- 03 5月, 2016 2 次提交
-
-
由 Tom Herbert 提交于
Changes in GREv6 transmit path: - Call gre_checksum, remove gre6_checksum - Rename ip6gre_xmit2 to __gre6_xmit - Call gre_build_header utility function - Call ip6_tnl_xmit common function - Call ip6_tnl_change_mtu, eliminate ip6gre_tunnel_change_mtu Signed-off-by: NTom Herbert <tom@herbertland.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
- Create gre_rcv function. This calls gre_parse_header and ip6gre_rcv. - Call ip6_tnl_rcv. Doing this and using gre_parse_header eliminates most of the code in ip6gre_rcv. Signed-off-by: NTom Herbert <tom@herbertland.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 4月, 2016 3 次提交
-
-
由 Alexander Duyck 提交于
This patch adds code borrowed from bits and pieces of other protocols to the IPv6 GRE path so that we can support GSO over IPv6 based GRE tunnels. By adding this support we are able to significantly improve the throughput for GRE tunnels as we are able to make use of GSO. Signed-off-by: NAlexander Duyck <aduyck@mirantis.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This patch adds support for the basic offloads we support on most devices. Specifically with this patch set we can support checksum offload, basic scatter-gather, and highdma. Signed-off-by: NAlexander Duyck <aduyck@mirantis.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
When we were creating an ip6gretap interface the MTU was about 6 bytes short of what was needed. It turns out we were not taking the Ethernet header into account and as a result we were eating into the 8 bytes reserved for the encap limit. Signed-off-by: NAlexander Duyck <aduyck@mirantis.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 2月, 2016 1 次提交
-
-
由 Bernie Harris 提交于
IPCB may contain data from previous layers (in the observed case the qdisc layer). In the observed scenario, the data was misinterpreted as ip header options, which later caused the ihl to be set to an invalid value (<5). This resulted in an infinite loop in the mips implementation of ip_fast_csum. This patch clears IPCB(skb)->opt before dst_link_failure can be called for various types of tunnels. This change only applies to encapsulated ipv4 packets. The code introduced in 11c21a30 which clears all of IPCB has been removed to be consistent with these changes, and instead the opt field is cleared unconditionally in ip_tunnel_xmit. The change in ip_tunnel_xmit applies to SIT, GRE, and IPIP tunnels. The relevant vti, l2tp, and pptp functions already contain similar code for clearing the IPCB. Signed-off-by: NBernie Harris <bernie.harris@alliedtelesis.co.nz> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 2月, 2016 1 次提交
-
-
由 Jiri Benc 提交于
ether_setup sets IFF_TX_SKB_SHARING but this is not supported by gre as it modifies the skb on xmit. Also, clean up whitespace in ipgre_tap_setup when we're already touching it. Signed-off-by: NJiri Benc <jbenc@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 2月, 2016 1 次提交
-
-
由 Paolo Abeni 提交于
This also fix a potential race into the existing tunnel code, which could lead to the wrong dst to be permanenty cached: CPU1: CPU2: <xmit on ip6_tunnel> <cache lookup fails> dst = ip6_route_output(...) <tunnel params are changed via nl> dst_cache_reset() // no effect, // the cache is empty dst_cache_set() // the wrong dst // is permanenty stored // into the cache With the new dst implementation the above race is not possible since the first cache lookup after dst_cache_reset will fail due to the timestamp check Signed-off-by: NPaolo Abeni <pabeni@redhat.com> Suggested-and-acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 12月, 2015 1 次提交
-
-
由 Nicolas Dichtel 提交于
Parameters were updated only if the kernel was unable to find the tunnel with the new parameters, ie only if core pamareters were updated (keys, addr, link, type). Now it's possible to update ttl, hoplimit, flowinfo and flags. Fixes: c12b395a ("gre: Support GRE over IPv6") Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 12月, 2015 1 次提交
-
-
由 Nikolay Aleksandrov 提交于
It looks like many files are including mroute.h unnecessarily, so remove the include. Most importantly remove it from ipv6. CC: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> CC: Steffen Klassert <steffen.klassert@secunet.com> CC: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 9月, 2015 1 次提交
-
-
由 Matt Bennett 提交于
Currently error log messages in ip6gre_err are printed at 'warn' level. This is different to most other tunnel types which don't print any messages. These log messages don't provide any information that couldn't be deduced with networking tools. Also it can be annoying to have one end of the tunnel go down and have the logs fill with pointless messages such as "Path to destination invalid or inactive!". This patch reduces the log level of these messages to 'dbg' level to bring the visible behaviour into line with other tunnel types. Signed-off-by: NMatt Bennett <matt.bennett@alliedtelesis.co.nz> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 9月, 2015 3 次提交
-
-
由 Martin KaFai Lau 提交于
Problems in the current dst_entry cache in the ip6_tunnel: 1. ip6_tnl_dst_set is racy. There is no lock to protect it: - One major problem is that the dst refcnt gets messed up. F.e. the same dst_cache can be released multiple times and then triggering the infamous dst refcnt < 0 warning message. - Another issue is the inconsistency between dst_cache and dst_cookie. It can be reproduced by adding and removing the ip6gre tunnel while running a super_netperf TCP_CRR test. 2. ip6_tnl_dst_get does not take the dst refcnt before returning the dst. This patch: 1. Create a percpu dst_entry cache in ip6_tnl 2. Use a spinlock to protect the dst_cache operations 3. ip6_tnl_dst_get always takes the dst refcnt before returning Signed-off-by: NMartin KaFai Lau <kafai@fb.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Martin KaFai Lau 提交于
It is a prep work to fix the dst_entry refcnt bugs in ip6_tunnel. This patch rename: 1. ip6_tnl_dst_check() to ip6_tnl_dst_get() to better reflect that it will take a dst refcnt in the next patch. 2. ip6_tnl_dst_store() to ip6_tnl_dst_set() to have a more conventional name matching with ip6_tnl_dst_get(). Signed-off-by: NMartin KaFai Lau <kafai@fb.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Martin KaFai Lau 提交于
It is a prep work to fix the dst_entry refcnt bugs in ip6_tunnel. This patch refactors some common init codes used by both ip6gre_tunnel_init and ip6gre_tap_init. Signed-off-by: NMartin KaFai Lau <kafai@fb.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 8月, 2015 1 次提交
-
-
由 huaibin Wang 提交于
When a tunnel is deleted, the cached dst entry should be released. This problem may prevent the removal of a netns (seen with a x-netns IPv6 gre tunnel): unregister_netdevice: waiting for lo to become free. Usage count = 3 CC: Dmitry Kozlov <xeb@mail.ru> Fixes: c12b395a ("gre: Support GRE over IPv6") Signed-off-by: Nhuaibin Wang <huaibin.wang@6wind.com> Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 8月, 2015 2 次提交
-
-
由 Tom Herbert 提交于
Change the meaning of net.ipv6.auto_flowlabels to provide a mode for automatic flow labels generation. There are four modes: 0: flow labels are disabled 1: flow labels are enabled, sockets can opt-out 2: flow labels are allowed, sockets can opt-in 3: flow labels are enabled and enforced, no opt-out for sockets np->autoflowlabel is initialized according to the sysctl value. Signed-off-by: NTom Herbert <tom@herbertland.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
We can't call skb_get_hash here since the packet is not complete to do flow_dissector. Create hash based on flowi6 instead. Signed-off-by: NTom Herbert <tom@herbertland.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 4月, 2015 1 次提交
-
-
由 Johannes Berg 提交于
The code there just open-codes the same, so use the provided macro instead. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 4月, 2015 1 次提交
-
-
由 David Miller 提交于
That was we can make sure the output path of ipv4/ipv6 operate on the UDP socket rather than whatever random thing happens to be in skb->sk. Based upon a patch by Jiri Pirko. Signed-off-by: NDavid S. Miller <davem@davemloft.net> Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
-
- 03 4月, 2015 1 次提交
-
-
由 Nicolas Dichtel 提交于
Don't use dev->iflink anymore. CC: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 4月, 2015 4 次提交
-
-
由 Jiri Benc 提交于
Those are counterparts to nla_put_in_addr and nla_put_in6_addr. Signed-off-by: NJiri Benc <jbenc@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Benc 提交于
IP addresses are often stored in netlink attributes. Add generic functions to do that. For nla_put_in_addr, it would be nicer to pass struct in_addr but this is not used universally throughout the kernel, in way too many places __be32 is used to store IPv4 address. Signed-off-by: NJiri Benc <jbenc@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ian Morris 提交于
The ipv6 code uses a mixture of coding styles. In some instances check for NULL pointer is done as x != NULL and sometimes as x. x is preferred according to checkpatch and this patch makes the code consistent by adopting the latter form. No changes detected by objdiff. Signed-off-by: NIan Morris <ipm@chirality.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ian Morris 提交于
The ipv6 code uses a mixture of coding styles. In some instances check for NULL pointer is done as x == NULL and sometimes as !x. !x is preferred according to checkpatch and this patch makes the code consistent by adopting the latter form. No changes detected by objdiff. Signed-off-by: NIan Morris <ipm@chirality.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 2月, 2015 1 次提交
-
-
由 Sabrina Dubroca 提交于
info is in network byte order, change it back to host byte order before use. In particular, the current code sets the MTU of the tunnel to a wrong (too big) value. Fixes: c12b395a ("gre: Support GRE over IPv6") Signed-off-by: NSabrina Dubroca <sd@queasysnail.net> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 1月, 2015 1 次提交
-
-
由 Nicolas Dichtel 提交于
Assign rtnl_link_ops->get_link_net() callback so that IFLA_LINK_NETNSID is added to rtnetlink messages. Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 1月, 2015 1 次提交
-
-
由 Nicolas Dichtel 提交于
Implement rtnl_link_ops->get_link_net() callback so that IFLA_LINK_NETNSID is added to rtnetlink messages. Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 11月, 2014 1 次提交
-
-
由 Yuri Chislov 提交于
When using GRE redirection in WCCP, it sets the wrong skb->protocol, that is, ETH_P_IP instead of ETH_P_IPV6 for the encapuslated traffic. Fixes: c12b395a ("gre: Support GRE over IPv6") Cc: Dmitry Kozlov <xeb@mail.ru> Signed-off-by: NYuri Chislov <yuri.chislov@gmail.com> Tested-by: NYuri Chislov <yuri.chislov@gmail.com> Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 11月, 2014 1 次提交
-
-
由 Steffen Klassert 提交于
Currently we need the IP6_TNL_F_CAP_XMIT capabiltiy to transmit packets through an ipv6 tunnel. This capability is set when the tunnel gets configured, based on the tunnel endpoint addresses. On tunnels with wildcard tunnel endpoints, we need to do the capabiltiy checking on a per packet basis like it is done in the receive path. This patch extends ip6_tnl_xmit_ctl() to take local and remote addresses as parameters to allow for per packet capabiltiy checking. Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 11月, 2014 1 次提交
-
-
由 Steffen Klassert 提交于
Otherwise it gets overwritten by register_netdev(). Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 10月, 2014 1 次提交
-
-
由 Eric Dumazet 提交于
Testing xmit_more support with netperf and connected UDP sockets, I found strange dst refcount false sharing. Current handling of IFF_XMIT_DST_RELEASE is not optimal. Dropping dst in validate_xmit_skb() is certainly too late in case packet was queued by cpu X but dequeued by cpu Y The logical point to take care of drop/force is in __dev_queue_xmit() before even taking qdisc lock. As Julian Anastasov pointed out, need for skb_dst() might come from some packet schedulers or classifiers. This patch adds new helper to cleanly express needs of various drivers or qdiscs/classifiers. Drivers that need skb_dst() in their ndo_start_xmit() should call following helper in their setup instead of the prior : dev->priv_flags &= ~IFF_XMIT_DST_RELEASE; -> netif_keep_dst(dev); Instead of using a single bit, we use two bits, one being eventually rebuilt in bonding/team drivers. The other one, is permanent and blocks IFF_XMIT_DST_RELEASE being rebuilt in bonding/team. Eventually, we could add something smarter later. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 10月, 2014 1 次提交
-
-
由 Nicolas Dichtel 提交于
In xmit path, we build a flowi6 which will be used for the output route lookup. We are sending a GRE packet, neither IPv4 nor IPv6 encapsulated packet, thus the protocol should be IPPROTO_GRE. Fixes: c12b395a ("gre: Support GRE over IPv6") Reported-by: NMatthieu Ternisien d'Ouville <matthieu.tdo@6wind.com> Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 10月, 2014 1 次提交
-
-
由 Tom Herbert 提交于
Call skb_set_inner_protocol to set inner Ethernet protocol to protocol being encapsulation by GRE before tunnel_xmit. This is needed for GSO if UDP encapsulation (fou) is being done. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 9月, 2014 1 次提交
-
-
由 Steffen Klassert 提交于
ip6gre_tunnel_locate() should not return an existing tunnel if create is true. Otherwise it is possible to add the same tunnel multiple times without getting an error. So return NULL if the tunnel that should be created already exists. Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 9月, 2014 1 次提交
-
-
由 Nicolas Dichtel 提交于
With this alias, we don't need to load manually the module before adding an ip6gretap interface with iproute2. Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 7月, 2014 1 次提交
-
-
由 Tom Gundersen 提交于
Extend alloc_netdev{,_mq{,s}}() to take name_assign_type as argument, and convert all users to pass NET_NAME_UNKNOWN. Coccinelle patch: @@ expression sizeof_priv, name, setup, txqs, rxqs, count; @@ ( -alloc_netdev_mqs(sizeof_priv, name, setup, txqs, rxqs) +alloc_netdev_mqs(sizeof_priv, name, NET_NAME_UNKNOWN, setup, txqs, rxqs) | -alloc_netdev_mq(sizeof_priv, name, setup, count) +alloc_netdev_mq(sizeof_priv, name, NET_NAME_UNKNOWN, setup, count) | -alloc_netdev(sizeof_priv, name, setup) +alloc_netdev(sizeof_priv, name, NET_NAME_UNKNOWN, setup) ) v9: move comments here from the wrong commit Signed-off-by: NTom Gundersen <teg@jklm.no> Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 7月, 2014 1 次提交
-
-
由 Tom Herbert 提交于
Automatically generate flow labels for IPv6 packets on transmit. The flow label is computed based on skb_get_hash. The flow label will only automatically be set when it is zero otherwise (i.e. flow label manager hasn't set one). This supports the transmit side functionality of RFC 6438. Added an IPv6 sysctl auto_flowlabels to enable/disable this behavior system wide, and added IPV6_AUTOFLOWLABEL socket option to enable this functionality per socket. By default, auto flowlabels are disabled to avoid possible conflicts with flow label manager, however if this feature proves useful we may want to enable it by default. It should also be noted that FreeBSD has already implemented automatic flow labels (including the sysctl and socket option). In FreeBSD, automatic flow labels default to enabled. Performance impact: Running super_netperf with 200 flows for TCP_RR and UDP_RR for IPv6. Note that in UDP case, __skb_get_hash will be called for every packet with explains slight regression. In the TCP case the hash is saved in the socket so there is no regression. Automatic flow labels disabled: TCP_RR: 86.53% CPU utilization 127/195/322 90/95/99% latencies 1.40498e+06 tps UDP_RR: 90.70% CPU utilization 118/168/243 90/95/99% latencies 1.50309e+06 tps Automatic flow labels enabled: TCP_RR: 85.90% CPU utilization 128/199/337 90/95/99% latencies 1.40051e+06 UDP_RR 92.61% CPU utilization 115/164/236 90/95/99% latencies 1.4687e+06 Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 5月, 2014 1 次提交
-
-
由 Tom Herbert 提交于
Use skb_checksum_simple_validate to verify checksum. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 4月, 2014 1 次提交
-
-
由 Nicolas Dichtel 提交于
This patch allows to switch the netns when packet is encapsulated or decapsulated. In other word, the encapsulated packet is received in a netns, where the lookup is done to find the tunnel. Once the tunnel is found, the packet is decapsulated and injecting into the corresponding interface which stands to another netns. When one of the two netns is removed, the tunnel is destroyed. Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 4月, 2014 1 次提交
-
-
由 Nicolas Dichtel 提交于
It's possible to remove the FB tunnel with the command 'ip link del ip6gre0' but this is unsafe, the module always supposes that this device exists. For example, ip6gre_tunnel_lookup() may use it unconditionally. Let's add a rtnl handler for dellink, which will never remove the FB tunnel (we let ip6gre_destroy_tunnels() do the job). Introduced by commit c12b395a ("gre: Support GRE over IPv6"). CC: Dmitry Kozlov <xeb@mail.ru> Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-