- 17 7月, 2017 26 次提交
-
-
由 Xin Long 提交于
This patch is to remove the typedef sctp_random_param_t, and replace with struct sctp_random_param in the places where it's using this typedef. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
This patch is to remove the typedef sctp_supported_ext_param_t, and replace with struct sctp_supported_ext_param in the places where it's using this typedef. It is also to use sizeof(variable) instead of sizeof(type). Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
This patch is to remove the typedef sctp_adaptation_ind_param_t, and replace with struct sctp_adaptation_ind_param in the places where it's using this typedef. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
Remove it, there is even no places using it. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
This patch is to remove the typedef sctp_supported_addrs_param_t, and replace with struct sctp_supported_addrs_param in the places where it's using this typedef. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
Remove this typedef, there is even no places using it. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
This patch is to remove the typedef sctp_cookie_preserve_param_t, and replace with struct sctp_cookie_preserve_param in the places where it's using this typedef. It is also to fix some indents in sctp_sf_do_5_2_6_stale(). Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
This patch is to remove the typedef sctp_ipv6addr_param_t, and replace with struct sctp_ipv6addr_param in the places where it's using this typedef. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
This patch is to remove the typedef sctp_ipv4addr_param_t, and replace with struct sctp_ipv4addr_param in the places where it's using this typedef. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sowmini Varadhan 提交于
We could end up executing rds_conn_shutdown before the rds_recv_worker thread, then rds_conn_shutdown -> rds_tcp_conn_shutdown can do a sock_release and set sock->sk to null, which may interleave in bad ways with rds_recv_worker, e.g., it could result in: "BUG: unable to handle kernel NULL pointer dereference at 0000000000000078" [ffff881769f6fd70] release_sock at ffffffff815f337b [ffff881769f6fd90] rds_tcp_recv at ffffffffa043c888 [rds_tcp] [ffff881769f6fdb0] rds_recv_worker at ffffffffa04a4810 [rds] [ffff881769f6fde0] process_one_work at ffffffff810a14c1 [ffff881769f6fe40] worker_thread at ffffffff810a1940 [ffff881769f6fec0] kthread at ffffffff810a6b1e Also, do not enqueue any new shutdown workq items when the connection is shutting down (this may happen for rds-tcp in softirq mode, if a FIN or CLOSE is received while the modules is in the middle of an unload) Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Arvind Yadav says: ==================== atm: constify atm pci_device_id. pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arvind Yadav 提交于
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 27702 468 16 28186 6e1a drivers/atm/idt77252.o File size After adding 'const': text data bss dec hex filename 27766 404 16 28186 6e1a drivers/atm/idt77252.o Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arvind Yadav 提交于
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 21565 352 56 21973 55d5 drivers/atm/eni.o File size After adding 'const': text data bss dec hex filename 21661 256 56 21973 55d5 drivers/atm/eni.o Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arvind Yadav 提交于
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 16884 444 28 17356 43cc drivers/atm/firestream.o File size After adding 'const': text data bss dec hex filename 16980 348 28 17356 43cc drivers/atm/firestream.o Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arvind Yadav 提交于
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 14350 352 40 14742 3996 drivers/atm/zatm.o File size After adding 'const': text data bss dec hex filename 14446 256 40 14742 3996 drivers/atm/zatm.o Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arvind Yadav 提交于
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 18074 352 0 18426 47fa drivers/atm/lanai.o File size After adding 'const': text data bss dec hex filename 18170 256 0 18426 47fa drivers/atm/lanai.o Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arvind Yadav 提交于
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 16138 4592 24 20754 5112 drivers/atm/solos-pci.o File size After adding 'const': text data bss dec hex filename 16218 4528 24 20754 5122 drivers/atm/solos-pci.o Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arvind Yadav 提交于
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 9859 328 6 10193 27d1 drivers/atm/horizon.o File size After adding 'const': text data bss dec hex filename 9923 264 6 10193 27d1 drivers/atm/horizon.o Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arvind Yadav 提交于
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 26514 440 48 27002 697a drivers/atm/he.o File size After adding 'const': text data bss dec hex filename 26578 376 48 27002 697a drivers/atm/he.o Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arvind Yadav 提交于
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 22781 464 128 23373 5b4d drivers/atm/nicstar.o File size After adding 'const': text data bss dec hex filename 22845 400 128 23373 5b4d drivers/atm/nicstar.o Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arvind Yadav 提交于
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 20025 320 16 20361 4f89 drivers/atm/fore200e.o File size After adding 'const': text data bss dec hex filename 20089 256 16 20361 4f89 drivers/atm/fore200e.o Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arvind Yadav 提交于
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 13372 408 4 13784 35d8 drivers/atm/ambassador.o File size After adding 'const': text data bss dec hex filename 13484 296 4 13784 35d8 drivers/atm/ambassador.o Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arvind Yadav 提交于
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 23536 432 160 24128 5e40 drivers/atm/iphase.o File size After adding 'const': text data bss dec hex filename 23632 336 160 24128 5e40 drivers/atm/iphase.o Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vincent Bernat 提交于
The definition of an "anycast destination address" has been tweaked as a side-effect of commit 2647a9b0 ("ipv6: Remove external dependency on rt6i_gateway and RTF_ANYCAST"). The first address of a point-to-point /127 subnet is now considered as an anycast address. This prevents ICMPv6 errors to be returned to a sender of such a subnet and breaks PMTU discovery. This can be reproduced with: ip link add name out6 type veth peer name in6 ip link add name out7 type veth peer name in7 ip link set mtu 1400 dev out7 ip link set mtu 1400 dev in7 ip netns add next-hop ip netns add next-next-hop ip link set netns next-hop dev in6 ip link set netns next-hop dev out7 ip link set netns next-next-hop dev in7 ip link set up dev out6 ip addr add 2001:db8:1::12/127 dev out6 ip netns exec next-hop ip link set up dev in6 ip netns exec next-hop ip link set up dev out7 ip netns exec next-hop ip addr add 2001:db8:1::13/127 dev in6 ip netns exec next-hop ip addr add 2001:db8:1::14/127 dev out7 ip netns exec next-hop ip route add default via 2001:db8:1::15 ip netns exec next-hop sysctl -qw net.ipv6.conf.all.forwarding=1 ip netns exec next-next-hop ip link set up dev in7 ip netns exec next-next-hop ip addr add 2001:db8:1::15/127 dev in7 ip netns exec next-next-hop ip addr add 2001:db8:1::50/128 dev in7 ip netns exec next-next-hop ip route add default via 2001:db8:1::14 ip netns exec next-next-hop sysctl -qw net.ipv6.conf.all.forwarding=1 ip route add 2001:db8:1::48/123 via 2001:db8:1::13 sleep 4 ping -M do -s 1452 -c 3 2001:db8:1::50 || true ip route get 2001:db8:1::50 Before the patch, we get: 2001:db8:1::50 from :: via 2001:db8:1::13 dev out6 src 2001:db8:1::12 metric 1024 pref medium After the patch, we get: 2001:db8:1::50 via 2001:db8:1::13 dev out6 src 2001:db8:1::12 metric 0 cache expires 578sec mtu 1400 pref medium Fixes: 2647a9b0 ("ipv6: Remove external dependency on rt6i_gateway and RTF_ANYCAST") Signed-off-by: NVincent Bernat <vincent@bernat.im> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 sixiao@microsoft.com 提交于
Let bondvf.sh ignore this NIC if it has been configured, to prevent user configuration from being overwritten unexpectly. Signed-off-by: NSimon Xiao <sixiao@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shannon Nelson 提交于
The original code didn't handle non-IPv4 packets very well, so the offload advertising had to be scaled back down to just IP. Here we add the bits needed to support TCP and UDP packets over IPv6 and turn the offload advertising back on. Orabug: 26289579 Signed-off-by: NShannon Nelson <shannon.nelson@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 7月, 2017 13 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Fix 64-bit division in mlx5 IPSEC offload support, from Ilan Tayari and Arnd Bergmann. 2) Fix race in statistics gathering in bnxt_en driver, from Michael Chan. 3) Can't use a mutex in RCU reader protected section on tap driver, from Cong WANG. 4) Fix mdb leak in bridging code, from Eduardo Valentin. 5) Fix free of wrong pointer variable in nfp driver, from Dan Carpenter. 6) Buffer overflow in brcmfmac driver, from Arend van SPriel. 7) ioremap_nocache() return value needs to be checked in smsc911x driver, from Alexey Khoroshilov. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (34 commits) net: stmmac: revert "support future possible different internal phy mode" sfc: don't read beyond unicast address list datagram: fix kernel-doc comments socket: add documentation for missing elements smsc911x: Add check for ioremap_nocache() return code brcmfmac: fix possible buffer overflow in brcmf_cfg80211_mgmt_tx() net: hns: Bugfix for Tx timeout handling in hns driver net: ipmr: ipmr_get_table() returns NULL nfp: freeing the wrong variable mlxsw: spectrum_switchdev: Check status of memory allocation mlxsw: spectrum_switchdev: Remove unused variable mlxsw: spectrum_router: Fix use-after-free in route replace mlxsw: spectrum_router: Add missing rollback samples/bpf: fix a build issue bridge: mdb: fix leak on complete_info ptr on fail path tap: convert a mutex to a spinlock cxgb4: fix BUG() on interrupt deallocating path of ULD qed: Fix printk option passed when printing ipv6 addresses net: Fix minor code bug in timestamping.txt net: stmmac: Make 'alloc_dma_[rt]x_desc_resources()' look even closer ...
-
由 Linus Torvalds 提交于
I made the mistake of upgrading my desktop to the new Fedora 26 that comes with gcc-7.1.1. There's nothing wrong per se that I've noticed, but I now have 1500 lines of warnings, mostly from the new format-truncation warning triggering all over the tree. We use 'snprintf()' and friends in a lot of places, and often know that the numbers are fairly small (ie a controller index or similar), but gcc doesn't know that, and sees an 'int', and thinks that it could be some huge number. And then complains when our buffers are not able to fit the name for the ten millionth controller. These warnings aren't necessarily bad per se, and we probably want to look through them subsystem by subsystem, but at least during the merge window they just mean that I can't even see if somebody is introducing any *real* problems when I pull. So warnings disabled for now. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux由 Linus Torvalds 提交于
Pull modules updates from Jessica Yu: "Summary of modules changes for the 4.13 merge window: - Minor code cleanups - Avoid accessing mod struct prior to checking module struct version, from Kees - Fix racy atomic inc/dec logic of kmod_concurrent_max in kmod, from Luis" * tag 'modules-for-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: module: make the modinfo name const kmod: reduce atomic operations on kmod_concurrent and simplify module: use list_for_each_entry_rcu() on find_module_all() kernel/module.c: suppress warning about unused nowarn variable module: Add module name to modinfo module: Pass struct load_info into symbol checks
-
由 LABBE Corentin 提交于
Since internal phy-mode is reserved for non-xMII protocol we cannot use it with dwmac-sun8i. Furthermore, all DT patchs which comes with this patch were cleaned, so the current state is broken. This reverts commit 1c2fa5f8 ("net: stmmac: support future possible different internal phy mode") Fixes: 1c2fa5f8 ("net: stmmac: support future possible different internal phy mode") Signed-off-by: NCorentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bert Kenward 提交于
If we have more than 32 unicast MAC addresses assigned to an interface we will read beyond the end of the address table in the driver when adding filters. The next 256 entries store multicast addresses, so we will end up attempting to insert duplicate filters, which is mostly harmless. If we add more than 288 unicast addresses we will then read past the multicast address table, which is likely to be more exciting. Fixes: 12fb0da4 ("sfc: clean fallbacks between promisc/normal in efx_ef10_filter_sync_rx_mode") Signed-off-by: NBert Kenward <bkenward@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Stephen Hemminger says: ==================== minor net kernel-doc fixes Fix a couple of small errors in kernel-doc for networking ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
An underscore in the kernel-doc comment section has special meaning and mis-use generates an errors. ./net/core/datagram.c:207: ERROR: Unknown target name: "msg". ./net/core/datagram.c:379: ERROR: Unknown target name: "msg". ./net/core/datagram.c:816: ERROR: Unknown target name: "t". Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
Fill in missing kernel-doc for missing elements in struct sock. Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Khoroshilov 提交于
There is no check for return code of smsc911x_drv_probe() in smsc911x_drv_probe(). The patch adds one. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: NAlexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux由 Linus Torvalds 提交于
Pull i2c updates from Wolfram Sang: "This pull request contains: - i2c core reorganization. One source file became too monolithic. It is now split up, yet we still have the same named object as the final output. This should ease maintenance. - new drivers: ZTE ZX2967 family, ASPEED 24XX/25XX - designware driver gained slave mode support - xgene-slimpro driver gained ACPI support - bigger overhaul for pca-platform driver - the algo-bit module now supports messages with enforced STOP - slightly bigger than usual set of driver updates and improvements and with much appreciated quality assurance from Andy Shevchenko" * 'i2c/for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (51 commits) i2c: Provide a stub for i2c_detect_slave_mode() i2c: designware: Let slave adapter support be optional i2c: designware: Make HW init functions static i2c: designware: fix spelling mistakes i2c: pca-platform: propagate error from i2c_pca_add_numbered_bus i2c: pca-platform: correctly set algo_data.reset_chip i2c: acpi: Do not create i2c-clients for LNXVIDEO ACPI devices i2c: designware: enable SLAVE in platform module i2c: designware: add SLAVE mode functions i2c: zx2967: drop COMPILE_TEST dependency i2c: zx2967: always use the same device when printing errors i2c: pca-platform: use dev_warn/dev_info instead of printk i2c: pca-platform: use device managed allocations i2c: pca-platform: add devicetree awareness i2c: pca-platform: switch to struct gpio_desc dt-bindings: add bindings for i2c-pca-platform i2c: cadance: fix ctrl/addr reg write order i2c: zx2967: add i2c controller driver for ZTE's zx2967 family dt: bindings: add documentation for zx2967 family i2c controller i2c: algo-bit: add support for I2C_M_STOP ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu由 Linus Torvalds 提交于
Pull IOMMU updates from Joerg Roedel: "This update comes with: - Support for lockless operation in the ARM io-pgtable code. This is an important step to solve the scalability problems in the common dma-iommu code for ARM - Some Errata workarounds for ARM SMMU implemenations - Rewrite of the deferred IO/TLB flush code in the AMD IOMMU driver. The code suffered from very high flush rates, with the new implementation the flush rate is down to ~1% of what it was before - Support for amd_iommu=off when booting with kexec. The problem here was that the IOMMU driver bailed out early without disabling the iommu hardware, if it was enabled in the old kernel - The Rockchip IOMMU driver is now available on ARM64 - Align the return value of the iommu_ops->device_group call-backs to not miss error values - Preempt-disable optimizations in the Intel VT-d and common IOVA code to help Linux-RT - Various other small cleanups and fixes" * tag 'iommu-updates-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (60 commits) iommu/vt-d: Constify intel_dma_ops iommu: Warn once when device_group callback returns NULL iommu/omap: Return ERR_PTR in device_group call-back iommu: Return ERR_PTR() values from device_group call-backs iommu/s390: Use iommu_group_get_for_dev() in s390_iommu_add_device() iommu/vt-d: Don't disable preemption while accessing deferred_flush() iommu/iova: Don't disable preempt around this_cpu_ptr() iommu/arm-smmu-v3: Add workaround for Cavium ThunderX2 erratum #126 iommu/arm-smmu-v3: Enable ACPI based HiSilicon CMD_PREFETCH quirk(erratum 161010701) iommu/arm-smmu-v3: Add workaround for Cavium ThunderX2 erratum #74 ACPI/IORT: Fixup SMMUv3 resource size for Cavium ThunderX2 SMMUv3 model iommu/arm-smmu-v3, acpi: Add temporary Cavium SMMU-V3 IORT model number definitions iommu/io-pgtable-arm: Use dma_wmb() instead of wmb() when publishing table iommu/io-pgtable: depend on !GENERIC_ATOMIC64 when using COMPILE_TEST with LPAE iommu/arm-smmu-v3: Remove io-pgtable spinlock iommu/arm-smmu: Remove io-pgtable spinlock iommu/io-pgtable-arm-v7s: Support lockless operation iommu/io-pgtable-arm: Support lockless operation iommu/io-pgtable: Introduce explicit coherency iommu/io-pgtable-arm-v7s: Refactor split_blk_unmap ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs由 Linus Torvalds 提交于
Pull overlayfs updates from Miklos Szeredi: "This work from Amir introduces the inodes index feature, which provides: - hardlinks are not broken on copy up - infrastructure for overlayfs NFS export This also fixes constant st_ino for samefs case for lower hardlinks" * 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: (33 commits) ovl: mark parent impure and restore timestamp on ovl_link_up() ovl: document copying layers restrictions with inodes index ovl: cleanup orphan index entries ovl: persistent overlay inode nlink for indexed inodes ovl: implement index dir copy up ovl: move copy up lock out ovl: rearrange copy up ovl: add flag for upper in ovl_entry ovl: use struct copy_up_ctx as function argument ovl: base tmpfile in workdir too ovl: factor out ovl_copy_up_inode() helper ovl: extract helper to get temp file in copy up ovl: defer upper dir lock to tempfile link ovl: hash overlay non-dir inodes by copy up origin ovl: cleanup bad and stale index entries on mount ovl: lookup index entry for copy up origin ovl: verify index dir matches upper dir ovl: verify upper root dir matches lower root dir ovl: introduce the inodes index dir feature ovl: generalize ovl_create_workdir() ...
-
由 Al Viro 提交于
Reported-and-tested-by: NMeelis Roos <mroos@linux.ee> Fixes: commit d9e968cb "getrlimit()/setrlimit(): move compat to native" Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 12 7月, 2017 1 次提交
-
-
由 Arend van Spriel 提交于
The lower level nl80211 code in cfg80211 ensures that "len" is between 25 and NL80211_ATTR_FRAME (2304). We subtract DOT11_MGMT_HDR_LEN (24) from "len" so thats's max of 2280. However, the action_frame->data[] buffer is only BRCMF_FIL_ACTION_FRAME_SIZE (1800) bytes long so this memcpy() can overflow. memcpy(action_frame->data, &buf[DOT11_MGMT_HDR_LEN], le16_to_cpu(action_frame->len)); Cc: stable@vger.kernel.org # 3.9.x Fixes: 18e2f61d ("brcmfmac: P2P action frame tx.") Reported-by: N"freenerguo(郭大兴)" <freenerguo@tencent.com> Signed-off-by: NArend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-