This patch converts netlink to use rhashtable max_size instead
of the obsolete max_shift.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds the parameters max_size and min_size which are
meant to replace max_shift and min_shift.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Keeping both size and shift is silly.  We only need one.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Keyur Chudgar says:

====================
drivers: net: xgene: Add second SGMII based 1G interface

This patch adds support for second SGMII based 1G interface.
====================
Signed-off-by: NKeyur Chudgar <kchudgar@apm.com>
Signed-off-by: NIyappan Subramanian <isubramanian@apm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- Added resource initialization based on port-id field
- Enabled second SGMII 1G interface
Signed-off-by: NKeyur Chudgar <kchudgar@apm.com>
Signed-off-by: NIyappan Subramanian <isubramanian@apm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- Added new SGMII node for port 1
- Added port-id field
Signed-off-by: NKeyur Chudgar <kchudgar@apm.com>
Signed-off-by: NIyappan Subramanian <isubramanian@apm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NKeyur Chudgar <kchudgar@apm.com>
Signed-off-by: NIyappan Subramanian <isubramanian@apm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ying Xue says:

====================
tipc: fix netns refcnt leak

The series aims to eliminate the issue of netns refcount leak. But
during fixing it, another two additional problems are found. So all
of known issues associated with the netns refcnt leak are resolved
at the same time in the patchset.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The TIPC topology server is a per namespace service associated with the
tipc name {1, 1}. When a namespace is deleted, that name must be withdrawn
before we call sk_release_kernel because the kernel socket release is
done in init_net and trying to withdraw a TIPC name published in another
namespace will fail with an error as:

[  170.093264] Unable to remove local publication
[  170.093264] (type=1, lower=1, ref=2184244004, key=2184244005)

We fix this by breaking the association between the topology server name
and socket before calling sk_release_kernel.
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Reviewed-by: NErik Hugne <erik.hugne@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

[   28.531768] =============================================
[   28.532322] [ INFO: possible recursive locking detected ]
[   28.532322] 3.19.0+ #194 Not tainted
[   28.532322] ---------------------------------------------
[   28.532322] insmod/583 is trying to acquire lock:
[   28.532322]  (&(&nseq->lock)->rlock){+.....}, at: [<ffffffffa000d219>] tipc_nametbl_remove_publ+0x49/0x2e0 [tipc]
[   28.532322]
[   28.532322] but task is already holding lock:
[   28.532322]  (&(&nseq->lock)->rlock){+.....}, at: [<ffffffffa000e0dc>] tipc_nametbl_stop+0xfc/0x1f0 [tipc]
[   28.532322]
[   28.532322] other info that might help us debug this:
[   28.532322]  Possible unsafe locking scenario:
[   28.532322]
[   28.532322]        CPU0
[   28.532322]        ----
[   28.532322]   lock(&(&nseq->lock)->rlock);
[   28.532322]   lock(&(&nseq->lock)->rlock);
[   28.532322]
[   28.532322]  *** DEADLOCK ***
[   28.532322]
[   28.532322]  May be due to missing lock nesting notation
[   28.532322]
[   28.532322] 3 locks held by insmod/583:
[   28.532322]  #0:  (net_mutex){+.+.+.}, at: [<ffffffff8163e30f>] register_pernet_subsys+0x1f/0x50
[   28.532322]  #1:  (&(&tn->nametbl_lock)->rlock){+.....}, at: [<ffffffffa000e091>] tipc_nametbl_stop+0xb1/0x1f0 [tipc]
[   28.532322]  #2:  (&(&nseq->lock)->rlock){+.....}, at: [<ffffffffa000e0dc>] tipc_nametbl_stop+0xfc/0x1f0 [tipc]
[   28.532322]
[   28.532322] stack backtrace:
[   28.532322] CPU: 1 PID: 583 Comm: insmod Not tainted 3.19.0+ #194
[   28.532322] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007
[   28.532322]  ffffffff82394460 ffff8800144cb928 ffffffff81792f3e 0000000000000007
[   28.532322]  ffffffff82394460 ffff8800144cba28 ffffffff810a8080 ffff8800144cb998
[   28.532322]  ffffffff810a4df3 ffff880013e9cb10 ffffffff82b0d330 ffff880013e9cb38
[   28.532322] Call Trace:
[   28.532322]  [<ffffffff81792f3e>] dump_stack+0x4c/0x65
[   28.532322]  [<ffffffff810a8080>] __lock_acquire+0x740/0x1ca0
[   28.532322]  [<ffffffff810a4df3>] ? __bfs+0x23/0x270
[   28.532322]  [<ffffffff810a7506>] ? check_irq_usage+0x96/0xe0
[   28.532322]  [<ffffffff810a8a73>] ? __lock_acquire+0x1133/0x1ca0
[   28.532322]  [<ffffffffa000d219>] ? tipc_nametbl_remove_publ+0x49/0x2e0 [tipc]
[   28.532322]  [<ffffffff810a9c0c>] lock_acquire+0x9c/0x140
[   28.532322]  [<ffffffffa000d219>] ? tipc_nametbl_remove_publ+0x49/0x2e0 [tipc]
[   28.532322]  [<ffffffff8179c41f>] _raw_spin_lock_bh+0x3f/0x50
[   28.532322]  [<ffffffffa000d219>] ? tipc_nametbl_remove_publ+0x49/0x2e0 [tipc]
[   28.532322]  [<ffffffffa000d219>] tipc_nametbl_remove_publ+0x49/0x2e0 [tipc]
[   28.532322]  [<ffffffffa000e11e>] tipc_nametbl_stop+0x13e/0x1f0 [tipc]
[   28.532322]  [<ffffffffa000dfe5>] ? tipc_nametbl_stop+0x5/0x1f0 [tipc]
[   28.532322]  [<ffffffffa0004bab>] tipc_init_net+0x13b/0x150 [tipc]
[   28.532322]  [<ffffffffa0004a75>] ? tipc_init_net+0x5/0x150 [tipc]
[   28.532322]  [<ffffffff8163dece>] ops_init+0x4e/0x150
[   28.532322]  [<ffffffff810aa66d>] ? trace_hardirqs_on+0xd/0x10
[   28.532322]  [<ffffffff8163e1d3>] register_pernet_operations+0xf3/0x190
[   28.532322]  [<ffffffff8163e31e>] register_pernet_subsys+0x2e/0x50
[   28.532322]  [<ffffffffa002406a>] tipc_init+0x6a/0x1000 [tipc]
[   28.532322]  [<ffffffffa0024000>] ? 0xffffffffa0024000
[   28.532322]  [<ffffffff810002d9>] do_one_initcall+0x89/0x1c0
[   28.532322]  [<ffffffff811b7cb0>] ? kmem_cache_alloc_trace+0x50/0x1b0
[   28.532322]  [<ffffffff810e725b>] ? do_init_module+0x2b/0x200
[   28.532322]  [<ffffffff810e7294>] do_init_module+0x64/0x200
[   28.532322]  [<ffffffff810e9353>] load_module+0x12f3/0x18e0
[   28.532322]  [<ffffffff810e5890>] ? show_initstate+0x50/0x50
[   28.532322]  [<ffffffff810e9a19>] SyS_init_module+0xd9/0x110
[   28.532322]  [<ffffffff8179f3b3>] sysenter_dispatch+0x7/0x1f

Before tipc_purge_publications() calls tipc_nametbl_remove_publ() to
remove a publication with a name sequence, the name sequence's lock
is held. However, when tipc_nametbl_remove_publ() calling
tipc_nameseq_remove_publ() to remove the publication, it first tries
to query name sequence instance with the publication, and then holds
the lock of the found name sequence. But as the lock may be already
taken in tipc_purge_publications(), deadlock happens like above
scenario demonstrated. As tipc_nameseq_remove_publ() doesn't grab name
sequence's lock, the deadlock can be avoided if it's directly invoked
by tipc_purge_publications().

Fixes: 97ede29e ("tipc: convert name table read-write lock to RCU")
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Reviewed-by: NErik Hugne <erik.hugne@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the TIPC module is loaded, we launch a topology server in kernel
space, which in its turn is creating TIPC sockets for communication
with topology server users. Because both the socket's creator and
provider reside in the same module, it is necessary that the TIPC
module's reference count remains zero after the server is started and
the socket created; otherwise it becomes impossible to perform "rmmod"
even on an idle module.

Currently, we achieve this by defining a separate "tipc_proto_kern"
protocol struct, that is used only for kernel space socket allocations.
This structure has the "owner" field set to NULL, which restricts the
module reference count from being be bumped when sk_alloc() for local
sockets is called. Furthermore, we have defined three kernel-specific
functions, tipc_sock_create_local(), tipc_sock_release_local() and
tipc_sock_accept_local(), to avoid the module counter being modified
when module local sockets are created or deleted. This has worked well
until we introduced name space support.

However, after name space support was introduced, we have observed that
a reference count leak occurs, because the netns counter is not
decremented in tipc_sock_delete_local().

This commit remedies this problem. But instead of just modifying
tipc_sock_delete_local(), we eliminate the whole parallel socket
handling infrastructure, and start using the regular sk_create_kern(),
kernel_accept() and sk_release_kernel() calls. Since those functions
manipulate the module counter, we must now compensate for that by
explicitly decrementing the counter after module local sockets are
created, and increment it just before calling sk_release_kernel().

Fixes: a62fbcce ("tipc: make subscriber server support net namespace")
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Reviewed-by: NJon Maloy <jon.maloy@ericson.com>
Reviewed-by: NErik Hugne <erik.hugne@ericsson.com>
Reported-by: NCong Wang <cwang@twopensource.com>
Tested-by: NErik Hugne <erik.hugne@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Eric Dumazet says:

====================
inet: tcp listener refactoring, part 12

By adding a pointer back to listener, we are preparing synack rtx
handling to no longer be governed by listener keepalive timer,
as this is the most problematic source of contention on listener
spinlock. Note that TCP FastOpen had such pointer anyway, so we
make it generic.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

While testing last patch series, I found req sock refcounting was wrong.

We must set skc_refcnt to 1 for all request socks added in hashes,
but also on request sockets created by FastOpen or syncookies.

It is tricky because we need to defer this initialization so that
future RCU lookups do not try to take a refcount on a not yet
fully initialized request socket.

Also get rid of ireq_refcnt alias.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Fixes: 13854e5a ("inet: add proper refcounting to request sock")
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It is not because a TCP listener is FastOpen ready that
all incoming sockets actually used FastOpen.

Avoid taking queue->fastopenq->lock if not needed.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The listener field in struct tcp_request_sock is a pointer
back to the listener. We now have req->rsk_listener, so TCP
only needs one boolean and not a full pointer.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Once we'll be able to lookup request sockets in ehash table,
we'll need to get access to listener which created this request.

This avoid doing a lookup to find the listener, which benefits
for a more solid SO_REUSEPORT, and is needed once we no
longer queue request sock into a listener private queue.

Note that 'struct tcp_request_sock'->listener could be reduced
to a single bit, as TFO listener should match req->rsk_listener.
TFO will no longer need to hold a reference on the listener.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

inet_reqsk_alloc() is becoming fat and should not be inlined.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

listener socket can be used to set net pointer, and will
be later used to hold a reference on listener.

Add a const qualifier to first argument (struct request_sock_ops *),
and factorize all write_pnet(&ireq->ireq_net, sock_net(sk));
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Eric Dumazet says:

====================
inet: tcp listener refactoring, part 11

Before inserting request sockets into general (ehash) table,
we need to prepare netfilter to cope with them, as they are
not full sockets.

I'll later change xt_socket to get full support, including for
request sockets (NEW_SYN_RECV)

Save 8 bytes in inet_request_sock on 64bit arches. We'll soon add
a pointer to the listener socket.

I included two TCP changes in this patch series.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tcp_oow_rate_limited() is hardly used in fast path, there is
no point inlining it.
Signed-of-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This big helper is called once from tcp_conn_request(), there is no
point having it in an include. Compiler will inline it anyway.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On 64bit arches, we can save 8 bytes in inet_request_sock
by moving ir_mark to fill a hole.

While we are at it, inet_request_mark() can get a const qualifier
for listener socket.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

TCP request socks soon will be visible in ehash table.

xt_socket will be able to match them, but first we need
to make sure to not consider them as full sockets.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

TCP request socks soon will be visible in ehash table.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Upcoming request sockets have TCP_NEW_SYN_RECV state and should
be special cased a bit like TCP_TIME_WAIT sockets.

Signed-off-by; Eric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

as a follow on to patch 70006af9 ("bpf: allow eBPF access skb fields")
this patch allows 'protocol' and 'vlan_tci' fields to be accessible
from extended BPF programs.

The usage of 'protocol', 'vlan_present' and 'vlan_tci' fields is the same as
corresponding SKF_AD_PROTOCOL, SKF_AD_VLAN_TAG_PRESENT and SKF_AD_VLAN_TAG
accesses in classic BPF.
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fabian Frederick says:

====================
drivers/net: constify of_device_id array

This small patchset adds const to of_device_id arrays in
drivers/net branch.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>