- 17 5月, 2009 2 次提交
-
-
由 Sergei Shtylyov 提交于
The second IDE channel of version 6 PCB is not being registered anymore since the commit 48c3c107 (ide: add struct ide_host (take 3)). Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Tejun Heo 提交于
Impact: fix an oops which always triggers ide_tape_issue_pc() assumed drive->pc isn't NULL on invocation when checking for back-to-back request sense issues but drive->pc can be NULL and even when it's not NULL, it's not safe to dereference it once the previous command is complete because pc could have been freed or was on stack. Kill back-to-back REQUEST_SENSE detection. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
- 01 5月, 2009 1 次提交
-
-
由 Borislav Petkov 提交于
Original patch (dfa4411c) was buggy. This is a more proper fix which introduces blk_rq_quiet() macro alleviating the need for dumb, too short caching variables. Thanks to Helge Deller and Bart for debugging this. Signed-off-by: NBorislav Petkov <petkovbb@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Reported-and-tested-by: NHelge Deller <deller@gmx.de> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
- 24 4月, 2009 3 次提交
-
-
By a popular demand quilt tree was replaced by a git one. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Remove superfluous commas and add missing whitespaces. Noticed-by: NJoe Perches <joe@perches.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 David Brownell 提交于
Bugfixes noted by checking the code against the controller documentation (TI document number SPRUE21): - Remove declarations for eight non-existent registers (!); and remove accesses to two of them. - Remove access to various non-existent bitfields in some of the registers which *do* exist (those fields must-be-zero). - Provide comment to replace bogus reset logic (removed above, it relied on non-existent bitfields). Resets require GPIO help; this driver doesn't currently know about that. With some minor cleanup: relocate a comment, avoid an extra lookup of the PIO timings. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
- 23 4月, 2009 4 次提交
-
-
On Tuesday 14 April 2009 20:31:21 Subrata Modak wrote: > Observed the following build error: > --- > CC drivers/macintosh/mediabay.o > In file included from drivers/macintosh/mediabay.c:21: > include/linux/ide.h:605: error: field ‘request_sense_rq’ has incomplete > type > make[2]: *** [drivers/macintosh/mediabay.o] Error 1 > make[1]: *** [drivers/macintosh] Error 2 > make: *** [drivers] Error 2 > --- mediabay shouldn't include <linux/ide.h> unconditionally so remove the superfluous include from mediabay.c (<asm/mediabay.h> will pull <linux/ide.h> in for CONFIG_BLK_DEV_IDE_PMAC=y). Reported-by: NSubrata Modak <subrata@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Bruno Prémont 提交于
My laptop (Acer Travelmate 660) always cuts the power when rebooting which causes the disk to emergency-park it's head. Add a dmi check to stop disk as for shutdown on this laptop. Signed-off-by: NBruno Prémont <bonbons@linux-vserver.org> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Helge Deller 提交于
With 2.6.30-rc2 I face a kernel crash on the 32bit hppa architecture due to ide-cd when udev creates the device nodes at startup: Kernel Fault: Code=26 regs=8ed34c40 (Addr=00000024) IASQ: 00000000 00000000 IAOQ: 1034b5ac 1034b5b0 IIR: 4ab30048 ISR: 00000000 IOR: 00000024 CPU: 0 CR30: 8ed34000 CR31: ffff55ff ORIG_R28: 00000000 IAOQ[0]: ide_complete_rq+0x2c/0x70 IAOQ[1]: ide_complete_rq+0x30/0x70 RP(r2): cdrom_newpc_intr+0x178/0x46c Backtrace: [<1035c608>] cdrom_newpc_intr+0x178/0x46c [<1034c494>] ide_intr+0x1b0/0x214 [<1016d284>] handle_IRQ_event+0x70/0x150 [<1016d4b0>] __do_IRQ+0x14c/0x1cc [<102f7864>] superio_interrupt+0x88/0xbc [<1016d284>] handle_IRQ_event+0x70/0x150 [<1016d4b0>] __do_IRQ+0x14c/0x1cc [<10112efc>] do_cpu_irq_mask+0x9c/0xd0 [<10116068>] intr_return+0x0/0x4 This crash seems to happen due to an uninitialized variable "rc". The compiler even warns about that: CC drivers/ide/ide-cd.o /mnt/sda4/home/cvs/parisc/git-kernel/linus-linux-2.6/drivers/ide/ide-cd.c: In function `cdrom_newpc_intr': /mnt/sda4/home/cvs/parisc/git-kernel/linus-linux-2.6/drivers/ide/ide-cd.c:612: warning: `rc' might be used uninitialized in this function After applying the trivial patch below, which just initializes the variable to zero, the kernel doesn't crash any longer: Starting the hotplug events dispatcher: udevd. Synthesizing the initial hotplug events... hda: command error: status=0x51 { DriveReady SeekComplete Error } hda: command error: error=0x54 <3>{ AbortedCommand LastFailedSense=0x05 } ide: failed opcode was: unknown done. Signed-off-by: NHelge Deller <deller@gmx.de> Acked-by: NBorislav Petkov <petkovbb@gmail.com> Cc: Linus <torvalds@linux-foundation.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 David Brownell 提交于
Fix UDMA throughput bug: tCYC averages t2CYCTYP/2, but the code previously assumed it was the same as t2CYCTYP. (That is, it was using just one clock edge, not both.) Move the table's type declaration so it's adjacent to the table, making it more clear what those numbers mean. On one system this change increased throughput by almost 4x: UDMA/66 sometimes topped 23 MB/sec (on a drive known to do much better). On another system it was around a 10% win (UDMA/66 up to 7+ MB/sec). The difference might be caused by the ratio between memory and IDE clocks. In the system with large speedup, this was exactly 2 (as a workaround for a rev 1.1 silicon bug). The other system used a more standard ratio of 1.63 (and rev 2.1 silicon) ... clock domain synch might have some issues, they're not unheard-of. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
- 18 4月, 2009 30 次提交
-
-
由 Sergei Shtylyov 提交于
The driver somehow got merged with the initializer for the dma_sff_read_status() method missing which caused kernel panic on bootup. This should fix the kernel.org bug #13026... Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Reported-by: NArnd Hannemann <hannemann@nets.rwth-aachen.de> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Freeing non-slab objects is bad and results in an oops. Fix it. Reported-and-tested-by: NAndrew Price <andy@andrewprice.me.uk> Cc: Theodore Tso <tytso@mit.edu> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Jack Stone 提交于
Remove uneeded void casts Signed-off-by: NJack Stone <jwjstone@fastmail.fm> Cc: jeff@garzik.org Cc: kernel-janitors@vger.kernel.org Cc: Jack Stone <jwjstone@fastmail.fm> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Sergei Shtylyov 提交于
Use ATA_DMA_* constants instead of the bare numbers for the BMIDE register bits. Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Sergei Shtylyov 提交于
The big driver change in 2.4.19-rc1 introduced a regression for many HPT370[A] chips -- DMA stopped to work completely, only causing endless timeouts... The culprit has been identified (at last!): it turned to be the code resetting the DMA state machine before each transfer. Stop doing it now as this counter- measure has clearly caused more harm than good. This should fix the kernel.org bug #7703. Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: [libata] fix build error on drivers/ata/pata_legacy.c pata_via: Cache and rewrite the device bit sata_mv: workaround for multi_count errata sata24 sata_mv: tidy up qc->tf usage in qc_prep() functions
-
由 Zhenwen Xu 提交于
fix those errors: drivers/ata/pata_legacy.c: In function ‘pdc_data_xfer_vlb’: drivers/ata/pata_legacy.c:289: error: ‘ap’ undeclared (first use in this function) drivers/ata/pata_legacy.c:289: error: (Each undeclared identifier is reported only once drivers/ata/pata_legacy.c:289: error: for each function it appears in.) drivers/ata/pata_legacy.c: At top level: drivers/ata/pata_legacy.c:869: error: ‘ATA_PFLAG_PIO32_CHANGE’ undeclared here (not in a +function) make[2]: *** [drivers/ata/pata_legacy.o] Error 1 make[1]: *** [drivers/ata] Error 2 Signed-off-by: NZhenwen Xu <helight.xu@gmail.com> Acked-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Alan Cox 提交于
Some VIA chipsets will reset the DEV bit after IEN changes on ctl. Our optimised write path avoids doing this but we need to remove the optimisation on these devices. [Identified and some original patches proposed by Josehn Chan @ VIA but discussion then all ground to a halt so given a test case I dug it back out] Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk Tested-by: Christoph Bisping (bug #13086) Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Mark Lord 提交于
Workaround for errata SATA#24 in sata_mv. This errata affects WRITE_MULTI* commands when the device multi_count produces a DRQ block size >= 4Kbytes. We work around it here by converting such operations into ordinary PIO_WRITEs instead. Note that this might result in a PIO FUA write unavoidably being converted into a non-FUA write. In practice, any system using FUA is also going to be using DMA rather than PIO, so this shouldn't affect anyone in the real world. Signed-off-by: NMark Lord <mlord@pobox.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Mark Lord 提交于
Tidy up qc->tf accesses in the mv_qc_prep() functions. Signed-off-by: NMark Lord <mlord@pobox.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (43 commits) staging: slicoss: update README otus/zdusb.c: additional USB idnetifier Staging: go7007: fix build issues Staging: sxg: Fix leaks and checksum errors in transmit code path Staging: sxg: Fix sleep in atomic context warning while loading driver Staging: sxg: Use correct queue_id for transmitting non-TCP packets Staging: sxg: Fire watchdog timer at end of open routine to change the link Staging: Pohmelfs: Add load balancing between network states with the same priority. Staging: Pohmelfs: Added IO permissions and priorities. Staging: Pohmelfs: Added ->show_stats() callback. Staging: Pohmelfs: Drop ftrans debugging code. Staging: Pohmelfs: Use wait_on_page_timeout when waiting for remote directory sync instead of hardcoded 25 seconds. Staging: Pohmelfs: Reduce debugging noise about non-existing objects. Staging: Pohmelfs: Sync fs before killing it, since dentry cache is shrunk before writeback is invoked via generic_shutdown_super() Staging: Pohmelfs: Extend remount option. Staging: Pohmelfs: Set NETFS_INODE_REMOTE_SYNCED and clear NETFS_INODE_OWNED bits in the root inode. Staging: Pohmelfs: Added 'need_lock' variable into debug print. Staging: Pohmelfs: Disable read lock in pohmelfs_getattr(). Staging: Pohmelfs: Move parent lock to the place where we really have to send a lookup request to the server. Staging: pohmelfs: Populate dentry cache when receiving the new readdir entry. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: UIO: fix specific device driver missing statement for depmod Driver core: remove pr_fmt() from dynamic_dev_dbg() printk driver core: prevent device_for_each_child from oopsing dynamic debug: resurrect old pr_debug() semantics as pr_devel() Driver Core: early platform driver proc: mounts_poll() make consistent to mdstat_poll sysfs: sysfs poll keep the poll rule of regular file. driver core: allow non-root users to listen to uevents driver core: fix driver_match_device sysfs: don't use global workqueue in sysfs_schedule_callback()
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (22 commits) WUSB: correct format of wusb_chid sysfs file WUSB: fix oops when completing URBs for disconnected devices WUSB: disconnect all devices when stopping a WUSB HCD USB: whci-hcd: check return value of usb_hcd_link_urb_to_ep() USB: whci-hcd: provide a endpoint_reset method USB: add reset endpoint operations USB device codes for Motorola phone. usb-storage: fix mistake in Makefile USB: usb-serial ch341: support for DTR/RTS/CTS Revert USB: usb-serial ch341: support for DTR/RTS/CTS USB: musb: fix possible panic while resuming USB: musb: fix isochronous TXDMA (take 2) USB: musb: sanitize clearing TXCSR DMA bits (take 2) USB: musb: bugfixes for multi-packet TXDMA support USB: musb_host, fix ep0 fifo flushing USB: usb-storage: augment unusual_devs entry for Simple Tech/Datafab USB: musb_host, minor enqueue locking fix (v2) USB: fix oops in cdc-wdm in case of malformed descriptors USB: qcserial: Add extra device IDs USB: option: Add ids for D-Link DWM-652 3.5G modem ...
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-arm: (48 commits) [ARM] S3C24XX: ADC: Check pending queue before freeing adc client [ARM] S3C: Fix ADC driver sparse warning [ARM] Osiris: Fix double initialisation in machine block [ARM] Anubis: Fix sparse warnings for items that should be static [ARM] JIVE: Fix sparse warnings about items which should be static [ARM] S3C: Fix sparse warning from missing 's3c_device_hwmon' [ARM] S3C24XX: Fix sparse error in gpiolib.c [ARM] 5455/1: Fix IRQ noise from VIC code [ARM] 5454/1: ep93xx_eth: fix sparse warnings [ARM] remove .gitignore from include/asm-arm Update MAINTAINERS mxc defconfig updates mx31ads: Mark as having full regulatoion constraints with 1133-EV1 board mx31ads: Depend on all the WM8350 core dependencies for WM1133-EV1 board Fix ifdef in plat-mxc/irc.c MX1ADS: remove I2C ifdefs qong: remove AIPS[12] mappings from machine-specific iotable mx31ads: imoux pins should be passed in as unsigned int MXC: remove orphan imx_init_uart() definition mx31: pin definition for csi ...
-
-
-
由 Stephen Hemminger 提交于
I looked, I gagged, I left Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Daniele Napolitano 提交于
Provide support for WN111v2 USB 802.11n adapter. Signed-off-by: NDaniele Napolitano <dnax88@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
Now that TUNER_SET_TYPE_ADDR is gone from the tree, the older code kicks in and tries to use TUNER_SET_TYPE, which went away a long time ago. This patch removes all of this logic, as it should not be needed anymore now, and by doing so, fixes the build. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mithlesh Thukral 提交于
Fix the transmit function for the following: * Free XmtCmd in the error code path. This use to leak memory in error conditions. * Do pci mapping after the checksum operations are over. They can reallocate the skb at a different location. * Fix UDP checksum errors which were seen in wireshark Signed-off-by: NLinSysSoft Sahara Team <saharaproj@linsyssoft.com> Signed-off-by: NMithlesh Thukral <mithlesh@linsyssoft.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mithlesh Thukral 提交于
Leave a spinlock before calling request_irq(). request_irq() calls kmalloc which can sleep. This was generating a warning dump while driver is loaded. Signed-off-by: NLinSysSoft Sahara Team <saharaproj@linsyssoft.com> Signed-off-by: NMithlesh Thukral <mithlesh@linsyssoft.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mithlesh Thukral 提交于
Use correct queue_id while transmitting non-TCP packets. They should always use queue 0. Signed-off-by: NLinSysSoft Sahara Team <saharaproj@linsyssoft.com> Signed-off-by: NMithlesh Thukral <mithlesh@linsyssoft.com>
-
由 Mithlesh Thukral 提交于
The watchdog timer which updates the link status was not fired at the end of sxg_entry_open(). Add that. Signed-off-by: NLinSysSoft Sahara Team <saharaproj@linsyssoft.com> Signed-off-by: NMithlesh Thukral <mithlesh@linsyssoft.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Evgeniy Polyakov 提交于
Signed-off-by: NEvgeniy Polyakov <zbr@ioremap.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Evgeniy Polyakov 提交于
Signed-off-by: NEvgeniy Polyakov <zbr@ioremap.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Evgeniy Polyakov 提交于
Signed-off-by: NEvgeniy Polyakov <zbr@ioremap.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Evgeniy Polyakov 提交于
Signed-off-by: NEvgeniy Polyakov <zbr@ioremap.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Evgeniy Polyakov 提交于
Staging: Pohmelfs: Use wait_on_page_timeout when waiting for remote directory sync instead of hardcoded 25 seconds. Signed-off-by: NEvgeniy Polyakov <zbr@ioremap.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Evgeniy Polyakov 提交于
Signed-off-by: NEvgeniy Polyakov <zbr@ioremap.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Evgeniy Polyakov 提交于
Staging: Pohmelfs: Sync fs before killing it, since dentry cache is shrunk before writeback is invoked via generic_shutdown_super() Signed-off-by: NEvgeniy Polyakov <zbr@ioremap.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-