- 06 12月, 2021 40 次提交
-
-
由 Joakim Zhang 提交于
stable inclusion from stable-5.10.81 commit ac4bb9951c2cb9e40d5cf9a010ac8dead6f46501 bugzilla: 185832 https://gitee.com/openeuler/kernel/issues/I4L9CF Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=ac4bb9951c2cb9e40d5cf9a010ac8dead6f46501 -------------------------------- commit 4691ffb1 upstream. Fix system hang with below sequences: ~# ifconfig ethx down ~# ifconfig ethx hw ether xx:xx:xx:xx:xx:xx After ethx down, stmmac all clocks gated off and then register access causes system hang. Fixes: 5ec55823 ("net: stmmac: add clocks management for gmac driver") Signed-off-by: NJoakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NMeng Li <Meng.Li@windriver.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NChen Jun <chenjun102@huawei.com> Acked-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NChen Jun <chenjun102@huawei.com> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
-
由 Yang Yingliang 提交于
stable inclusion from stable-5.10.81 commit bcf37522432dcacae18e1cec7c41308505d5ea22 bugzilla: 185832 https://gitee.com/openeuler/kernel/issues/I4L9CF Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=bcf37522432dcacae18e1cec7c41308505d5ea22 -------------------------------- commit 30f347ae upstream Add the missing unlock before return from stmmac_suspend() in the error handling case. Fixes: 5ec55823 ("net: stmmac: add clocks management for gmac driver") Reported-by: NHulk Robot <hulkci@huawei.com> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NMeng Li <Meng.Li@windriver.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NChen Jun <chenjun102@huawei.com> Acked-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NChen Jun <chenjun102@huawei.com> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
-
由 Wei Yongjun 提交于
stable inclusion from stable-5.10.81 commit 483ed89522b0f28e8bb0947646330c9200bf69d8 bugzilla: 185832 https://gitee.com/openeuler/kernel/issues/I4L9CF Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=483ed89522b0f28e8bb0947646330c9200bf69d8 -------------------------------- commit 7ec05a60 upstream Get rid of the CONFIG_PM_SLEEP ifdefery to fix the build error and use __maybe_unused for the suspend()/resume() hooks to avoid build warning: drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c:769:21: error: 'stmmac_runtime_suspend' undeclared here (not in a function); did you mean 'stmmac_suspend'? 769 | SET_RUNTIME_PM_OPS(stmmac_runtime_suspend, stmmac_runtime_resume, NULL) | ^~~~~~~~~~~~~~~~~~~~~~ ./include/linux/pm.h:342:21: note: in definition of macro 'SET_RUNTIME_PM_OPS' 342 | .runtime_suspend = suspend_fn, \ | ^~~~~~~~~~ drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c:769:45: error: 'stmmac_runtime_resume' undeclared here (not in a function) 769 | SET_RUNTIME_PM_OPS(stmmac_runtime_suspend, stmmac_runtime_resume, NULL) | ^~~~~~~~~~~~~~~~~~~~~ ./include/linux/pm.h:343:20: note: in definition of macro 'SET_RUNTIME_PM_OPS' 343 | .runtime_resume = resume_fn, \ | ^~~~~~~~~ Fixes: 5ec55823 ("net: stmmac: add clocks management for gmac driver") Reported-by: NHulk Robot <hulkci@huawei.com> Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NMeng Li <Meng.Li@windriver.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NChen Jun <chenjun102@huawei.com> Acked-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NChen Jun <chenjun102@huawei.com> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
-
由 Joakim Zhang 提交于
stable inclusion from stable-5.10.81 commit 3afe11be6435e126f1507ddf1a9d0e5a0d90b336 bugzilla: 185832 https://gitee.com/openeuler/kernel/issues/I4L9CF Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=3afe11be6435e126f1507ddf1a9d0e5a0d90b336 -------------------------------- commit 5ec55823 upstream. This patch intends to add clocks management for stmmac driver: If CONFIG_PM enabled: 1. Keep clocks disabled after driver probed. 2. Enable clocks when up the net device, and disable clocks when down the net device. If CONFIG_PM disabled: Keep clocks always enabled after driver probed. Note: 1. It is fine for ethtool, since the way of implementing ethtool_ops::begin in stmmac is only can be accessed when interface is enabled, so the clocks are ticked. 2. The MDIO bus has a different life cycle to the MAC, need ensure clocks are enabled when _mdio_read/write() need clocks, because these functions can be called while the interface it not opened. Stable backport notes: When run below command to remove ethernet driver on stratix10 platform, there will be warning trace as below: $ cd /sys/class/net/eth0/device/driver/ $ echo ff800000.ethernet > unbind WARNING: CPU: 3 PID: 386 at drivers/clk/clk.c:810 clk_core_unprepare+0x114/0x274 Modules linked in: sch_fq_codel CPU: 3 PID: 386 Comm: sh Tainted: G W 5.10.74-yocto-standard #1 Hardware name: SoCFPGA Stratix 10 SoCDK (DT) pstate: 00000005 (nzcv daif -PAN -UAO -TCO BTYPE=--) pc : clk_core_unprepare+0x114/0x274 lr : clk_core_unprepare+0x114/0x274 sp : ffff800011bdbb10 clk_core_unprepare+0x114/0x274 clk_unprepare+0x38/0x50 stmmac_remove_config_dt+0x40/0x80 stmmac_pltfr_remove+0x64/0x80 platform_drv_remove+0x38/0x60 ... .. el0_sync_handler+0x1a4/0x1b0 el0_sync+0x180/0x1c0 This issue is introduced by introducing upstream commit 8f269102 ("net: stmmac: disable clocks in stmmac_remove_config_dt()") But in latest mainline kernel, there is no this issue. Because this patch improved clocks management for stmmac driver. Therefore, backport it and its fixing patches to stable kernel v5.10. Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NJoakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Cc: stable@vger.kernel.org Signed-off-by: NMeng Li <Meng.Li@windriver.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NChen Jun <chenjun102@huawei.com> Acked-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NChen Jun <chenjun102@huawei.com> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
-
由 Masami Hiramatsu 提交于
stable inclusion from stable-5.10.81 commit f27060e28efcbd939e4ae6cd2ecc2ba7d2f5d93d bugzilla: 185832 https://gitee.com/openeuler/kernel/issues/I4L9CF Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=f27060e28efcbd939e4ae6cd2ecc2ba7d2f5d93d -------------------------------- commit 1ae43851 upstream. Free unused memblock in a error case to fix memblock leak in xbc_make_cmdline(). Link: https://lkml.kernel.org/r/163177339181.682366.8713781325929549256.stgit@devnote2 Fixes: 51887d03 ("bootconfig: init: Allow admin to use bootconfig for kernel command line") Signed-off-by: NMasami Hiramatsu <mhiramat@kernel.org> Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NChen Jun <chenjun102@huawei.com> Acked-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NChen Jun <chenjun102@huawei.com> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
-
由 Xie Yongji 提交于
stable inclusion from stable-5.10.81 commit 04e46514fef692ccd0bca6fbab7fa1e63e5cd05a bugzilla: 185832 https://gitee.com/openeuler/kernel/issues/I4L9CF Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=04e46514fef692ccd0bca6fbab7fa1e63e5cd05a -------------------------------- commit af3c570f upstream. Remove loop_validate_block_size() and use the block layer helper to validate block size. Signed-off-by: NXie Yongji <xieyongji@bytedance.com> Link: https://lore.kernel.org/r/20211026144015.188-4-xieyongji@bytedance.comSigned-off-by: NJens Axboe <axboe@kernel.dk> Cc: Tadeusz Struk <tadeusz.struk@linaro.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NChen Jun <chenjun102@huawei.com> Conflicts: drivers/block/loop.c Acked-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NChen Jun <chenjun102@huawei.com> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
-
由 Xie Yongji 提交于
stable inclusion from stable-5.10.81 commit 79ff56c613c193744d6be77d4c50a7ae22d6dd01 bugzilla: 185832 https://gitee.com/openeuler/kernel/issues/I4L9CF Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=79ff56c613c193744d6be77d4c50a7ae22d6dd01 -------------------------------- commit 570b1cac upstream. There are some duplicated codes to validate the block size in block drivers. This limitation actually comes from block layer, so this patch tries to add a new block layer helper for that. Signed-off-by: NXie Yongji <xieyongji@bytedance.com> Link: https://lore.kernel.org/r/20211026144015.188-2-xieyongji@bytedance.comSigned-off-by: NJens Axboe <axboe@kernel.dk> Signed-off-by: NTadeusz Struk <tadeusz.struk@linaro.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NChen Jun <chenjun102@huawei.com> Acked-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NChen Jun <chenjun102@huawei.com> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
-
由 Kees Cook 提交于
stable inclusion from stable-5.10.81 commit eaafc590053b314d4907017044ba2e739893c17c bugzilla: 185832 https://gitee.com/openeuler/kernel/issues/I4L9CF Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=eaafc590053b314d4907017044ba2e739893c17c -------------------------------- commit a52f8a59 upstream. Clang has never correctly compiled the FORTIFY_SOURCE defenses due to a couple bugs: Eliding inlines with matching __builtin_* names https://bugs.llvm.org/show_bug.cgi?id=50322 Incorrect __builtin_constant_p() of some globals https://bugs.llvm.org/show_bug.cgi?id=41459 In the process of making improvements to the FORTIFY_SOURCE defenses, the first (silent) bug (coincidentally) becomes worked around, but exposes the latter which breaks the build. As such, Clang must not be used with CONFIG_FORTIFY_SOURCE until at least latter bug is fixed (in Clang 13), and the fortify routines have been rearranged. Update the Kconfig to reflect the reality of the current situation. Signed-off-by: NKees Cook <keescook@chromium.org> Acked-by: NNick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/lkml/CAKwvOd=A+ueGV2ihdy5GtgR2fQbcXjjAtVxv3=cPjffpebZB7A@mail.gmail.com Cc: Nathan Chancellor <nathan@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NChen Jun <chenjun102@huawei.com> Acked-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NChen Jun <chenjun102@huawei.com> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
-
由 Dmitry Osipenko 提交于
stable inclusion from stable-5.10.80 commit 1e49a79bc312571093ba0dbd7f9df490c7afee22 bugzilla: 185821 https://gitee.com/openeuler/kernel/issues/I4L7CG Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=1e49a79bc312571093ba0dbd7f9df490c7afee22 -------------------------------- commit 19221e30 upstream. The tegra_powergate_power_up() has a typo in the error code path where it will try to disable clocks twice, fix it. In practice that error never happens, so this is a minor correction. Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30 Tested-by: Nicolas Chauvet <kwizart@gmail.com> # PAZ00 T20 and TK1 T124 Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30 Signed-off-by: NDmitry Osipenko <digetx@gmail.com> Signed-off-by: NThierry Reding <treding@nvidia.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NChen Jun <chenjun102@huawei.com> Reviewed-by: NWeilong Chen <chenweilong@huawei.com> Acked-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NChen Jun <chenjun102@huawei.com> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
-
由 Borislav Petkov 提交于
stable inclusion from stable-5.10.80 commit 45490bfa1ebb7dd8c7f9e77d72e5d006c1162219 bugzilla: 185821 https://gitee.com/openeuler/kernel/issues/I4L7CG Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=45490bfa1ebb7dd8c7f9e77d72e5d006c1162219 -------------------------------- commit 541ac971 upstream. The size of the exception stacks was increased by the commit in Fixes, resulting in stack sizes greater than a page in size. The #VC exception handling was only mapping the first (bottom) page, resulting in an SEV-ES guest failing to boot. Make the #VC exception stacks part of the default exception stacks storage and allocate them with a CONFIG_AMD_MEM_ENCRYPT=y .config. Map them only when a SEV-ES guest has been detected. Rip out the custom VC stacks mapping and storage code. [ bp: Steal and adapt Tom's commit message. ] Fixes: 7fae4c24 ("x86: Increase exception stack sizes") Signed-off-by: NBorislav Petkov <bp@suse.de> Tested-by: NTom Lendacky <thomas.lendacky@amd.com> Tested-by: NBrijesh Singh <brijesh.singh@amd.com> Link: https://lkml.kernel.org/r/YVt1IMjIs7pIZTRR@zn.tnicSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NChen Jun <chenjun102@huawei.com> Reviewed-by: NWeilong Chen <chenweilong@huawei.com> Acked-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NChen Jun <chenjun102@huawei.com> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
-
由 Tom Lendacky 提交于
stable inclusion from stable-5.10.80 commit fc25889a6617559aa1ba904d1c0873541d3c85bf bugzilla: 185821 https://gitee.com/openeuler/kernel/issues/I4L7CG Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=fc25889a6617559aa1ba904d1c0873541d3c85bf -------------------------------- commit aa5a4611 upstream. Introduce an x86 version of the cc_platform_has() function. This will be used to replace vendor specific calls like sme_active(), sev_active(), etc. Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com> Signed-off-by: NBorislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20210928191009.32551-4-bp@alien8.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NChen Jun <chenjun102@huawei.com> Reviewed-by: NWeilong Chen <chenweilong@huawei.com> Acked-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NChen Jun <chenjun102@huawei.com> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
-
由 Tom Lendacky 提交于
stable inclusion from stable-5.10.80 commit 74ba917cfdddbb6b1ad9c2fc4833bf1f810b27f9 bugzilla: 185821 https://gitee.com/openeuler/kernel/issues/I4L7CG Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=74ba917cfdddbb6b1ad9c2fc4833bf1f810b27f9 -------------------------------- commit 46b49b12 upstream. In preparation for other confidential computing technologies, introduce a generic helper function, cc_platform_has(), that can be used to check for specific active confidential computing attributes, like memory encryption. This is intended to eliminate having to add multiple technology-specific checks to the code (e.g. if (sev_active() || tdx_active() || ... ). [ bp: s/_CC_PLATFORM_H/_LINUX_CC_PLATFORM_H/g ] Co-developed-by: NAndi Kleen <ak@linux.intel.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com> Co-developed-by: NKuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: NKuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com> Signed-off-by: NBorislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20210928191009.32551-3-bp@alien8.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NChen Jun <chenjun102@huawei.com> Reviewed-by: NWeilong Chen <chenweilong@huawei.com> Acked-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NChen Jun <chenjun102@huawei.com> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
-
由 Andrii Nakryiko 提交于
stable inclusion from stable-5.10.80 commit 5be42b203f2c4b72205b4ecd72c0558dfdb3a552 bugzilla: 185821 https://gitee.com/openeuler/kernel/issues/I4L7CG Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=5be42b203f2c4b72205b4ecd72c0558dfdb3a552 -------------------------------- commit a20eac0a upstream. Previous fix aded bpf_clamp_umax() helper use to re-validate boundaries. While that works correctly, it introduces more branches, which blows up past 1 million instructions in no-alu32 variant of strobemeta selftests. Switching len variable from u32 to u64 also fixes the issue and reduces the number of validated instructions, so use that instead. Fix this patch and bpf_clamp_umax() removed, both alu32 and no-alu32 selftests pass. Fixes: 0133c204 ("selftests/bpf: Fix strobemeta selftest regression") Signed-off-by: NAndrii Nakryiko <andrii@kernel.org> Signed-off-by: NAlexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211101230118.1273019-1-andrii@kernel.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NChen Jun <chenjun102@huawei.com> Reviewed-by: NWeilong Chen <chenweilong@huawei.com> Acked-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NChen Jun <chenjun102@huawei.com> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
-
由 Colin Ian King 提交于
stable inclusion from stable-5.10.80 commit 1e7340950dc22687e5f7741a1dcf1a2d3fee062a bugzilla: 185821 https://gitee.com/openeuler/kernel/issues/I4L7CG Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=1e7340950dc22687e5f7741a1dcf1a2d3fee062a -------------------------------- commit 0eab756f upstream. There are several error return paths that dereference the null pointer host because the pointer has not yet been set to a valid value. Fix this by adding a new out_mmc label and exiting via this label to avoid the host clean up and hence the null pointer dereference. Addresses-Coverity: ("Explicit null dereference") Fixes: 8105c2ab ("mmc: moxart: Fix reference count leaks in moxart_probe") Signed-off-by: NColin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20211013100052.125461-1-colin.king@canonical.comSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NChen Jun <chenjun102@huawei.com> Reviewed-by: NWeilong Chen <chenweilong@huawei.com> Acked-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NChen Jun <chenjun102@huawei.com> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
-
由 Arnd Bergmann 提交于
stable inclusion from stable-5.10.80 commit 188bf40391a5a296e91d40c6f83bd4f07a0a8559 bugzilla: 185821 https://gitee.com/openeuler/kernel/issues/I4L7CG Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=188bf40391a5a296e91d40c6f83bd4f07a0a8559 -------------------------------- commit 937e79c6 upstream. Using a kernel pointer in place of a dma_addr_t token can lead to undefined behavior if that makes it into cache management functions. The compiler caught one such attempt in a cast: drivers/net/wireless/ath/ath10k/mac.c: In function 'ath10k_add_interface': drivers/net/wireless/ath/ath10k/mac.c:5586:47: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] 5586 | arvif->beacon_paddr = (dma_addr_t)arvif->beacon_buf; | ^ Looking through how this gets used down the way, I'm fairly sure that beacon_paddr is never accessed again for ATH10K_DEV_TYPE_HL devices, and if it was accessed, that would be a bug. Change the assignment to use a known-invalid address token instead, which avoids the warning and makes it easier to catch bugs if it does end up getting used. Fixes: e263bdab ("ath10k: high latency fixes for beacon buffer") Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NKalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211014075153.3655910-1-arnd@kernel.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NChen Jun <chenjun102@huawei.com> Reviewed-by: NWeilong Chen <chenweilong@huawei.com> Acked-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NChen Jun <chenjun102@huawei.com> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
-
由 Trond Myklebust 提交于
stable inclusion from stable-5.10.80 commit d41f4d4dd7c8fc045859258abdc3fb453ab8c790 bugzilla: 185821 https://gitee.com/openeuler/kernel/issues/I4L7CG Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=d41f4d4dd7c8fc045859258abdc3fb453ab8c790 -------------------------------- commit ea7a1019 upstream. The premise of commit 6f9f1728 ("SUNRPC: Mitigate cond_resched() in xprt_transmit()") was that cond_resched() is expensive and unnecessary when there has been just a single send. The point of cond_resched() is to ensure that tasks that should pre-empt this one get a chance to do so when it is safe to do so. The code prior to commit 6f9f1728 failed to take into account that it was keeping a rpc_task pinned for longer than it needed to, and so rather than doing a full revert, let's just move the cond_resched. Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NChen Jun <chenjun102@huawei.com> Reviewed-by: NWeilong Chen <chenweilong@huawei.com> Acked-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NChen Jun <chenjun102@huawei.com> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
-
由 Pali Rohár 提交于
stable inclusion from stable-5.10.80 commit c7a440cd30798042f3346cbb3b3a056df638f66c bugzilla: 185821 https://gitee.com/openeuler/kernel/issues/I4L7CG Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=c7a440cd30798042f3346cbb3b3a056df638f66c -------------------------------- commit a4e17d65 upstream. Change PCIe Max Payload Size setting in PCIe Device Control register to 512 bytes to align with PCIe Link Initialization sequence as defined in Marvell Armada 3700 Functional Specification. According to the specification, maximal Max Payload Size supported by this device is 512 bytes. Without this kernel prints suspicious line: pci 0000:01:00.0: Upstream bridge's Max Payload Size set to 256 (was 16384, max 512) With this change it changes to: pci 0000:01:00.0: Upstream bridge's Max Payload Size set to 256 (was 512, max 512) Link: https://lore.kernel.org/r/20211005180952.6812-3-kabel@kernel.org Fixes: 8c39d710 ("PCI: aardvark: Add Aardvark PCI host controller driver") Signed-off-by: NPali Rohár <pali@kernel.org> Signed-off-by: NMarek Behún <kabel@kernel.org> Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: NMarek Behún <kabel@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NChen Jun <chenjun102@huawei.com> Reviewed-by: NWeilong Chen <chenweilong@huawei.com> Acked-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NChen Jun <chenjun102@huawei.com> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
-
由 Pali Rohár 提交于
stable inclusion from stable-5.10.80 commit f967d120a5b51b8bda9e2ad030726f12925fd709 bugzilla: 185821 https://gitee.com/openeuler/kernel/issues/I4L7CG Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=f967d120a5b51b8bda9e2ad030726f12925fd709 -------------------------------- commit 460275f1 upstream. Define a macro PCI_EXP_DEVCTL_PAYLOAD_* for every possible Max Payload Size in linux/pci_regs.h, in the same style as PCI_EXP_DEVCTL_READRQ_*. Link: https://lore.kernel.org/r/20211005180952.6812-2-kabel@kernel.orgSigned-off-by: NPali Rohár <pali@kernel.org> Signed-off-by: NMarek Behún <kabel@kernel.org> Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: NMarek Behún <kabel@kernel.org> Reviewed-by: NBjorn Helgaas <bhelgaas@google.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NChen Jun <chenjun102@huawei.com> Reviewed-by: NWeilong Chen <chenweilong@huawei.com> Acked-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NChen Jun <chenjun102@huawei.com> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
-
由 Jernej Skrabec 提交于
stable inclusion from stable-5.10.80 commit f3396f6d8345821578fafc953888df1b1df6d780 bugzilla: 185821 https://gitee.com/openeuler/kernel/issues/I4L7CG Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=f3396f6d8345821578fafc953888df1b1df6d780 -------------------------------- commit c302c98d upstream. Macros SUN8I_CSC_CTRL() and SUN8I_CSC_COEFF() don't follow usual recommendation of having arguments enclosed in parenthesis. While that didn't change anything for quite sometime, it actually become important after CSC code rework with commit ea067aee ("drm/sun4i: de2/de3: Remove redundant CSC matrices"). Without this fix, colours are completely off for supported YVU formats on SoCs with DE2 (A64, H3, R40, etc.). Fix the issue by enclosing macro arguments in parenthesis. Cc: stable@vger.kernel.org # 5.12+ Fixes: 88302939 ("drm/sun4i: Add DE2 CSC library") Reported-by: NRoman Stratiienko <r.stratiienko@gmail.com> Signed-off-by: NJernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: NChen-Yu Tsai <wens@csie.org> Signed-off-by: NMaxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210831184819.93670-1-jernej.skrabec@gmail.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NChen Jun <chenjun102@huawei.com> Reviewed-by: NWeilong Chen <chenweilong@huawei.com> Acked-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NChen Jun <chenjun102@huawei.com> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
-
由 Xiaoming Ni 提交于
stable inclusion from stable-5.10.80 commit 1023355234ca441c7296a58e762b420eef88884e bugzilla: 185821 https://gitee.com/openeuler/kernel/issues/I4L7CG Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=1023355234ca441c7296a58e762b420eef88884e -------------------------------- commit c45361ab upstream. When CONFIG_SMP=y, timebase synchronization is required when the second kernel is started. arch/powerpc/kernel/smp.c: int __cpu_up(unsigned int cpu, struct task_struct *tidle) { ... if (smp_ops->give_timebase) smp_ops->give_timebase(); ... } void start_secondary(void *unused) { ... if (smp_ops->take_timebase) smp_ops->take_timebase(); ... } When CONFIG_HOTPLUG_CPU=n and CONFIG_KEXEC_CORE=n, smp_85xx_ops.give_timebase is NULL, smp_85xx_ops.take_timebase is NULL, As a result, the timebase is not synchronized. Timebase synchronization does not depend on CONFIG_HOTPLUG_CPU. Fixes: 56f1ba28 ("powerpc/mpc85xx: refactor the PM operations") Cc: stable@vger.kernel.org # v4.6+ Signed-off-by: NXiaoming Ni <nixiaoming@huawei.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210929033646.39630-3-nixiaoming@huawei.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NChen Jun <chenjun102@huawei.com> Reviewed-by: NWeilong Chen <chenweilong@huawei.com> Acked-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NChen Jun <chenjun102@huawei.com> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
-
由 Vasant Hegde 提交于
stable inclusion from stable-5.10.80 commit 77d543e687952581e81fe07fe17b7bafa7773f5c bugzilla: 185821 https://gitee.com/openeuler/kernel/issues/I4L7CG Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=77d543e687952581e81fe07fe17b7bafa7773f5c -------------------------------- commit 52862ab3 upstream. Commit 587164cd, introduced new opal message type (OPAL_MSG_PRD2) and added opal notifier. But I missed to unregister the notifier during module unload path. This results in below call trace if you try to unload and load opal_prd module. Also add new notifier_block for OPAL_MSG_PRD2 message. Sample calltrace (modprobe -r opal_prd; modprobe opal_prd) BUG: Unable to handle kernel data access on read at 0xc0080000192200e0 Faulting instruction address: 0xc00000000018d1cc Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV CPU: 66 PID: 7446 Comm: modprobe Kdump: loaded Tainted: G E 5.14.0prd #759 NIP: c00000000018d1cc LR: c00000000018d2a8 CTR: c0000000000cde10 REGS: c0000003c4c0f0a0 TRAP: 0300 Tainted: G E (5.14.0prd) MSR: 9000000002009033 <SF,HV,VEC,EE,ME,IR,DR,RI,LE> CR: 24224824 XER: 20040000 CFAR: c00000000018d2a4 DAR: c0080000192200e0 DSISR: 40000000 IRQMASK: 1 ... NIP notifier_chain_register+0x2c/0xc0 LR atomic_notifier_chain_register+0x48/0x80 Call Trace: 0xc000000002090610 (unreliable) atomic_notifier_chain_register+0x58/0x80 opal_message_notifier_register+0x7c/0x1e0 opal_prd_probe+0x84/0x150 [opal_prd] platform_probe+0x78/0x130 really_probe+0x110/0x5d0 __driver_probe_device+0x17c/0x230 driver_probe_device+0x60/0x130 __driver_attach+0xfc/0x220 bus_for_each_dev+0xa8/0x130 driver_attach+0x34/0x50 bus_add_driver+0x1b0/0x300 driver_register+0x98/0x1a0 __platform_driver_register+0x38/0x50 opal_prd_driver_init+0x34/0x50 [opal_prd] do_one_initcall+0x60/0x2d0 do_init_module+0x7c/0x320 load_module+0x3394/0x3650 __do_sys_finit_module+0xd4/0x160 system_call_exception+0x140/0x290 system_call_common+0xf4/0x258 Fixes: 587164cd ("powerpc/powernv: Add new opal message type") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: NVasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211028165716.41300-1-hegdevasant@linux.vnet.ibm.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NChen Jun <chenjun102@huawei.com> Reviewed-by: NWeilong Chen <chenweilong@huawei.com> Acked-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NChen Jun <chenjun102@huawei.com> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
-
由 Miquel Raynal 提交于
stable inclusion from stable-5.10.80 commit 9dcdadd6cc73525e038b9621a6e9ee814dd63bda bugzilla: 185821 https://gitee.com/openeuler/kernel/issues/I4L7CG Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=9dcdadd6cc73525e038b9621a6e9ee814dd63bda -------------------------------- commit 7e3cdba1 upstream. Following the introduction of the generic ECC engine infrastructure, it was necessary to reorganize the code and move the ECC configuration in the ->attach_chip() hook. Failing to do that properly lead to a first series of fixes supposed to stabilize the situation. Unfortunately, this only fixed the use of software ECC engines, preventing any other kind of engine to be used, including on-die ones. It is now time to (finally) fix the situation by ensuring that we still provide a default (eg. software ECC) but will still support different ECC engines such as on-die ECC engines if properly described in the device tree. There are no changes needed on the core side in order to do this, but we just need to leverage the logic there which allows: 1- a subsystem default (set to Host engines in the raw NAND world) 2- a driver specific default (here set to software ECC engines) 3- any type of engine requested by the user (ie. described in the DT) As the raw NAND subsystem has not yet been fully converted to the ECC engine infrastructure, in order to provide a default ECC engine for this driver we need to set chip->ecc.engine_type *before* calling nand_scan(). During the initialization step, the core will consider this entry as the default engine for this driver. This value may of course be overloaded by the user if the usual DT properties are provided. Fixes: dbffc8cc ("mtd: rawnand: au1550: Move the ECC initialization to ->attach_chip()") Cc: stable@vger.kernel.org Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210928222258.199726-3-miquel.raynal@bootlin.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NChen Jun <chenjun102@huawei.com> Reviewed-by: NWeilong Chen <chenweilong@huawei.com> Acked-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NChen Jun <chenjun102@huawei.com> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
-
由 Miquel Raynal 提交于
stable inclusion from stable-5.10.80 commit 51e34fcf72a39fb02d9ad287716d3f0cdff5f1ce bugzilla: 185821 https://gitee.com/openeuler/kernel/issues/I4L7CG Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=51e34fcf72a39fb02d9ad287716d3f0cdff5f1ce -------------------------------- commit 325fd539 upstream. Following the introduction of the generic ECC engine infrastructure, it was necessary to reorganize the code and move the ECC configuration in the ->attach_chip() hook. Failing to do that properly lead to a first series of fixes supposed to stabilize the situation. Unfortunately, this only fixed the use of software ECC engines, preventing any other kind of engine to be used, including on-die ones. It is now time to (finally) fix the situation by ensuring that we still provide a default (eg. software ECC) but will still support different ECC engines such as on-die ECC engines if properly described in the device tree. There are no changes needed on the core side in order to do this, but we just need to leverage the logic there which allows: 1- a subsystem default (set to Host engines in the raw NAND world) 2- a driver specific default (here set to software ECC engines) 3- any type of engine requested by the user (ie. described in the DT) As the raw NAND subsystem has not yet been fully converted to the ECC engine infrastructure, in order to provide a default ECC engine for this driver we need to set chip->ecc.engine_type *before* calling nand_scan(). During the initialization step, the core will consider this entry as the default engine for this driver. This value may of course be overloaded by the user if the usual DT properties are provided. Fixes: 612e048e ("mtd: rawnand: plat_nand: Move the ECC initialization to ->attach_chip()") Cc: stable@vger.kernel.org Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210928222258.199726-8-miquel.raynal@bootlin.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NChen Jun <chenjun102@huawei.com> Reviewed-by: NWeilong Chen <chenweilong@huawei.com> Acked-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NChen Jun <chenjun102@huawei.com> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
-
由 Miquel Raynal 提交于
stable inclusion from stable-5.10.80 commit e1de04df8eb11087f8bd15e1d58e99dc25f82874 bugzilla: 185821 https://gitee.com/openeuler/kernel/issues/I4L7CG Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=e1de04df8eb11087f8bd15e1d58e99dc25f82874 -------------------------------- commit 194ac63d upstream. Following the introduction of the generic ECC engine infrastructure, it was necessary to reorganize the code and move the ECC configuration in the ->attach_chip() hook. Failing to do that properly lead to a first series of fixes supposed to stabilize the situation. Unfortunately, this only fixed the use of software ECC engines, preventing any other kind of engine to be used, including on-die ones. It is now time to (finally) fix the situation by ensuring that we still provide a default (eg. software ECC) but will still support different ECC engines such as on-die ECC engines if properly described in the device tree. There are no changes needed on the core side in order to do this, but we just need to leverage the logic there which allows: 1- a subsystem default (set to Host engines in the raw NAND world) 2- a driver specific default (here set to software ECC engines) 3- any type of engine requested by the user (ie. described in the DT) As the raw NAND subsystem has not yet been fully converted to the ECC engine infrastructure, in order to provide a default ECC engine for this driver we need to set chip->ecc.engine_type *before* calling nand_scan(). During the initialization step, the core will consider this entry as the default engine for this driver. This value may of course be overloaded by the user if the usual DT properties are provided. Fixes: 553508ce ("mtd: rawnand: orion: Move the ECC initialization to ->attach_chip()") Cc: stable@vger.kernel.org Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210928222258.199726-6-miquel.raynal@bootlin.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NChen Jun <chenjun102@huawei.com> Reviewed-by: NWeilong Chen <chenweilong@huawei.com> Acked-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NChen Jun <chenjun102@huawei.com> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
-
由 Miquel Raynal 提交于
stable inclusion from stable-5.10.80 commit b4e2e9fbd1949bca187acfa06bf4ea1f81658fff bugzilla: 185821 https://gitee.com/openeuler/kernel/issues/I4L7CG Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=b4e2e9fbd1949bca187acfa06bf4ea1f81658fff -------------------------------- commit f16b7d2a upstream. Following the introduction of the generic ECC engine infrastructure, it was necessary to reorganize the code and move the ECC configuration in the ->attach_chip() hook. Failing to do that properly lead to a first series of fixes supposed to stabilize the situation. Unfortunately, this only fixed the use of software ECC engines, preventing any other kind of engine to be used, including on-die ones. It is now time to (finally) fix the situation by ensuring that we still provide a default (eg. software ECC) but will still support different ECC engines such as on-die ECC engines if properly described in the device tree. There are no changes needed on the core side in order to do this, but we just need to leverage the logic there which allows: 1- a subsystem default (set to Host engines in the raw NAND world) 2- a driver specific default (here set to software ECC engines) 3- any type of engine requested by the user (ie. described in the DT) As the raw NAND subsystem has not yet been fully converted to the ECC engine infrastructure, in order to provide a default ECC engine for this driver we need to set chip->ecc.engine_type *before* calling nand_scan(). During the initialization step, the core will consider this entry as the default engine for this driver. This value may of course be overloaded by the user if the usual DT properties are provided. Fixes: 8fc6f1f0 ("mtd: rawnand: pasemi: Move the ECC initialization to ->attach_chip()") Cc: stable@vger.kernel.org Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210928222258.199726-7-miquel.raynal@bootlin.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NChen Jun <chenjun102@huawei.com> Reviewed-by: NWeilong Chen <chenweilong@huawei.com> Acked-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NChen Jun <chenjun102@huawei.com> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
-
由 Miquel Raynal 提交于
stable inclusion from stable-5.10.80 commit 963db3ccc15bbb23cf4218cf377f258b76844a2c bugzilla: 185821 https://gitee.com/openeuler/kernel/issues/I4L7CG Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=963db3ccc15bbb23cf4218cf377f258b76844a2c -------------------------------- commit b5b5b4dc upstream. Following the introduction of the generic ECC engine infrastructure, it was necessary to reorganize the code and move the ECC configuration in the ->attach_chip() hook. Failing to do that properly lead to a first series of fixes supposed to stabilize the situation. Unfortunately, this only fixed the use of software ECC engines, preventing any other kind of engine to be used, including on-die ones. It is now time to (finally) fix the situation by ensuring that we still provide a default (eg. software ECC) but will still support different ECC engines such as on-die ECC engines if properly described in the device tree. There are no changes needed on the core side in order to do this, but we just need to leverage the logic there which allows: 1- a subsystem default (set to Host engines in the raw NAND world) 2- a driver specific default (here set to software ECC engines) 3- any type of engine requested by the user (ie. described in the DT) As the raw NAND subsystem has not yet been fully converted to the ECC engine infrastructure, in order to provide a default ECC engine for this driver we need to set chip->ecc.engine_type *before* calling nand_scan(). During the initialization step, the core will consider this entry as the default engine for this driver. This value may of course be overloaded by the user if the usual DT properties are provided. Fixes: f6341f64 ("mtd: rawnand: gpio: Move the ECC initialization to ->attach_chip()") Cc: stable@vger.kernel.org Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210928222258.199726-4-miquel.raynal@bootlin.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NChen Jun <chenjun102@huawei.com> Reviewed-by: NWeilong Chen <chenweilong@huawei.com> Acked-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NChen Jun <chenjun102@huawei.com> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
-
由 Miquel Raynal 提交于
stable inclusion from stable-5.10.80 commit 13566bc111ee900a7c64733b526ca318d52d1e63 bugzilla: 185821 https://gitee.com/openeuler/kernel/issues/I4L7CG Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=13566bc111ee900a7c64733b526ca318d52d1e63 -------------------------------- commit f9d8570b upstream. Following the introduction of the generic ECC engine infrastructure, it was necessary to reorganize the code and move the ECC configuration in the ->attach_chip() hook. Failing to do that properly lead to a first series of fixes supposed to stabilize the situation. Unfortunately, this only fixed the use of software ECC engines, preventing any other kind of engine to be used, including on-die ones. It is now time to (finally) fix the situation by ensuring that we still provide a default (eg. software ECC) but will still support different ECC engines such as on-die ECC engines if properly described in the device tree. There are no changes needed on the core side in order to do this, but we just need to leverage the logic there which allows: 1- a subsystem default (set to Host engines in the raw NAND world) 2- a driver specific default (here set to software ECC engines) 3- any type of engine requested by the user (ie. described in the DT) As the raw NAND subsystem has not yet been fully converted to the ECC engine infrastructure, in order to provide a default ECC engine for this driver we need to set chip->ecc.engine_type *before* calling nand_scan(). During the initialization step, the core will consider this entry as the default engine for this driver. This value may of course be overloaded by the user if the usual DT properties are provided. Fixes: 6dd09f77 ("mtd: rawnand: mpc5121: Move the ECC initialization to ->attach_chip()") Cc: stable@vger.kernel.org Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210928222258.199726-5-miquel.raynal@bootlin.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NChen Jun <chenjun102@huawei.com> Reviewed-by: NWeilong Chen <chenweilong@huawei.com> Acked-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NChen Jun <chenjun102@huawei.com> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
-
由 Miquel Raynal 提交于
stable inclusion from stable-5.10.80 commit 9b366f5221d8aa64b22f35be137a5749326444ce bugzilla: 185821 https://gitee.com/openeuler/kernel/issues/I4L7CG Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=9b366f5221d8aa64b22f35be137a5749326444ce -------------------------------- commit 6bcd2960 upstream. Following the introduction of the generic ECC engine infrastructure, it was necessary to reorganize the code and move the ECC configuration in the ->attach_chip() hook. Failing to do that properly lead to a first series of fixes supposed to stabilize the situation. Unfortunately, this only fixed the use of software ECC engines, preventing any other kind of engine to be used, including on-die ones. It is now time to (finally) fix the situation by ensuring that we still provide a default (eg. software ECC) but will still support different ECC engines such as on-die ECC engines if properly described in the device tree. There are no changes needed on the core side in order to do this, but we just need to leverage the logic there which allows: 1- a subsystem default (set to Host engines in the raw NAND world) 2- a driver specific default (here set to software ECC engines) 3- any type of engine requested by the user (ie. described in the DT) As the raw NAND subsystem has not yet been fully converted to the ECC engine infrastructure, in order to provide a default ECC engine for this driver we need to set chip->ecc.engine_type *before* calling nand_scan(). During the initialization step, the core will consider this entry as the default engine for this driver. This value may of course be overloaded by the user if the usual DT properties are provided. Fixes: d525914b ("mtd: rawnand: xway: Move the ECC initialization to ->attach_chip()") Cc: stable@vger.kernel.org Cc: Jan Hoffmann <jan@3e8.eu> Cc: Kestrel seventyfour <kestrelseventyfour@gmail.com> Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com> Tested-by: NJan Hoffmann <jan@3e8.eu> Link: https://lore.kernel.org/linux-mtd/20210928222258.199726-10-miquel.raynal@bootlin.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NChen Jun <chenjun102@huawei.com> Reviewed-by: NWeilong Chen <chenweilong@huawei.com> Acked-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NChen Jun <chenjun102@huawei.com> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
-
由 Miquel Raynal 提交于
stable inclusion from stable-5.10.80 commit cbc55cf4a35867c158b03dd09fa9001c528a8d85 bugzilla: 185821 https://gitee.com/openeuler/kernel/issues/I4L7CG Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=cbc55cf4a35867c158b03dd09fa9001c528a8d85 -------------------------------- commit d707bb74 upstream. Following the introduction of the generic ECC engine infrastructure, it was necessary to reorganize the code and move the ECC configuration in the ->attach_chip() hook. Failing to do that properly lead to a first series of fixes supposed to stabilize the situation. Unfortunately, this only fixed the use of software ECC engines, preventing any other kind of engine to be used, including on-die ones. It is now time to (finally) fix the situation by ensuring that we still provide a default (eg. software ECC) but will still support different ECC engines such as on-die ECC engines if properly described in the device tree. There are no changes needed on the core side in order to do this, but we just need to leverage the logic there which allows: 1- a subsystem default (set to Host engines in the raw NAND world) 2- a driver specific default (here set to software ECC engines) 3- any type of engine requested by the user (ie. described in the DT) As the raw NAND subsystem has not yet been fully converted to the ECC engine infrastructure, in order to provide a default ECC engine for this driver we need to set chip->ecc.engine_type *before* calling nand_scan(). During the initialization step, the core will consider this entry as the default engine for this driver. This value may of course be overloaded by the user if the usual DT properties are provided. Fixes: 59d93473 ("mtd: rawnand: ams-delta: Move the ECC initialization to ->attach_chip()") Cc: stable@vger.kernel.org Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210928222258.199726-2-miquel.raynal@bootlin.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NChen Jun <chenjun102@huawei.com> Reviewed-by: NWeilong Chen <chenweilong@huawei.com> Acked-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NChen Jun <chenjun102@huawei.com> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
-
由 Halil Pasic 提交于
stable inclusion from stable-5.10.80 commit 1f420818dfca148afbb87abd556357c7a142ebb2 bugzilla: 185821 https://gitee.com/openeuler/kernel/issues/I4L7CG Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=1f420818dfca148afbb87abd556357c7a142ebb2 -------------------------------- commit ad9a1451 upstream. Since commit 48720ba5 ("virtio/s390: use DMA memory for ccw I/O and classic notifiers") we were supposed to make sure that virtio_ccw_release_dev() completes before the ccw device and the attached dma pool are torn down, but unfortunately we did not. Before that commit it used to be OK to delay cleaning up the memory allocated by virtio-ccw indefinitely (which isn't really intuitive for guys used to destruction happens in reverse construction order), but now we trigger a BUG_ON if the genpool is destroyed before all memory allocated from it is deallocated. Which brings down the guest. We can observe this problem, when unregister_virtio_device() does not give up the last reference to the virtio_device (e.g. because a virtio-scsi attached scsi disk got removed without previously unmounting its previously mounted partition). To make sure that the genpool is only destroyed after all the necessary freeing is done let us take a reference on the ccw device on each ccw_device_dma_zalloc() and give it up on each ccw_device_dma_free(). Actually there are multiple approaches to fixing the problem at hand that can work. The upside of this one is that it is the safest one while remaining simple. We don't crash the guest even if the driver does not pair allocations and frees. The downside is the reference counting overhead, that the reference counting for ccw devices becomes more complex, in a sense that we need to pair the calls to the aforementioned functions for it to be correct, and that if we happen to leak, we leak more than necessary (the whole ccw device instead of just the genpool). Some alternatives to this approach are taking a reference in virtio_ccw_online() and giving it up in virtio_ccw_release_dev() or making sure virtio_ccw_release_dev() completes its work before virtio_ccw_remove() returns. The downside of these approaches is that these are less safe against programming errors. Cc: <stable@vger.kernel.org> # v5.3 Signed-off-by: NHalil Pasic <pasic@linux.ibm.com> Fixes: 48720ba5 ("virtio/s390: use DMA memory for ccw I/O and classic notifiers") Reported-by: bfu@redhat.com Reviewed-by: NVineeth Vijayan <vneethv@linux.ibm.com> Acked-by: NCornelia Huck <cohuck@redhat.com> Signed-off-by: NVasily Gorbik <gor@linux.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NChen Jun <chenjun102@huawei.com> Reviewed-by: NWeilong Chen <chenweilong@huawei.com> Acked-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NChen Jun <chenjun102@huawei.com> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
-
由 Harald Freudenberger 提交于
stable inclusion from stable-5.10.80 commit c9ca9669dec322335da6f6ce0c6da7c48391f032 bugzilla: 185821 https://gitee.com/openeuler/kernel/issues/I4L7CG Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=c9ca9669dec322335da6f6ce0c6da7c48391f032 -------------------------------- commit 3826350e upstream. When a queue is switched to soft offline during heavy load and later switched to soft online again and now used, it may be that the caller is blocked forever in the ioctl call. The failure occurs because there is a pending reply after the queue(s) have been switched to offline. This orphaned reply is received when the queue is switched to online and is accidentally counted for the outstanding replies. So when there was a valid outstanding reply and this orphaned reply is received it counts as the outstanding one thus dropping the outstanding counter to 0. Voila, with this counter the receive function is not called any more and the real outstanding reply is never received (until another request comes in...) and the ioctl blocks. The fix is simple. However, instead of readjusting the counter when an orphaned reply is detected, I check the queue status for not empty and compare this to the outstanding counter. So if the queue is not empty then the counter must not drop to 0 but at least have a value of 1. Signed-off-by: NHarald Freudenberger <freude@linux.ibm.com> Cc: stable@vger.kernel.org Signed-off-by: NVasily Gorbik <gor@linux.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NChen Jun <chenjun102@huawei.com> Reviewed-by: NWeilong Chen <chenweilong@huawei.com> Acked-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NChen Jun <chenjun102@huawei.com> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
-
由 Sven Schnelle 提交于
stable inclusion from stable-5.10.80 commit 57de1fbecff0bfe56d6db4af2b51741596968600 bugzilla: 185821 https://gitee.com/openeuler/kernel/issues/I4L7CG Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=57de1fbecff0bfe56d6db4af2b51741596968600 -------------------------------- commit 213fca9e upstream. commit 9c6c273a ("timer: Remove init_timer_on_stack() in favor of timer_setup_on_stack()") changed the timer setup from init_timer_on_stack(() to timer_setup(), but missed to change the mod_timer() call. And while at it, use msecs_to_jiffies() instead of the open coded timeout calculation. Cc: stable@vger.kernel.org Fixes: 9c6c273a ("timer: Remove init_timer_on_stack() in favor of timer_setup_on_stack()") Signed-off-by: NSven Schnelle <svens@linux.ibm.com> Reviewed-by: NVasily Gorbik <gor@linux.ibm.com> Signed-off-by: NVasily Gorbik <gor@linux.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NChen Jun <chenjun102@huawei.com> Reviewed-by: NWeilong Chen <chenweilong@huawei.com> Acked-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NChen Jun <chenjun102@huawei.com> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
-
由 Vineeth Vijayan 提交于
stable inclusion from stable-5.10.80 commit 1174298a5b31ba566a4dee424230c10673014ea7 bugzilla: 185821 https://gitee.com/openeuler/kernel/issues/I4L7CG Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=1174298a5b31ba566a4dee424230c10673014ea7 -------------------------------- commit a4751f15 upstream. Check the validity of subchanel before reading other fields in the schib. Fixes: d3683c05 ("s390/cio: add dev_busid sysfs entry for each subchannel") CC: <stable@vger.kernel.org> Reported-by: NCornelia Huck <cohuck@redhat.com> Signed-off-by: NVineeth Vijayan <vneethv@linux.ibm.com> Reviewed-by: NCornelia Huck <cohuck@redhat.com> Link: https://lore.kernel.org/r/20211105154451.847288-1-vneethv@linux.ibm.comSigned-off-by: NVasily Gorbik <gor@linux.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NChen Jun <chenjun102@huawei.com> Reviewed-by: NWeilong Chen <chenweilong@huawei.com> Acked-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NChen Jun <chenjun102@huawei.com> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
-
由 Marek Vasut 提交于
stable inclusion from stable-5.10.80 commit 7d0341b37d9763a6e7e1a3b7464d115839e30246 bugzilla: 185821 https://gitee.com/openeuler/kernel/issues/I4L7CG Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=7d0341b37d9763a6e7e1a3b7464d115839e30246 -------------------------------- commit 33a5471f upstream. The note in c2adda27 ("video: backlight: Add of_find_backlight helper in backlight.c") says that gpio-backlight uses brightness as power state. This has been fixed since in ec665b75 ("backlight: gpio-backlight: Correct initial power state handling") and other backlight drivers do not require this workaround. Drop the workaround. This fixes the case where e.g. pwm-backlight can perfectly well be set to brightness 0 on boot in DT, which without this patch leads to the display brightness to be max instead of off. Fixes: c2adda27 ("video: backlight: Add of_find_backlight helper in backlight.c") Cc: <stable@vger.kernel.org> # 5.4+ Cc: <stable@vger.kernel.org> # 4.19.x: ec665b75: backlight: gpio-backlight: Correct initial power state handling Signed-off-by: NMarek Vasut <marex@denx.de> Acked-by: NNoralf Trønnes <noralf@tronnes.org> Reviewed-by: NDaniel Thompson <daniel.thompson@linaro.org> Signed-off-by: NLee Jones <lee.jones@linaro.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NChen Jun <chenjun102@huawei.com> Reviewed-by: NWeilong Chen <chenweilong@huawei.com> Acked-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NChen Jun <chenjun102@huawei.com> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
-
由 Jack Andersen 提交于
stable inclusion from stable-5.10.80 commit 332306b1e731bde88fa748690450603265ab0637 bugzilla: 185821 https://gitee.com/openeuler/kernel/issues/I4L7CG Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=332306b1e731bde88fa748690450603265ab0637 -------------------------------- commit 313c84b5 upstream. This patch extends the DLN2 driver; adding cell for adc_dln2 module. The original patch[1] fell through the cracks when the driver was added so ADC has never actually been usable. That patch did not have ACPI support which was added in v5.9, so the oldest supported version this current patch can be backported to is 5.10. [1] https://www.spinics.net/lists/linux-iio/msg33975.html Cc: <stable@vger.kernel.org> # 5.10+ Signed-off-by: NJack Andersen <jackoalan@gmail.com> Signed-off-by: NNoralf Trønnes <noralf@tronnes.org> Signed-off-by: NLee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20211018112541.25466-1-noralf@tronnes.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NChen Jun <chenjun102@huawei.com> Reviewed-by: NWeilong Chen <chenweilong@huawei.com> Acked-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NChen Jun <chenjun102@huawei.com> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
-
由 Michal Hocko 提交于
stable inclusion from stable-5.10.80 commit 1d457987366f7a92d03e03df80f9a63040133233 bugzilla: 185821 https://gitee.com/openeuler/kernel/issues/I4L7CG Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=1d457987366f7a92d03e03df80f9a63040133233 -------------------------------- commit 60e2793d upstream. Any allocation failure during the #PF path will return with VM_FAULT_OOM which in turn results in pagefault_out_of_memory. This can happen for 2 different reasons. a) Memcg is out of memory and we rely on mem_cgroup_oom_synchronize to perform the memcg OOM handling or b) normal allocation fails. The latter is quite problematic because allocation paths already trigger out_of_memory and the page allocator tries really hard to not fail allocations. Anyway, if the OOM killer has been already invoked there is no reason to invoke it again from the #PF path. Especially when the OOM condition might be gone by that time and we have no way to find out other than allocate. Moreover if the allocation failed and the OOM killer hasn't been invoked then we are unlikely to do the right thing from the #PF context because we have already lost the allocation context and restictions and therefore might oom kill a task from a different NUMA domain. This all suggests that there is no legitimate reason to trigger out_of_memory from pagefault_out_of_memory so drop it. Just to be sure that no #PF path returns with VM_FAULT_OOM without allocation print a warning that this is happening before we restart the #PF. [VvS: #PF allocation can hit into limit of cgroup v1 kmem controller. This is a local problem related to memcg, however, it causes unnecessary global OOM kills that are repeated over and over again and escalate into a real disaster. This has been broken since kmem accounting has been introduced for cgroup v1 (3.8). There was no kmem specific reclaim for the separate limit so the only way to handle kmem hard limit was to return with ENOMEM. In upstream the problem will be fixed by removing the outdated kmem limit, however stable and LTS kernels cannot do it and are still affected. This patch fixes the problem and should be backported into stable/LTS.] Link: https://lkml.kernel.org/r/f5fd8dd8-0ad4-c524-5f65-920b01972a42@virtuozzo.comSigned-off-by: NMichal Hocko <mhocko@suse.com> Signed-off-by: NVasily Averin <vvs@virtuozzo.com> Acked-by: NMichal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: Uladzislau Rezki <urezki@gmail.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NChen Jun <chenjun102@huawei.com> Reviewed-by: NWeilong Chen <chenweilong@huawei.com> Acked-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NChen Jun <chenjun102@huawei.com> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
-
由 Vasily Averin 提交于
stable inclusion from stable-5.10.80 commit ac7f6befc3d1a58728ce3b93546aa24967ad90e7 bugzilla: 185821 https://gitee.com/openeuler/kernel/issues/I4L7CG Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=ac7f6befc3d1a58728ce3b93546aa24967ad90e7 -------------------------------- commit 0b28179a upstream. Patch series "memcg: prohibit unconditional exceeding the limit of dying tasks", v3. Memory cgroup charging allows killed or exiting tasks to exceed the hard limit. It can be misused and allowed to trigger global OOM from inside a memcg-limited container. On the other hand if memcg fails allocation, called from inside #PF handler it triggers global OOM from inside pagefault_out_of_memory(). To prevent these problems this patchset: (a) removes execution of out_of_memory() from pagefault_out_of_memory(), becasue nobody can explain why it is necessary. (b) allow memcg to fail allocation of dying/killed tasks. This patch (of 3): Any allocation failure during the #PF path will return with VM_FAULT_OOM which in turn results in pagefault_out_of_memory which in turn executes out_out_memory() and can kill a random task. An allocation might fail when the current task is the oom victim and there are no memory reserves left. The OOM killer is already handled at the page allocator level for the global OOM and at the charging level for the memcg one. Both have much more information about the scope of allocation/charge request. This means that either the OOM killer has been invoked properly and didn't lead to the allocation success or it has been skipped because it couldn't have been invoked. In both cases triggering it from here is pointless and even harmful. It makes much more sense to let the killed task die rather than to wake up an eternally hungry oom-killer and send him to choose a fatter victim for breakfast. Link: https://lkml.kernel.org/r/0828a149-786e-7c06-b70a-52d086818ea3@virtuozzo.comSigned-off-by: NVasily Averin <vvs@virtuozzo.com> Suggested-by: NMichal Hocko <mhocko@suse.com> Acked-by: NMichal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: Uladzislau Rezki <urezki@gmail.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NChen Jun <chenjun102@huawei.com> Reviewed-by: NWeilong Chen <chenweilong@huawei.com> Acked-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NChen Jun <chenjun102@huawei.com> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
-
由 Naveen N. Rao 提交于
stable inclusion from stable-5.10.80 commit 1ada86999dc84b852fcc32962f4002e939f4beb7 bugzilla: 185821 https://gitee.com/openeuler/kernel/issues/I4L7CG Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=1ada86999dc84b852fcc32962f4002e939f4beb7 -------------------------------- upstream commit b7540d62 Emit similar instruction sequences to commit a048a07d ("powerpc/64s: Add support for a store forwarding barrier at kernel entry/exit") when encountering BPF_NOSPEC. Mitigations are enabled depending on what the firmware advertises. In particular, we do not gate these mitigations based on current settings, just like in x86. Due to this, we don't need to take any action if mitigations are enabled or disabled at runtime. Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/956570cbc191cd41f8274bed48ee757a86dac62a.1633464148.git.naveen.n.rao@linux.vnet.ibm.com [adjust macros to account for commits 1c9debbc and ef909ba9. adjust security feature checks to account for commit 84ed26fd] Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NChen Jun <chenjun102@huawei.com> Reviewed-by: NWeilong Chen <chenweilong@huawei.com> Acked-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NChen Jun <chenjun102@huawei.com> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
-
由 Naveen N. Rao 提交于
stable inclusion from stable-5.10.80 commit 7fcf86565bb67de1118b446397b5670fc69d3f51 bugzilla: 185821 https://gitee.com/openeuler/kernel/issues/I4L7CG Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=7fcf86565bb67de1118b446397b5670fc69d3f51 -------------------------------- upstream commit 03090592 Add a helper to return the stf_barrier type for the current processor. Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/3bd5d7f96ea1547991ac2ce3137dc2b220bae285.1633464148.git.naveen.n.rao@linux.vnet.ibm.comSigned-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NChen Jun <chenjun102@huawei.com> Reviewed-by: NWeilong Chen <chenweilong@huawei.com> Acked-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NChen Jun <chenjun102@huawei.com> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
-
由 Naveen N. Rao 提交于
stable inclusion from stable-5.10.80 commit 951fb7bf387fdb65712d53c48ac6a90ec258173f bugzilla: 185821 https://gitee.com/openeuler/kernel/issues/I4L7CG Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=951fb7bf387fdb65712d53c48ac6a90ec258173f -------------------------------- upstream commit 3832ba4e Add checks to ensure that we never emit branch instructions with truncated branch offsets. Suggested-by: NMichael Ellerman <mpe@ellerman.id.au> Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Tested-by: NJohan Almbladh <johan.almbladh@anyfinetworks.com> Reviewed-by: NChristophe Leroy <christophe.leroy@csgroup.eu> Acked-by: NSong Liu <songliubraving@fb.com> Acked-by: NJohan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/71d33a6b7603ec1013c9734dd8bdd4ff5e929142.1633464148.git.naveen.n.rao@linux.vnet.ibm.com [drop ppc32 changes] Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NChen Jun <chenjun102@huawei.com> Reviewed-by: NWeilong Chen <chenweilong@huawei.com> Acked-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NChen Jun <chenjun102@huawei.com> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
-