Christoph Hellwig says:

====================
socket poll related cleanups v2

A couple of cleanups I stumbled upon when studying the networking
poll code.

Changes since v1:
 - drop a dispute patch from this series (to be sent separately)
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fold it into the only caller to make the code simpler and easier to read.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is no point in hiding this logic in a helper.  Also remove the
useless events != 0 check and only busy loop once we know we actually
have a poll method.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For any open socket file descriptor sock->sk->sk_wq->wait will always
point to sock->wq->wait.  That means we can do the shorter dereference
and removal a NULL check and don't have to not worry about any RCU
protection.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The wait_address argument is always directly derived from the filp
argument, so remove it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace calls to kmalloc followed by a memcpy with a direct call to
kmemdup.
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace calls to kmalloc followed by a memcpy with a direct call to
kmemdup.
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

net/sched/act_pedit.c:289:2-3: Unneeded semicolon

Remove unneeded semicolon.

Generated by: scripts/coccinelle/misc/semicolon.cocci
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are no in-tree callers of qed_get_cm_pq_idx_rl since it be there,
so it can be removed.
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since driver is devicetree-based, all device type and charateristic can be
determined by the compatible string and its data. It's unnecessary to
create another dependent function to check chip ID and then decide whether
the specific funciton is being supported on a certain device. It can be
totally replaced by the existing flag, so a cleanup is made by removing
the function and the only user, HWLRO.

MT2701 also have a missing HWLRO support in old code, so add it the same
patch.
Signed-off-by: NSean Wang <sean.wang@mediatek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Improve more in the existing code by reusing dma_zalloc_coherent instead
of dma_alloc_coherent with __GFP_ZERO or superfluous zeroing buffer.
Signed-off-by: NSean Wang <sean.wang@mediatek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 5f81880d ("sysfs, kobject: allow creating kobject belonging
to arbitrary users") incorrectly changed the argument passed as the
parent parameter when calling sysfs_add_file_mode_ns(). This caused some
sysfs attribute files to not be added correctly to certain groups.

Fixes: 5f81880d ("sysfs, kobject: allow creating kobject belonging to arbitrary users")
Signed-off-by: NTyler Hicks <tyhicks@canonical.com>
Reported-by: NHeiner Kallweit <hkallweit1@gmail.com>
Tested-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5e-updates-2018-07-27 (Vxlan updates)

This series from Gal and Saeed provides updates to mlx5 vxlan implementation.

Gal, started with three cleanups to reflect the actual hardware vxlan state
- reflect 4789 UDP port default addition to software database
- check maximum number of vxlan  UDP ports
- cleanup an unused member in vxlan work

Then Gal provides performance optimization by replacing the
vxlan radix tree with a hash table.

Measuring mlx5e_vxlan_lookup_port execution time:

                      Radix Tree   Hash Table
     --------------- ------------ ------------
      Single Stream   161 ns       79  ns (51% improvement)
      Multi Stream    259 ns       136 ns (47% improvement)

    Measuring UDP stream packet rate, single fully utilized TX core:
    Radix Tree: 498,300 PPS
    Hash Table: 555,468 PPS (11% improvement)

Next, from Saeed, vxlan refactoring to allow sharing the vxlan table
between different mlx5 netdevice instances like PF and VF representors,
this is done by making mlx5 vxlan interface more generic and decoupling
it from PF netdevice structures and logic, then moving it into mlx5 core
as a low level interface so it can be used by VF representors, which is
illustrated in the last patch of the serious.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are two problems in this test case:

- When indexing in bash associative array, the subscript is interpreted as
  string, not as a variable name to be expanded.

- The keys stored to t0s and t1s are not DSCP values, but priority +
  base (i.e. the logical DSCP value, not the full bitfield value).

In combination these two bugs conspire to make the test just work,
except it doesn't really test anything and always passes.

Fix the above two problems in obvious manner.
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Stephen Hemminger says:

====================
mtu related changes

While looking at other MTU issues, noticed a couple oppurtunties
for improving user experience.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If an invalid MTU value is set through rtnetlink return extra error
information instead of putting message in kernel log. For other cases
where there is no visible API, keep the error report in the log.

Example:
	# ip li set dev enp12s0 mtu 10000
	Error: mtu greater than device maximum.

	# ifconfig enp12s0 mtu 10000
	SIOCSIFMTU: Invalid argument
	# dmesg | tail -1
	[ 2047.795467] enp12s0: mtu greater than device maximum
Signed-off-by: NStephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Report the minimum and maximum MTU allowed on a device
via netlink so that it can be displayed by tools like
ip link.
Signed-off-by: NStephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When changing MTU, RTNL is held so use rtnl_dereference
instead of rcu_dereference.
Signed-off-by: NStephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit ee205981 ("net/dcb: Add dscp to priority selector type")
added a define for the new DSCP selector type created by
IEEE 802.1Qcd, but missed the comment enumerating all selector types.
Update the comment.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NPetr Machata <petrm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Seems it was missed while adding for first net dev in dual-emac mode.
Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Reviewed-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Xin Long says:

====================
route: add support and selftests for directed broadcast forwarding

Patch 1/2 is the feature and 2/2 is the selftest. Check the changelog
on each of them to know the details.

v1->v2:
  - fix a typo in changelog.
  - fix an uapi break that Davide noticed.
  - flush route cache when bc_forwarding is changed.
  - add the selftest for this patch as Ido's suggestion.

v2->v3:
  - fix an incorrect 'if check' in devinet_conf_proc as David Ahern
    noticed.
  - extend the selftest after one David Ahern fix for vrf.

v3->v4:
  - improve the output log in the selftest as David Ahern suggested.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As Ido's suggestion, this patch is to add a selftest for directed
broadcast forwarding with vrf. It does the assertion by checking
the src IP of the echo-reply packet in ping_test_from.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch implements the feature described in rfc1812#section-5.3.5.2
and rfc2644. It allows the router to forward directed broadcast when
sysctl bc_forwarding is enabled.

Note that this feature could be done by iptables -j TEE, but it would
cause some problems:
  - target TEE's gateway param has to be set with a specific address,
    and it's not flexible especially when the route wants forward all
    directed broadcasts.
  - this duplicates the directed broadcasts so this may cause side
    effects to applications.

Besides, to keep consistent with other os router like BSD, it's also
necessary to implement it in the route rx path.

Note that route cache needs to be flushed when bc_forwarding is
changed.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When freebind feature is set of an IPv6 socket, any source address can
be used when sending UDP datagrams using IPv6 PKTINFO ancillary
message. Global non-local bind feature was added in commit
35a256fe ("ipv6: Nonlocal bind") for IPv6. This commit also allows
IPv6 source address spoofing when non-local bind feature is enabled.
Signed-off-by: NVincent Bernat <vincent@bernat.im>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'linux-can-next-for-4.19-20180727' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2018-01-16

this is a pull request for net-next/master consisting of 38 patches.

Dan Murphy's patch fixes the path to a file in the comment of the CAN
Error Message Frame Mask structure.

A patch by Colin Ian King fixes a typo in the cc770 driver.

The next patch is by me an sorts the Kconfigand Makefile entries of the
CAN-USB driver subdir alphabetically.

The patch by Jakob Unterwurzacher adds support for the UCAN USB-CAN
adapter.

YueHaibing's patch replaces a open coded skb_put()+memset() by
skb_put_zero() in the CAN-dev infrastructure.

Zhu Yi provides a patch to enable multi-queue CAN devices.

Three patches by Luc Van Oostenryck fix the return value of several
driver's xmit function, I contribute a patch for the a fourth driver.

Fabio Estevam's patch switches the flexcan driver to SPDX identifier.

Two patches by Jia-Ju Bai replace the mdelay() by a usleep_range() in
the sja1000 drivers.

The next 6 patches are by Anssi Hannula and refactor the xilinx CAN
driver and add support for the xilinx CAN FD core.

A patch by Gustavo A. R. Silva adds fallthrough annotation to the
peak_usb driver.

5 patches by Stephane Grosjean for the peak CANFD driver do some
cleanups and provide more improvements for further firmware releases.

The remaining 13 patches are by Jimmy Assarsson and the first clean up
the kvaser_usb driver, so that the later patches add support for the
Kvaser USB hydra family.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are no in-tree callers of qed_set_gft_event_id_cm_hdr.
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are no in-tree callers.
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Doron Roberts-Kedes says:

====================
tls: Fix improper revert in zerocopy_from_iter

This series fixes the improper iov_iter_revert introcded in
"tls: Fix zerocopy_from_iter iov handling".
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current code is problematic because the iov_iter is reverted and
never advanced in the non-error case. This patch skips the revert in the
non-error case. This patch also fixes the amount by which the iov_iter
is reverted. Currently, iov_iter is reverted by size, which can be
greater than the amount by which the iter was actually advanced.
Instead, only revert by the amount that the iter was advanced.

Fixes: 47187998 ("tls: Fix zerocopy_from_iter iov handling")
Signed-off-by: NDoron Roberts-Kedes <doronrk@fb.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tls_push_record either returns 0 on success or a negative value on failure.
This patch removes code that would only be executed if tls_push_record
were to return a positive value.
Signed-off-by: NDoron Roberts-Kedes <doronrk@fb.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Gregory CLEMENT says:

====================
A fix and a few improvements on mvneta

This series brings some improvements for the mvneta driver and also
adds a fix.

Compared to the v2, the main change is another patch fixing a bug
in mtu_change.

Changelog:
v1 -> v2

 - In patch 2, use EXPORT_SYMBOL_GPL for mvneta_bm_get and
   mvneta_bm_put to be used in module, reported by kbuild test robot.

 - In patch 4, add the counter to the driver's ethtool state,
   suggested by David Miller.

 - In patch 6, use a single if, suggested by Marcin Wojtas

v2 -> v3

 - Adding a patch fixing the mtu change issue

 - Removing the inline keyword for mvneta_rx_refill() and let the
   comiler decided, suggested by David Miller.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With system having a small memory (around 256MB), the state "cannot
allocate memory to refill with new buffer" is reach pretty quickly.

By this patch we changed buffer allocation method to a better handling of
this use case by avoiding memory allocation issues.
Signed-off-by: NYelena Krivosheev <yelena@marvell.com>
[gregory: extract from a larger patch]
Signed-off-by: NGregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If the checksum offload feature is not set, then there is no point to
check the status of the hardware.

[gregory: extract from a larger patch]
Signed-off-by: NYelena Krivosheev <yelena@marvell.com>
Signed-off-by: NGregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Instead of trying to allocate the exact amount of memory for each
descriptor use a page for each of them, it allows to simplify the
allocation management and increase the performance of the driver.

Based on the work of Yelena Krivosheev <yelena@marvell.com>
Signed-off-by: NGregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In order to improve the diagnostic in case of error, make the distinction
between refill error and skb allocation error. Also make the information
available through the ethtool state.

Based on the work of Yelena Krivosheev <yelena@marvell.com>
Signed-off-by: NGregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The initial values were too small leading to poor performance when using
the software buffer management.
Signed-off-by: NYelena Krivosheev <yelena@marvell.com>
[gregory: extract from a larger patch]
Signed-off-by: NGregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On year ago Rob Herring wanted to remove the data pointer from the
device_node structure[1]. The mvneta driver seemed to be the only one
which used (abused ?) it. However, the proposal of Rob to remove this
pointer from the driver introduced a regression, and I tested and fixed an
alternative way, but it was never submitted as a proper patch.

Now here it is: Instead of using the device_node structure ->data
pointer, we store the BM private data as the driver data of the BM
platform_device. The core mvneta code can retrieve it by doing a lookup
on which platform_device corresponds to the BM device tree node using
of_find_device_by_node(), and get its driver data

[1]https://www.spinics.net/lists/netdev/msg445197.htmlSigned-off-by: NGregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It is incorrect to enable TX/RX queues (call by mvneta_port_up()) for
port without link. Indeed MTU change for interface without link causes TX
queues to stuck.

Fixes: c5aff182 ("net: mvneta: driver for Marvell Armada 370/XP
network unit")
Signed-off-by: NYelena Krivosheev <yelena@marvell.com>
[gregory.clement: adding Fixes tags and rewording commit log]
Signed-off-by: NGregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The mvneta Ethernet driver is used on a few different Marvell SoCs.
Some SoCs have per cpu interrupts for Ethernet events. Some SoCs have
a single interrupt, independent of the CPU. The driver handles this by
having a per CPU napi structure when there are per CPU interrupts, and
a global napi structure when there is a single interrupt.

When the napi core calls mvneta_poll(), it passes the napi
instance. This was not being propagated through the call chain, and
instead the per-cpu napi instance was passed to napi_gro_receive()
call. This breaks when there is a single global napi instance.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Fixes: 2636ac3c ("net: mvneta: Add network support for Armada 3700 SoC")
Signed-off-by: NGregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove uplink representor netdevice private structure lookup, and use
mlx5 core handle directly from representor private structure to lookup
vxlan ports.
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com>