- 30 5月, 2009 3 次提交
-
-
由 Catalin Marinas 提交于
This patch adds a Kconfig option for specifying whether Linux will only be run in secure mode on the RealView PB1176 platform. Enabling it will make the secure flash memory block (64MB @ 0x3c000000) available to Linux. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Colin Tuckley 提交于
This is a RealView platform supporting core tiles with ARM11MPCore, Cortex-A8 or Cortex-A9 (multicore) processors. It has support for MMC, CompactFlash, PCI-E. Signed-off-by: NColin Tuckley <colin.tuckley@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Catalin Marinas 提交于
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
- 19 5月, 2009 2 次提交
-
-
由 Rabin Vincent 提交于
Remove the __initdata annotation for the clock lookups, since they will be needed when loading modules which use clk_get(). Signed-off-by: NRabin Vincent <rabin@rab.in> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Rabin Vincent 提交于
Remove the __initdata annotation for the clock lookups, since they will be needed when loading modules which use clk_get(). Signed-off-by: NRabin Vincent <rabin@rab.in> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 18 5月, 2009 3 次提交
-
-
由 Pavel Roskin 提交于
Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Mel Gorman 提交于
pfn_valid() is meant to be able to tell if a given PFN has valid memmap associated with it or not. In FLATMEM, it is expected that holes always have valid memmap as long as there is valid PFNs either side of the hole. In SPARSEMEM, it is assumed that a valid section has a memmap for the entire section. However, ARM and maybe other embedded architectures in the future free memmap backing holes to save memory on the assumption the memmap is never used. The page_zone linkages are then broken even though pfn_valid() returns true. A walker of the full memmap must then do this additional check to ensure the memmap they are looking at is sane by making sure the zone and PFN linkages are still valid. This is expensive, but walkers of the full memmap are extremely rare. This was caught before for FLATMEM and hacked around but it hits again for SPARSEMEM because the page_zone linkages can look ok where the PFN linkages are totally screwed. This looks like a hatchet job but the reality is that any clean solution would end up consumning all the memory saved by punching these unexpected holes in the memmap. For example, we tried marking the memmap within the section invalid but the section size exceeds the size of the hole in most cases so pfn_valid() starts returning false where valid memmap exists. Shrinking the size of the section would increase memory consumption offsetting the gains. This patch identifies when an architecture is punching unexpected holes in the memmap that the memory model cannot automatically detect and sets ARCH_HAS_HOLES_MEMORYMODEL. At the moment, this is restricted to EP93xx which is the model sub-architecture this has been reported on but may expand later. When set, walkers of the full memmap must call memmap_valid_within() for each PFN and passing in what it expects the page and zone to be for that PFN. If it finds the linkages to be broken, it assumes the memmap is invalid for that PFN. Signed-off-by: NMel Gorman <mel@csn.ul.ie> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Having discussed broadcast tick support with Thomas Glexiner, the broadcast tick devices should be registered with a higher rating than the global tick device, and it should have the ONESHOT and PERIODIC feature flags set. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Acked-by: NThomas Glexiner <tglx@linutronix.de>
-
- 17 5月, 2009 4 次提交
-
-
由 Russell King 提交于
smp_cross_call_done() is a no-op for MPCore, and since it's only used by platform code, there's no point in having it unless it's doing something. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
The ARM SMP code wasn't properly updated for the cpumask changes, which results in smp_timer_broadcast() broadcasting ticks to non-online CPUs. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ricardo Martins 提交于
Compilation for this board yields the following errors: arch/arm/mach-pxa/viper.c:511: error: 'FFUART' undeclared here (not in a function) arch/arm/mach-pxa/viper.c:520: error: 'BTUART' undeclared here (not in a function) arch/arm/mach-pxa/viper.c:529: error: 'STUART' undeclared here (not in a function) Fix them by including the necessary header. Signed-off-by: NRicardo Martins <rasm@fe.up.pt> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Hartley Sweeten 提交于
Fix the clkdev API support for the ep93xx uart clocks. The uarts available in the ep93xx have individual clock controls. The current implementation assumes that the bootloader has enabled the clocks before the kernel has booted. It also assumes that the bootloader has set the UARTBAUD bit indicating that the uarts are running off the 14.7456MHz external crystal. This fixes both issues. It also allows the uart clocks to be stopped when there are no users. Tested-by: NMatthias Kaehlcke <matthias@kaehlcke.net> Cc: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 16 5月, 2009 3 次提交
-
-
由 Tony Lindgren 提交于
This makes the framebuffer work on omap3. Also fix the clk_get usage for checkpatch.pl "ERROR: do not use assignment in if condition". Cc: Imre Deak <imre.deak@nokia.com> Cc: linux-fbdev-devel@lists.sourceforge.net Acked-by: NKrzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Kalle Jokiniemi 提交于
The OMAP3430ES2_SAVEANDRESTORE_SHIFT macro is used by powerdomain code in "1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT" manner, but the definition was also (1 << 4), meaning we actually modified bit 16. So the definition needs to be 4. This fixes also a cold reset HW bug in OMAP3430 ES3.x where some of the efuse bits are not isolated during wake-up from off mode. This can cause randomish cold resets with off mode. Enabling the USBTLL hardware SAVEANDRESTORE causes the core power up assert to be delayed in a way that we will not get faulty values when boot ROM is reading the unisolated registers. Signed-off-by: NKalle Jokiniemi <kalle.jokiniemi@digia.com> Acked-by: NKevin Hilman <khilman@deeprootsystems.com> Acked-by: NPaul Walmsley <paul@pwsan.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Vikram Pandita 提交于
As per 3430 TRM, there are 6 banks [0 to 191] Signed-off-by: NTom Rix <Tom.Rix@windriver.com> Signed-off-by: NVikram Pandita <vikram.pandita@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 15 5月, 2009 8 次提交
-
-
由 Ben Dooks 提交于
The s3c24xx_register_clock() function has been doing a test on clk->owner to see if it is NULL, and then setting itself as the owner if clk->owner == NULL. This is not needed, arch/arm/plat-s3c/clock.c cannot be compiled as a module, and even if it was, it should not be playing with this field if it being registered from somewhere else. The best course of action is to remove this bit of code completely. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
The BAST support code is calling s3c_i2c0_set_platdata() from the map_io() entry, instead of the bast_init() code. This causes the registration to fail due to kmalloc() not being available at the time. This fixes the following error: s3c_i2c0_set_platdata: no memory for platform data Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Fix unused code warning in arch/arm/plat-s3c24xx/dma.c if there is no PM support enabled. The function to_dma_chan() should be marked inline so that the compiler will eliminate it without warning if it isn't used. arch/arm/plat-s3c24xx/dma.c:1239: warning: 'to_dma_chan' defined but not used Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Marek Szyprowski 提交于
Fix compilation bug when debug was enabled Reviewed-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Marek Szyprowski 提交于
Cleanup arm/plat-s3c64xx/include/plat/gpio-bank-h.h include file. Using shift-left operation with value >32 is a bad habit. Reviewed-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
The symbol 'floatx80_is_nan' prototype was defined locally in fpa11_cprt.c when it was built outside the file in softfloat-specialisze. Move this into softfloat.h to fix the following sparse warning: softfloat-specialize:276:6: warning: symbol 'floatx80_is_nan' was not declared. Should it be static? Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Add header file decleration for 'ExtendedCPDO' in fpa11.h to stop the following sparse warning: extended_cpdo.c:90:14: warning: symbol 'ExtendedCPDO' was not declared. Should it be static? Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 David Brownell 提交于
This is a build fix, resyncing the DaVinci EVM ASoC board code with the version in the DaVinci tree. That resync includes support for the DM355 EVM, although that board isn't yet in mainline. (NOTE: also includes a bugfix to the platform_add_resources call, recently sent by Chaithrika U S <chaithrika@ti.com> but not yet merged into the DaVinci tree.) Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 13 5月, 2009 4 次提交
-
-
由 Tony Lindgren 提交于
With the clkdev, musb_core.c needs to register clock with name "ick". Once all the platforms using the musb driver have been converted to use clockdev, the clock name does not need to be passed from the low-level init code. Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Jarkko Nikula 提交于
SPI driver will do unhandled fault on OMAP2420 if trying to probe non-existing SPI busses. Register those additional busses runtime only for cpus having them. Signed-off-by: NJarkko Nikula <jhnikula@gmail.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Jarkko Nikula 提交于
Fix "tusb6010 init error 5, -19" and compilation warning from function tusb6010_platform_retime "warning: 'sysclk_ps' is used uninitialized in this function". I suppose commit c094ba34b8f780885d029ce3c2715a194b780e5d was meant to test for zero fclk_ps instead of sysclk_ps. Signed-off-by: NJarkko Nikula <jarkko.nikula@nokia.com> Cc: Roel Kluin <roel.kluin@gmail.com> Tested-by: NKalle Valo <kalle.valo@iki.fi> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Paul Walmsley 提交于
GPIO de-bounce clocks don't have any impact on the module idle state, so the clock code should not wait for the module to enable after the de-bounce clocks are enabled. Problem found by Kevin Hilman <khilman@deeprootsystems.com>. Signed-off-by: NPaul Walmsley <paul@pwsan.com> Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 12 5月, 2009 1 次提交
-
-
由 Tomi Valkeinen 提交于
Print reserved memory only if it was actually reserved. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 09 5月, 2009 1 次提交
-
-
由 Krzysztof Hałasa 提交于
ENOSYS makes modutils complain about missing kernel module support. Signed-off-by: NKrzysztof Hałasa <khc@pm.waw.pl>
-
- 08 5月, 2009 1 次提交
-
-
由 Paul Gortmaker 提交于
From: Bruce Ashfield <bruce.ashfield@windriver.com> To fully support the armv7-a instruction set/optimizations, support for the R_ARM_MOVW_ABS_NC and R_ARM_MOVT_ABS relocation types is required. The MOVW and MOVT are both load-immediate instructions, MOVW loads 16 bits into the bottom half of a register, and MOVT loads 16 bits into the top half of a register. The relocation information for these instructions has a full 32 bit value, plus an addend which is stored in the 16 immediate bits in the instruction itself. The immediate bits in the instruction are not contiguous (the register # splits it into a 4 bit and 12 bit value), so the addend has to be extracted accordingly and added to the value. The value is then split and put into the instruction; a MOVW uses the bottom 16 bits of the value, and a MOVT uses the top 16 bits. Signed-off-by: NDavid Borman <david.borman@windriver.com> Signed-off-by: NBruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 07 5月, 2009 1 次提交
-
-
由 Kevin Hilman 提交于
As per commit 284901a9, use DMA_BIT_MASK(n) Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 05 5月, 2009 9 次提交
-
-
由 Magnus Lilja 提交于
The i.MX31 ARM11 core is not a v6K core. Disable this option as it is incompatible with non v6K cores. Signed-off-by: NMagnus Lilja <lilja.magnus@gmail.com> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
由 Uwe Kleine-König 提交于
Before this patch I got the following line in my dmesg: [ 0.000000] BUG: mapping for 0xd4000000 at 0xeb000000 overlaps vmalloc space VMALLOC_END is 0xf4000000 and there are the following other mappings defined for mx27ads: (0xa0500000,+0x00001000) maps to 0xffff0000 (0x10000000,+0x00100000) maps to 0xf4000000 (0x80000000,+0x00100000) maps to 0xf4100000 (0xd8000000,+0x00100000) maps to 0xf4200000 So map PBC to 0xf4300000. Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
由 Sascha Hauer 提交于
On i.MX31 I sometimes get spurious interrupts. There is no need to crash the whole system when this happens. Instead, silently ignore it. Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
由 Valentin Longchamp 提交于
We want to have a mx31_defconfig file that builds a kernel that is able to boot on all support mx31 systems and thus also can be better tested by automatic build scripts. For these reasons, this config file is not needed anymore. Signed-off-by: NValentin Longchamp <valentin.longchamp@epfl.ch> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
由 Guennadi Liakhovetski 提交于
All i.MX platforms support <linux/clk.h> calls and should select HAVE_CLK. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
由 Martin Fuzzey 提交于
On MX2 platforms imx_dma_request() calls request_irq() which may sleep with interrupts disabled. Signed-off-by: NMartin Fuzzey <mfuzzey@gmail.com> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
由 Martin Fuzzey 提交于
The sequence imx_dma_request() imx_dma_enable() imx_dma_free() left the dma channel in_use mode and did not release the timer. Signed-off-by: NMartin Fuzzey <mfuzzey@gmail.com> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
由 Nicolas Pitre 提交于
Signed-off-by: NNicolas Pitre <nico@marvell.com>
-
由 Nicolas Pitre 提交于
Signed-off-by: NNicolas Pitre <nico@marvell.com>
-