/home/v4l/v4l/patchwork/drivers/media/dvb/frontends/drxk_hard.c:181: multiple definition of `MulDiv32'
drivers/media/dvb/frontends/drxd.o:/home/v4l/v4l/patchwork/drivers/media/dvb/frontends/drxd_hard.c:236: first defined here
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Both drxd and siano drivers were including linux/version.h without
any reason. Probably, this is due to some compatibility code that
used to exist before having their support added into the Linux
Kernel.
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/dvb/frontends/drxd_hard.c: In function ‘DRX_Start’:
drivers/media/dvb/frontends/drxd_hard.c:2327: warning: enumeration value ‘BANDWIDTH_5_MHZ’ not handled in switch
drivers/media/dvb/frontends/drxd_hard.c:2327: warning: enumeration value ‘BANDWIDTH_10_MHZ’ not handled in switch
drivers/media/dvb/frontends/drxd_hard.c:2327: warning: enumeration value ‘BANDWIDTH_1_712_MHZ’ not handled in switch

[mchehab@redhat.com: removed the status = status assignment after the switch]
Signed-off-by: NAndreas Oberritter <obi@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

There are still lots of 80-columns warnings and a few errors
at some tables, but changing them would require more work and
with probably not much gain.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The macro is defined as:
	#define CHK_ERROR(s) if( (status = s)<0 ) break

This sucks, as makes harder to debug if something got wrong and
there are more than one level of loops. Also, violates CodingStyle.

Fixed by this simple perl script:

	while (<>) { $f.=$_; };

	$f=~ s,\n\#define CHK_ERROR[^\n]+\n,\n,;

	$f=~ s=(CHK_ERROR\(.*\,)\n\s+=\1 =g;
	$f=~ s=(CHK_ERROR\(.*\,)\n\s+=\1 =g;
	$f=~ s=(CHK_ERROR\(.*\,)\n\s+=\1 =g;
	$f=~ s=(CHK_ERROR\(.*)\s+(\,)\n\s+=\1\2 =g;
	$f=~ s=(CHK_ERROR\(.*)\s+(\,)\n\s+=\1\2 =g;
	$f=~ s=(CHK_ERROR\(.*)\s+(\,)\n\s+=\1\2 =g;

	$f=~ s,\n(\t+)CHK_ERROR\((.*)\)\;,\n\1status = \2;\n\1if (status < 0)\n\1\tbreak;,g;

	print $f;

Plus a few manual adjustments
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Take a first cleanup pass over the sources to bring them closer to the
Linux coding style.
Signed-off-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Abstract out the firmware for the drx-d so that it can be loaded by the
request_firmware() interface.

The firmware licensing permits free redistribution, and can be found here:

http://kernellabs.com/firmware/drxdSigned-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

If the tuner is not actually behind an i2c gate, using the i2c gate control
function can wedge the i2c bus.  Provide the ability to control on a per-board
basis whether it should be used.

Problem was noticed on the HVR-900 R2, where it resulted in the first tuning
attempt succeeding, and then all subsequent attempts to access the xc3028
being treated as failures (including the call to sleep the tuner).
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Provide the ability for the board configuration to specify whether to insert
the RS byte into the TS interconnect to the bridge, while not required for
the ngene in fact is required for the em28xx.
Signed-off-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

These are the original drx-d sources, extracted from Ralph Metzler's GPL'd
ngene driver.  No modifications/cleanup have yet been made.  In fact, no
measures have been taken to see if the code even compiles.

Signed-off-by Ralph Metzler <rjkm@metzlerbros.de>
Signed-off-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>