Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 28 10月, 2015 1 次提交
  3. 06 10月, 2015 1 次提交
  5. 15 9月, 2015 2 次提交
  7. 14 9月, 2015 1 次提交
  9. 29 8月, 2015 1 次提交
  11. 13 8月, 2015 1 次提交
    • K
      perf callchain: Per-event type selection support · d457c963
      由 Kan Liang 提交于 
      This patchkit adds the ability to set callgraph mode (fp, dwarf, lbr) per
event. This in term can reduce sampling overhead and the size of the
perf.data.

Here is an example.

  perf record -e 'cpu/cpu-cycles,period=1000,call-graph=fp,time=1/,cpu/instructions,call-graph=lbr/' sleep 1

 perf evlist -v
 cpu/cpu-cycles,period=1000,call-graph=fp,time=1/: type: 4, size: 112,
 config: 0x3c, { sample_period, sample_freq }: 1000, sample_type:
 IP|TID|TIME|CALLCHAIN|PERIOD|IDENTIFIER, read_format: ID, disabled: 1,
 inherit: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all:
 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
 cpu/instructions,call-graph=lbr/: type: 4, size: 112, config: 0xc0, {
 sample_period, sample_freq }: 4000, sample_type:
 IP|TID|TIME|CALLCHAIN|PERIOD|BRANCH_STACK|IDENTIFIER, read_format: ID,
 disabled: 1, inherit: 1, freq: 1, enable_on_exec: 1, sample_id_all: 1,
 exclude_guest: 1
Signed-off-by: NKan Liang <kan.liang@intel.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1439289050-40510-1-git-send-email-kan.liang@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      d457c963
  13. 11 8月, 2015 1 次提交
  15. 09 8月, 2015 1 次提交
  17. 05 8月, 2015 1 次提交
  19. 30 7月, 2015 2 次提交
  21. 21 7月, 2015 1 次提交
    • W
      perf record: Apply filter to all events in a glob matching · 15bfd2cc
      由 Wang Nan 提交于 
      There is an old problem in perf's filter applying which first posted at
Sep. 2014 at https://lkml.org/lkml/2014/9/9/944 that, if passing
multiple events in a glob matching expression in cmdline then add
'--filter' after them, the filter will be applied on only the last one.

For example:

 # dd if=/dev/zero of=/dev/null &
 [1] 464
 # perf record -a -e 'syscalls:sys_*_read' --filter 'common_pid != 464' sleep 0.1
 [ perf record: Woken up 1 times to write data ]
 [ perf record: Captured and wrote 0.239 MB perf.data (2094 samples) ]
 # perf report --stdio | tee
 ...
 # Samples: 2K of event 'syscalls:sys_enter_read'
 # Event count (approx.): 2092
 ...
 # Samples: 2  of event 'syscalls:sys_exit_read'
 # Event count (approx.): 2
 ...

In this example, filter only applied on 'syscalls:sys_exit_read', and
there's no way to set filter for ''syscalls:sys_enter_read'.

This patch adds a 'cmdline_group_boundary' for 'struct evsel', and
apply filter on all events between two boundary marks.

After applying this patch:

 # perf record -a -e 'syscalls:sys_*_read' --filter 'common_pid != 464' sleep 0.1
 [ perf record: Woken up 1 times to write data ]
 [ perf record: Captured and wrote 0.031 MB perf.data (3 samples) ]
 # perf report --stdio | tee
 ...
 # Samples: 1  of event 'syscalls:sys_enter_read'
 # Event count (approx.): 1
 ...
 # Samples: 2  of event 'syscalls:sys_exit_read'
 # Event count (approx.): 2
 ...
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Reported-by: NBrendan Gregg <brendan.d.gregg@gmail.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1436513770-8896-1-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      15bfd2cc
  23. 06 7月, 2015 3 次提交
    • A
      perf evsel: Introduce append_filter() method · 64ec84f5
      由 Arnaldo Carvalho de Melo 提交于 
      To allow building filters in evsel->filter, that will eventually be
applied via perf_evsel__apply_filter().

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-sjfoes3pycx7nlpmgedca13v@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      64ec84f5
    • A
      perf evsel: Introduce set_filter method · 12467ae4
      由 Arnaldo Carvalho de Melo 提交于 
      Replaces existing filter string with the one provided.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-jst49z83li0yx3g18o54u51a@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      12467ae4
    • A
      perf evsel: Rename set_filter to apply_filter · f47805a2
      由 Arnaldo Carvalho de Melo 提交于 
      We need to be able to go on constructing a complex filter in multiple
stages, since we can only set one filter per event.

For instance, we need to be able, in 'perf trace' to filter by the
'common_pid' field all the time, if only for the tracer itself, to
avoid a feedback loop, and, in addition, we may want to filter the
raw_syscalls:sys_{enter,exit} events by its 'id' filter, when using
'perf trace -e open,close' or 'perf trace -e !open,close', i.e. when
we are interested in just a subset of syscalls or when we are not
interested in it.

So we will have:

   perf_evsel__set_filter(evsel, char *filter)

       Replaces whatever is in evsel->filter.

   perf_evsel__append_filter(evsel, const char *op, char *filter)

       Appends, using op ("&&" or "||") with what is in evsel->filter.

   perf_evsel__apply_filter(evsel, filter):

        That actually applies a filter, be it the one being
        constructed in evsel->filter, or any other, for tools
        with more specific ways to build the filter, issuing
        the appropriate ioctl for all the evsel fds.

The same changes will be made to the evlist__{set,apply} variants to
keep everything consistent.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-2s5z9xtpnc2lwio3cv5x0jek@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      f47805a2
  25. 26 6月, 2015 6 次提交
  27. 16 6月, 2015 1 次提交
  29. 18 5月, 2015 1 次提交
    • A
      perf tools: Elliminate alignment holes · 86066064
      由 Arnaldo Carvalho de Melo 提交于 
      perf_evsel:

Before:

	/* size: 320, cachelines: 5, members: 35 */
	/* sum members: 304, holes: 3, sum holes: 16 */

After:

	/* size: 304, cachelines: 5, members: 35 */
	/* last cacheline: 48 bytes */

perf_evlist:

Before:

	/* size: 2544, cachelines: 40, members: 17 */
	/* sum members: 2533, holes: 2, sum holes: 11 */
	/* last cacheline: 48 bytes */

After:

	/* size: 2536, cachelines: 40, members: 17 */
	/* sum members: 2533, holes: 1, sum holes: 3 */
	/* last cacheline: 40 bytes */

timechart:

Before:

	/* size: 288, cachelines: 5, members: 21 */
	/* sum members: 271, holes: 2, sum holes: 10 */
	/* padding: 7 */
	/* last cacheline: 32 bytes */

After:

	/* size: 272, cachelines: 5, members: 21 */
	/* sum members: 271, holes: 1, sum holes: 1 */
	/* last cacheline: 16 bytes */

thread:

Before:

	/* size: 112, cachelines: 2, members: 15 */
	/* sum members: 101, holes: 2, sum holes: 11 */
	/* last cacheline: 48 bytes */

After:

	/* size: 104, cachelines: 2, members: 15 */
	/* sum members: 101, holes: 1, sum holes: 3 */
	/* last cacheline: 40 bytes */

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-a543w7zjl9yyrg9nkf1teukp@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      86066064
  31. 08 4月, 2015 1 次提交
    • P
      perf tools: Merge all perf_event_attr print functions · 2c5e8c52
      由 Peter Zijlstra 提交于 
      Currently there's 3 (that I found) different and incomplete
implementations of printing perf_event_attr.

This is quite silly. Merge the lot.

While this patch does not retain the exact form all printing that I
found is debug output and thus it should not be critical.

Also, I cannot find a single print_event_desc() caller.

Pre:

 $ perf record -vv -e cycles -- sleep 1
 ------------------------------------------------------------
 perf_event_attr:
  type                0
  size                104
  config              0
  sample_period       4000
  sample_freq         4000
  sample_type         0x107
  read_format         0
  disabled            1    inherit             1
  pinned              0    exclusive           0
  exclude_user        0    exclude_kernel      0
  exclude_hv          0    exclude_idle        0
  mmap                1    comm                1
  mmap2               1    comm_exec           1
  freq                1    inherit_stat        0
  enable_on_exec      1    task                1
  watermark           0    precise_ip          0
  mmap_data           0    sample_id_all       1
  exclude_host        0    exclude_guest       1
  excl.callchain_kern 0    excl.callchain_user 0
  wakeup_events       0
  wakeup_watermark    0
  bp_type             0
  bp_addr             0
  config1             0
  bp_len              0
  config2             0
  branch_sample_type  0
  sample_regs_user    0
  sample_stack_user   0
  sample_regs_intr    0
 ------------------------------------------------------------

 $ perf evlist  -vv
 cycles: sample_freq=4000, size: 104, sample_type: IP|TID|TIME|PERIOD,
 disabled: 1, inherit: 1, mmap: 1, mmap2: 1, comm: 1, comm_exec: 1,
 freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1

 Post:

 $ ./perf record -vv -e cycles -- sleep 1
 ------------------------------------------------------------
 perf_event_attr:
  size                             112
  { sample_period, sample_freq }   4000
  sample_type                      IP|TID|TIME|PERIOD
  disabled                         1
  inherit                          1
  mmap                             1
  comm                             1
  freq                             1
  enable_on_exec                   1
  task                             1
  sample_id_all                    1
  exclude_guest                    1
  mmap2                            1
  comm_exec                        1
------------------------------------------------------------

 $ ./perf evlist  -vv
 cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type:
 IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq:
 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1,
 mmap2: 1, comm_exec: 1
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150407091150.644238729@infradead.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      2c5e8c52
  33. 03 4月, 2015 1 次提交
  35. 19 2月, 2015 1 次提交
    • K
      perf tools: Construct LBR call chain · 384b6055
      由 Kan Liang 提交于 
      LBR call stack only has user-space callchains. It is output in the
PERF_SAMPLE_BRANCH_STACK data format. For kernel callchains, it's
still in the form of PERF_SAMPLE_CALLCHAIN.

The perf tool has to handle both data sources to construct a
complete callstack.

For the "perf report -D" option, both lbr and fp information will be
displayed.

A new call chain recording option "lbr" is introduced into the perf
tool for LBR call stack. The user can use --call-graph lbr to get
the call stack information from hardware.

Here are some examples.

When profiling bc(1) on Fedora 19:

  echo 'scale=2000; 4*a(1)' > cmd; perf record --call-graph lbr bc -l < cmd

If enabling LBR, perf report output looks like:

    50.36%       bc  bc                 [.] bc_divide
                 |
                 --- bc_divide
                     execute
                     run_code
                     yyparse
                     main
                     __libc_start_main
                     _start
    33.66%       bc  bc                 [.] _one_mult
                 |
                 --- _one_mult
                     bc_divide
                     execute
                     run_code
                     yyparse
                     main
                     __libc_start_main
                     _start
     7.62%       bc  bc                 [.] _bc_do_add
                 |
                 --- _bc_do_add
                    |
                    |--99.89%-- 0x2000186a8
                     --0.11%-- [...]
     6.83%       bc  bc                 [.] _bc_do_sub
                 |
                 --- _bc_do_sub
                    |
                    |--99.94%-- bc_add
                    |          execute
                    |          run_code
                    |          yyparse
                    |          main
                    |          __libc_start_main
                    |          _start
                     --0.06%-- [...]
     0.46%       bc  libc-2.17.so       [.] __memset_sse2
                 |
                 --- __memset_sse2
                    |
                    |--54.13%-- bc_new_num
                    |          |
                    |          |--51.00%-- bc_divide
                    |          |          execute
                    |          |          run_code
                    |          |          yyparse
                    |          |          main
                    |          |          __libc_start_main
                    |          |          _start
                    |          |
                    |          |--30.46%-- _bc_do_sub
                    |          |          bc_add
                    |          |          execute
                    |          |          run_code
                    |          |          yyparse
                    |          |          main
                    |          |          __libc_start_main
                    |          |          _start
                    |          |
                    |           --18.55%-- _bc_do_add
                    |                     bc_add
                    |                     execute
                    |                     run_code
                    |                     yyparse
                    |                     main
                    |                     __libc_start_main
                    |                     _start
                    |
                     --45.87%-- bc_divide
                               execute
                               run_code
                               yyparse
                               main
                               __libc_start_main
                               _start

If using FP, perf report output looks like:

  echo 'scale=2000; 4*a(1)' > cmd; perf record --call-graph fp bc -l < cmd

    50.49%       bc  bc                 [.] bc_divide
                 |
                 --- bc_divide
    33.57%       bc  bc                 [.] _one_mult
                 |
                 --- _one_mult
     7.61%       bc  bc                 [.] _bc_do_add
                 |
                 --- _bc_do_add
                     0x2000186a8
     6.88%       bc  bc                 [.] _bc_do_sub
                 |
                 --- _bc_do_sub
     0.42%       bc  libc-2.17.so       [.] __memcpy_ssse3_back
                 |
                 --- __memcpy_ssse3_back

If using LBR, perf report -D output looks like:

3458145275743 0x2fd750 [0xd8]: PERF_RECORD_SAMPLE(IP, 0x2): 9748/9748: 0x408ea8 period: 609644 addr: 0
... LBR call chain: nr:8
.....  0: fffffffffffffe00
.....  1: 0000000000408e50
.....  2: 000000000040a458
.....  3: 000000000040562e
.....  4: 0000000000408590
.....  5: 00000000004022c0
.....  6: 00000000004015dd
.....  7: 0000003d1cc21b43
... FP chain: nr:2
.....  0: fffffffffffffe00
.....  1: 0000000000408ea8
 ... thread: bc:9748
 ...... dso: /usr/bin/bc

The LBR call stack has the following known limitations:

 - Zero length calls are not filtered out by the hardware

 - Exception handing such as setjmp/longjmp will have calls/returns not
   match

 - Pushing different return address onto the stack will have
   calls/returns not match

 - If callstack is deeper than the LBR, only the last entries are
   captured
Tested-by: NJiri Olsa <jolsa@kernel.org>
Signed-off-by: NKan Liang <kan.liang@intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1420482185-29830-3-git-send-email-kan.liang@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      384b6055
  37. 02 12月, 2014 2 次提交
  39. 25 11月, 2014 5 次提交
  41. 29 10月, 2014 2 次提交
    • A
      perf tools: Add id index · 3c659eed
      由 Adrian Hunter 提交于 
      Add an index of the event identifiers, in preparation for Intel PT.

The event id (also called the sample id) is a unique number
allocated by the kernel to the event created by perf_event_open().  Events
can include the event id by having a sample type including PERF_SAMPLE_ID or
PERF_SAMPLE_IDENTIFIER.

Currently the main use of the event id is to match an event back to the
evsel to which it belongs i.e. perf_evlist__id2evsel()

The purpose of this patch is to make it possible to match an event back to
the mmap from which it was read.  The reason that is useful is because the
mmap represents a time-ordered context (either for a cpu or for a thread).
Intel PT decodes trace information on that basis.  In full-trace mode, that
information can be recorded when the Intel PT trace is read, but in
sample-mode the Intel PT trace data is embedded in a sample and it is in
that case that the "id index" is needed.

So the mmaps are numbered (idx) and the cpu and tid recorded against the id
by perf_evlist__set_sid_idx() which is called by perf_evlist__mmap_per_evsel().

That information is recorded on the perf.data file in the new "id index".
idx, cpu and tid are added to struct perf_sample_id (which is the node of
evlist's hash table to match ids to evsels).  The information can be
retrieved using perf_evlist__id2sid().  Note however this all depends on
having a sample type including PERF_SAMPLE_ID or PERF_SAMPLE_IDENTIFIER,
otherwise ids are not recorded.

The "id index" is a synthesized event record which will be created when
Intel PT sampling is used by calling perf_event__synthesize_id_index().
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1414417770-18602-2-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      3c659eed
    • A
      perf tools: Add facility to export data in database-friendly way · 0db15b1e
      由 Adrian Hunter 提交于 
      This patch introduces an abstraction for exporting sample data in a
database-friendly way.  The abstraction does not implement the actual
output.  A subsequent patch takes this facility into use for extending
the script interface.

The abstraction is needed because static data like symbols, dsos, comms
etc need to be exported only once.  That means allocating them a unique
identifier and recording it on each structure.  The member 'db_id' is
used for that.  'db_id' is just a 64-bit sequence number.

Exporting centres around the db_export__sample() function which exports
the associated data structures if they have not yet been allocated a
db_id.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1414061124-26830-6-git-send-email-adrian.hunter@intel.com
[ committer note: Stash db_id using symbol_conf.priv_size + symbol__priv() and foo->priv areas ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      0db15b1e
  43. 17 10月, 2014 1 次提交
    • A
      perf evsel: No need to drag util/cgroup.h · f14d5707
      由 Arnaldo Carvalho de Melo 提交于 
      The only thing we need is a forward declaration for 'struct cgroup_sel',
that is inside 'struct perf_evsel'.

Include cgroup.h instead on the tools that support cgroups.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-b7kuymbgf0zxi5viyjjtu5hk@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      f14d5707
  45. 15 10月, 2014 3 次提交
    • A
      perf evsel: Make some exit routines static · 8885846f
      由 Arnaldo Carvalho de Melo 提交于 
      Since they are automatically called by other methods used by tools.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ne3g4any7q6ty5d6yv8t1wws@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      8885846f
    • A
      perf evsel: Add missing 'target' struct forward declaration · 80b2210c
      由 Arnaldo Carvalho de Melo 提交于 
      We use it in evsel.h but were getting it indirectly, fix it.

Noticed while working on having evsel.h usable by rasd.c.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-94t3jvw4tmzrq3dnovvpl65e@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      80b2210c
    • A
      perf tools: Remove hists from evsel · a635fc51
      由 Arnaldo Carvalho de Melo 提交于 
      Now tools that deals want to have an hists per evsel need to call
hists__init() before creating any evsels, which can be as early as when
parsing the command line, so do it before calling parse_options().

The current tools using hists/hist_entries are report, top and annotate,
change them to request per evsel hists.

This is in preparation for making evsels usable by 3rd party tools, that
not necessarily live in perf's source code repository.
Acked-by: NBorislav Petkov <bp@suse.de>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-usjx2la743f10ippj7p1b20x@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      a635fc51