Pull RTC updates from Alexandre Belloni:
  "Subsystem:
   - non-modular drivers are now explicitly non-modular

  New driver:
    - Epson Toyocom rtc-7301sf/dg

  Drivers:
   - cmos: reject unsupported alarm values wrt the RTC capabilities
   - ds1307: ACPI support
   - jz4740: DT support, jz4780 handling, can now be used as a system
     power controller
   - mcp795: many fixes, in particular proper month handling
   - twl: driver is now DT only"

* tag 'rtc-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (31 commits)
  rtc: mcp795: Fix whitespace and indentation.
  rtc: mcp795: Prefer using the BIT() macro.
  rtc: mcp795: fix month write resetting date to 1.
  rtc: mcp795: fix time range difference between linux and RTC chip.
  rtc: mcp795: fix bitmask value for leap year (LP).
  rtc: mcp795: use bcd2bin/bin2bcd.
  rtc: add support for EPSON TOYOCOM RTC-7301SF/DG
  rtc: ds1307: Add ACPI support
  rtc: imxdi: (trivial) fix a typo
  rtc: ds1374: Merge conditional + WARN_ON()
  rtc: twl: make driver DT only
  rtc: twl: kill static variables
  rtc: fix typos in Kconfig
  rtc: jz4740: make the driver builtin only
  rtc: jz4740: remove unused EXPORT_SYMBOL
  Documentation: bindings: fix twl-rtc documentation
  rtc: Enable compile testing for Maxim and Samsung drivers
  MIPS: jz4740: Remove obsolete code
  MIPS: qi_lb60: Probe RTC driver from DT and use it as power controller
  MIPS: jz4740: DTS: Probe the jz4740-rtc driver from devicetree
  ...

Fix whitespace and indentation errors and the following
checkpatch warnings:
- line 15: Block comments use a trailing */ on a separate line
- line 256: Line over 80 characters
No code change.
Signed-off-by: NEmil Bartczak <emilbart@gmail.com>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

This patch doesn't change the code but replaces all bitmask values
with the BIT(x) macro.
Signed-off-by: NEmil Bartczak <emilbart@gmail.com>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

According to Microchip errata some combinations of date and month
values may result in the date being reset to 1, even if the date
is also written with the month (for example 31-07 or 31-08).
As a workaround avoid writing date and month values within the same
Write command. Instead, terminate the Write command after loading
the date and begin a new command to write the month. In addition,
disable the oscillator before loading the new values. This is done
by ensuring both the ST and EXTOSC bits are cleared and waiting for
the OSCON bit to clear.
Signed-off-by: NEmil Bartczak <emilbart@gmail.com>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

In linux rtc_time struct, tm_mon range is 0~11, while in RTC HW REG,
month range is 1~12. This patch adjusts difference of them.
Signed-off-by: NEmil Bartczak <emilbart@gmail.com>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

According the datasheet the leap year is a fifth bit in month register.
Signed-off-by: NEmil Bartczak <emilbart@gmail.com>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

Change rtc-mcp795.c to use the bcd2bin/bin2bcd functions.
This change fixes the wrong conversion of month value
from binary to BCD (missing right shift operation for 10 month).
Signed-off-by: NEmil Bartczak <emilbart@gmail.com>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

This adds support for EPSON TOYOCOM RTC-7301SF/DG which has parallel
interface compatible with SRAM.

This driver supports basic clock, calendar and alarm functionality.

Tested with Microblaze linux running on Artix7 FPGA board with my own
custom IP for RTC-7301.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

This patch enables ACPI support for rtc-ds1307 driver.
Signed-off-by: NTin Huynh <tnhuynh@apm.com>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

Pull libnvdimm updates from Dan Williams:
 "The libnvdimm pull request is relatively small this time around due to
  some development topics being deferred to 4.11.

  As for this pull request the bulk of it has been in -next for several
  releases leading to one late fix being added (commit 868f036f
  ("libnvdimm: fix mishandled nvdimm_clear_poison() return value")). It
  has received a build success notification from the 0day-kbuild robot
  and passes the latest libnvdimm unit tests.

  Summary:

   - Dynamic label support: To date namespace label support has been
     limited to disambiguating cases where PMEM (direct load/store) and
     BLK (mmio aperture) accessed-capacity alias on the same DIMM. Since
     4.9 added support for multiple namespaces per PMEM-region there is
     value to support namespace labels even in the non-aliasing case.
     The presence of a valid namespace index block force-enables label
     support when the kernel would otherwise rely on region boundaries,
     and permits the region to be sub-divided.

   - Handle media errors in namespace metadata: Complement the error
     handling for media errors in namespace data areas with support for
     clearing errors on writes, and downgrading potential machine-check
     exceptions to simple i/o errors on read.

   - Device-DAX region attributes: Add 'align', 'id', and 'size' as
     attributes for device-dax regions. In particular this enables
     userspace tooling to generically size memory mapping and i/o
     operations. Prevent userspace from growing assumptions /
     dependencies about the parent device topology for a dax region. A
     libnvdimm namespace may not always be the parent device of a dax
     region.

   - Various cleanups and small fixes"

* tag 'libnvdimm-for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  dax: add region 'id', 'size', and 'align' attributes
  libnvdimm: fix mishandled nvdimm_clear_poison() return value
  libnvdimm: replace mutex_is_locked() warnings with lockdep_assert_held
  libnvdimm, pfn: fix align attribute
  libnvdimm, e820: use module_platform_driver
  libnvdimm, namespace: use octal for permissions
  libnvdimm, namespace: avoid multiple sector calculations
  libnvdimm: remove else after return in nsio_rw_bytes()
  libnvdimm, namespace: fix the type of name variable
  libnvdimm: use consistent naming for request_mem_region()
  nvdimm: use the right length of "pmem"
  libnvdimm: check and clear poison before writing to pmem
  tools/testing/nvdimm: dynamic label support
  libnvdimm: allow a platform to force enable label support
  libnvdimm: use generic iostat interfaces

Merge tag 'platform-drivers-x86-v4.10-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86

Pull more x86 platform driver updates from Darren Hart:
 "Move and add registration for the mlx-platform driver. Introduce
  button and lid drivers for the surface3 (different from the
  surface3-pro). Add BXT PMIC TMU support. Add Y700 to existing
  ideapad-laptop quirk.

  Summary:

  ideapad-laptop:
   - Add Y700 15-ACZ to no_hw_rfkill DMI list

  surface3_button:
   - Introduce button support for the Surface 3

  surface3-wmi:
   - Add custom surface3 platform device for controlling LID
   - Balance locking on error path

  mlx-platform:
   - Add mlxcpld-hotplug driver registration
   - Fix semicolon.cocci warnings
   - Move module from arch/x86

  platform/x86:
   - Add Whiskey Cove PMIC TMU support"

* tag 'platform-drivers-x86-v4.10-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
  platform/x86: surface3-wmi: Balance locking on error path
  platform/x86: Add Whiskey Cove PMIC TMU support
  platform/x86: ideapad-laptop: Add Y700 15-ACZ to no_hw_rfkill DMI list
  platform/x86: Introduce button support for the Surface 3
  platform/x86: Add custom surface3 platform device for controlling LID
  platform/x86: mlx-platform: Add mlxcpld-hotplug driver registration
  platform/x86: mlx-platform: Fix semicolon.cocci warnings
  platform/x86: mlx-platform: Move module from arch/x86

There is a possibility that lock will be left acquired.
Consolidate error path under out_free_unlock label.
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Reviewed-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>

This adds TMU (Time Management Unit) support for Intel BXT platform.
It enables the alarm wake-up functionality in the TMU unit of Whiskey Cove
PMIC.
Signed-off-by: NNilesh Bacchewar <nilesh.bacchewar@intel.com>
Reviewed-by: NMika Westerberg <mika.westerberg@linux.intel.com>
[andy: resolve merge conflict in Kconfig]
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>

Pull timer updates from Thomas Gleixner:
 "This is the last functional update from the tip tree for 4.10. It got
  delayed due to a newly reported and anlyzed variant of BIOS bug and
  the resulting wreckage:

   - Seperation of TSC being marked realiable and the fact that the
     platform provides the TSC frequency via CPUID/MSRs and making use
     for it for GOLDMONT.

   - TSC adjust MSR validation and sanitizing:

     The TSC adjust MSR contains the offset to the hardware counter. The
     sum of the adjust MSR and the counter is the TSC value which is
     read via RDTSC.

     On at least two machines from different vendors the BIOS sets the
     TSC adjust MSR to negative values. This happens on cold and warm
     boot. While on cold boot the offset is a few milliseconds, on warm
     boot it basically compensates the power on time of the system. The
     BIOSes are not even using the adjust MSR to set all CPUs in the
     package to the same offset. The offsets are different which renders
     the TSC unusable,

     What's worse is that the TSC deadline timer has a HW feature^Wbug.
     It malfunctions when the TSC adjust value is negative or greater
     equal 0x80000000 resulting in silent boot failures, hard lockups or
     non firing timers. This looks like some hardware internal 32/64bit
     issue with a sign extension problem. Intel has been silent so far
     on the issue.

     The update contains sanity checks and keeps the adjust register
     within working limits and in sync on the package.

     As it looks like this disease is spreading via BIOS crapware, we
     need to address this urgently as the boot failures are hard to
     debug for users"

* 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/tsc: Limit the adjust value further
  x86/tsc: Annotate printouts as firmware bug
  x86/tsc: Force TSC_ADJUST register to value >= zero
  x86/tsc: Validate TSC_ADJUST after resume
  x86/tsc: Validate cpumask pointer before accessing it
  x86/tsc: Fix broken CONFIG_X86_TSC=n build
  x86/tsc: Try to adjust TSC if sync test fails
  x86/tsc: Prepare warp test for TSC adjustment
  x86/tsc: Move sync cleanup to a safe place
  x86/tsc: Sync test only for the first cpu in a package
  x86/tsc: Verify TSC_ADJUST from idle
  x86/tsc: Store and check TSC ADJUST MSR
  x86/tsc: Detect random warps
  x86/tsc: Use X86_FEATURE_TSC_ADJUST in detect_art()
  x86/tsc: Finalize the split of the TSC_RELIABLE flag
  x86/tsc: Set TSC_KNOWN_FREQ and TSC_RELIABLE flags on Intel Atom SoCs
  x86/tsc: Mark Intel ATOM_GOLDMONT TSC reliable
  x86/tsc: Mark TSC frequency determined by CPUID as known
  x86/tsc: Add X86_FEATURE_TSC_KNOWN_FREQ flag

Pull x86 fixes and cleanups from Thomas Gleixner:
 "This set of updates contains:

   - Robustification for the logical package managment. Cures the AMD
     and virtualization issues.

   - Put the correct start_cpu() return address on the stack of the idle
     task.

   - Fixups for the fallout of the nodeid <-> cpuid persistent mapping
     modifciations

   - Move the x86/MPX specific mm_struct member to the arch specific
     mm_context where it belongs

   - Cleanups for C89 struct initializers and useless function
     arguments"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/floppy: Use designated initializers
  x86/mpx: Move bd_addr to mm_context_t
  x86/mm: Drop unused argument 'removed' from sync_global_pgds()
  ACPI/NUMA: Do not map pxm to node when NUMA is turned off
  x86/acpi: Use proper macro for invalid node
  x86/smpboot: Prevent false positive out of bounds cpumask access warning
  x86/boot/64: Push correct start_cpu() return address
  x86/boot/64: Use 'push' instead of 'call' in start_cpu()
  x86/smpboot: Make logical package management more robust

Pull timer fix from Thomas Gleixner:
 "Prevent NULL pointer dereferencing in the tick broadcast code. Old
  bug, which got unearthed by the hotplug ordering problem"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick/broadcast: Prevent NULL pointer dereference

Pull SMP hotplug fixes from Thomas Gleixner:
 "Two fixlets for cpu hotplug:

   - Fix a subtle ordering problem with the dummy timer. This happened
     to work before the conversion by chance due to initcall ordering.

   - Fix the function comment for __cpuhp_setup_state()"

* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  cpu/hotplug: Clarify description of __cpuhp_setup_state() return value
  clocksource/dummy_timer: Move hotplug callback after the real timers

Pull irq fix from Thomas Gleixner:
 "A fix for the irq affinity spread algorithm so it handles non linear
  node numbering nicely"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq/affinity: Fix node generation from cpumask

Adjust value 0x80000000 and other values larger than that render the TSC
deadline timer disfunctional.

We have not yet any information about this from Intel, but experimentation
clearly proves that this is a 32/64 bit and sign extension issue.

If adjust values larger than that are actually required, which might be the
case for physical CPU hotplug, then we need to disable the deadline timer
on the affected package/CPUs and use the local APIC timer instead.

That requires some surgery in the APIC setup code, so we just limit the
ADJUST register value into the known to work range for now and revisit this
when Intel comes forth with proper information.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Roland Scheidegger <rscheidegger_lists@hispeed.ch>
Cc: Bruce Schlobohm <bruce.schlobohm@intel.com>
Cc: Kevin Stanton <kevin.b.stanton@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>

Make it more obvious that the BIOS is screwed up.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Roland Scheidegger <rscheidegger_lists@hispeed.ch>
Cc: Bruce Schlobohm <bruce.schlobohm@intel.com>
Cc: Kevin Stanton <kevin.b.stanton@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>

Prepare to mark sensitive kernel structures for randomization by making
sure they're using designated initializers. These were identified during
allyesconfig builds of x86, arm, and arm64, with most initializer fixes
extracted from grsecurity.
Signed-off-by: NKees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20161217213705.GA1248@beastSigned-off-by: NIngo Molnar <mingo@kernel.org>

Pull networking fixes and cleanups from David Miller:

 1) Revert bogus nla_ok() change, from Alexey Dobriyan.

 2) Various bpf validator fixes from Daniel Borkmann.

 3) Add some necessary SET_NETDEV_DEV() calls to hsis_femac and hip04
    drivers, from Dongpo Li.

 4) Several ethtool ksettings conversions from Philippe Reynes.

 5) Fix bugs in inet port management wrt. soreuseport, from Tom Herbert.

 6) XDP support for virtio_net, from John Fastabend.

 7) Fix NAT handling within a vrf, from David Ahern.

 8) Endianness fixes in dpaa_eth driver, from Claudiu Manoil

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (63 commits)
  net: mv643xx_eth: fix build failure
  isdn: Constify some function parameters
  mlxsw: spectrum: Mark split ports as such
  cgroup: Fix CGROUP_BPF config
  qed: fix old-style function definition
  net: ipv6: check route protocol when deleting routes
  r6040: move spinlock in r6040_close as SOFTIRQ-unsafe lock order detected
  irda: w83977af_ir: cleanup an indent issue
  net: sfc: use new api ethtool_{get|set}_link_ksettings
  net: davicom: dm9000: use new api ethtool_{get|set}_link_ksettings
  net: cirrus: ep93xx: use new api ethtool_{get|set}_link_ksettings
  net: chelsio: cxgb3: use new api ethtool_{get|set}_link_ksettings
  net: chelsio: cxgb2: use new api ethtool_{get|set}_link_ksettings
  bpf: fix mark_reg_unknown_value for spilled regs on map value marking
  bpf: fix overflow in prog accounting
  bpf: dynamically allocate digest scratch buffer
  gtp: Fix initialization of Flags octet in GTPv1 header
  gtp: gtp_check_src_ms_ipv4() always return success
  net/x25: use designated initializers
  isdn: use designated initializers
  ...

Merge uncontroversial parts of branch 'readlink' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs

Pull partial readlink cleanups from Miklos Szeredi.

This is the uncontroversial part of the readlink cleanup patch-set that
simplifies the default readlink handling.

Miklos and Al are still discussing the rest of the series.

* git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  vfs: make generic_readlink() static
  vfs: remove ".readlink = generic_readlink" assignments
  vfs: default to generic_readlink()
  vfs: replace calling i_op->readlink with vfs_readlink()
  proc/self: use generic_readlink
  ecryptfs: use vfs_get_link()
  bad_inode: add missing i_op initializers

The build of sparc allmodconfig fails with the error:
"of_irq_to_resource" [drivers/net/ethernet/marvell/mv643xx_eth.ko]
	undefined!

of_irq_to_resource() is defined when CONFIG_OF_IRQ is defined. And also
CONFIG_OF_IRQ can only be defined if CONFIG_IRQ is defined. So we can
safely use #if defined(CONFIG_OF_IRQ) in the code.
Signed-off-by: NSudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The coming initify gcc plugin expects const pointer types, and caught
some __printf arguments that weren't const yet. This fixes those.
Signed-off-by: NEmese Revfy <re.emese@gmail.com>
[kees: expanded commit message]
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a port is split we should mark it as such, as otherwise the split
ports aren't renamed correctly (e.g. sw1p3 -> sw1p3s1) and the unsplit
operation fails:

$ devlink port split sw1p3 count 4
$ devlink port unsplit eth0
devlink answers: Invalid argument
[  598.565307] mlxsw_spectrum 0000:03:00.0 eth0: Port wasn't split

Fixes: 67963a33 ("mlxsw: Make devlink port instances independent of spectrum/switchx2 port instances")
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Reported-by: NTamir Winetroub <tamirw@mellanox.com>
Reviewed-by: NElad Raz <eladr@mellanox.com>
Tested-by: NTamir Winetroub <tamirw@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull more vfs updates from Al Viro:
 "In this pile:

   - autofs-namespace series
   - dedupe stuff
   - more struct path constification"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (40 commits)
  ocfs2: implement the VFS clone_range, copy_range, and dedupe_range features
  ocfs2: charge quota for reflinked blocks
  ocfs2: fix bad pointer cast
  ocfs2: always unlock when completing dio writes
  ocfs2: don't eat io errors during _dio_end_io_write
  ocfs2: budget for extent tree splits when adding refcount flag
  ocfs2: prohibit refcounted swapfiles
  ocfs2: add newlines to some error messages
  ocfs2: convert inode refcount test to a helper
  simple_write_end(): don't zero in short copy into uptodate
  exofs: don't mess with simple_write_{begin,end}
  9p: saner ->write_end() on failing copy into non-uptodate page
  fix gfs2_stuffed_write_end() on short copies
  fix ceph_write_end()
  nfs_write_end(): fix handling of short copies
  vfs: refactor clone/dedupe_file_range common functions
  fs: try to clone files first in vfs_copy_file_range
  vfs: misc struct path constification
  namespace.c: constify struct path passed to a bunch of primitives
  quota: constify struct path in quota_on
  ...

CGROUP_BPF depended on SOCK_CGROUP_DATA which can't be manually
enabled, making it rather challenging to turn CGROUP_BPF on.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'mac80211-for-davem-2016-12-16' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
Three fixes:
 * avoid a WARN_ON() when trying to use WEP with AP_VLANs
 * ensure enough headroom on mesh forwarding packets
 * don't report unknown/invalid rates to userspace
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The newly added file causes a harmless warning, with "make W=1":

drivers/net/ethernet/qlogic/qed/qed_iscsi.c: In function 'qed_get_iscsi_ops':
drivers/net/ethernet/qlogic/qed/qed_iscsi.c:1268:29: warning: old-style function definition [-Wold-style-definition]

This makes it a proper prototype.

Fixes: fc831825 ("qed: Add support for hardware offloaded iSCSI.")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The protocol field is checked when deleting IPv4 routes, but ignored for
IPv6, which causes problems with routing daemons accidentally deleting
externally set routes (observed by multiple bird6 users).

This can be verified using `ip -6 route del <prefix> proto something`.
Signed-off-by: NMantas Mikulėnas <grawity@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

'ifconfig eth0 down' makes r6040_close() trigger:
 INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected

Fixed by moving calls to phy_stop(), napi_disable(), netif_stop_queue()
to outside of the module's private spin_lock_irq block.

Found on a Versalogic Tomcat SBC with a Vortex86 SoC

s1660e_5150:~# sudo ifconfig eth0 down
[   61.306415] ======================================================
[   61.306415] [ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ]
[   61.306415] 4.9.0-gb898d2d-manuel #1 Not tainted
[   61.306415] ------------------------------------------------------
[   61.306415] ifconfig/449 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
[   61.306415]  (&dev->lock){+.+...}, at: [<c1336276>] phy_stop+0x16/0x80

[   61.306415] and this task is already holding:
[   61.306415]  (&(&lp->lock)->rlock){+.-...}, at: [<d0934c84>] r6040_close+0x24/0x230 [r6040]
which would create a new lock dependency:
[   61.306415]  (&(&lp->lock)->rlock){+.-...} -> (&dev->lock){+.+...}

[   61.306415] but this new dependency connects a SOFTIRQ-irq-safe lock:
[   61.306415]  (&(&lp->lock)->rlock){+.-...}
[   61.306415] ... which became SOFTIRQ-irq-safe at:
[   61.306415]   [   61.306415] [<c1075bc5>] __lock_acquire+0x555/0x1770
[   61.306415]   [   61.306415] [<c107717c>] lock_acquire+0x7c/0x150
[   61.306415]   [   61.306415] [<c14bb334>] _raw_spin_lock_irqsave+0x24/0x40
[   61.306415]   [   61.306415] [<d0934ac0>] r6040_start_xmit+0x30/0x1d0 [r6040]
[   61.306415]   [   61.306415] [<c13a7d4d>] dev_hard_start_xmit+0x9d/0x2d0
[   61.306415]   [   61.306415] [<c13c8a38>] sch_direct_xmit+0xa8/0x140
[   61.306415]   [   61.306415] [<c13a8436>] __dev_queue_xmit+0x416/0x780
[   61.306415]   [   61.306415] [<c13a87aa>] dev_queue_xmit+0xa/0x10
[   61.306415]   [   61.306415] [<c13b4837>] neigh_resolve_output+0x147/0x220
[   61.306415]   [   61.306415] [<c144541b>] ip6_finish_output2+0x2fb/0x910
[   61.306415]   [   61.306415] [<c14494e6>] ip6_finish_output+0xa6/0x1a0
[   61.306415]   [   61.306415] [<c1449635>] ip6_output+0x55/0x320
[   61.306415]   [   61.306415] [<c146f4d2>] mld_sendpack+0x352/0x560
[   61.306415]   [   61.306415] [<c146fe55>] mld_ifc_timer_expire+0x155/0x280
[   61.306415]   [   61.306415] [<c108b081>] call_timer_fn+0x81/0x270
[   61.306415]   [   61.306415] [<c108b331>] expire_timers+0xc1/0x180
[   61.306415]   [   61.306415] [<c108b4f7>] run_timer_softirq+0x77/0x150
[   61.306415]   [   61.306415] [<c1043d04>] __do_softirq+0xb4/0x3d0
[   61.306415]   [   61.306415] [<c101a15c>] do_softirq_own_stack+0x1c/0x30
[   61.306415]   [   61.306415] [<c104416e>] irq_exit+0x8e/0xa0
[   61.306415]   [   61.306415] [<c1019d31>] do_IRQ+0x51/0x100
[   61.306415]   [   61.306415] [<c14bc176>] common_interrupt+0x36/0x40
[   61.306415]   [   61.306415] [<c1134928>] set_root+0x68/0xf0
[   61.306415]   [   61.306415] [<c1136120>] path_init+0x400/0x640
[   61.306415]   [   61.306415] [<c11386bf>] path_lookupat+0xf/0xe0
[   61.306415]   [   61.306415] [<c1139ebc>] filename_lookup+0x6c/0x100
[   61.306415]   [   61.306415] [<c1139fd5>] user_path_at_empty+0x25/0x30
[   61.306415]   [   61.306415] [<c11298c6>] SyS_faccessat+0x86/0x1e0
[   61.306415]   [   61.306415] [<c1129a30>] SyS_access+0x10/0x20
[   61.306415]   [   61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110
[   61.306415]   [   61.306415] [<c14bba3f>] restore_all+0x0/0x61
[   61.306415]
[   61.306415] to a SOFTIRQ-irq-unsafe lock:
[   61.306415]  (&dev->lock){+.+...}
[   61.306415] ... which became SOFTIRQ-irq-unsafe at:
[   61.306415] ...[   61.306415]
[   61.306415] [<c1075c0c>] __lock_acquire+0x59c/0x1770
[   61.306415]   [   61.306415] [<c107717c>] lock_acquire+0x7c/0x150
[   61.306415]   [   61.306415] [<c14b7add>] mutex_lock_nested+0x2d/0x4a0
[   61.306415]   [   61.306415] [<c133747d>] phy_probe+0x4d/0xc0
[   61.306415]   [   61.306415] [<c1338afe>] phy_attach_direct+0xbe/0x190
[   61.306415]   [   61.306415] [<c1338ca7>] phy_connect_direct+0x17/0x60
[   61.306415]   [   61.306415] [<c1338d23>] phy_connect+0x33/0x70
[   61.306415]   [   61.306415] [<d09357a0>] r6040_init_one+0x3a0/0x500 [r6040]
[   61.306415]   [   61.306415] [<c12a78c7>] pci_device_probe+0x77/0xd0
[   61.306415]   [   61.306415] [<c12f5e15>] driver_probe_device+0x145/0x280
[   61.306415]   [   61.306415] [<c12f5fd9>] __driver_attach+0x89/0x90
[   61.306415]   [   61.306415] [<c12f43ef>] bus_for_each_dev+0x4f/0x80
[   61.306415]   [   61.306415] [<c12f5954>] driver_attach+0x14/0x20
[   61.306415]   [   61.306415] [<c12f55b7>] bus_add_driver+0x197/0x210
[   61.306415]   [   61.306415] [<c12f6a21>] driver_register+0x51/0xd0
[   61.306415]   [   61.306415] [<c12a6955>] __pci_register_driver+0x45/0x50
[   61.306415]   [   61.306415] [<d0938017>] 0xd0938017
[   61.306415]   [   61.306415] [<c100043f>] do_one_initcall+0x2f/0x140
[   61.306415]   [   61.306415] [<c10e48c0>] do_init_module+0x4a/0x19b
[   61.306415]   [   61.306415] [<c10a680e>] load_module+0x1b2e/0x2070
[   61.306415]   [   61.306415] [<c10a6eb9>] SyS_finit_module+0x69/0x80
[   61.306415]   [   61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110
[   61.306415]   [   61.306415] [<c14bba3f>] restore_all+0x0/0x61
[   61.306415]
[   61.306415] other info that might help us debug this:
[   61.306415]
[   61.306415]  Possible interrupt unsafe locking scenario:
[   61.306415]
[   61.306415]        CPU0                    CPU1
[   61.306415]        ----                    ----
[   61.306415]   lock(&dev->lock);
[   61.306415]                                local_irq_disable();
[   61.306415]                                lock(&(&lp->lock)->rlock);
[   61.306415]                                lock(&dev->lock);
[   61.306415]   <Interrupt>
[   61.306415]     lock(&(&lp->lock)->rlock);
[   61.306415]
[   61.306415]  *** DEADLOCK ***
[   61.306415]
[   61.306415] 2 locks held by ifconfig/449:
[   61.306415]  #0:  (rtnl_mutex){+.+.+.}, at: [<c13b68ef>] rtnl_lock+0xf/0x20
[   61.306415]  #1:  (&(&lp->lock)->rlock){+.-...}, at: [<d0934c84>] r6040_close+0x24/0x230 [r6040]
[   61.306415]
[   61.306415] the dependencies between SOFTIRQ-irq-safe lock and the holding lock:
[   61.306415] -> (&(&lp->lock)->rlock){+.-...} ops: 3049 {
[   61.306415]    HARDIRQ-ON-W at:
[   61.306415]                     [   61.306415] [<c1075be7>] __lock_acquire+0x577/0x1770
[   61.306415]                     [   61.306415] [<c107717c>] lock_acquire+0x7c/0x150
[   61.306415]                     [   61.306415] [<c14bb21b>] _raw_spin_lock+0x1b/0x30
[   61.306415]                     [   61.306415] [<d09343cc>] r6040_poll+0x2c/0x330 [r6040]
[   61.306415]                     [   61.306415] [<c13a5577>] net_rx_action+0x197/0x340
[   61.306415]                     [   61.306415] [<c1043d04>] __do_softirq+0xb4/0x3d0
[   61.306415]                     [   61.306415] [<c1044037>] run_ksoftirqd+0x17/0x40
[   61.306415]                     [   61.306415] [<c105fe91>] smpboot_thread_fn+0x141/0x180
[   61.306415]                     [   61.306415] [<c105c84e>] kthread+0xde/0x110
[   61.306415]                     [   61.306415] [<c14bb949>] ret_from_fork+0x19/0x30
[   61.306415]    IN-SOFTIRQ-W at:
[   61.306415]                     [   61.306415] [<c1075bc5>] __lock_acquire+0x555/0x1770
[   61.306415]                     [   61.306415] [<c107717c>] lock_acquire+0x7c/0x150
[   61.306415]                     [   61.306415] [<c14bb334>] _raw_spin_lock_irqsave+0x24/0x40
[   61.306415]                     [   61.306415] [<d0934ac0>] r6040_start_xmit+0x30/0x1d0 [r6040]
[   61.306415]                     [   61.306415] [<c13a7d4d>] dev_hard_start_xmit+0x9d/0x2d0
[   61.306415]                     [   61.306415] [<c13c8a38>] sch_direct_xmit+0xa8/0x140
[   61.306415]                     [   61.306415] [<c13a8436>] __dev_queue_xmit+0x416/0x780
[   61.306415]                     [   61.306415] [<c13a87aa>] dev_queue_xmit+0xa/0x10
[   61.306415]                     [   61.306415] [<c13b4837>] neigh_resolve_output+0x147/0x220
[   61.306415]                     [   61.306415] [<c144541b>] ip6_finish_output2+0x2fb/0x910
[   61.306415]                     [   61.306415] [<c14494e6>] ip6_finish_output+0xa6/0x1a0
[   61.306415]                     [   61.306415] [<c1449635>] ip6_output+0x55/0x320
[   61.306415]                     [   61.306415] [<c146f4d2>] mld_sendpack+0x352/0x560
[   61.306415]                     [   61.306415] [<c146fe55>] mld_ifc_timer_expire+0x155/0x280
[   61.306415]                     [   61.306415] [<c108b081>] call_timer_fn+0x81/0x270
[   61.306415]                     [   61.306415] [<c108b331>] expire_timers+0xc1/0x180
[   61.306415]                     [   61.306415] [<c108b4f7>] run_timer_softirq+0x77/0x150
[   61.306415]                     [   61.306415] [<c1043d04>] __do_softirq+0xb4/0x3d0
[   61.306415]                     [   61.306415] [<c101a15c>] do_softirq_own_stack+0x1c/0x30
[   61.306415]                     [   61.306415] [<c104416e>] irq_exit+0x8e/0xa0
[   61.306415]                     [   61.306415] [<c1019d31>] do_IRQ+0x51/0x100
[   61.306415]                     [   61.306415] [<c14bc176>] common_interrupt+0x36/0x40
[   61.306415]                     [   61.306415] [<c1134928>] set_root+0x68/0xf0
[   61.306415]                     [   61.306415] [<c1136120>] path_init+0x400/0x640
[   61.306415]                     [   61.306415] [<c11386bf>] path_lookupat+0xf/0xe0
[   61.306415]                     [   61.306415] [<c1139ebc>] filename_lookup+0x6c/0x100
[   61.306415]                     [   61.306415] [<c1139fd5>] user_path_at_empty+0x25/0x30
[   61.306415]                     [   61.306415] [<c11298c6>] SyS_faccessat+0x86/0x1e0
[   61.306415]                     [   61.306415] [<c1129a30>] SyS_access+0x10/0x20
[   61.306415]                     [   61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110
[   61.306415]                     [   61.306415] [<c14bba3f>] restore_all+0x0/0x61
[   61.306415]    INITIAL USE at:
[   61.306415]                    [   61.306415] [<c107586e>] __lock_acquire+0x1fe/0x1770
[   61.306415]                    [   61.306415] [<c107717c>] lock_acquire+0x7c/0x150
[   61.306415]                    [   61.306415] [<c14bb334>] _raw_spin_lock_irqsave+0x24/0x40
[   61.306415]                    [   61.306415] [<d093474e>] r6040_get_stats+0x1e/0x60 [r6040]
[   61.306415]                    [   61.306415] [<c139fb16>] dev_get_stats+0x96/0xc0
[   61.306415]                    [   61.306415] [<c14b416e>] rtnl_fill_stats+0x36/0xfd
[   61.306415]                    [   61.306415] [<c13b7b3c>] rtnl_fill_ifinfo+0x47c/0xce0
[   61.306415]                    [   61.306415] [<c13bc08e>] rtmsg_ifinfo_build_skb+0x4e/0xd0
[   61.306415]                    [   61.306415] [<c13bc120>] rtmsg_ifinfo.part.20+0x10/0x40
[   61.306415]                    [   61.306415] [<c13bc16b>] rtmsg_ifinfo+0x1b/0x20
[   61.306415]                    [   61.306415] [<c13a9d19>] register_netdevice+0x409/0x550
[   61.306415]                    [   61.306415] [<c13a9e72>] register_netdev+0x12/0x20
[   61.306415]                    [   61.306415] [<d09357e8>] r6040_init_one+0x3e8/0x500 [r6040]
[   61.306415]                    [   61.306415] [<c12a78c7>] pci_device_probe+0x77/0xd0
[   61.306415]                    [   61.306415] [<c12f5e15>] driver_probe_device+0x145/0x280
[   61.306415]                    [   61.306415] [<c12f5fd9>] __driver_attach+0x89/0x90
[   61.306415]                    [   61.306415] [<c12f43ef>] bus_for_each_dev+0x4f/0x80
[   61.306415]                    [   61.306415] [<c12f5954>] driver_attach+0x14/0x20
[   61.306415]                    [   61.306415] [<c12f55b7>] bus_add_driver+0x197/0x210
[   61.306415]                    [   61.306415] [<c12f6a21>] driver_register+0x51/0xd0
[   61.306415]                    [   61.306415] [<c12a6955>] __pci_register_driver+0x45/0x50
[   61.306415]                    [   61.306415] [<d0938017>] 0xd0938017
[   61.306415]                    [   61.306415] [<c100043f>] do_one_initcall+0x2f/0x140
[   61.306415]                    [   61.306415] [<c10e48c0>] do_init_module+0x4a/0x19b
[   61.306415]                    [   61.306415] [<c10a680e>] load_module+0x1b2e/0x2070
[   61.306415]                    [   61.306415] [<c10a6eb9>] SyS_finit_module+0x69/0x80
[   61.306415]                    [   61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110
[   61.306415]                    [   61.306415] [<c14bba3f>] restore_all+0x0/0x61
[   61.306415]  }
[   61.306415]  ... key      at: [<d0936280>] __key.45893+0x0/0xfffff739 [r6040]
[   61.306415]  ... acquired at:
[   61.306415]    [   61.306415] [<c1074a32>] check_irq_usage+0x42/0xb0
[   61.306415]    [   61.306415] [<c107677c>] __lock_acquire+0x110c/0x1770
[   61.306415]    [   61.306415] [<c107717c>] lock_acquire+0x7c/0x150
[   61.306415]    [   61.306415] [<c14b7add>] mutex_lock_nested+0x2d/0x4a0
[   61.306415]    [   61.306415] [<c1336276>] phy_stop+0x16/0x80
[   61.306415]    [   61.306415] [<d0934ce9>] r6040_close+0x89/0x230 [r6040]
[   61.306415]    [   61.306415] [<c13a0a91>] __dev_close_many+0x61/0xa0
[   61.306415]    [   61.306415] [<c13a0bbf>] __dev_close+0x1f/0x30
[   61.306415]    [   61.306415] [<c13a9127>] __dev_change_flags+0x87/0x150
[   61.306415]    [   61.306415] [<c13a9213>] dev_change_flags+0x23/0x60
[   61.306415]    [   61.306415] [<c1416238>] devinet_ioctl+0x5f8/0x6f0
[   61.306415]    [   61.306415] [<c1417f75>] inet_ioctl+0x65/0x90
[   61.306415]    [   61.306415] [<c1389b54>] sock_ioctl+0x124/0x2b0
[   61.306415]    [   61.306415] [<c113cf7c>] do_vfs_ioctl+0x7c/0x790
[   61.306415]    [   61.306415] [<c113d6b8>] SyS_ioctl+0x28/0x50
[   61.306415]    [   61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110
[   61.306415]    [   61.306415] [<c14bba3f>] restore_all+0x0/0x61
[   61.306415]
[   61.306415]
the dependencies between the lock to be acquired[   61.306415]  and SOFTIRQ-irq-unsafe lock:
[   61.306415] -> (&dev->lock){+.+...} ops: 56 {
[   61.306415]    HARDIRQ-ON-W at:
[   61.306415]                     [   61.306415] [<c1075be7>] __lock_acquire+0x577/0x1770
[   61.306415]                     [   61.306415] [<c107717c>] lock_acquire+0x7c/0x150
[   61.306415]                     [   61.306415] [<c14b7add>] mutex_lock_nested+0x2d/0x4a0
[   61.306415]                     [   61.306415] [<c133747d>] phy_probe+0x4d/0xc0
[   61.306415]                     [   61.306415] [<c1338afe>] phy_attach_direct+0xbe/0x190
[   61.306415]                     [   61.306415] [<c1338ca7>] phy_connect_direct+0x17/0x60
[   61.306415]                     [   61.306415] [<c1338d23>] phy_connect+0x33/0x70
[   61.306415]                     [   61.306415] [<d09357a0>] r6040_init_one+0x3a0/0x500 [r6040]
[   61.306415]                     [   61.306415] [<c12a78c7>] pci_device_probe+0x77/0xd0
[   61.306415]                     [   61.306415] [<c12f5e15>] driver_probe_device+0x145/0x280
[   61.306415]                     [   61.306415] [<c12f5fd9>] __driver_attach+0x89/0x90
[   61.306415]                     [   61.306415] [<c12f43ef>] bus_for_each_dev+0x4f/0x80
[   61.306415]                     [   61.306415] [<c12f5954>] driver_attach+0x14/0x20
[   61.306415]                     [   61.306415] [<c12f55b7>] bus_add_driver+0x197/0x210
[   61.306415]                     [   61.306415] [<c12f6a21>] driver_register+0x51/0xd0
[   61.306415]                     [   61.306415] [<c12a6955>] __pci_register_driver+0x45/0x50
[   61.306415]                     [   61.306415] [<d0938017>] 0xd0938017
[   61.306415]                     [   61.306415] [<c100043f>] do_one_initcall+0x2f/0x140
[   61.306415]                     [   61.306415] [<c10e48c0>] do_init_module+0x4a/0x19b
[   61.306415]                     [   61.306415] [<c10a680e>] load_module+0x1b2e/0x2070
[   61.306415]                     [   61.306415] [<c10a6eb9>] SyS_finit_module+0x69/0x80
[   61.306415]                     [   61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110
[   61.306415]                     [   61.306415] [<c14bba3f>] restore_all+0x0/0x61
[   61.306415]    SOFTIRQ-ON-W at:
[   61.306415]                     [   61.306415] [<c1075c0c>] __lock_acquire+0x59c/0x1770
[   61.306415]                     [   61.306415] [<c107717c>] lock_acquire+0x7c/0x150
[   61.306415]                     [   61.306415] [<c14b7add>] mutex_lock_nested+0x2d/0x4a0
[   61.306415]                     [   61.306415] [<c133747d>] phy_probe+0x4d/0xc0
[   61.306415]                     [   61.306415] [<c1338afe>] phy_attach_direct+0xbe/0x190
[   61.306415]                     [   61.306415] [<c1338ca7>] phy_connect_direct+0x17/0x60
[   61.306415]                     [   61.306415] [<c1338d23>] phy_connect+0x33/0x70
[   61.306415]                     [   61.306415] [<d09357a0>] r6040_init_one+0x3a0/0x500 [r6040]
[   61.306415]                     [   61.306415] [<c12a78c7>] pci_device_probe+0x77/0xd0
[   61.306415]                     [   61.306415] [<c12f5e15>] driver_probe_device+0x145/0x280
[   61.306415]                     [   61.306415] [<c12f5fd9>] __driver_attach+0x89/0x90
[   61.306415]                     [   61.306415] [<c12f43ef>] bus_for_each_dev+0x4f/0x80
[   61.306415]                     [   61.306415] [<c12f5954>] driver_attach+0x14/0x20
[   61.306415]                     [   61.306415] [<c12f55b7>] bus_add_driver+0x197/0x210
[   61.306415]                     [   61.306415] [<c12f6a21>] driver_register+0x51/0xd0
[   61.306415]                     [   61.306415] [<c12a6955>] __pci_register_driver+0x45/0x50
[   61.306415]                     [   61.306415] [<d0938017>] 0xd0938017
[   61.306415]                     [   61.306415] [<c100043f>] do_one_initcall+0x2f/0x140
[   61.306415]                     [   61.306415] [<c10e48c0>] do_init_module+0x4a/0x19b
[   61.306415]                     [   61.306415] [<c10a680e>] load_module+0x1b2e/0x2070
[   61.306415]                     [   61.306415] [<c10a6eb9>] SyS_finit_module+0x69/0x80
[   61.306415]                     [   61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110
[   61.306415]                     [   61.306415] [<c14bba3f>] restore_all+0x0/0x61
[   61.306415]    INITIAL USE at:
[   61.306415]                    [   61.306415] [<c107586e>] __lock_acquire+0x1fe/0x1770
[   61.306415]                    [   61.306415] [<c107717c>] lock_acquire+0x7c/0x150
[   61.306415]                    [   61.306415] [<c14b7add>] mutex_lock_nested+0x2d/0x4a0
[   61.306415]                    [   61.306415] [<c133747d>] phy_probe+0x4d/0xc0
[   61.306415]                    [   61.306415] [<c1338afe>] phy_attach_direct+0xbe/0x190
[   61.306415]                    [   61.306415] [<c1338ca7>] phy_connect_direct+0x17/0x60
[   61.306415]                    [   61.306415] [<c1338d23>] phy_connect+0x33/0x70
[   61.306415]                    [   61.306415] [<d09357a0>] r6040_init_one+0x3a0/0x500 [r6040]
[   61.306415]                    [   61.306415] [<c12a78c7>] pci_device_probe+0x77/0xd0
[   61.306415]                    [   61.306415] [<c12f5e15>] driver_probe_device+0x145/0x280
[   61.306415]                    [   61.306415] [<c12f5fd9>] __driver_attach+0x89/0x90
[   61.306415]                    [   61.306415] [<c12f43ef>] bus_for_each_dev+0x4f/0x80
[   61.306415]                    [   61.306415] [<c12f5954>] driver_attach+0x14/0x20
[   61.306415]                    [   61.306415] [<c12f55b7>] bus_add_driver+0x197/0x210
[   61.306415]                    [   61.306415] [<c12f6a21>] driver_register+0x51/0xd0
[   61.306415]                    [   61.306415] [<c12a6955>] __pci_register_driver+0x45/0x50
[   61.306415]                    [   61.306415] [<d0938017>] 0xd0938017
[   61.306415]                    [   61.306415] [<c100043f>] do_one_initcall+0x2f/0x140
[   61.306415]                    [   61.306415] [<c10e48c0>] do_init_module+0x4a/0x19b
[   61.306415]                    [   61.306415] [<c10a680e>] load_module+0x1b2e/0x2070
[   61.306415]                    [   61.306415] [<c10a6eb9>] SyS_finit_module+0x69/0x80
[   61.306415]                    [   61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110
[   61.306415]                    [   61.306415] [<c14bba3f>] restore_all+0x0/0x61
[   61.306415]  }
[   61.306415]  ... key      at: [<c1f28f39>] __key.43998+0x0/0x8
[   61.306415]  ... acquired at:
[   61.306415]    [   61.306415] [<c1074a32>] check_irq_usage+0x42/0xb0
[   61.306415]    [   61.306415] [<c107677c>] __lock_acquire+0x110c/0x1770
[   61.306415]    [   61.306415] [<c107717c>] lock_acquire+0x7c/0x150
[   61.306415]    [   61.306415] [<c14b7add>] mutex_lock_nested+0x2d/0x4a0
[   61.306415]    [   61.306415] [<c1336276>] phy_stop+0x16/0x80
[   61.306415]    [   61.306415] [<d0934ce9>] r6040_close+0x89/0x230 [r6040]
[   61.306415]    [   61.306415] [<c13a0a91>] __dev_close_many+0x61/0xa0
[   61.306415]    [   61.306415] [<c13a0bbf>] __dev_close+0x1f/0x30
[   61.306415]    [   61.306415] [<c13a9127>] __dev_change_flags+0x87/0x150
[   61.306415]    [   61.306415] [<c13a9213>] dev_change_flags+0x23/0x60
[   61.306415]    [   61.306415] [<c1416238>] devinet_ioctl+0x5f8/0x6f0
[   61.306415]    [   61.306415] [<c1417f75>] inet_ioctl+0x65/0x90
[   61.306415]    [   61.306415] [<c1389b54>] sock_ioctl+0x124/0x2b0
[   61.306415]    [   61.306415] [<c113cf7c>] do_vfs_ioctl+0x7c/0x790
[   61.306415]    [   61.306415] [<c113d6b8>] SyS_ioctl+0x28/0x50
[   61.306415]    [   61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110
[   61.306415]    [   61.306415] [<c14bba3f>] restore_all+0x0/0x61
[   61.306415]
[   61.306415]
[   61.306415] stack backtrace:
[   61.306415] CPU: 0 PID: 449 Comm: ifconfig Not tainted 4.9.0-gb898d2d-manuel #1
[   61.306415] Call Trace:
[   61.306415]  dump_stack+0x16/0x19
[   61.306415]  check_usage+0x3f6/0x550
[   61.306415]  ? check_usage+0x4d/0x550
[   61.306415]  check_irq_usage+0x42/0xb0
[   61.306415]  __lock_acquire+0x110c/0x1770
[   61.306415]  lock_acquire+0x7c/0x150
[   61.306415]  ? phy_stop+0x16/0x80
[   61.306415]  mutex_lock_nested+0x2d/0x4a0
[   61.306415]  ? phy_stop+0x16/0x80
[   61.306415]  ? r6040_close+0x24/0x230 [r6040]
[   61.306415]  ? __delay+0x9/0x10
[   61.306415]  phy_stop+0x16/0x80
[   61.306415]  r6040_close+0x89/0x230 [r6040]
[   61.306415]  __dev_close_many+0x61/0xa0
[   61.306415]  __dev_close+0x1f/0x30
[   61.306415]  __dev_change_flags+0x87/0x150
[   61.306415]  dev_change_flags+0x23/0x60
[   61.306415]  devinet_ioctl+0x5f8/0x6f0
[   61.306415]  inet_ioctl+0x65/0x90
[   61.306415]  sock_ioctl+0x124/0x2b0
[   61.306415]  ? dlci_ioctl_set+0x30/0x30
[   61.306415]  do_vfs_ioctl+0x7c/0x790
[   61.306415]  ? trace_hardirqs_on+0xb/0x10
[   61.306415]  ? call_rcu_sched+0xd/0x10
[   61.306415]  ? __put_cred+0x32/0x50
[   61.306415]  ? SyS_faccessat+0x178/0x1e0
[   61.306415]  SyS_ioctl+0x28/0x50
[   61.306415]  do_int80_syscall_32+0x3f/0x110
[   61.306415]  entry_INT80_32+0x2f/0x2f
[   61.306415] EIP: 0xb764d364
[   61.306415] EFLAGS: 00000286 CPU: 0
[   61.306415] EAX: ffffffda EBX: 00000004 ECX: 00008914 EDX: bfa99d7c
[   61.306415] ESI: bfa99e4c EDI: fffffffe EBP: 00000004 ESP: bfa99d58
[   61.306415]  DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b
[   63.836607] r6040 0000:00:08.0 eth0: Link is Down
Signed-off-by: NManuel Bessler <manuel.bessler@sensus.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In commit 99d8d215 ("irda: w83977af_ir: Neaten logging"), we
accidentally added an extra tab to these lines.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com>
Tested-by: NBert Kenward <bkenward@solarflare.com>
Acked-by: NBert Kenward <bkenward@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
Couple of BPF fixes

This set contains three BPF fixes for net, one that addresses the
complaint from Geert wrt static allocations, and the other is a fix
wrt mem accounting that I found recently during testing and there's
still one more fix on the map value marking.

Thanks!

v1 -> v2:
  - Patch 1 as is.
  - Fixed kbuild bot issue by letting charging helpers stay in the
    syscall.c, since there locked_vm is valid and only export the
    ones needed by bpf_prog_realloc(). Add empty stubs in case the
    bpf syscall is not enabled.
  - Added patch 3 that addresses one more issue in map val marking.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Martin reported a verifier issue that hit the BUG_ON() for his
test case in the mark_reg_unknown_value() function:

  [  202.861380] kernel BUG at kernel/bpf/verifier.c:467!
  [...]
  [  203.291109] Call Trace:
  [  203.296501]  [<ffffffff811364d5>] mark_map_reg+0x45/0x50
  [  203.308225]  [<ffffffff81136558>] mark_map_regs+0x78/0x90
  [  203.320140]  [<ffffffff8113938d>] do_check+0x226d/0x2c90
  [  203.331865]  [<ffffffff8113a6ab>] bpf_check+0x48b/0x780
  [  203.343403]  [<ffffffff81134c8e>] bpf_prog_load+0x27e/0x440
  [  203.355705]  [<ffffffff8118a38f>] ? handle_mm_fault+0x11af/0x1230
  [  203.369158]  [<ffffffff812d8188>] ? security_capable+0x48/0x60
  [  203.382035]  [<ffffffff811351a4>] SyS_bpf+0x124/0x960
  [  203.393185]  [<ffffffff810515f6>] ? __do_page_fault+0x276/0x490
  [  203.406258]  [<ffffffff816db320>] entry_SYSCALL_64_fastpath+0x13/0x94

This issue got uncovered after the fix in a08dd0da ("bpf: fix
regression on verifier pruning wrt map lookups"). The reason why it
wasn't noticed before was, because as mentioned in a08dd0da,
mark_map_regs() was doing the id matching incorrectly based on the
uncached regs[regno].id. So, in the first loop, we walked all regs
and as soon as we found regno == i, then this reg's id was cleared
when calling mark_reg_unknown_value() thus that every subsequent
register was probed against id of 0 (which, in combination with the
PTR_TO_MAP_VALUE_OR_NULL type is an invalid condition that no other
register state can hold), and therefore wasn't type transitioned such
as in the spilled register case for the second loop.

Now since that got fixed, it turned out that 57a09bf0 ("bpf:
Detect identical PTR_TO_MAP_VALUE_OR_NULL registers") used
mark_reg_unknown_value() incorrectly for the spilled regs, and thus
hitting the BUG_ON() in some cases due to regno >= MAX_BPF_REG.

Although spilled regs have the same type as the non-spilled regs
for the verifier state, that is, struct bpf_reg_state, they are
semantically different from the non-spilled regs. In other words,
there can be up to 64 (MAX_BPF_STACK / BPF_REG_SIZE) spilled regs
in the stack, for example, register R<x> could have been spilled by
the program to stack location X, Y, Z, and in mark_map_regs() we
need to scan these stack slots of type STACK_SPILL for potential
registers that we have to transition from PTR_TO_MAP_VALUE_OR_NULL.
Therefore, depending on the location, the spilled_regs regno can
be a lot higher than just MAX_BPF_REG's value since we operate on
stack instead. The reset in mark_reg_unknown_value() itself is
just fine, only that the BUG_ON() was inappropriate for this. Fix
it by making a __mark_reg_unknown_value() version that can be
called from mark_map_reg() generically; we know for the non-spilled
case that the regno is always < MAX_BPF_REG anyway.

Fixes: 57a09bf0 ("bpf: Detect identical PTR_TO_MAP_VALUE_OR_NULL registers")
Reported-by: NMartin KaFai Lau <kafai@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>