- 13 9月, 2019 6 次提交
-
-
由 Jeremy Sowden 提交于
Several header-files, Kconfig files and Makefiles have trailing white-space. Remove it. In netfilter/Kconfig, indent the type of CONFIG_NETFILTER_NETLINK_ACCT correctly. There are semicolons at the end of two function definitions in include/net/netfilter/nf_conntrack_acct.h and include/net/netfilter/nf_conntrack_ecache.h. Remove them. Fix indentation in nf_conntrack_l4proto.h. Signed-off-by: NJeremy Sowden <jeremy@azazel.net> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Jeremy Sowden 提交于
nf_conntrack_labels.h has no include guard. Add it. The comment following the #endif in the nf_flow_table.h include guard referred to the wrong macro. Fix it. Signed-off-by: NJeremy Sowden <jeremy@azazel.net> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 wenxu 提交于
If the net_device unregisters, clean up the offload rules before the chain is destroy. Signed-off-by: Nwenxu <wenxu@ucloud.cn> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 wenxu 提交于
Pass rule, chain and flow_rule object parameters to nft_flow_offload_rule to reuse it. Signed-off-by: Nwenxu <wenxu@ucloud.cn> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 wenxu 提交于
Pass chain and policy parameters to nft_flow_offload_chain to reuse it. Signed-off-by: Nwenxu <wenxu@ucloud.cn> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 wenxu 提交于
Add __nft_offload_get_chain function to get basechain from device. This function requires that caller holds the per-netns nftables mutex. This patch implicitly fixes missing offload flags check and proper mutex from nft_indr_block_cb(). Fixes: 9a32669f ("netfilter: nf_tables_offload: support indr block call") Signed-off-by: Nwenxu <wenxu@ucloud.cn> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
- 11 9月, 2019 2 次提交
-
-
由 Pablo Neira Ayuso 提交于
This patch adds support for packet mirroring and redirection. The nft_fwd_dup_netdev_offload() function configures the flow_action object for the fwd and the dup actions. Extend nft_flow_rule_destroy() to release the net_device object when the flow_rule object is released, since nft_fwd_dup_netdev_offload() bumps the net_device reference counter. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Acked-by: Nwenxu <wenxu@ucloud.cn>
-
Register a new synproxy stateful object type into the stateful object infrastructure. Signed-off-by: NFernando Fernandez Mancera <ffmancera@riseup.net> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
- 09 9月, 2019 3 次提交
-
-
由 Pablo Neira Ayuso 提交于
Add nft_offload_init() and nft_offload_exit() function to deal with the init and the exit path of the offload infrastructure. Rename nft_indr_block_get_and_ing_cmd() to nft_indr_block_cb(). Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Arnd Bergmann 提交于
The nft_offload_ctx structure is much too large to put on the stack: net/netfilter/nf_tables_offload.c:31:23: error: stack frame size of 1200 bytes in function 'nft_flow_rule_create' [-Werror,-Wframe-larger-than=] Use dynamic allocation here, as we do elsewhere in the same function. Fixes: c9626a2c ("netfilter: nf_tables: add hardware offload support") Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Dan Carpenter 提交于
The "newobj" is an error pointer so we can't pass it to kfree(). It doesn't need to be freed so we can remove that and I also renamed the error label. Fixes: d62d0ba9 ("netfilter: nf_tables: Introduce stateful object update operation") Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Acked-by: NFernando Fernandez Mancera <ffmancera@riseup.net> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
- 08 9月, 2019 9 次提交
-
-
由 David S. Miller 提交于
Jakub Kicinski says: ==================== net/tls: small TX offload optimizations This set brings small TLS TX device optimizations. The biggest gain comes from fixing a misuse of non temporal copy instructions. On a synthetic workload modelled after customer's RFC application I see 3-5% percent gain. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
Unlike normal TCP code TLS has to touch the cache lines it copies into to fill header info. On memory-heavy workloads having non temporal stores and normal accesses targeting the same cache line leads to significant overhead. Measured 3% overhead running 3600 round robin connections with additional memory heavy workload. Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: NDirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
For TLS device offload the tag/message authentication code are filled in by the device. The kernel merely reserves space for them. Because device overwrites it, the contents of the tag make do no matter. Current code tries to save space by reusing the header as the tag. This, however, leads to an additional frag being created and defeats buffer coalescing (which trickles all the way down to the drivers). Remove this optimization, and try to allocate the space for the tag in the usual way, leave the memory uninitialized. If memory allocation fails rewind the record pointer so that we use the already copied user data as tag. Note that the optimization was actually buggy, as the tag for TLS 1.2 is 16 bytes, but header is just 13, so the reuse may had looked past the end of the page.. Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: NDirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
All modifications to TLS record list happen under the socket lock. Since records form an ordered queue readers are only concerned about elements being removed, additions can happen concurrently. Use RCU primitives to ensure the correct access types (READ_ONCE/WRITE_ONCE). Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: NDirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
It's generally more cache friendly to walk arrays in order, especially those which are likely not in cache. Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: NDirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2019-09-06 Here's the main bluetooth-next pull request for the 5.4 kernel. - Cleanups & fixes to btrtl driver - Fixes for Realtek devices in btusb, e.g. for suspend handling - Firmware loading support for BCM4345C5 - hidp_send_message() return value handling fixes - Added support for utilizing Fast Advertising Interval - Various other minor cleanups & fixes Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
Don't populate the array spec_opcode on the stack but instead make it static const. Makes the object code smaller by 48 bytes. Before: text data bss dec hex filename 6914 1040 128 8082 1f92 hns3/hns3vf/hclgevf_cmd.o After: text data bss dec hex filename 6866 1040 128 8034 1f62 hns3/hns3vf/hclgevf_cmd.o (gcc version 9.2.1, amd64) Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
Don't populate the arrays on the stack but instead make them static const. Makes the object code smaller by 281 bytes. Before: text data bss dec hex filename 87553 5672 0 93225 16c29 benet/be_cmds.o After: text data bss dec hex filename 87112 5832 0 92944 16b10 benet/be_cmds.o (gcc version 9.2.1, amd64) Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YueHaibing 提交于
Remove including <linux/version.h> that don't need it. Signed-off-by: NYueHaibing <yuehaibing@huawei.com> Acked-by: NShannon Nelson <snelson@pensando.io> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 9月, 2019 18 次提交
-
-
由 David S. Miller 提交于
Jose Abreu says: ==================== net: stmmac: Improvements and fixes for -next Improvements and fixes for recently introduced features. All for -next tree. More info in commit logs. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jose Abreu 提交于
We may have some SoCs that can't achieve XGMAC max speed. Limit it if asked to. Signed-off-by: NJose Abreu <joabreu@synopsys.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jose Abreu 提交于
Add a test to validate that Split Header feature is working correctly. It works by using the rececently introduced counter that increments each time a packet with split header is received. Signed-off-by: NJose Abreu <joabreu@synopsys.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jose Abreu 提交于
We are already doing it by default in the TX path so we can also enable Jumbo Frame support in the RX path independently of MTU value. Signed-off-by: NJose Abreu <joabreu@synopsys.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jose Abreu 提交于
We need to set the RX tail pointer so that RX engine starts working again after finishing the Flow Control test. Signed-off-by: NJose Abreu <joabreu@synopsys.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jose Abreu 提交于
Add checks for support of Source Address Insertion/Replacement before running the test. Signed-off-by: NJose Abreu <joabreu@synopsys.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hangbin Liu 提交于
This is a re-post of previous patch wrote by David Miller[1]. Phil Karn reported[2] that on busy networks with lots of unresolved multicast routing entries, the creation of new multicast group routes can be extremely slow and unreliable. The reason is we hard-coded multicast route entries with unresolved source addresses(cache_resolve_queue_len) to 10. If some multicast route never resolves and the unresolved source addresses increased, there will be no ability to create new multicast route cache. To resolve this issue, we need either add a sysctl entry to make the cache_resolve_queue_len configurable, or just remove cache_resolve_queue_len limit directly, as we already have the socket receive queue limits of mrouted socket, pointed by David. >From my side, I'd perfer to remove the cache_resolve_queue_len limit instead of creating two more(IPv4 and IPv6 version) sysctl entry. [1] https://lkml.org/lkml/2018/7/22/11 [2] https://lkml.org/lkml/2018/7/21/343 v3: instead of remove cache_resolve_queue_len totally, let's only remove the hard code limit when allocate the unresolved cache, as Eric Dumazet suggested, so we don't need to re-count it in other places. v2: hold the mfc_unres_lock while walking the unresolved list in queue_count(), as Nikolay Aleksandrov remind. Reported-by: NPhil Karn <karn@ka9q.net> Signed-off-by: NHangbin Liu <liuhangbin@gmail.com> Reviewed-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Haiyang Zhang says: ==================== hv_netvsc: Enable sg as tunable, sync offload settings to VF NIC This patch set fixes an issue in SG tuning, and sync offload settings from synthetic NIC to VF NIC. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Haiyang Zhang 提交于
VF NIC may go down then come up during host servicing events. This causes the VF NIC offloading feature settings to roll back to the defaults. This patch can synchronize features from synthetic NIC to the VF NIC during ndo_set_features (ethtool -K), and netvsc_register_vf when VF comes back after host events. Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com> Cc: Mark Bloch <markb@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Haiyang Zhang 提交于
In a previous patch, the NETIF_F_SG was missing after the code changes. That caused the SG feature to be "fixed". This patch includes it into hw_features, so it is tunable again. Fixes: 23312a3b ("netvsc: negotiate checksum and segmentation parameters") Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux由 David S. Miller 提交于
Saeed Mahameed says: ==================== mlx5-updates-2019-09-05 1) Allover mlx5 cleanups 2) Added port congestion counters to ethtool stats: Add 3 counters per priority to ethtool using PPCNT: 2.1) rx_prio[p]_buf_discard - the number of packets discarded by device due to lack of per host receive buffers 2.2) rx_prio[p]_cong_discard - the number of packets discarded by device due to per host congestion 2.3) rx_prio[p]_marked - the number of packets ECN marked by device due to per host congestion ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
tcp_diag_get_aux_size() can be called with sockets in any state. icsk_ulp_ops is only present for full sockets. For SYN_RECV or TIME_WAIT ones we would access garbage. Fixes: 61723b39 ("tcp: ulp: add functions to dump ulp-specific information") Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NLuke Hsiao <lukehsiao@google.com> Reported-by: NNeal Cardwell <ncardwell@google.com> Cc: Davide Caratti <dcaratti@redhat.com> Acked-by: NDavide Caratti <dcaratti@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
No need for fib_notifier_ops to be in struct net. It is used only by fib_notifier as a private data. Use net_generic to introduce per-net fib_notifier struct and move fib_notifier_ops there. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 zhong jiang 提交于
The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d but is perhaps more readable. Signed-off-by: Nzhong jiang <zhongjiang@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next由 David S. Miller 提交于
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next: 1) Add nft_reg_store64() and nft_reg_load64() helpers, from Ander Juaristi. 2) Time matching support, also from Ander Juaristi. 3) VLAN support for nfnetlink_log, from Michael Braun. 4) Support for set element deletions from the packet path, also from Ander. 5) Remove __read_mostly from conntrack spinlock, from Li RongQing. 6) Support for updating stateful objects, this also includes the initial client for this infrastructure: the quota extension. A follow up fix for the control plane also comes in this batch. Patches from Fernando Fernandez Mancera. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue由 David S. Miller 提交于
Jeff Kirsher says: ==================== 100GbE Intel Wired LAN Driver Updates 2019-09-05 This series contains updates to ice driver. Brett fixes the setting of num_q_vectors by using the maximum number between the allocated transmit and receive queues. Anirudh simplifies the code to use a helper function to return the main VSI, which is the first element in the pf->vsi array. Adds a pointer check to prevent a NULL pointer dereference. Adds a check to ensure we do not initialize DCB on devices that are not DCB capable. Does some housekeeping on the code to remove unnecessary indirection and reduce the PF structure by removing elements that are not needed since the values they were storing can be readily gotten from ice_get_avail_*_count()'s. Updates the printed strings to make it easier to search the logs for driver capabilities. Jesse cleans up unnecessary function arguments. Updated the code to use prefetch() to add some efficiency to the driver to avoid a cache miss. Did some housekeeping on the code to remove the configurable transmit work limit via ethtool which ended up creating performance overhead. Made additional performance enhancements by updating the driver to start out with a reasonable number of descriptors by changing the default to 2048. Mitch fixes the reset logic for VFs by clearing VF_MBX_ARQLEN register when the source of the reset is not PFR. Lukasz updates the driver to include a similar fix for the i40e driver by reporting link down for VF's when the PF queues are not enabled. Akeem updates the driver to report the VF link status once we get VF resources so that we can reflect the link status similarly to how the PF reports link speed. Ashish updates the transmit context structure based on recent changes to the hardware specification. Dave updates the DCB logic to allow a delayed registration for MIB change events so that the driver is not accepting events before it is ready for them. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Merge tag 'wireless-drivers-next-for-davem-2019-09-07' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 5.4 Second set of patches for 5.4. Lots of changes for iwlwifi and mt76, but also smaller changes to other drivers. Major changes: iwlwifi * remove broken and unused runtime power management mode for PCIe devices, removes IWLWIFI_PCIE_RTPM Kconfig option as well * support new ACPI value for per-platform antenna gain * support for single antenna diversity * support for new WoWLAN FW API brcmfmac * add reset debugfs file for testing firmware restart mt76 * DFS pattern detector for mt7615 (DFS channels not enabled yet) * Channel Switch Announcement (CSA) support for mt7615 * new device support for mt76x0 * support for more ciphers in mt7615 * smart carrier sense on mt7615 * survey support on mt7615 * multiple interfaces on mt76x02u rtw88 * enable MSI interrupt ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kalle Valo 提交于
Merge tag 'iwlwifi-next-for-kalle-2019-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next Patches intended for v5.4 * Remove (broken) d0i3 support; * Debug infrastructure work continues; * Bump support FW API version to 50; * Fix for the SN value in certain suspend/resume situations; * Some work on new FW scan APIs; * Work on LTR FW APIs; * New FW channel-switch support; * Support new ACPI value for per-platform antenna gain; * Support for single antenna diversity; * Support for new WoWLAN FW API; * Initial refactoring of the device selection code; * A bunch of clean-ups; * Other small fixes and improvements;
-
- 06 9月, 2019 2 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next由 David S. Miller 提交于
Daniel Borkmann says: ==================== The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Add the ability to use unaligned chunks in the AF_XDP umem. By relaxing where the chunks can be placed, it allows to use an arbitrary buffer size and place whenever there is a free address in the umem. Helps more seamless DPDK AF_XDP driver integration. Support for i40e, ixgbe and mlx5e, from Kevin and Maxim. 2) Addition of a wakeup flag for AF_XDP tx and fill rings so the application can wake up the kernel for rx/tx processing which avoids busy-spinning of the latter, useful when app and driver is located on the same core. Support for i40e, ixgbe and mlx5e, from Magnus and Maxim. 3) bpftool fixes for printf()-like functions so compiler can actually enforce checks, bpftool build system improvements for custom output directories, and addition of 'bpftool map freeze' command, from Quentin. 4) Support attaching/detaching XDP programs from 'bpftool net' command, from Daniel. 5) Automatic xskmap cleanup when AF_XDP socket is released, and several barrier/{read,write}_once fixes in AF_XDP code, from Björn. 6) Relicense of bpf_helpers.h/bpf_endian.h for future libbpf inclusion as well as libbpf versioning improvements, from Andrii. 7) Several new BPF kselftests for verifier precision tracking, from Alexei. 8) Several BPF kselftest fixes wrt endianess to run on s390x, from Ilya. 9) And more BPF kselftest improvements all over the place, from Stanislav. 10) Add simple BPF map op cache for nfp driver to batch dumps, from Jakub. 11) AF_XDP socket umem mapping improvements for 32bit archs, from Ivan. 12) Add BPF-to-BPF call and BTF line info support for s390x JIT, from Yauheni. 13) Small optimization in arm64 JIT to spare 1 insns for BPF_MOD, from Jerin. 14) Fix an error check in bpf_tcp_gen_syncookie() helper, from Petar. 15) Various minor fixes and cleanups, from Nathan, Masahiro, Masanari, Peter, Wei, Yue. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
The variable rx_process_result is being initialized with a value that is never read and is being re-assigned immediately afterwards. The assignment is redundant, so replace it with the return from function lan743x_rx_process_packet. Addresses-Coverity: ("Unused value") Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-