The array of pointers to register blocks never changes, so constify it.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

These defines don't accomplish much as GPIO_# is the same thing as #.
Each CPU already provides helpful symbolic defines like GPIO_<PIN>
which everyone uses, so just punt these # ones.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Not sure how these guys slipped in, but they're annoying me.
So bring these unicode space gremlins down to earth to normal
ascii spaces.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

For now, this only supports gptimers.  Support for dedicated PWM devices
as found on newer parts to come.
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

The API is geared around timer ids, except for the act of enabling
and disabling timers.  So add a small helper to fill out the gap.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

The alignment is normally handled by PERCPU(), but we need to do it
ourselves in the XIP build due to the custom layout.
Signed-off-by: NSteven Miao <realmz6@gmail.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Use proper helper macros for reading/writing the MMRs rather than
volatile markings on the struct.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Now that asm/gptimers.h has the hardware register struct layout, there's
no need to duplicate things locally.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Passing a non-simple expression in as the addr arg could incorrectly
apply the pointer cast resulting in misbehavior.  Add proper paren.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NMike Frysinger <vapier@gentoo.org>

The address limit is already set in flush_old_exec() so this
set_fs(USER_DS) is redundant.
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NMike Frysinger <vapier@gentoo.org>

These flashes are always on the board, so might as well enable them by
default rather than a module.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

The documentation for the IMDMA channels appears to be incorrect.
These DMA blocks don't actually have PERIPHERAL_MAP MMRs for us
to access.  Attempts to do so lead to system mmr hardware errors.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NMike Frysinger <vapier@gentoo.org>

The Blackfin mutex.h is merely a copy of an older asm-generic/mutex-dec.h,
so punt it and just use the common one directly.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

This moves the double fault data used at boot time into a single struct
which can then easily be addressed with indexed loads rather than having
to explicitly load multiple addresses.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NMike Frysinger <vapier@gentoo.org>

This just imports all of the optimization work done in the
common startup code.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

The default for the Blackfin SPI driver is 8 bits and dma disabled,
so many of the bfin5xx_spi_chip resources are redundant.  So punt
those parts.

Further, drivers should themselves be declaring 16 bit transfers,
so for those that do, and for the ones which no longer do 16 bit
transfers, drop the bfin5xx_spi_chip resources.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NMike Frysinger <vapier@gentoo.org>

No need for one line header stubs.  Just declare it in Kbuild.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Merge branch 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86-64, vdso: Do not allocate memory for the vDSO
  clocksource: Change __ARCH_HAS_CLOCKSOURCE_DATA to a CONFIG option
  x86, vdso: Drop now wrong comment
  Document the vDSO and add a reference parser
  ia64: Replace clocksource.fsys_mmio with generic arch data
  x86-64: Move vread_tsc and vread_hpet into the vDSO
  clocksource: Replace vread with generic arch data
  x86-64: Add --no-undefined to vDSO build
  x86-64: Allow alternative patching in the vDSO
  x86: Make alternative instruction pointers relative
  x86-64: Improve vsyscall emulation CS and RIP handling
  x86-64: Emulate legacy vsyscalls
  x86-64: Fill unused parts of the vsyscall page with 0xcc
  x86-64: Remove vsyscall number 3 (venosys)
  x86-64: Map the HPET NX
  x86-64: Remove kernel.vsyscall64 sysctl
  x86-64: Give vvars their own page
  x86-64: Document some of entry_64.S
  x86-64: Fix alignment of jiffies variable

* 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, UV: Correct UV2 BAU destination timeout
  x86, UV: Correct failed topology memory leak
  x86, UV: Remove cpumask_t from the stack
  x86, UV: Rename hubmask to pnmask
  x86, UV: Correct reset_with_ipi()
  x86, UV: Allow for non-consecutive sockets
  x86, UV: Inline header file functions
  x86, UV: Fix smp_processor_id() use in a preemptable region
  x66, UV: Enable 64-bit ACPI MFCG support for SGI UV2 platform
  x86, UV: Clean up uv_mmrs.h

Merge branch 'x86-signal-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-signal-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Kill handle_signal()->set_fs()
  x86, do_signal: Simplify the TS_RESTORE_SIGMASK logic
  x86, signals: Convert the X86_32 code to use set_current_blocked()
  x86, signals: Convert the IA32_EMULATION code to use set_current_blocked()

Merge branch 'x86-numa-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-numa-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, numa: Implement pfn -> nid mapping granularity check
  x86, mm: s/PAGES_PER_ELEMENT/PAGES_PER_SECTION/

Merge branch 'x86-mtrr-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-mtrr-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, mtrr: Use pci_dev->revision
  x86, mtrr: use stop_machine APIs for doing MTRR rendezvous
  stop_machine: implement stop_machine_from_inactive_cpu()
  stop_machine: reorganize stop_cpus() implementation
  x86, mtrr: lock stop machine during MTRR rendezvous sequence

Merge branch 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, microcode, AMD: Fix section header size check
  x86, microcode, AMD: Correct buf references

* 'x86-mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, mce: Use mce_sysdev_ prefix to group functions
  x86, mce: Use mce_chrdev_ prefix to group functions
  x86, mce: Cleanup mce_read()
  x86, mce: Cleanup mce_create()/remove_device()
  x86, mce: Check the result of ancient_init()
  x86, mce: Introduce mce_gather_info()
  x86, mce: Replace MCM_ with MCI_MISC_
  x86, mce: Replace MCE_SELF_VECTOR by irq_work
  x86, mce, severity: Clean up trivial coding style problems
  x86, mce, severity: Cleanup severity table
  x86, mce, severity: Make formatting a bit more readable
  x86, mce, severity: Fix two severities table signatures

* 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, efi: Properly pre-initialize table pointers
  x86, efi: Add infrastructure for UEFI 2.0 runtime services
  x86, efi: Fix argument types for SetVariable()

* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, intel, power: Correct the MSR_IA32_ENERGY_PERF_BIAS message
  x86, msr: Fix typo in ENERGY_PERF_BIAS_POWERSAVE
  x86, intel, power: Initialize MSR_IA32_ENERGY_PERF_BIAS

Merge branch 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, smpboot: Mark the names[] array in __inquire_remote_apic() as const
  x86: Convert vmalloc()+memset() to vzalloc()

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Fix write lock scalability 64-bit issue
  x86: Unify rwsem assembly implementation
  x86: Unify rwlock assembly implementation
  x86, asm: Fix binutils 2.16 issue with __USER32_CS
  x86, asm: Cleanup thunk_64.S
  x86, asm: Flip RESTORE_ARGS arguments logic
  x86, asm: Flip SAVE_ARGS arguments logic
  x86, asm: Thin down SAVE/RESTORE_* asm macros

Merge branch 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, ioapic: Print IR_IO_APIC_route_entry when IR is enabled
  x86, ioapic: Print IRTE when IR is enabled
  x86, x2apic: Preserve high 32-bits of IA32_APIC_BASE MSR
  x86, ioapic: Also print Dest field
  x86, ioapic: Format clean up for IOAPIC output
  x86: print APIC data a little later during boot

Merge branch 'timers-rtc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-rtc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Serialize EFI time accesses on rtc_lock
  x86: Serialize SMP bootup CMOS accesses on rtc_lock
  rtc: stmp3xxx: Remove UIE handlers
  rtc: stmp3xxx: Get rid of mach-specific accessors
  rtc: stmp3xxx: Initialize drvdata before registering device
  rtc: stmp3xxx: Port stmp-functions to mxs-equivalents
  rtc: stmp3xxx: Restore register definitions
  rtc: vt8500: Use define instead of hardcoded value for status bit

Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  time: Fix stupid KERN_WARN compile issue
  rtc: Avoid accumulating time drift in suspend/resume
  time: Avoid accumulating time drift in suspend/resume
  time: Catch invalid timespec sleep values in __timekeeping_inject_sleeptime

Merge branch 'timers-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  mips: Fix i8253 clockevent fallout
  i8253: Cleanup outb/inb magic
  arm: Footbridge: Use common i8253 clockevent
  mips: Use common i8253 clockevent
  x86: Use common i8253 clockevent
  i8253: Create common clockevent implementation
  i8253: Export i8253_lock unconditionally
  pcpskr: MIPS: Make config dependencies finer grained
  pcspkr: Cleanup Kconfig dependencies
  i8253: Move remaining content and delete asm/i8253.h
  i8253: Consolidate definitions of PIT_LATCH
  x86: i8253: Consolidate definitions of global_clock_event
  i8253: Alpha, PowerPC: Remove unused asm/8253pit.h
  alpha: i8253: Cleanup remaining users of i8253pit.h
  i8253: Remove I8253_LOCK config
  i8253: Make pcsp sound driver use the shared i8253_lock
  i8253: Make pcspkr input driver use the shared i8253_lock
  i8253: Consolidate all kernel definitions of i8253_lock
  i8253: Unify all kernel declarations of i8253_lock
  i8253: Create linux/i8253.h and use it in all 8253 related files

Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (24 commits)
  sched: Cleanup duplicate local variable in [enqueue|dequeue]_task_fair
  sched: Replace use of entity_key()
  sched: Separate group-scheduling code more clearly
  sched: Reorder root_domain to remove 64 bit alignment padding
  sched: Do not attempt to destroy uninitialized rt_bandwidth
  sched: Remove unused function cpu_cfs_rq()
  sched: Fix (harmless) typo 'CONFG_FAIR_GROUP_SCHED'
  sched, cgroup: Optimize load_balance_fair()
  sched: Don't update shares twice on on_rq parent
  sched: update correct entity's runtime in check_preempt_wakeup()
  xtensa: Use generic config PREEMPT definition
  h8300: Use generic config PREEMPT definition
  m32r: Use generic PREEMPT config
  sched: Skip autogroup when looking for all rt sched groups
  sched: Simplify mutex_spin_on_owner()
  sched: Remove rcu_read_lock() from wake_affine()
  sched: Generalize sleep inside spinlock detection
  sched: Make sleeping inside spinlock detection working in !CONFIG_PREEMPT
  sched: Isolate preempt counting in its own config option
  sched: Remove pointless in_atomic() definition check
  ...

Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (123 commits)
  perf: Remove the nmi parameter from the oprofile_perf backend
  x86, perf: Make copy_from_user_nmi() a library function
  perf: Remove perf_event_attr::type check
  x86, perf: P4 PMU - Fix typos in comments and style cleanup
  perf tools: Make test use the preset debugfs path
  perf tools: Add automated tests for events parsing
  perf tools: De-opt the parse_events function
  perf script: Fix display of IP address for non-callchain path
  perf tools: Fix endian conversion reading event attr from file header
  perf tools: Add missing 'node' alias to the hw_cache[] array
  perf probe: Support adding probes on offline kernel modules
  perf probe: Add probed module in front of function
  perf probe: Introduce debuginfo to encapsulate dwarf information
  perf-probe: Move dwarf library routines to dwarf-aux.{c, h}
  perf probe: Remove redundant dwarf functions
  perf probe: Move strtailcmp to string.c
  perf probe: Rename DIE_FIND_CB_FOUND to DIE_FIND_CB_END
  tracing/kprobe: Update symbol reference when loading module
  tracing/kprobes: Support module init function probing
  kprobes: Return -ENOENT if probe point doesn't exist
  ...