Now that we have locking hierarchy of sched_engine->lock ->
ce->guc_state everything from guc_active can be moved into guc_state and
protected the guc_state.lock.
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-23-matthew.brost@intel.com

To make ownership of locking clear move fields (guc_id, guc_id_ref,
guc_id_link) to sub structure guc_id in intel_context.
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-22-matthew.brost@intel.com

Move GuC management fields in context under guc_active struct as this is
where the lock that protects theses fields lives. Also only set guc_prio
field once during context init.

v2:
 (Daniele)
  - set CONTEXT_SET_INIT
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-21-matthew.brost@intel.com

Drop pin count check trick between a sched_disable and re-pin, now rely
on the lock and counter of the number of committed requests to determine
if scheduling should be disabled on the context.
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-20-matthew.brost@intel.com

Lock the xarray and take ref to the context if needed.

v2:
 (Checkpatch)
  - Add new line after declaration
 (Daniel Vetter)
  - Correct put / get accounting in xa_for_loops
v3:
 (Checkpatch)
  - Extra new line
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-19-matthew.brost@intel.com

Rework and simplify the locking with GuC subission. Drop
sched_state_no_lock and move all fields under the guc_state.sched_state
and protect all these fields with guc_state.lock . This requires
changing the locking hierarchy from guc_state.lock -> sched_engine.lock
to sched_engine.lock -> guc_state.lock.

v2:
 (Daniele)
  - Don't check fields outside of lock during sched disable, check less
    fields within lock as some of the outside are no longer needed
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-18-matthew.brost@intel.com

Move guc_blocked fence to struct guc_state as the lock which protects
the fence lives there.

s/ce->guc_blocked/ce->guc_state.blocked/g

v2:
 (Daniele)
  - s/blocked_fence/blocked/g
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-17-matthew.brost@intel.com

A subsequent patch will flip the locking hierarchy from
ce->guc_state.lock -> sched_engine->lock to sched_engine->lock ->
ce->guc_state.lock. As such we need to release the submit fence for a
request from an IRQ to break a lock inversion - i.e. the fence must be
release went holding ce->guc_state.lock and the releasing of the can
acquire sched_engine->lock.

v2:
 (Daniele)
  - Delete request from list before calling irq_work_queue
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-16-matthew.brost@intel.com

Reset LRC descriptor if a context register returns -ENODEV as this means
we are mid-reset.

Fixes: eb5e7da7 ("drm/i915/guc: Reset implementation for new GuC interface")
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-15-matthew.brost@intel.com

Before we did some clever tricks to not use the a lock when touching
guc_state.sched_state in certain cases. Don't do that, enforce the use
of the lock.

v2:
 (kernel test robo )
  - Add __maybe_unused to sched_state_is_init()

v3: rebase after the unused code path removal has been moved to an
earlier patch.
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Reported-by: Nkernel test robot <lkp@intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-14-matthew.brost@intel.com

A context can get destroyed after cancelling a request, if a context or
GT reset occurs, so take a reference to context when cancelling a
request.

Fixes: 62eaf0ae ("drm/i915/guc: Support request cancellation")
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-13-matthew.brost@intel.com

While debugging an issue with full GT resets I went down a rabbit hole
thinking the scrubbing of lost G2H wasn't working correctly. This proved
to be incorrect as this was working just fine but this chase inspired me
to write a selftest to prove that this works. This simple selftest
injects errors dropping various G2H and then issues a full GT reset
proving that the scrubbing of these G2H doesn't blow up.

v2:
 (Daniel Vetter)
  - Use ifdef instead of macros for selftests
v3:
 (Checkpatch)
  - A space after 'switch' statement
v4:
 (Daniele)
  - A comment saying GT won't idle if G2H are lost
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-12-matthew.brost@intel.com

When the GuC does a media reset, it copies a golden context state back
into the corrupted context's state. The address of the golden context
and the size of the engine state restore are passed in via the GuC ADS.
The i915 had a bug where it passed in the whole size of the golden
context, not the size of the engine state to restore resulting in a
memory corruption.

Also copy the entire golden context on init rather than just the engine
state that is restored.

v2 (Daniele): use defines to avoid duplicated const variables (John).

Fixes: 481d458c ("drm/i915/guc: Add golden context to GuC ADS")
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: NJohn Harrison <John.C.Harrison@Intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-11-matthew.brost@intel.com

When unblocking a context, do not enable scheduling if the context is
banned, guc_id invalid, or not registered.

v2:
 (Daniele)
  - Add helper for unblock

Fixes: 62eaf0ae ("drm/i915/guc: Support request cancellation")
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-10-matthew.brost@intel.com

Kick tasklet after queuing a request so it submitted in a timely manner.

Fixes: 3a4cdf19 ("drm/i915/guc: Implement GuC context operations for new inteface")
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-9-matthew.brost@intel.com

If the context is reset as a result of the request cancellation the
context reset G2H is received after schedule disable done G2H which is
the wrong order. The schedule disable done G2H release the waiting
request cancellation code which resubmits the context. This races
with the context reset G2H which also wants to resubmit the context but
in this case it really should be a NOP as request cancellation code owns
the resubmit. Use some clever tricks of checking the context state to
seal this race until the GuC firmware is fixed.

v2:
 (Checkpatch)
  - Fix typos
v3:
 (Daniele)
  - State that is a bug in the GuC firmware

Fixes: 62eaf0ae ("drm/i915/guc: Support request cancellation")
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-7-matthew.brost@intel.com

Rather than processing 1 G2H at a time and re-queuing the work queue if
more messages exist, process all the G2H in a single pass of the work
queue.
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-6-matthew.brost@intel.com

Don't drop ce->guc_active.lock when unwinding a context after reset.
At one point we had to drop this because of a lock inversion but that is
no longer the case. It is much safer to hold the lock so let's do that.

Fixes: eb5e7da7 ("drm/i915/guc: Reset implementation for new GuC interface")
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-5-matthew.brost@intel.com

When unwinding requests on a reset context, if other requests in the
context are in the priority list the requests could be resubmitted out
of seqno order. Traverse the list of active requests in reverse and
append to the head of the priority list to fix this.

Fixes: eb5e7da7 ("drm/i915/guc: Reset implementation for new GuC interface")
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-4-matthew.brost@intel.com

A small race that could result in incorrect accounting of the number
of outstanding G2H. Basically prior to this patch we did not increment
the number of outstanding G2H if we encoutered a GT reset while sending
a H2G. This was incorrect as the context state had already been updated
to anticipate a G2H response thus the counter should be incremented.

As part of this change we remove a legacy (now unused) path that was the
last caller requiring a G2H response that was not guaranteed to loop.
This allows us to simplify the accounting as we don't need to handle the
case where the send fails due to the channel being busy.

Also always use helper when decrementing this value.

v2 (Daniele): update GEM_BUG_ON check, pull in dead code removal from
later patch, remove loop param from context_deregister.

Fixes: f4eb1f3f ("drm/i915/guc: Ensure G2H response has space in buffer")
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: NJohn Harrison <John.C.Harrison@Intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-3-matthew.brost@intel.com

Prior to this patch the blocked context counter was cleared on
init_sched_state (used during registering a context & resets) which is
incorrect. This state needs to be persistent or the counter can read the
incorrect value resulting in scheduling never getting enabled again.

Fixes: 62eaf0ae ("drm/i915/guc: Support request cancellation")
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Cc: <stable@vger.kernel.org>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-2-matthew.brost@intel.com

The function is only used from within GEM_BUG_ON(), which is causing
warnings with Wunneeded-internal-declaration in some builds. Since the
function is a simple wrapper around a CT function, we can just call the
CT function directly instead.

Fixes: 1fb12c58 ("drm/i915/guc: skip disabling CTBs before sanitizing the GuC")
Reported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: NMatthew Brost <matthew.brost@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210823163137.19770-1-daniele.ceraolospurio@intel.com

This feature hands over the control of HW RC6 to the GuC.
GuC decides when to put HW into RC6 based on it's internal
busyness algorithms.

GuCRC needs GuC submission to be enabled, and only
supported on Gen12+ for now.

When GuCRC is enabled, do not set HW RC6. Use a H2G message
to tell GuC to enable GuCRC. When disabling RC6, tell GuC to
revert RC6 control back to KMD. KMD is still responsible for
enabling everything related to Coarse Power Gating though.

v2: Address comments (Michal W)
v3: Don't set hysterisis values when GuCRC is used (Matt Roper)
v4: checkpatch()
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NVinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-15-vinay.belgaumkar@intel.com

Cache rp0, rp1 and rpn platform limits into SLPC structure
for range checking while setting min/max frequencies.

Also add "soft" limits which keep track of frequency changes
made from userland. These are initially set to platform min
and max.

v2: Address review comments (Michal W)
v3: Formatting (Michal W)
v4: Add separate function to parse rp values (Michal W)
v5: Perform range checking for set min/max (Michal W)
v6: checkpatch() and rename static functions (Michal W)
v7: check ret code while setting SLPC limits (Michal W)
Signed-off-by: NVinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-12-vinay.belgaumkar@intel.com

This interrupt is enabled during RPS initialization, and
now needs to be done by SLPC code. It allows ARAT timer
expiry interrupts to get forwarded to GuC.

v2: Fix comment (Matthew Brost)
v3: checkpatch()
Reviewed-by: NMatthew Brost <matthew.brost@intel.com>
Signed-off-by: NVinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-11-vinay.belgaumkar@intel.com

This prints out relevant SLPC info from the SLPC shared structure.

We will send a H2G message which forces SLPC to update the
shared data structure with latest information before reading it.

v2: Address review comments (Michal W)
v3: Remove unnecessary tasks from slpc_info (Michal W)
v4: Rename function to intel_guc_slpc_print_info() (Michal W)
v5: checkpatch()
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NVinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: NSundaresan Sujaritha <sujaritha.sundaresan@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-10-vinay.belgaumkar@intel.com

Add helpers to read the min/max frequency being used
by SLPC. This is done by send a H2G command which forces
SLPC to update the shared data struct which can then be
read. These helpers will be used in a sysfs patch later
on.

v2: Address review comments (Michal W)
v3: Return err in case of query failure (Michal W)
v4: Move decode_min/max_freq to this patch
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NVinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: NSundaresan Sujaritha <sujaritha.sundaresan@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-9-vinay.belgaumkar@intel.com

Add param set h2g helpers to set the min and max frequencies
for use by SLPC.

v2: Address review comments (Michal W)
v3: Check for positive error code (Michal W)
v4: Print generic error in set_param (Michal W)
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NSundaresan Sujaritha <sujaritha.sundaresan@intel.com>
Signed-off-by: NVinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-8-vinay.belgaumkar@intel.com

The assumption when it was added was that GT would not be
holding any gt_pm references. However, uc_init is called
from gt_init_hw, which holds a forcewake ref. If SLPC
enable fails, we will still be holding this ref, which will
result in the BUG_ON.
Reviewed-by: NMatthew Brost <matthew.brost@intel.com>
Signed-off-by: NVinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-7-vinay.belgaumkar@intel.com

Add methods for interacting with GuC for enabling SLPC. Enable
SLPC after GuC submission has been established. GuC load will
fail if SLPC cannot be successfully initialized. Add various
helper methods to set/unset the parameters for SLPC. They can
be set using H2G calls or directly setting bits in the shared
data structure.

v2: Address several review comments, add new helpers for
decoding the SLPC min/max frequencies. Use masks instead of hardcoded
constants. (Michal W)

v3: Split global_state_to_string function, and check for positive
non-zero return value from intel_guc_send() (Michal W)

v4: Optimize the stringify function and other comments (Michal W)

v5: Enable slpc as well before declaring GuC submission status (Michal W)

v6: Checkpatch()
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NVinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: NSundaresan Sujaritha <sujaritha.sundaresan@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-6-vinay.belgaumkar@intel.com

Allocate data structures for SLPC and functions for
initializing on host side.

v2: Address review comments (Michal W)
v3: Remove unnecessary header includes (Michal W)
v4: Rebase
v5: Move allocation of shared data into slpc_init() (Michal W)
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NVinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: NSundaresan Sujaritha <sujaritha.sundaresan@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-5-vinay.belgaumkar@intel.com

Add constants and params that are needed to configure SLPC.

v2: Add a new abi header for SLPC. Replace bitfields with
genmasks. Address other comments from Michal W.

v3: Add slpc H2G format in abi, other review commments (Michal W)

v4: Update status bits according to latest spec

v5: checkpatch()
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NVinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: NSundaresan Sujaritha <sujaritha.sundaresan@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-4-vinay.belgaumkar@intel.com

Add macros to check for SLPC support. This feature is currently supported
for Gen12+ and enabled whenever GuC submission is enabled/selected.

Include templates for SLPC init/fini and enable.

v2: Move SLPC helper functions to intel_guc_slpc.c/.h. Define
basic template for SLPC structure in intel_guc_slpc_types.h.
Fix copyright (Michal W)

v3: Review comments (Michal W)

v4: Include supported/selected inside slpc struct (Michal W)
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NVinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: NSundaresan Sujaritha <sujaritha.sundaresan@intel.com>
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-2-vinay.belgaumkar@intel.com

Unblock GuC submission on Gen11+ platforms.

v2:
 (Martin Peres / John H)
  - Delete debug message when GuC is disabled by default on certain
    platforms
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Reviewed-by: NMatthew Brost <matthew.brost@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-34-matthew.brost@intel.com

Implement a simple static mapping algorithm of the i915 priority levels
(int, -1k to 1k exposed to user) to the 4 GuC levels. Mapping is as
follows:

i915 level < 0          -> GuC low level     (3)
i915 level == 0         -> GuC normal level  (2)
i915 level < INT_MAX    -> GuC high level    (1)
i915 level == INT_MAX   -> GuC highest level (0)

We believe this mapping should cover the UMD use cases (3 distinct user
levels + 1 kernel level).

In addition to static mapping, a simple counter system is attached to
each context tracking the number of requests inflight on the context at
each level. This is needed as the GuC levels are per context while in
the i915 levels are per request.

v2:
 (Daniele)
  - Add BUILD_BUG_ON to enforce ordering of priority levels
  - Add missing lockdep to guc_prio_fini
  - Check for return before setting context registered flag
  - Map DISPLAY priority or higher to highest guc prio
  - Update comment for guc_prio
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-33-matthew.brost@intel.com

When GuC submission is enabled, the GuC controls engine resets. Rather
than explicitly triggering a reset, the driver must submit a hanging
context to GuC and wait for the reset to occur.
Signed-off-by: NRahul Kumar Singh <rahul.kumar.singh@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: NMatthew Brost <matthew.brost@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-28-matthew.brost@intel.com

This adds GuC backend support for i915_request_cancel(), which in turn
makes CONFIG_DRM_I915_REQUEST_TIMEOUT work.

This implementation makes use of fence while there are likely simplier
options. A fence was chosen because of another feature coming soon
which requires a user to block on a context until scheduling is
disabled. In that case we return the fence to the user and the user can
wait on that fence.

v2:
 (Daniele)
  - A comment about locking the blocked incr / decr
  - A comments about the use of the fence
  - Update commit message explaining why fence
  - Delete redundant check blocked count in unblock function
  - Ring buffer implementation
  - Comment about blocked in submission path
  - Shorter rpm path
v3:
 (Checkpatch)
  - Fix typos in commit message
 (Daniel)
  - Rework to simplier locking structure in guc_context_block / unblock
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-26-matthew.brost@intel.com

When using GuC submission, if a context gets banned disable scheduling
and mark all inflight requests as complete.

Cc: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Reviewed-by: NJohn Harrison <John.C.Harrison@Intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-25-matthew.brost@intel.com

The media watchdog mechanism involves GuC doing a silent reset and
continue of the hung context. This requires the i915 driver provide a
golden context to GuC in the ADS.

v2:
 (Matthew Brost):
  - Fix memory corruption in shmem_read
 (John H)
  - Use locals rather than defines for LR_* + SKIP_SIZE
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Reviewed-by: NMatthew Brost <matthew.brost@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-24-matthew.brost@intel.com

Added the scheduling policy parameters to the 'guc_info' debugfs state
dump.
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Reviewed-by: NMatthew Brost <matthew.brost@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-23-matthew.brost@intel.com