The core handles this for us.
Acked-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We should be checking whether the driver enabled runtime pm
rather than whether the asic supports BOCO or BACO.  That said
in general they are equivalent unless the user has disabled
runpm or it has been disabled for a specific asic.
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The pci core handles this for us in pci_pm_init.
Acked-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Same as gfx9.  This allows us to kill the waves for hung
shaders.
Acked-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Create sysfs file using attributes.
Signed-off-by: NNirmoy Das <nirmoy.das@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

BACO is needed to support hibernate on Navi1X.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

physical_node_id * node_segment_size should be the
dram_base_address for current gpu node in xgmi config
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NJohn Clements <john.clements@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

drop IP specific psp function for rlc autoload since
the autoload_supported was introduced to mark ASICs
that support rlc_autoload
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NGuchun Chen <guchun.chen@amd.com>
Reviewed-by: NJohn Clements <john.clements@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

cure posion command was replaced by ras recovery
solution and was not a formal command supported
by ras ta anymore
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NGuchun Chen <guchun.chen@amd.com>
Reviewed-by: NJohn Clements <john.clements@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

TRIGGER_ERROR is common ras ta command for all the
ASICs that support RAS feature. switch to common helper
to avoid duplicate implementation per IP generation
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NGuchun Chen <guchun.chen@amd.com>
Reviewed-by: NJohn Clements <john.clements@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

get_hive_id/get_node_id/get_topology_info/set_topology_info
are common xgmi command supported by TA for all the ASICs
that support xgmi link. They should be implemented as common
helper functions to avoid duplicated code per IP generation
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NGuchun Chen <guchun.chen@amd.com>
Reviewed-by: NJohn Clements <john.clements@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Glad to spend time on kernel driver in past years.
I've moved to new focus in umd and couldn't commit
enough time to discussions.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NChunming Zhou <david1.zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Remove duplicate headers which are included twice.
Signed-off-by: NChen Zhou <chenzhou10@huawei.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fix the following coccicheck warning:

drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c:3216:16-22:
Unneeded variable: "result". Return "DC_OK" on line 3229
Signed-off-by: NJason Yan <yanaijie@huawei.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

There is DEVICE_ATTR mechanism in separate attribute define.
So this change is to use attr array, also use
sysfs_create_files in init function & sysfs_remove_files in
fini function.
This maybe make the code a bit readable.
Signed-off-by: NBernard Zhao <bernard@vivo.com>

Changes since V1:
*Use DEVICE_ATTR mechanism

Link for V1:
*https://lore.kernel.org/patchwork/patch/1228076/

V2: make array const to fix build errors
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch adds a basic cursor check when an atomic test-only commit is
performed. The position and size of the cursor plane is checked.

This should fix user-space relying on atomic checks to assign buffers to
planes.
Signed-off-by: NSimon Ser <contact@emersion.fr>
Reported-by: NRoman Gilg <subdiff@gmail.com>
References: https://github.com/emersion/libliftoff/issues/46
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Reviewed-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
We're sending the drm vblank event a frame too early in the case where
the pageflip happens close to VUPDATE and ends up blocking the signal.

The implementation in DM was previously correct *before* we started
sending vblank events from VSTARTUP unconditionally to handle cases
where HUBP was off, OTG was ON and userspace was still requesting some
DRM planes enabled. As part of that patch series we dropped VUPDATE
since it was deemed close enough to VSTARTUP, but there's a key
difference betweeen VSTARTUP and VUPDATE - the VUPDATE signal can be
blocked if we're holding the pipe lock.

There was a fix recently to revert the unconditional behavior for the
DCN VSTARTUP vblank event since it was sending the pageflip event on
the wrong frame - once again, due to blocking VUPDATE and having the
address start scanning out two frames later.

The problem with this fix is it didn't update the logic that calls
drm_crtc_handle_vblank(), so the timestamps are totally bogus now.

[How]
Essentially reverts most of the original VSTARTUP series but retains
the behavior to send back events when active planes == 0.

Some refactoring/cleanup was done to not have duplicated code in both
the handlers.

Fixes: 16f17eda ("drm/amd/display: Send vblank and user events at vsartup for DCN")
Fixes: 3a2ce8d6 ("drm/amd/display: Disable VUpdate interrupt for DCN hardware")
Fixes: 2b5aed9a ("drm/amd/display: Fix pageflip event race condition for DCN.")
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NLeo Li <sunpeng.li@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Invoke sequence should abort when ras interrupt is detected before reading TA host shared memory
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NJohn Clements <john.clements@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fixes warning because size is uint32_t and can never be negtative

drivers/gpu/drm/amd/amdgpu/../powerplay/navi10_ppt.c:1296:12: warning:
comparison of unsigned expression < 0 is always false [-Wtype-limits]
   if (size < 0)
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NChenTao <chentao107@huawei.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Releasing the AMDGPU BO ref directly leads to problems when BOs were
exported as DMA bufs. Releasing the GEM reference makes sure that the
AMDGPU/TTM BO is not freed too early.

Also take a GEM reference when importing BOs from DMABufs to keep
references to imported BOs balances properly.
Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Tested-by: NAlex Sierra <alex.sierra@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Sierra <alex.sierra@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We set the fb smem pointer to the offset into the BAR, so keep
the fbdev bo in vram.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=207581
Fixes: 6c8d74ca ("drm/amdgpu: Enable scatter gather display support")
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Since gfxoff should be disabled first before trying to access those
GC registers.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

As this is already properly handled in amdgpu_gfx_off_ctrl(). In fact,
this unnecessary cancel_delayed_work_sync may leave a small time window
for race condition and is dangerous.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Otherwise, MGCG/MGLS will be left enabled.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This should speed up debugging VRAM access a lot.

v2: add HDP flush/invalidate

Unrevert: RAS issue at root of the issue has been addressed
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Acked-by: NJonathan Kim <Jonathan.Kim@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NKent Russell <kent.russell@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It works together with drm framework
"drm: Add support for DP 1.4 Compliance edid corruption test"

Add the edid validity check scenario when edid base block is read back
with error. Send back real edid checksum and enable fail-safe mode in DC.
Signed-off-by: NJerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

After the structure was padded to 1024 bytes, it is no longer
suitable for being a local variable, as the function surpasses
the warning limit for 32-bit architectures:

drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:587:5: error: stack frame size of 1072 bytes in function 'amdgpu_ras_feature_enable' [-Werror,-Wframe-larger-than=]
int amdgpu_ras_feature_enable(struct amdgpu_device *adev,
    ^

Use kzalloc() instead to get it from the heap.

Fixes: a0d25482 ("drm/amdgpu: update RAS TA to Host interface")
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This uses backlight_device_set_brightness() to set the brightness
level requested via ATIF.
Signed-off-by: NAndriy Gapon <avg@FreeBSD.org>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fixes warning because pipe is unsigned long and can never be negtative

vers/gpu/drm/radeon/radeon_kms.c:831:11: warning:
comparison of unsigned expression < 0 is always false [-Wtype-limits]
  if (pipe < 0 || pipe >= rdev->num_crtc) {
drivers/gpu/drm/radeon/radeon_kms.c:857:11: warning:
comparison of unsigned expression < 0 is always false [-Wtype-limits]
  if (pipe < 0 || pipe >= rdev->num_crtc) {
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NChenTao <chentao107@huawei.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

When building with Clang:

drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:4160:53: warning: overflow in
expression; result is -294967296 with type 'long' [-Winteger-overflow]
                expires = ktime_get_mono_fast_ns() + NSEC_PER_SEC * 4L;
                                                                  ^
1 warning generated.

Multiplication happens first due to order of operations and both
NSEC_PER_SEC and 4 are long literals so the expression overflows. To
avoid this, make 4 an unsigned long long literal, which matches the
type of expires (u64).

Fixes: 3f12acc8 ("drm/amdgpu: put the audio codec into suspend state before gpu reset V3")
Link: https://github.com/ClangBuiltLinux/linux/issues/1017Signed-off-by: NNathan Chancellor <natechancellor@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add dmub related struct field for future use.
Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com>
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Make a separation of what belongs in the differen dmub
headers

dmub_srv.h is for exposing dmub srv interface to rest of
driver.

other headers inside dmub/inc exposes cmds and definitions
that are owned by the firmware

[How]
keep firmware owned definitions in dmub/inc

move stuff that is purely driver interface headers to dmub/
since those are interface calls that are defined for rest of
driver to use
Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NJerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: NHersen Wu <hersenxs.wu@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
During hotplug, a DP port may be connected to the sink through
passive adapter which does not support DPCD reads. Issuing reads
without checking for this condition will result in errors

[how]
Ensure the link is in aux_mode before initiating operation that result
in a DPCD read.
Signed-off-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Want to make use of detile buffer of all 4 pipes to maximize amount of
data stored to hide certain memory latency cases.

[How]
In case of 1 plane and 1 stream, program 4 pipes to each retrieve 1/4 of
plane later mixed together by the MPCs. Added support for transition
from 4 to 1 MPC to 2 to 1 MPC or no pipe split case and vice versa.
Currently, only enabled if debug flag is set.
Signed-off-by: NIsabel Zhang <isabel.zhang@amd.com>
Reviewed-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
same with CL#1711022(correcting yuv420 black color in function dcn10_blank_pixel_data,program_scaler),
yuv420 black color also needs to be correct when enabling HDMI stream at the resume procedure.

[How]
correcting the yuv420 black color according to the way how 420 is packed :2 channels carry Y component,
1 channel alternate between Cb and Cr.
Signed-off-by: Nyanyan kang <Yanyan.Kang@amd.com>
Reviewed-by: NEric Yang <eric.yang2@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
For a type like PSR version, it makes sense for most of the code
to include a dc type, instead of having this a fw type define since
this is a capability and type exposed by dc.

Especially if it doesn't even need to communicate with the fw.

The code that is packing the firmware command message
should be the one who needs to translate the psr version
into a command that the firmware understands.

[How]
Add a dc_psr_version enum.
Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
FP16 pixel format is not declared to DRM in Linux DM.

[How]
Add FP16 format to the support list presented to DRM from Linux DM.
Signed-off-by: NStylon Wang <stylon.wang@amd.com>
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>