IPV6_2292PKTOPTIONS is broken for 32-bit applications running
in COMPAT mode on 64-bit kernels.

The same problem was fixed for IPv4 with the patch:
ipv4: Fix ip_getsockopt for IP_PKTOPTIONS,
commit dd23198eSigned-off-by: NSorin Dumitru <sdumitru@ixiacom.com>
Signed-off-by: NDaniel Baluta <dbaluta@ixiacom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The l4_rxhash flag was added to the skb structure to indicate
that the rxhash value was computed over the 4 tuple for the
packet which includes the port information in the encapsulated
transport packet.  This is used by the stack to preserve the
rxhash value in __skb_rx_tunnel.
Signed-off-by: NTom Herbert <therbert@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

sit tunnels (IPv6 tunnel over IPv4) do not implement the "tos inherit"
case to copy the IPv6 transport class byte from the inner packet to
the IPv4 type of service byte in the outer packet. By contrast, ipip
tunnels and GRE tunnels do.

This patch, adapted from the similar code in net/ipv4/ipip.c and
net/ipv4/ip_gre.c, implements that.

This patch applies to 3.0.1, and has been tested on that version.
Signed-off-by: NLionel Elie Mamane <lionel@mamane.lu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

RCU api had been completed and rcu_access_pointer() or
rcu_dereference_protected() are better than generic
rcu_dereference_raw()
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Using a gcc 4.4.3, warnings are emitted for a possibly uninitialized use
of ecn_ok.

This can happen if cookie_check_timestamp() returns due to not having
seen a timestamp.  Defaulting to ecn off seems like a reasonable thing
to do in this case, so initialized ecn_ok to false.
Signed-off-by: NMike Waychison <mikew@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Computers have become a lot faster since we compromised on the
partial MD4 hash which we use currently for performance reasons.

MD5 is a much safer choice, and is inline with both RFC1948 and
other ISS generators (OpenBSD, Solaris, etc.)

Furthermore, only having 24-bits of the sequence number be truly
unpredictable is a very serious limitation.  So the periodic
regeneration and 8-bit counter have been removed.  We compute and
use a full 32-bit sequence number.

For ipv6, DCCP was found to use a 32-bit truncated initial sequence
number (it needs 43-bits) and that is fixed here as well.
Reported-by: NDan Kaminsky <dan@doxpara.com>
Tested-by: NWilly Tarreau <w@1wt.eu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When support for binding to 'mapped INADDR_ANY (::ffff.0.0.0.0)' was added
in 0f8d3c7a the rest of the code
wasn't told so now it's possible to bind IPv6 datagram socket to
::ffff.0.0.0.0, connect it to another IPv4 address and it will all
work except for getsockhame() which does not return the local address
as expected.

To give getsockname() something to work with check for 'mapped INADDR_ANY'
when connecting and update the in-core source addresses appropriately.
Signed-off-by: NMax Matveev <makc@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Gergely Kalman reported crashes in check_peer_redir().

It appears commit f39925db (ipv4: Cache learned redirect
information in inetpeer.) added a race, leading to possible NULL ptr
dereference.

Since we can now change dst neighbour, we should make sure a reader can
safely use a neighbour.

Add RCU protection to dst neighbour, and make sure check_peer_redir()
can be called safely by different cpus in parallel.

As neighbours are already freed after one RCU grace period, this patch
should not add typical RCU penalty (cache cold effects)

Many thanks to Gergely for providing a pretty report pointing to the
bug.
Reported-by: NGergely Kalman <synapse@hippy.csoma.elte.hu>
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When assigning a NULL value to an RCU protected pointer, no barrier
is needed. The rcu_assign_pointer, used to handle that but will soon
change to not handle the special case.

Convert all rcu_assign_pointer of NULL value.

//smpl
@@ expression P; @@

- rcu_assign_pointer(P, NULL)
+ RCU_INIT_POINTER(P, NULL)

// </smpl>
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Update the code to handle some of the differences between
RFC 3041 and RFC 4941, which obsoletes it. Also a couple
of janitorial fixes.

- Allow router advertisements to increase the lifetime of
  temporary addresses. This was not allowed by RFC 3041,
  but is specified by RFC 4941. It is useful when RA
  lifetimes are lower than TEMP_{VALID,PREFERRED}_LIFETIME:
  in this case, the previous code would delete or deprecate
  addresses prematurely.

- Change the default of MAX_RETRY to 3 per RFC 4941.

- Add a comment to clarify that the preferred and valid
  lifetimes in inet6_ifaddr are relative to the timestamp.

- Shorten lines to 80 characters in a couple of places.
Signed-off-by: NLorenzo Colitti <lorenzo@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Even using percpu stats, we still hit tunnel dst_entry refcount in
ip6_tnl_xmit2()

Since we are in RCU locked section, we can use skb_dst_set_noref() and
avoid these atomic operations, leaving dst shared on cpus.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ipv6_destopt_rcv() runs with rcu_read_lock(), so there is no need to
take a temporay reference on dst_entry, even if skb is freed by
ip6_parse_tlv()
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use RCU to avoid changing dst_entry refcount in fast path.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ICMP and ND are not fast path, but still we can avoid changing idev
refcount, using RCU.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This allows us to move duplicated code in <asm/atomic.h>
(atomic_inc_not_zero() for now) to <linux/atomic.h>
Signed-off-by: NArun Sharma <asharma@fb.com>
Reviewed-by: NEric Dumazet <eric.dumazet@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Original commit 2bda8a0c... "Disable router anycast
address for /127 prefixes" says:

|   No need for matching code in addrconf_leave_anycast() as it
|   will silently ignore any attempt to leave an unknown anycast
|   address.

After analysis, because 1) we may add two or more prefixes on the
same interface, or 2)user may have manually joined that anycast,
we may hit chances to have anycast address which as if we had
generated one by /127 prefix and we should not leave from subnet-
router anycast address unconditionally.

CC: Bjørn Mork <bjorn@mork.no>
CC: Brian Haley <brian.haley@hp.com>
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

IPv6 fragment identification generation is way beyond what we use for
IPv4 : It uses a single generator. Its not scalable and allows DOS
attacks.

Now inetpeer is IPv6 aware, we can use it to provide a more secure and
scalable frag ident generator (per destination, instead of system wide)

This patch :
1) defines a new secure_ipv6_id() helper
2) extends inet_getid() to provide 32bit results
3) extends ipv6_select_ident() with a new dest parameter
Reported-by: NFernando Gont <fernando@gont.com.ar>
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We currently cow metrics a bit too soon in IPv6 case : All routes are
tied to a single inetpeer entry.

Change ip6_rt_copy() to get destination address as second argument, so
that we fill rt6i_dst before the dst_copy_metrics() call.

icmp6_dst_alloc() must set rt6i_dst before calling dst_metric_set(), or
else the cow is done while rt6i_dst is still NULL.

If orig route points to readonly metrics, we can share the pointer
instead of performing the memory allocation and copy.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the future dst entries will be neigh-less.  In that environment we
need to have an easy transition point for current users of
dst->neighbour outside of the packet output fast path.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

dst_{get,set}_neighbour()
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It just makes it harder to see 1) what the code is doing
and 2) grep for all users of dst{->,.}neighbour
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This will get us closer to being able to do "neigh stuff"
completely independent of the underlying dst_entry for
protocols (ipv4/ipv6) that wish to do so.

We will also be able to make dst entries neigh-less.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It is always dev_queue_xmit().
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It's always dev_queue_xmit().
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now that there is a one-to-one correspondance between neighbour
and hh_cache entries, we no longer need:

1) dynamic allocation
2) attachment to dst->hh
3) refcounting

Initialization of the hh_cache entry is indicated by hh_len
being non-zero, and such initialization is always done with
the neighbour's lock held as a writer.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

RFC 6164 requires that routers MUST disable Subnet-Router anycast
for the prefix when /127 prefixes are used.

No need for matching code in addrconf_leave_anycast() as it
will silently ignore any attempt to leave an unknown anycast
address.
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Hi,

Reinhard Max also pointed out that the error should EAFNOSUPPORT according
to POSIX.

The Linux manpages have it as EINVAL, some other OSes (Minix, HPUX, perhaps BSD) use
EAFNOSUPPORT. Windows uses WSAEFAULT according to MSDN.

Other protocols error values in their af bind() methods in current mainline git as far
as a brief look shows:
	EAFNOSUPPORT: atm, appletalk, l2tp, llc, phonet, rxrpc
	EINVAL: ax25, bluetooth, decnet, econet, ieee802154, iucv, netlink, netrom, packet, rds, rose, unix, x25,
	No check?: can/raw, ipv6/raw, irda, l2tp/l2tp_ip

Ciao, Marcus
Signed-off-by: NMarcus Meissner <meissner@suse.de>
Cc: Reinhard Max <max@suse.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

IPV6, unlike IPV4, doesn't have a routing cache.

Routing table entries, as well as clones made in response
to route lookup requests, all live in the same table.  And
all of these things are together collected in the destination
cache table for ipv6.

This means that routing table entries count against the garbage
collection limits, even though such entries cannot ever be reclaimed
and are added explicitly by the administrator (rather than being
created in response to lookups).

Therefore it makes no sense to count ipv6 routing table entries
against the GC limits.

Add a DST_NOCOUNT destination cache entry flag, and skip the counting
if it is set.  Use this flag bit in ipv6 when adding routing table
entries.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This blows away any flags already set in the entry.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make the case labels the same indent as the switch.

git diff -w shows 80 column reflowing,
removal of a useless break after return, and moving
open brace after case instead of separate line.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Consider this scenario: When the size of the first received udp packet
is bigger than the receive buffer, MSG_TRUNC bit is set in msg->msg_flags.
However, if checksum error happens and this is a blocking socket, it will
goto try_again loop to receive the next packet.  But if the size of the
next udp packet is smaller than receive buffer, MSG_TRUNC flag should not
be set, but because MSG_TRUNC bit is not cleared in msg->msg_flags before
receive the next packet, MSG_TRUNC is still set, which is wrong.

Fix this problem by clearing MSG_TRUNC flag when starting over for a
new packet.
Signed-off-by: NXufeng Zhang <xufeng.zhang@windriver.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

udpv6_recvmsg() function is not using the correct variable to determine
whether or not the socket is in non-blocking operation, this will lead
to unexpected behavior when a UDP checksum error occurs.

Consider a non-blocking udp receive scenario: when udpv6_recvmsg() is
called by sock_common_recvmsg(), MSG_DONTWAIT bit of flags variable in
udpv6_recvmsg() is cleared by "flags & ~MSG_DONTWAIT" in this call:

    err = sk->sk_prot->recvmsg(iocb, sk, msg, size, flags & MSG_DONTWAIT,
                   flags & ~MSG_DONTWAIT, &addr_len);

i.e. with udpv6_recvmsg() getting these values:

	int noblock = flags & MSG_DONTWAIT
	int flags = flags & ~MSG_DONTWAIT

So, when udp checksum error occurs, the execution will go to
csum_copy_err, and then the problem happens:

    csum_copy_err:
            ...............
            if (flags & MSG_DONTWAIT)
                    return -EAGAIN;
            goto try_again;
            ...............

But it will always go to try_again as MSG_DONTWAIT has been cleared
from flags at call time -- only noblock contains the original value
of MSG_DONTWAIT, so the test should be:

            if (noblock)
                    return -EAGAIN;

This is also consistent with what the ipv4/udp code does.
Signed-off-by: NXufeng Zhang <xufeng.zhang@windriver.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Le jeudi 16 juin 2011 à 23:38 -0400, David Miller a écrit :
> From: Ben Hutchings <bhutchings@solarflare.com>
> Date: Fri, 17 Jun 2011 00:50:46 +0100
>
> > On Wed, 2011-06-15 at 04:15 +0200, Eric Dumazet wrote:
> >> @@ -1594,6 +1594,7 @@ int tcp_v4_do_rcv(struct sock *sk, struct sk_buff *skb)
> >>  			goto discard;
> >>
> >>  		if (nsk != sk) {
> >> +			sock_rps_save_rxhash(nsk, skb->rxhash);
> >>  			if (tcp_child_process(sk, nsk, skb)) {
> >>  				rsk = nsk;
> >>  				goto reset;
> >>
> >
> > I haven't tried this, but it looks reasonable to me.
> >
> > What about IPv6?  The logic in tcp_v6_do_rcv() looks very similar.
>
> Indeed ipv6 side needs the same fix.
>
> Eric please add that part and resubmit.  And in fact I might stick
> this into net-2.6 instead of net-next-2.6
>

OK, here is the net-2.6 based one then, thanks !

[PATCH v2] net: rfs: enable RFS before first data packet is received

First packet received on a passive tcp flow is not correctly RFS
steered.

One sock_rps_record_flow() call is missing in inet_accept()

But before that, we also must record rxhash when child socket is setup.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
CC: Tom Herbert <therbert@google.com>
CC: Ben Hutchings <bhutchings@solarflare.com>
CC: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: NDavid S. Miller <davem@conan.davemloft.net>

By default, when broadcast or multicast packet are sent from a local
application, they are sent to the interface then looped by the kernel
to other local applications, going throught netfilter hooks in the
process.

These looped packet have their MAC header removed from the skb by the
kernel looping code. This confuse various netfilter's netlink queue,
netlink log and the legacy ip_queue, because they try to extract a
hardware address from these packets, but extracts a part of the IP
header instead.

This patch prevent NFQUEUE, NFLOG and ip_QUEUE to include a MAC header
if there is none in the packet.
Signed-off-by: NNicolas Cavallari <cavallar@lri.fr>
Signed-off-by: NPatrick McHardy <kaber@trash.net>

The message size allocated for rtnl ifinfo dumps was limited to
a single page.  This is not enough for additional interface info
available with devices that support SR-IOV and caused a bug in
which VF info would not be displayed if more than approximately
40 VFs were created per interface.

Implement a new function pointer for the rtnl_register service that will
calculate the amount of data required for the ifinfo dump and allocate
enough data to satisfy the request.
Signed-off-by: NGreg Rose <gregory.v.rose@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch lowers the default initRTO from 3secs to 1sec per
RFC2988bis. It falls back to 3secs if the SYN or SYN-ACK packet
has been retransmitted, AND the TCP timestamp option is not on.

It also adds support to take RTT sample during 3WHS on the passive
open side, just like its active open counterpart, and uses it, if
valid, to seed the initRTO for the data transmission phase.

The patch also resets ssthresh to its initial default at the
beginning of the data transmission phase, and reduces cwnd to 1 if
there has been MORE THAN ONE retransmission during 3WHS per RFC5681.
Signed-off-by: NH.K. Jerry Chu <hkchu@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use same logic as SIT tunnel to handle link local address
for GRE tunnel. OSPFv3 requires link-local address to function.
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Same check as for IPv4, also do for IPv6.

(If you passed in a IPv4 sockaddr_in here, the sizeof check
 in the line before would have triggered already though.)
Signed-off-by: NMarcus Meissner <meissner@suse.de>
Cc: Reinhard Max <max@suse.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>