This allows a device to register its supported address regions.
Each address region can be accessed directly for example reading
the snapshots taken of this address space.
Drivers are not limited in the name selection for different regions.
An example of a region-name can be: pci cr-space, register-space.
Signed-off-by: NAlex Vesker <valex@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Following crash occurs in validate_xmit_skb_list() when same skb is
iterated multiple times in the loop and consume_skb() is called.

The root cause is calling list_del_init(&skb->list) and not clearing
skb->next in d4546c25. list_del_init(&skb->list) sets skb->next
to point to skb itself. skb->next needs to be cleared because other
parts of network stack uses another kind of SKB lists.
validate_xmit_skb_list() uses such list.

A similar type of bugfix was reported by Jesper Dangaard Brouer.
https://patchwork.ozlabs.org/patch/942541/

This patch clears skb->next and changes list_del_init() to list_del()
so that list->prev will maintain the list poison.

[  148.185511] ==================================================================
[  148.187865] BUG: KASAN: use-after-free in validate_xmit_skb_list+0x4b/0xa0
[  148.190158] Read of size 8 at addr ffff8801e52eefc0 by task swapper/1/0
[  148.192940]
[  148.193642] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.18.0-rc3+ #25
[  148.195423] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20180531_142017-buildhw-08.phx2.fedoraproject.org-1.fc28 04/01/2014
[  148.199129] Call Trace:
[  148.200565]  <IRQ>
[  148.201911]  dump_stack+0xc6/0x14c
[  148.203572]  ? dump_stack_print_info.cold.1+0x2f/0x2f
[  148.205083]  ? kmsg_dump_rewind_nolock+0x59/0x59
[  148.206307]  ? validate_xmit_skb+0x2c6/0x560
[  148.207432]  ? debug_show_held_locks+0x30/0x30
[  148.208571]  ? validate_xmit_skb_list+0x4b/0xa0
[  148.211144]  print_address_description+0x6c/0x23c
[  148.212601]  ? validate_xmit_skb_list+0x4b/0xa0
[  148.213782]  kasan_report.cold.6+0x241/0x2fd
[  148.214958]  validate_xmit_skb_list+0x4b/0xa0
[  148.216494]  sch_direct_xmit+0x1b0/0x680
[  148.217601]  ? dev_watchdog+0x4e0/0x4e0
[  148.218675]  ? do_raw_spin_trylock+0x10/0x120
[  148.219818]  ? do_raw_spin_lock+0xe0/0xe0
[  148.221032]  __dev_queue_xmit+0x1167/0x1810
[  148.222155]  ? sched_clock+0x5/0x10
[...]

[  148.474257] Allocated by task 0:
[  148.475363]  kasan_kmalloc+0xbf/0xe0
[  148.476503]  kmem_cache_alloc+0xb4/0x1b0
[  148.477654]  __build_skb+0x91/0x250
[  148.478677]  build_skb+0x67/0x180
[  148.479657]  e1000_clean_rx_irq+0x542/0x8a0
[  148.480757]  e1000_clean+0x652/0xd10
[  148.481772]  net_rx_action+0x4ea/0xc20
[  148.482808]  __do_softirq+0x1f9/0x574
[  148.483831]
[  148.484575] Freed by task 0:
[  148.485504]  __kasan_slab_free+0x12e/0x180
[  148.486589]  kmem_cache_free+0xb4/0x240
[  148.487634]  kfree_skbmem+0xed/0x150
[  148.488648]  consume_skb+0x146/0x250
[  148.489665]  validate_xmit_skb+0x2b7/0x560
[  148.490754]  validate_xmit_skb_list+0x70/0xa0
[  148.491897]  sch_direct_xmit+0x1b0/0x680
[  148.493949]  __dev_queue_xmit+0x1167/0x1810
[  148.495103]  br_dev_queue_push_xmit+0xce/0x250
[  148.496196]  br_forward_finish+0x276/0x280
[  148.497234]  __br_forward+0x44f/0x520
[  148.498260]  br_forward+0x19f/0x1b0
[  148.499264]  br_handle_frame_finish+0x65e/0x980
[  148.500398]  NF_HOOK.constprop.10+0x290/0x2a0
[  148.501522]  br_handle_frame+0x417/0x640
[  148.502582]  __netif_receive_skb_core+0xaac/0x18f0
[  148.503753]  __netif_receive_skb_one_core+0x98/0x120
[  148.504958]  netif_receive_skb_internal+0xe3/0x330
[  148.506154]  napi_gro_complete+0x190/0x2a0
[  148.507243]  dev_gro_receive+0x9f7/0x1100
[  148.508316]  napi_gro_receive+0xcb/0x260
[  148.509387]  e1000_clean_rx_irq+0x2fc/0x8a0
[  148.510501]  e1000_clean+0x652/0xd10
[  148.511523]  net_rx_action+0x4ea/0xc20
[  148.512566]  __do_softirq+0x1f9/0x574
[  148.513598]
[  148.514346] The buggy address belongs to the object at ffff8801e52eefc0
[  148.514346]  which belongs to the cache skbuff_head_cache of size 232
[  148.517047] The buggy address is located 0 bytes inside of
[  148.517047]  232-byte region [ffff8801e52eefc0, ffff8801e52ef0a8)
[  148.519549] The buggy address belongs to the page:
[  148.520726] page:ffffea000794bb00 count:1 mapcount:0 mapping:ffff880106f4dfc0 index:0xffff8801e52ee840 compound_mapcount: 0
[  148.524325] flags: 0x17ffffc0008100(slab|head)
[  148.525481] raw: 0017ffffc0008100 ffff880106b938d0 ffff880106b938d0 ffff880106f4dfc0
[  148.527503] raw: ffff8801e52ee840 0000000000190011 00000001ffffffff 0000000000000000
[  148.529547] page dumped because: kasan: bad access detected

Fixes: d4546c25 ("net: Convert GRO SKB handling to list_head.")
Signed-off-by: NPrashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Reported-by: NTyler Hicks <tyhicks@canonical.com>
Tested-by: NTyler Hicks <tyhicks@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

__netif_receive_skb_core can free the skb, so we have to use the dequeue-
 enqueue model when calling it from __netif_receive_skb_list_core.

Fixes: 88eb1944 ("net: core: propagate SKB lists through packet_type lookup")
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In netif_receive_skb_list_internal(), all of skb_defer_rx_timestamp(),
 do_xdp_generic() and enqueue_to_backlog() can lead to kfree(skb).  Thus,
 we cannot wait until after they return to remove the skb from the list;
 instead, we remove it first and, in the pass case, add it to a sublist
 afterwards.
In the case of enqueue_to_backlog() we have already decided not to pass
 when we call the function, so we do not need a sublist.

Fixes: 7da517a3 ("net: core: Another step of skb receive list processing")
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For most of these calls we can just pass NULL through to the fallback
function as the sb_dev. The only cases where we cannot are the cases where
we might be dealing with either an upper device or a driver that would
have configured things to support an sb_dev itself.

The only driver that has any significant change in this patch set should be
ixgbe as we can drop the redundant functionality that existed in both the
ndo_select_queue function and the fallback function that was passed through
to us.
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch makes it so that instead of passing a void pointer as the
accel_priv we instead pass a net_device pointer as sb_dev. Making this
change allows us to pass the subordinate device through to the fallback
function eventually so that we can keep the actual code in the
ndo_select_queue call as focused on possible on the exception cases.
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch adds a generic version of the ndo_select_queue functions for
either returning 0 or selecting a queue based on the processor ID. This is
generally meant to just reduce the number of functions we have to change
in the future when we have to deal with ndo_select_queue changes.
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This change makes it so that we can support the concept of subordinate
device traffic classes to the core networking code. In doing this we can
start pulling out the driver specific bits needed to support selecting a
queue based on an upper device.

The solution at is currently stands is only partially implemented. I have
the start of some XPS bits in here, but I would still need to allow for
configuration of the XPS maps on the queues reserved for the subordinate
devices. For now I am using the reference to the sb_dev XPS map as just a
way to skip the lookup of the lower device XPS map for now as that would
result in the wrong queue being picked.
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch is meant to provide the basic tools needed to allow us to create
subordinate device traffic classes. The general idea here is to allow
subdividing the queues of a device into queue groups accessible through an
upper device such as a macvlan.

The idea here is to enforce the idea that an upper device has to be a
single queue device, ideally with IFF_NO_QUQUE set. With that being the
case we can pretty much guarantee that the tc_to_txq mappings and XPS maps
for the upper device are unused. As such we could reuse those in order to
support subdividing the lower device and distributing those queues between
the subordinate devices.

In order to distinguish between a regular set of traffic classes and if a
device is carrying subordinate traffic classes I changed num_tc from a u8
to a s16 value and use the negative values to represent the subordinate
pool values. So starting at -1 and running to -32768 we can encode those as
pool values, and the existing values of 0 to 15 can be maintained.
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch makes it so that we do not report the traffic class or allow XPS
configuration on single queue devices. This is mostly to avoid unnecessary
complexity with changes I have planned that will allow us to reuse
the unused tc_to_txq and XPS configuration on a single queue device to
allow it to make use of a subset of queues on an underlying device.
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Dissect the QinQ packets to get both outer and inner vlan information,
then store to the extended flow keys.
Signed-off-by: NJianbo Liu <jianbol@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Change vlan dissector key to save vlan tpid to support both 802.1Q
and 802.1AD ethertype.
Signed-off-by: NJianbo Liu <jianbol@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

rtnl_configure_link sets dev->rtnl_link_state to
RTNL_LINK_INITIALIZED and unconditionally calls
__dev_notify_flags to notify user-space of dev flags.

current call sequence for rtnl_configure_link
rtnetlink_newlink
    rtnl_link_ops->newlink
    rtnl_configure_link (unconditionally notifies userspace of
                         default and new dev flags)

If a newlink handler wants to call rtnl_configure_link
early, we will end up with duplicate notifications to
user-space.

This patch fixes rtnl_configure_link to check rtnl_link_state
and call __dev_notify_flags with gchanges = 0 if already
RTNL_LINK_INITIALIZED.

Later in the series, this patch will help the following sequence
where a driver implementing newlink can call rtnl_configure_link
to initialize the link early.

makes the following call sequence work:
rtnetlink_newlink
    rtnl_link_ops->newlink (vxlan) -> rtnl_configure_link (initializes
                                                link and notifies
                                                user-space of default
                                                dev flags)
    rtnl_configure_link (updates dev flags if requested by user ifm
                         and notifies user-space of new dev flags)
Signed-off-by: NRoopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Warning level 2 was used: -Wimplicit-fallthrough=2
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

enable_sriov - Enables Single-Root Input/Output Virtualization(SR-IOV)
characteristic of the device.
Reviewed-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add 2 first generic parameters to devlink configuration parameters set:
internal_err_reset - When set enables reset device on internal errors.
max_macs - max number of MACs per ETH port.
Signed-off-by: NMoshe Shemesh <moshe@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add devlink_param_notify() function to support devlink param notifications.
Add notification call to devlink param set, register and unregister
functions.
Add devlink_param_value_changed() function to enable the driver notify
devlink on value change. Driver should use this function after value was
changed on any configuration mode part to driverinit.
Signed-off-by: NMoshe Shemesh <moshe@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

"driverinit" configuration mode value is held by devlink to enable
the driver query the value after reload. Two additional functions
added to help the driver get/set the value from/to devlink:
devlink_param_driverinit_value_set() and
devlink_param_driverinit_value_get().
Signed-off-by: NMoshe Shemesh <moshe@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add param set command to set value for a parameter.
Value can be set to any of the supported configuration modes.
Signed-off-by: NMoshe Shemesh <moshe@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add param get command which gets data per parameter.
Option to dump the parameters data per device.
Signed-off-by: NMoshe Shemesh <moshe@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Define configuration parameters data structure.
Add functions to register and unregister the driver supported
configuration parameters table.
For each parameter registered, the driver should fill all the parameter's
fields. In case the only supported configuration mode is "driverinit"
the parameter's get()/set() functions are not required and should be set
to NULL, for any other configuration mode, these functions are required
and should be set by the driver.
Signed-off-by: NMoshe Shemesh <moshe@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After commit 07d78363 ("net: Convert NAPI gro list into a small hash
table.")' there is 8 hash buckets, which allows more flows to be held for
merging.  but MAX_GRO_SKBS, the total held skb for merging, is 8 skb still,
limit the hash table performance.

keep MAX_GRO_SKBS as 8 skb, but limit each hash list length to 8 skb, not
the total 8 skb
Signed-off-by: NLi RongQing <lirongqing@baidu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the socket error queue for reporting dropped packets if the
socket has enabled that feature through the SO_TXTIME API.

Packets are dropped either on enqueue() if they aren't accepted by the
qdisc or on dequeue() if the system misses their deadline. Those are
reported as different errors so applications can react accordingly.

Userspace can retrieve the errors through the socket error queue and the
corresponding cmsg interfaces. A struct sock_extended_err* is used for
returning the error data, and the packet's timestamp can be retrieved by
adding both ee_data and ee_info fields as e.g.:

    ((__u64) serr->ee_data << 32) + serr->ee_info

This feature is disabled by default and must be explicitly enabled by
applications. Enabling it can bring some overhead for the Tx cycles
of the application.
Signed-off-by: NJesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch introduces SO_TXTIME. User space enables this option in
order to pass a desired future transmit time in a CMSG when calling
sendmsg(2). The argument to this socket option is a 8-bytes long struct
provided by the uapi header net_tstamp.h defined as:

struct sock_txtime {
	clockid_t 	clockid;
	u32		flags;
};

Note that new fields were added to struct sock by filling a 2-bytes
hole found in the struct. For that reason, neither the struct size or
number of cachelines were altered.
Signed-off-by: NRichard Cochran <rcochran@linutronix.de>
Signed-off-by: NJesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is done in preparation for the upcoming time based transmission
patchset. Now that skb->tstamp will be used to hold packet's txtime,
we must ensure that it is being cleared when traversing namespaces.
Also, doing that from skb_scrub_packet() before the early return would
break our feature when tunnels are used.
Signed-off-by: NJesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Generally the check should be very cheap, as the sk_buff_head is in cache.
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Also involved adding a way to run a netfilter hook over a list of packets.
 Rather than attempting to make netfilter know about lists (which would be
 a major project in itself) we just let it call the regular okfn (in this
 case ip_rcv_finish()) for any packets it steals, and have it give us back
 a list of packets it's synchronously accepted (which normally NF_HOOK
 would automatically call okfn() on, but we want to be able to potentially
 pass the list to a listified version of okfn().)
The netfilter hooks themselves are indirect calls that still happen per-
 packet (see nf_hook_entry_hookfn()), but again, changing that can be left
 for future work.

There is potential for out-of-order receives if the netfilter hook ends up
 synchronously stealing packets, as they will be processed before any
 accepts earlier in the list.  However, it was already possible for an
 asynchronous accept to cause out-of-order receives, so presumably this is
 considered OK.
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

__netif_receive_skb_core() does a depressingly large amount of per-packet
 work that can't easily be listified, because the another_round looping
 makes it nontrivial to slice up into smaller functions.
Fortunately, most of that work disappears in the fast path:
 * Hardware devices generally don't have an rx_handler
 * Unless you're tcpdumping or something, there is usually only one ptype
 * VLAN processing comes before the protocol ptype lookup, so doesn't force
   a pt_prev deliver
 so normally, __netif_receive_skb_core() will run straight through and pass
 back the one ptype found in ptype_base[hash of skb->protocol].
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

First example of a layer splitting the list (rather than merely taking
 individual packets off it).
Involves new list.h function, list_cut_before(), like list_cut_position()
 but cuts on the other side of the given entry.
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

netif_receive_skb_list_internal() now processes a list and hands it
 on to the next function.
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Just calls netif_receive_skb() in a loop.
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently trace_sock_exceed_buf_limit() only show rmem info,
but wmem limit may also be hit.
So expose wmem info in this tracepoint as well.

Regarding memcg, I think it is better to introduce a new tracepoint(if
that is needed), i.e. trace_memcg_limit_hit other than show memcg info in
trace_sock_exceed_buf_limit.
Signed-off-by: NYafang Shao <laoar.shao@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Extend transmit queue sysfs attribute to configure Rx queue(s) map
per Tx queue. By default no receive queues are configured for the
Tx queue.

- /sys/class/net/eth0/queues/tx-*/xps_rxqs
Signed-off-by: NAmritha Nambiar <amritha.nambiar@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds support to pick Tx queue based on the Rx queue(s) map
configuration set by the admin through the sysfs attribute
for each Tx queue. If the user configuration for receive queue(s) map
does not apply, then the Tx queue selection falls back to CPU(s) map
based selection and finally to hashing.
Signed-off-by: NAmritha Nambiar <amritha.nambiar@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds a new field to sock_common 'skc_rx_queue_mapping'
which holds the receive queue number for the connection. The Rx queue
is marked in tcp_finish_connect() to allow a client app to do
SO_INCOMING_NAPI_ID after a connect() call to get the right queue
association for a socket. Rx queue is also marked in tcp_conn_request()
to allow syn-ack to go on the right tx-queue associated with
the queue on which syn is received.
Signed-off-by: NAmritha Nambiar <amritha.nambiar@intel.com>
Signed-off-by: NSridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use static_key for XPS maps to reduce the cost of extra map checks,
similar to how it is used for RPS and RFS. This includes static_key
'xps_needed' for XPS and another for 'xps_rxqs_needed' for XPS using
Rx queues map.
Signed-off-by: NAmritha Nambiar <amritha.nambiar@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Refactor XPS code to support Tx queue selection based on
CPU(s) map or Rx queue(s) map.
Signed-off-by: NAmritha Nambiar <amritha.nambiar@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After commit f9d4b0c1 ("fib_rules: move common handling of newrule
delrule msgs into fib_nl2rule"), rule_exists got replaced by rule_find
for existing rule lookup in both the add and del paths. While this
is good for the delete path, it solves a few problems but opens up
a few invalid key matches in the add path.

$ip -4 rule add table main tos 10 fwmark 1
$ip -4 rule add table main tos 10
RTNETLINK answers: File exists

The problem here is rule_find does not check if the key masks in
the new and old rule are the same and hence ends up matching a more
secific rule. Rule key masks cannot be easily compared today without
an elaborate if-else block. Its best to introduce key masks for easier
and accurate rule comparison in the future. Until then, due to fear of
regressions this patch re-introduces older loose rule_exists during add.
Also fixes both rule_exists and rule_find to cover missing attributes.

Fixes: f9d4b0c1 ("fib_rules: move common handling of newrule delrule msgs into fib_nl2rule")
Signed-off-by: NRoopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As noticed by Eric, we need to switch to the helper
dev_change_tx_queue_len() for SIOCSIFTXQLEN call path too,
otheriwse still miss dev_qdisc_change_tx_queue_len().

Fixes: 6a643ddb ("net: introduce helper dev_change_tx_queue_len()")
Reported-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>