable@vger.kernel.org # v3.12+: 27d4ee03: workqueue: Allow retrieval of current task's work struct Cc: stable@vger.kernel.org # v3.12+: 25c058cc: drm: Allow determining if current task is output poll worker Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Dave Airlie <airlied@redhat.com> Reviewed-by: NLyude Paul <lyude@redhat.com> Signed-off-by: NLukas Wunner <lukas@wunner.de> Link: https://patchwork.freedesktop.org/patch/msgid/b7d2cbb609a80f59ccabfdf479b9d5907c603ea1.1518338789.git.lukas@wunner.de
-
由 Lukas Wunner 提交于
Introduce a helper to determine if the current task is an output poll worker. This allows us to fix a long-standing deadlock in several DRM drivers wherein the ->runtime_suspend callback waits for the output poll worker to finish and the worker in turn calls a ->detect callback which waits for runtime suspend to finish. The ->detect callback is invoked from multiple call sites and waiting for runtime suspend to finish is the correct thing to do except if it's executing in the context of the worker. v2: Expand kerneldoc to specifically mention deadlock between output poll worker and autosuspend worker as use case. (Lyude) Cc: Dave Airlie <airlied@redhat.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: NLyude Paul <lyude@redhat.com> Signed-off-by: NLukas Wunner <lukas@wunner.de> Link: https://patchwork.freedesktop.org/patch/msgid/3549ce32e7f1467102e70d3e9cbf70c46bfe108e.1518593424.git.lukas@wunner.de
-