Use is_power_of_2() instead of hard coding it in the driver. While at it,
fix the meaningless error print.
Signed-off-by: NGal Pressman <galpress@amazon.com>
Acked-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Avoid that sparse reports the following for the mlx5 driver:

drivers/infiniband/hw/mlx5/qp.c:2671:34: warning: invalid assignment: |=
drivers/infiniband/hw/mlx5/qp.c:2671:34:    left side has type restricted __be32
drivers/infiniband/hw/mlx5/qp.c:2671:34:    right side has type int
drivers/infiniband/hw/mlx5/qp.c:2679:34: warning: invalid assignment: |=
drivers/infiniband/hw/mlx5/qp.c:2679:34:    left side has type restricted __be32
drivers/infiniband/hw/mlx5/qp.c:2679:34:    right side has type int
drivers/infiniband/hw/mlx5/qp.c:2680:34: warning: invalid assignment: |=
drivers/infiniband/hw/mlx5/qp.c:2680:34:    left side has type restricted __be32
drivers/infiniband/hw/mlx5/qp.c:2680:34:    right side has type int
drivers/infiniband/hw/mlx5/qp.c:2684:34: warning: invalid assignment: |=
drivers/infiniband/hw/mlx5/qp.c:2684:34:    left side has type restricted __be32
drivers/infiniband/hw/mlx5/qp.c:2684:34:    right side has type int
drivers/infiniband/hw/mlx5/qp.c:2686:28: warning: cast from restricted __be32
drivers/infiniband/hw/mlx5/qp.c:2686:28: warning: incorrect type in argument 1 (different base types)
drivers/infiniband/hw/mlx5/qp.c:2686:28:    expected unsigned int [usertype] val
drivers/infiniband/hw/mlx5/qp.c:2686:28:    got restricted __be32 [usertype]
drivers/infiniband/hw/mlx5/qp.c:2686:28: warning: cast from restricted __be32
drivers/infiniband/hw/mlx5/qp.c:2686:28: warning: cast from restricted __be32
drivers/infiniband/hw/mlx5/qp.c:2686:28: warning: cast from restricted __be32
drivers/infiniband/hw/mlx5/qp.c:2686:28: warning: cast from restricted __be32

This patch does not change any functionality.

Fixes: a60109dc ("IB/mlx5: Add support for extended atomic operations")
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Acked-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Query all per transport caps for XRC and set the appropriate bits in the
per transport field of the advertised struct.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Reviewed-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

ODP support in SRQ is per transport capability. Based on device
capabilities set this flag in device structure for future queries.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Reviewed-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Add changes to the WQE page-fault handler to

1. Identify that the event is for a SRQ WQE
2. Pass SRQ object instead of a QP to the function that reads the WQE
3. Parse the SRQ WQE with respect to its structure

The rest is handled as for regular RQ WQE.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Reviewed-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Reading a WQE from SRQ is almost identical to reading from regular RQ.
The differences are the size of the queue, the size of a WQE and buffer
location.

Make necessary changes to mlx5_ib_read_user_wqe() to let it read a WQE
from a SRQ or RQ by caller choice.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Reviewed-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Skip XRC segment in the beginning of a send WQE and fetch ODP XRC
capabilities when QP type is IB_QPT_XRC_INI. The rest of the handling is
the same as in RC QP.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Reviewed-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

In the function mlx5_ib_mr_responder_pfault_handler()

1. The parameter wqe is used as read-only so there is no need to pass it
   by reference.
2. Remove the unused argument pfault from list of arguments.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Reviewed-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

When handling an ODP event for a receive WQE in SRQ the target QP is
unknown. Therefore, it is wrong to ask if QP has a SRQ in the page-fault
handler.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Reviewed-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

QP and SRQ objects are stored in different containers so the action to get
and lock a common resource during ODP event needs to address that.

While here get rid of 'refcount' and 'free' fields in mlx5_core_srq struct
and use the fields with same semantics in common structure.

Fixes: 032080ab ("IB/mlx5: Lock QP during page fault handling")
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Reviewed-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

When a given netdev of the GID entry is macvlan netdevice, and if the
lower netdevice is vlan device, GID entry for macvlan based IP address
needs to inherit the vlan of the lower netdevice.

Therefore, attempt to find out if the lower device exist and if so, if
it is vlan device and setup the vlan tag correctly.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NMark Bloch <markb@mellanox.com>
Reviewed-by: NYuval Avnery <yuvalav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

All callers to ib_alloc_device() provide a larger size than struct
ib_device and rely on the fact that struct ib_device is embedded in their
driver specific structure as the first member.

Provide a safer variant of ib_alloc_device() that checks and enforces this
approach to make sure the drivers are using it right.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Remove 'del_mkey' variable that is set but not used.

Fixes: 534fd7aa ("IB/mlx5: Manage indirection mkey upon DEVX flow for ODP")
Signed-off-by: NKamal Heib <kamalheib1@gmail.com>
Acked-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The function mlx5_ib_stage_odp_cleanup() is only used in main.c

Fixes: d5d284b8 ("{net,IB}/mlx5: Move Page fault EQ and ODP logic to RDMA")
Signed-off-by: NKamal Heib <kamalheib1@gmail.com>
Acked-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Implement DEVX hot unplug for the async command FD.

This is done by managing a list of the inflight commands and wait until
all launched work is completed as part of
devx_hot_unplug_async_cmd_event_file.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Implement the file ops of the DEVX async command FD, this enables using
the FD for reading the events and manage other options on the FD.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Introduce async DEVX obj query API to get the command response back to
user space once it's ready without blocking when calling the firmware.

The event's data includes a header with some meta data then the firmware
output command data.

The header includes:
- The input 'wr_id' to let application recognizing the response.

The input FD attribute is used to have the event data ready on.
Downstream patches from this series will implement the file ops to let
application read it.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Introduce MLX5_IB_OBJECT_DEVX_ASYNC_CMD_FD and its initial implementation.

This object is from type class FD and will be used to read DEVX async
commands completion.

The core layer should allow the driver to set object from type FD in a
safe mode, this option was added with a matching comment in place.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The intention of the flow_is_supported was to disable the entire tree and
methods that allow raw flow creation, but the grammar syntax has this
disable the entire UVERBS_FLOW object. Since the method requires a
MLX5_IB_OBJECT_FLOW_MATCHER there is no need to do anything, as it is
automatically disabled when matchers are disabled.

This restores the ability to create flow steering rules on representors
via regular verbs.

Fixes: a1462351 ("RDMA/mlx5: Fail early if user tries to create flows on IB representors")
Signed-off-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

A sub-range in ODP implicit MR should take its write permission from the
MR and not be set always to allow.

Fixes: d07d1d70 ("IB/umem: Update on demand page (ODP) support")
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Reviewed-by: NArtemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

This patch avoids that sparse complains about missing function
declarations.

Fixes: c9990ab3 ("RDMA/umem: Move all the ODP related stuff out of ucontext and into per_mm")
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Acked-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

APIs that have deferred callbacks should have some kind of cleanup
function that callers can use to fence the callbacks. Otherwise things
like module unloading can lead to dangling function pointers, or worse.

The IB MR code is the only place that calls this function and had a
really poor attempt at creating this fence. Provide a good version in
the core code as future patches will add more places that need this
fence.
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

Two flow specifications can set the ip protocol field in
the flow table entry:

1) IB_FLOW_SPEC_TCP/UDP/GRE - set the ip protocol accordingly.
2) IB_FLOW_SPEC_IPV4/6 - has ip_protocol field for users
who want to receive specific L4 packets.

We need to avoid overriding of the ip_protocol with zeros,
in case that the user first put the L4 specification and
only then the L3.

Fixes: ca0d4753 ('IB/mlx5: Add support in TOS and protocol to flow steering')
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Add support for ODP for DEVX indirection mkey, it includes:
- Recognizing its type as part of the radix tree lookup.
- Use similar flow as done for the MW MKEY type.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Reviewed-by: NArtemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Manage indirection mkey upon DEVX flow to support ODP.

To support a page fault event on the indirection mkey it needs to be part
of the device mkey radix tree.

Both the creation and the deletion flows for a DEVX object which is
indirection mkey were adapted to handle that.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Reviewed-by: NArtemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Once an indirection MKEY is created umem valid bit shouldn't be set as
this MKEY doesn't really hold a umem.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Reviewed-by: NArtemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Work must hold a kref on the ib_device otherwise the dev pointer can
become free before the work runs. This can happen because the work is
being pushed onto the system work queue which is not flushed during driver
unregister.

Remove the bogus use of 'reg_state':
 - While in uverbs the reg_state is guaranteed to always be
   REGISTERED
 - Testing reg_state with no locking is bogus. Use ib_device_try_get()
   to get back into a region that prevents unregistration.

For now continue with a flow that is similar to the existing code.

Fixes: 813e90b1 ("IB/mlx5: Add advise_mr() support")
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Reviewed-by: NMoni Shoua <monis@mellanox.com>

When the flags verification was added two flags were missed from the
check:
 * MLX5_QP_FLAG_TIR_ALLOW_SELF_LB_UC
 * MLX5_QP_FLAG_TIR_ALLOW_SELF_LB_MC

This causes user applications that were using these flags to break.

Fixes: 2e43bb31 ("IB/mlx5: Verify that driver supports user flags")
Signed-off-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Replace kzalloc() function with its 2-factor argument form, kcalloc().

This patch replaces cases of:

	kzalloc(a * b, gfp)

with:
	kcalloc(a, b, gfp)

This code was detected with the help of Coccinelle.
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Management Datagram Interface (MAD) is applicable
only when physical port is Infiniband. It makes MAD
command logic to be completely unrelated to eth/core
parts of mlx5.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Acked-by: NJason Gunthorpe <jgg@mellanox.com>

Introduce and use rdma_device_to_ibdev() API for those drivers which are
registering one sysfs group and also use in ib_core.

In subsequent patch, device->provider_ibdev one-to-one mapping is no
longer holds true during accessing sysfs entries.
Therefore, introduce an API rdma_device_to_ibdev() that provides such
information.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Most provider routines are callback routines which ib core invokes.
_callback suffix doesn't convey information about when such callback is
invoked. Therefore, rename port_callback to init_port.

Additionally, store the init_port function pointer in ib_device_ops, so
that it can be accessed in subsequent patches when binding rdma device to
net namespace.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

As part of an audit process to update drivers to use rdma_restrack_add()
ensure that PD objects is cleared before access.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

ib_umem_get() can only be called in a method callback, which always has a
udata parameter. This allows ib_umem_get() to derive the ucontext pointer
directly from the udata without requiring the drivers to find it in some
way or another.
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NShamir Rabinovitch <shamir.rabinovitch@oracle.com>

The next patch will add dependency from ib_umem_get in to ib_uverbs so
move the required ib_umem_xxx functionality to it's correct module -
ib_uverbs - and avoid circular dependecy from the form of ib_core ->
ib_uverbs -> ib_core in depmod.

Since this now requires all drivers to be build modular if uverbs is
modular, hoist the test a couple drivers had into the main kconfig and
apply it to all drivers uniformly.
Signed-off-by: NShamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Convert various places to more readable code, which embeds
CONFIG_INFINIBAND_ON_DEMAND_PAGING into the code flow.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Consolidate various checks if MR is ODP backed to one simple helper and
update call sites to use it.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Device capability bits are exposing what specific device supports from HW
perspective. Those bits are not dependent on kernel configurations and
RDMA/core should ensure that proper interfaces to users will be disabled
if CONFIG_INFINIBAND_ON_DEMAND_PAGING is not set.

Fixes: f4056bfd ("IB/core: Add on demand paging caps to ib_uverbs_ex_query_device")
Fixes: 8cdd312c ("IB/mlx5: Implement the ODP capability query verb")
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

CONFIG_INFINIBAND_ON_DEMAND_PAGING is used in general structures to
micro-optimize the memory footprint. Remove it, so it will allow us to
simplify various ODP device flows.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>