Currently dma_mapping_error returns a boolean as int, with 1 meaning
error.  This is rather unusual and many callers have to convert it to
errno value.  The callers are highly inconsistent with error codes
ranging from -ENOMEM over -EIO, -EINVAL and -EFAULT ranging to -EAGAIN.
Return -ENOMEM which seems to be what the largest number of callers
convert it to, and which also matches the typical error case where
we are out of resources.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NRussell King <rmk+kernel@armlinux.org.uk>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>

No users left except for vmd which just forwards it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>

Return DMA_MAPPING_ERROR instead of 0 on a dma mapping failure and let
the core dma-mapping code handle the rest.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>

Return DMA_MAPPING_ERROR instead of 0 on a dma mapping failure and let
the core dma-mapping code handle the rest.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>

Return DMA_MAPPING_ERROR instead of 0 on a dma mapping failure and let
the core dma-mapping code handle the rest.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pass the page + offset to the low-level __iommu_map_single helper
(which gets renamed to fit the new calling conventions) as both
callers have the page at hand.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>

Return DMA_MAPPING_ERROR instead of 0 on a dma mapping failure and let
the core dma-mapping code handle the rest.

Note that the existing code used AMD_IOMMU_MAPPING_ERROR to check from
a 0 return from the IOVA allocator, which is replaced with an explicit
0 as in the implementation and other users of that interface.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>

Return DMA_MAPPING_ERROR instead of the magic bad_dma_addr on a dma
mapping failure and let the core dma-mapping code handle the rest.

Remove the magic EMERGENCY_PAGES that the bad_dma_addr gets redirected to.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>

Return DMA_MAPPING_ERROR instead of the magic bad_dma_addr on a dma
mapping failure and let the core dma-mapping code handle the rest.

Remove the magic EMERGENCY_PAGES that the bad_dma_addr gets redirected to.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>

Return DMA_MAPPING_ERROR instead of 0 on a dma mapping failure and let
the core dma-mapping code handle the rest.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>

Return DMA_MAPPING_ERROR instead of 0 on a dma mapping failure and let
the core dma-mapping code handle the rest.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove the odd sba_{un,}map_single_attrs wrappers, check errors
everywhere.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>

Return DMA_MAPPING_ERROR instead of 0 on a dma mapping failure and let
the core dma-mapping code handle the rest.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>

Just return DMA_MAPPING_ERROR from __dummy_map_page and let the core
dma-mapping code handle the rest.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>

The SBA iommu code already returns (~(dma_addr_t)0x0) on mapping
failures, so we can switch over to returning DMA_MAPPING_ERROR and let
the core dma-mapping code handle the rest.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>

The CCIO iommu code already returns (~(dma_addr_t)0x0) on mapping
failures, so we can switch over to returning DMA_MAPPING_ERROR and let
the core dma-mapping code handle the rest.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>

Sparc already returns (~(dma_addr_t)0x0) on mapping failures, so we can
switch over to returning DMA_MAPPING_ERROR and let the core dma-mapping
code handle the rest.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>

S390 already returns (~(dma_addr_t)0x0) on mapping failures, so we can
switch over to returning DMA_MAPPING_ERROR and let the core dma-mapping
code handle the rest.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>

The Jazz iommu code already returns (~(dma_addr_t)0x0) on mapping
failures, so we can switch over to returning DMA_MAPPING_ERROR and
let the core dma-mapping code handle the rest.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>

The powerpc iommu code already returns (~(dma_addr_t)0x0) on mapping
failures, so we can switch over to returning DMA_MAPPING_ERROR and let
the core dma-mapping code handle the rest.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>

Arm already returns (~(dma_addr_t)0x0) on mapping failures, so we can
switch over to returning DMA_MAPPING_ERROR and let the core dma-mapping
code handle the rest.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NRussell King <rmk+kernel@armlinux.org.uk>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>

The dma-direct code already returns (~(dma_addr_t)0x0) on mapping
failures, so we can switch over to returning DMA_MAPPING_ERROR and let
the core dma-mapping code handle the rest.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>

Error handling of the dma_map_single and dma_map_page APIs is a little
problematic at the moment, in that we use different encodings in the
returned dma_addr_t to indicate an error.  That means we require an
additional indirect call to figure out if a dma mapping call returned
an error, and a lot of boilerplate code to implement these semantics.

Instead return the maximum addressable value as the error.  As long
as we don't allow mapping single-byte ranges with single-byte alignment
this value can never be a valid return.  Additionaly if drivers do
not check the return value from the dma_map* routines this values means
they will generally not be pointed to actual memory.

Once the default value is added here we can start removing the
various mapping_error methods and just rely on this generic check.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NRobin Murphy <robin.murphy@arm.com>
Acked-by: NRussell King <rmk+kernel@armlinux.org.uk>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit bfd56cd6 ("dma-mapping: support highmem in the generic remap
allocator") replaced dma_direct_alloc_pages() with __dma_direct_alloc_pages(),
which doesn't set dma_handle and zero allocated memory. Fix it by doing this
directly in the caller function.

Fixes: bfd56cd6 ("dma-mapping: support highmem in the generic remap allocator")
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Tested-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The csky code was largely copied from arm/arm64, so switch to the
generic arm64-based implementation instead.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NGuo Ren <ren_guo@c-sky.com>

csky does not implement ZONE_DMA, which means passing GFP_DMA is a no-op.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NGuo Ren <ren_guo@c-sky.com>

This option is gone past Linux 4.19.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NGuo Ren <ren_guo@c-sky.com>

Do not waste vmalloc space on allocations that do not require a mapping
into the kernel address space.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NRobin Murphy <robin.murphy@arm.com>

By using __dma_direct_alloc_pages we can deal entirely with struct page
instead of having to derive a kernel virtual address.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NRobin Murphy <robin.murphy@arm.com>

The arm64 codebase to implement coherent dma allocation for architectures
with non-coherent DMA is a good start for a generic implementation, given
that is uses the generic remap helpers, provides the atomic pool for
allocations that can't sleep and still is realtively simple and well
tested.  Move it to kernel/dma and allow architectures to opt into it
using a config symbol.  Architectures just need to provide a new
arch_dma_prep_coherent helper to writeback an invalidate the caches
for any memory that gets remapped for uncached access.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NWill Deacon <will.deacon@arm.com>
Reviewed-by: NRobin Murphy <robin.murphy@arm.com>

The dma remap code only makes sense for not cache coherent architectures
(or possibly the corner case of highmem CMA allocations) and currently
is only used by arm, arm64, csky and xtensa.  Split it out into a
separate file with a separate Kconfig symbol, which gets the right
copyright notice given that this code was written by Laura Abbott
working for Code Aurora at that point.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NLaura Abbott <labbott@redhat.com>
Reviewed-by: NRobin Murphy <robin.murphy@arm.com>

dma_alloc_from_contiguous can return highmem pages depending on the
setup, which a plain non-remapping DMA allocator can't handle.  Detect
this case and fail the allocation.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NRobin Murphy <robin.murphy@arm.com>

Some architectures support remapping highmem into DMA coherent
allocations.  To use the common code for them we need variants of
dma_direct_{alloc,free}_pages that do not use kernel virtual addresses.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NRobin Murphy <robin.murphy@arm.com>

The function dma_set_max_seg_size() can return either 0 on success or
-EIO on error. Change its return type from unsigned int to int to
capture this.
Signed-off-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The numa_slit variable used by node_distance is available to a
module as long as it is linked at compile-time. However, it is
not available to loadable modules. Leading to errors such as:

  ERROR: "numa_slit" [drivers/nvme/host/nvme-core.ko] undefined!

The error above is caused by the nvme multipath code that makes
use of node_distance for its path calculation. When the patch was
added, the lightnvm subsystem would select nvme and always compile
it in, leading to the node_distance call to always succeed.
However, when this requirement was removed, nvme could be compiled
in as a module, which exposed this bug.

This patch extracts node_distance to a function and exports it.
Since ACPI is depending on node_distance being a simple lookup to
numa_slit, the previous behavior is exposed as slit_distance and its
users updated.

Fixes: f3334447 "nvme: take node locality into account when selecting a path"
Fixes: 73569e11 "lightnvm: remove dependencies on BLK_DEV_NVME and PCI"
Signed-off-by: NMatias Bjøring <mb@lightnvm.io>
Signed-off-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge tag 'hwmon-for-v4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

 - fix temp4_type attribute permissions in w83795 driver

 - fix tacho fault detection in mlxreg-fan driver

 - fix current value calculations in ina2xx driver

 - fix initial notification/warning in raspberrypi driver

 - fix a NULL pointer access in ina2xx

* tag 'hwmon-for-v4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (w83795) temp4_type has writable permission
  hwmon: (mlxreg-fan) Fix macros for tacho fault reading
  hwmon: (ina2xx) Fix current value calculation
  hwmon: (raspberrypi) Fix initial notify
  hwmon (ina2xx) Fix NULL id pointer in probe()

Pull dma-mapping fixes from Christoph Hellwig:
 "Two dma-direct / swiotlb regressions fixes:

   - zero is a valid physical address on some arm boards, we can't use
     it as the error value

   - don't try to cache flush the error return value (no matter what it
     is)"

* tag 'dma-mapping-4.20-3' of git://git.infradead.org/users/hch/dma-mapping:
  swiotlb: Skip cache maintenance on map error
  dma-direct: Make DIRECT_MAPPING_ERROR viable for SWIOTLB

Pull NFS client bugfixes from Trond Myklebust:

 - Fix a NFSv4 state manager deadlock when returning a delegation

 - NFSv4.2 copy do not allocate memory under the lock

 - flexfiles: Use the correct stateid for IO in the tightly coupled case

* tag 'nfs-for-4.20-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  flexfiles: use per-mirror specified stateid for IO
  NFSv4.2 copy do not allocate memory under the lock
  NFSv4: Fix a NFSv4 state manager deadlock

I'm taking over the maintainance of Sparse so add myself as
maintainer and move Christopher's info to CREDITS.
Signed-off-by: NLuc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>