- 28 11月, 2017 25 次提交
-
-
由 Magnus Damm 提交于
Hook up the FCPF devices to allow use of FDP1 with IPMMU-VP. Signed-off-by: NMagnus Damm <damm+renesas@opensource.se> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au> Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
-
由 Magnus Damm 提交于
Hook up the FCPVD devices to allow use of the VSP and DU together with IPMMU-VI0. Signed-off-by: NMagnus Damm <damm+renesas@opensource.se> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au> Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
-
由 Magnus Damm 提交于
Hook up the FCPVD devices to allow use of the VSP and DU together with IPMMU-VI1 and IPMMU-VI1. Signed-off-by: NMagnus Damm <damm+renesas@opensource.se> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au> Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
-
由 Magnus Damm 提交于
Hook up r8a7795 ES2.0 Audio-DMAC nodes to the IPMMU-MP0. Hook up r8a7795 ES1.x Audio-DMAC nodes to the IPMMU-MP1. Signed-off-by: NMagnus Damm <damm+renesas@opensource.se> Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au> Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
-
由 Magnus Damm 提交于
Hook up r8a7795 SYS-DMAC nodes to the IPMMUs. In particular SYS-DMAC0 gets tied to IPMMU-DS0, and SYS-DMAC1 and SYS-DMAC2 get tied to IPMMU-DS1. Signed-off-by: NMagnus Damm <damm+renesas@opensource.se> Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au> Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
-
由 Magnus Damm 提交于
Add r8a7795 ES1.x IPMMU nodes and keep all disabled by default. This is a follow-up to a patch that adds IPMMU device nodes that are common to r8a7795 ES1.x and ES2.0 Power domains are omitted as they appear to be undocumented. Signed-off-by: NMagnus Damm <damm+renesas@opensource.se> Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au> Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
-
由 Magnus Damm 提交于
Add r8a7795 IPMMU nodes and keep all disabled by default. This includes all IPMMU devices for r8a7795 ES2.0. Those not present in r8a7795 ES1.x are removed from the DT for those SoCs using delete-node. A follow-up patch will add IPMMU devices to ES1.x which are not also present in ES2.0. Signed-off-by: NMagnus Damm <damm+renesas@opensource.se> Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au> Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
-
由 Ulrich Hecht 提交于
R-Car D3 has only one SDHI controller. Signed-off-by: NUlrich Hecht <ulrich.hecht+renesas@gmail.com> Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Ulrich Hecht 提交于
Differs from other Gen3 SoCs in that each controller only supports eight channels. Signed-off-by: NUlrich Hecht <ulrich.hecht+renesas@gmail.com> Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Vladimir Barinov 提交于
ULCB-KF has a USB2.0 dual-role channel (CN13). This adds dr_mode property for USB2.0 channel 0 (EHCI/OHCI and HS-USB) as "otg". Signed-off-by: NVladimir Barinov <vladimir.barinov@cogentembedded.com> Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Vladimir Barinov 提交于
This supports USB2 PHY channel #0 on ULCB Kingfisher board The dedicated USB0_PWEN pin is used to control CN13 VBUS source from U43 power supply. MAX3355 can also provide VBUS, hence it should be disabled via OTG_OFFVBUSn node coming from gpio expander TCA9539. Set MAX3355 enabled using OTG_EXTLPn node to be able to read OTG ID of CN13. Signed-off-by: NVladimir Barinov <vladimir.barinov@cogentembedded.com> Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Magnus Damm 提交于
Enable the r8a7795 device nodes for IPMMU-DS0, IPMMU-DS1, IPMMU-MP, IPMMU-VI0, IPMMU-VC0 and the shared IPMMU-MM device. Signed-off-by: NMagnus Damm <damm+renesas@opensource.se> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au> Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
-
由 Simon Horman 提交于
Add IPMMU-DS0 to the Ethernet-AVB device node. Based on work by Magnus Damm for the r8a7795. Signed-off-by: NSimon Horman <horms+renesas@verge.net.au> Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
-
由 Simon Horman 提交于
Hook up the FCPVI devices to allow use of VSPI with IPMMU-VC0. Based on work for the r8a7795 by Magnus Damm. Signed-off-by: NSimon Horman <horms+renesas@verge.net.au> Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
-
由 Simon Horman 提交于
Hook up the FCPF devices to allow use of FDP1 with IPMMU-VI0. Based on work by Magnus Damm for the r8a7795. Signed-off-by: NSimon Horman <horms+renesas@verge.net.au> Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
-
由 Simon Horman 提交于
Hook up r8a7796 Audio-DMAC nodes to the IPMMU-MP. Based on work for the r8a7795 by Magnus Damm. Signed-off-by: NSimon Horman <horms+renesas@verge.net.au> Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
-
由 Magnus Damm 提交于
Hook up r8a7796 DMAC nodes to the IPMMUs. In particular SYS-DMAC0 gets tied to IPMMU-DS0, and SYS-DMAC1 and SYS-DMAC2 get tied to IPMMU-DS1. Signed-off-by: NMagnus Damm <damm+renesas@opensource.se> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au> Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
-
由 Magnus Damm 提交于
Add r8a7796 IPMMU nodes and keep all disabled by default. Signed-off-by: NMagnus Damm <damm+renesas@opensource.se> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au> Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
-
由 Geert Uytterhoeven 提交于
Add initial support for the Renesas Salvator-XS (Salvator-X 2nd version) development board equipped with an R-Car M3-W SiP. Based on work for the Salvator-X and -XS boards with M3-W resp. H3 SiPs. Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Geert Uytterhoeven 提交于
Enable the Watchdog Timer (WDT) controller on the Renesas Eagle board equipped with an R-Car V3M (r8a77970) SoC. Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Geert Uytterhoeven 提交于
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Geert Uytterhoeven 提交于
Add a device node for the Watchdog Timer (WDT) controller on the Renesas R-Car V3M (r8a77970) SoC. Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Simon Horman 提交于
Use newly added R-Car SDHI Gen3 fallback compat string in the DT of the r8a7796 SoC. This should have no run-time effect as the driver matches against the per-SoC compat string before considering the fallback compat string. Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Simon Horman 提交于
Use newly added R-Car SDHI Gen3 fallback compat string in the DT of the r8a7795 SoC. This should have no run-time effect as the driver matches against the per-SoC compat string before considering the fallback compat string. Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Wolfram Sang 提交于
These boards are known to have eMMC issues with the default driver type. Specify a working one. Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
- 17 11月, 2017 1 次提交
-
-
由 Masahiro Yamada 提交于
Commit 429f203e ("arm64: dts: uniphier: route on-board device IRQ to GPIO controller") missed to update this DTS. It becames a real problem when arm and arm64 trees are merged together. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
- 10 11月, 2017 1 次提交
-
-
由 Masahiro Yamada 提交于
If CONFIG_OF_ALL_DTBS is enabled, "make ARCH=arm64 dtbs" compiles each DTB twice; one from arch/arm64/boot/dts/*/Makefile and the other from the dtb-$(CONFIG_OF_ALL_DTBS) line in arch/arm64/boot/dts/Makefile. It could be a race problem when building DTBS in parallel. Another minor issue is CONFIG_OF_ALL_DTBS covers only *.dts in vendor sub-directories, so this broke when Broadcom added one more hierarchy in arch/arm64/boot/dts/broadcom/<soc>/. One idea to fix the issues in a clean way is to move DTB handling to Kbuild core scripts. Makefile.dtbinst already recognizes dtb-y natively, so it should not hurt to do so. Add $(dtb-y) to extra-y, and $(dtb-) as well if CONFIG_OF_ALL_DTBS is enabled. All clutter things in Makefiles go away. As a bonus clean-up, I also removed dts-dirs. Just use subdir-y directly to traverse sub-directories. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Acked-by: NArnd Bergmann <arnd@arndb.de> [robh: corrected BUILTIN_DTB to CONFIG_BUILTIN_DTB] Signed-off-by: NRob Herring <robh@kernel.org>
-
- 09 11月, 2017 2 次提交
-
-
由 Masahiro Yamada 提交于
We need to add "clean-files" in Makfiles to clean up DT blobs, but we often miss to do so. Since there are no source files that end with .dtb or .dtb.S, so we can clean-up those files from the top-level Makefile. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NRob Herring <robh@kernel.org>
-
由 Masahiro Yamada 提交于
Most of DT files are compiled under arch/*/boot/dts/, but we have some other directories, like drivers/of/unittest-data/. We often miss to add gitignore patterns per directory. Since there are no source files that end with .dtb or .dtb.S, we can ignore the patterns globally. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: NRob Herring <robh@kernel.org>
-
- 04 11月, 2017 1 次提交
-
-
由 Andreas Färber 提交于
Give the serial driver a fixed-clock as input for baudrate 115200. Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
- 02 11月, 2017 3 次提交
-
-
由 Chaotian Jing 提交于
devicetree bindings has been updated to support multi-platforms, so that each platform has its owns compatible name. And, this compatible name may used in driver to distinguish with other platform. Signed-off-by: NChaotian Jing <chaotian.jing@mediatek.com> Tested-by: NSean Wang <sean.wang@mediatek.com> Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org> Acked-by: NMatthias Brugger <matthias.bgg@gmail.com>
-
由 Greg Kroah-Hartman 提交于
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org> Reviewed-by: NPhilippe Ombredanne <pombredanne@nexb.com> Reviewed-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Corentin Labbe 提交于
The original dwmac-sun8i DT bindings have some issue on how to handle integrated PHY and was reverted in last RC of 4.13. But now we have a solution so we need to get back that was reverted. This patch restore arm64 DT about dwmac-sun8i for H5 This reverts a part of commit 87e1f5e8 ("arm64: dts: allwinner: Revert EMAC changes") Signed-off-by: NCorentin Labbe <clabbe.montjoie@gmail.com> Acked-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
- 31 10月, 2017 2 次提交
-
-
由 Corentin Labbe 提交于
stmmac bindings docs said that its mdio node must have compatible = "snps,dwmac-mdio"; Since dwmac-sun8i does not have any good reasons to not doing it, all their MDIO node must have it. Signed-off-by: NCorentin Labbe <clabbe.montjoie@gmail.com> Acked-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
由 Corentin Labbe 提交于
The original dwmac-sun8i DT bindings have some issue on how to handle integrated PHY and was reverted in last RC of 4.13. But now we have a solution so we need to get back that was reverted. This patch restore arm64 DT about dwmac-sun8i for A64 This reverts commit 87e1f5e8 ("arm64: dts: allwinner: Revert EMAC changes") Signed-off-by: NCorentin Labbe <clabbe.montjoie@gmail.com> Acked-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
- 30 10月, 2017 4 次提交
-
-
由 Miquel Raynal 提交于
Fill ESPRESSObin uart0 node with pinctrl information like in the Armada-3720-DB device tree (which uses the same node). Also explain how to enable the second UART port available on the headers. This second port is not enabled by default because both headers are dedicated to expose general purpose pins and remapping some of them to use the second UART would break existing users. Suggested-by: NLászló ÁSHIN <laszlo@ashin.hu> Signed-off-by: NMiquel Raynal <miquel.raynal@free-electrons.com> Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com>
-
由 Miquel Raynal 提交于
Enable Armada-3720-DB second UART port by adding the corresponding device tree node in the board DTS and enabling it. Signed-off-by: NMiquel Raynal <miquel.raynal@free-electrons.com> Acked-by: NGregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com>
-
由 Miquel Raynal 提交于
Add a node in Armada 37xx DTSI file for the second UART, with a different compatible due to its extended IP which has some differences with the first UART already in place. Make use of this commit to also fully describe the first port and use the same clear and named interrupt bindings for both ports. The standard UART (UART0) uses level-interrupts while the extended UART (UART1) uses edge-triggered interrupts. Signed-off-by: NMiquel Raynal <miquel.raynal@free-electrons.com> Acked-by: NGregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com>
-
由 Miquel Raynal 提交于
Add the missing clock property to armada-3700 UART node. This clock will be used to derive the prescaler value to comply with the requested baudrate. Signed-off-by: NMiquel Raynal <miquel.raynal@free-electrons.com> Acked-by: NGregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com>
-
- 29 10月, 2017 1 次提交
-
-
由 Jerome Brunet 提交于
Add the external PHY interrupt on the nanopi-k2, odroid-c2, p200, p230 and q200 Signed-off-by: NJerome Brunet <jbrunet@baylibre.com> Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com> Signed-off-by: NKevin Hilman <khilman@baylibre.com>
-