When netdevice with offloaded BPF programs is destroyed
the programs are orphaned and removed from the program
IDA - their IDs get released (the programs may remain
accessible via existing open file descriptors and pinned
files). After IDs are released they are set to 0.

This confuses dev_change_xdp_fd() because it compares
the __dev_xdp_query() result where 0 means no program
with prog->aux->id where 0 means orphaned.

dev_change_xdp_fd() would have incorrectly returned success
even though it had not installed the program.

Since drivers already catch this case via bpf_offload_dev_match()
let them handle this case. The error message drivers produce in
this case ("program loaded for a different device") is in fact
correct as the orphaned program must had to be loaded for a
different device.

Fixes: c14a9f63 ("net: Don't call XDP_SETUP_PROG when nothing is changed")
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In rtnl_net_notifyid(), we certainly can't pass a null GFP flag to
rtnl_notify(). A GFP_KERNEL flag would be fine in most circumstances,
but there are a few paths calling rtnl_net_notifyid() from atomic
context or from RCU critical sections. The later also precludes the use
of gfp_any() as it wouldn't detect the RCU case. Also, the nlmsg_new()
call is wrong too, as it uses GFP_KERNEL unconditionally.

Therefore, we need to pass the GFP flags as parameter and propagate it
through function calls until the proper flags can be determined.

In most cases, GFP_KERNEL is fine. The exceptions are:
  * openvswitch: ovs_vport_cmd_get() and ovs_vport_cmd_dump()
    indirectly call rtnl_net_notifyid() from RCU critical section,

  * rtnetlink: rtmsg_ifinfo_build_skb() already receives GFP flags as
    parameter.

Also, in ovs_vport_cmd_build_info(), let's change the GFP flags used
by nlmsg_new(). The function is allowed to sleep, so better make the
flags consistent with the ones used in the following
ovs_vport_cmd_fill_info() call.

Found by code inspection.

Fixes: 9a963454 ("netns: notify netns id events")
Signed-off-by: NGuillaume Nault <gnault@redhat.com>
Acked-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: NPravin B Shelar <pshelar@ovn.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch removes variables and callback these are related to the nested
device structure.
devices that can be nested have their own nest_level variable that
represents the depth of nested devices.
In the previous patch, new {lower/upper}_level variables are added and
they replace old private nest_level variable.
So, this patch removes all 'nest_level' variables.

In order to avoid lockdep warning, ->ndo_get_lock_subclass() was added
to get lockdep subclass value, which is actually lower nested depth value.
But now, they use the dynamic lockdep key to avoid lockdep warning instead
of the subclass.
So, this patch removes ->ndo_get_lock_subclass() callback.
Signed-off-by: NTaehee Yoo <ap420073@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In order to link an adjacent node, netdev_upper_dev_link() is used
and in order to unlink an adjacent node, netdev_upper_dev_unlink() is used.
unlink operation does not fail, but link operation can fail.

In order to exchange adjacent nodes, we should unlink an old adjacent
node first. then, link a new adjacent node.
If link operation is failed, we should link an old adjacent node again.
But this link operation can fail too.
It eventually breaks the adjacent link relationship.

This patch adds an ignore flag into the netdev_adjacent structure.
If this flag is set, netdev_upper_dev_link() ignores an old adjacent
node for a moment.

This patch also adds new functions for other modules.
netdev_adjacent_change_prepare()
netdev_adjacent_change_commit()
netdev_adjacent_change_abort()

netdev_adjacent_change_prepare() inserts new device into adjacent list
but new device is not allowed to use immediately.
If netdev_adjacent_change_prepare() fails, it internally rollbacks
adjacent list so that we don't need any other action.
netdev_adjacent_change_commit() deletes old device in the adjacent list
and allows new device to use.
netdev_adjacent_change_abort() rollbacks adjacent list.
Signed-off-by: NTaehee Yoo <ap420073@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some interface types could be nested.
(VLAN, BONDING, TEAM, MACSEC, MACVLAN, IPVLAN, VIRT_WIFI, VXLAN, etc..)
These interface types should set lockdep class because, without lockdep
class key, lockdep always warn about unexisting circular locking.

In the current code, these interfaces have their own lockdep class keys and
these manage itself. So that there are so many duplicate code around the
/driver/net and /net/.
This patch adds new generic lockdep keys and some helper functions for it.

This patch does below changes.
a) Add lockdep class keys in struct net_device
   - qdisc_running, xmit, addr_list, qdisc_busylock
   - these keys are used as dynamic lockdep key.
b) When net_device is being allocated, lockdep keys are registered.
   - alloc_netdev_mqs()
c) When net_device is being free'd llockdep keys are unregistered.
   - free_netdev()
d) Add generic lockdep key helper function
   - netdev_register_lockdep_key()
   - netdev_unregister_lockdep_key()
   - netdev_update_lockdep_key()
e) Remove unnecessary generic lockdep macro and functions
f) Remove unnecessary lockdep code of each interfaces.

After this patch, each interface modules don't need to maintain
their lockdep keys.
Signed-off-by: NTaehee Yoo <ap420073@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Current code doesn't limit the number of nested devices.
Nested devices would be handled recursively and this needs huge stack
memory. So, unlimited nested devices could make stack overflow.

This patch adds upper_level and lower_level, they are common variables
and represent maximum lower/upper depth.
When upper/lower device is attached or dettached,
{lower/upper}_level are updated. and if maximum depth is bigger than 8,
attach routine fails and returns -EMLINK.

In addition, this patch converts recursive routine of
netdev_walk_all_{lower/upper} to iterator routine.

Test commands:
    ip link add dummy0 type dummy
    ip link add link dummy0 name vlan1 type vlan id 1
    ip link set vlan1 up

    for i in {2..55}
    do
	    let A=$i-1

	    ip link add vlan$i link vlan$A type vlan id $i
    done
    ip link del dummy0

Splat looks like:
[  155.513226][  T908] BUG: KASAN: use-after-free in __unwind_start+0x71/0x850
[  155.514162][  T908] Write of size 88 at addr ffff8880608a6cc0 by task ip/908
[  155.515048][  T908]
[  155.515333][  T908] CPU: 0 PID: 908 Comm: ip Not tainted 5.4.0-rc3+ #96
[  155.516147][  T908] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[  155.517233][  T908] Call Trace:
[  155.517627][  T908]
[  155.517918][  T908] Allocated by task 0:
[  155.518412][  T908] (stack is not available)
[  155.518955][  T908]
[  155.519228][  T908] Freed by task 0:
[  155.519885][  T908] (stack is not available)
[  155.520452][  T908]
[  155.520729][  T908] The buggy address belongs to the object at ffff8880608a6ac0
[  155.520729][  T908]  which belongs to the cache names_cache of size 4096
[  155.522387][  T908] The buggy address is located 512 bytes inside of
[  155.522387][  T908]  4096-byte region [ffff8880608a6ac0, ffff8880608a7ac0)
[  155.523920][  T908] The buggy address belongs to the page:
[  155.524552][  T908] page:ffffea0001822800 refcount:1 mapcount:0 mapping:ffff88806c657cc0 index:0x0 compound_mapcount:0
[  155.525836][  T908] flags: 0x100000000010200(slab|head)
[  155.526445][  T908] raw: 0100000000010200 ffffea0001813808 ffffea0001a26c08 ffff88806c657cc0
[  155.527424][  T908] raw: 0000000000000000 0000000000070007 00000001ffffffff 0000000000000000
[  155.528429][  T908] page dumped because: kasan: bad access detected
[  155.529158][  T908]
[  155.529410][  T908] Memory state around the buggy address:
[  155.530060][  T908]  ffff8880608a6b80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  155.530971][  T908]  ffff8880608a6c00: fb fb fb fb fb f1 f1 f1 f1 00 f2 f2 f2 f3 f3 f3
[  155.531889][  T908] >ffff8880608a6c80: f3 fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  155.532806][  T908]                                            ^
[  155.533509][  T908]  ffff8880608a6d00: fb fb fb fb fb fb fb fb fb f1 f1 f1 f1 00 00 00
[  155.534436][  T908]  ffff8880608a6d80: f2 f3 f3 f3 f3 fb fb fb 00 00 00 00 00 00 00 00
[ ... ]
Signed-off-by: NTaehee Yoo <ap420073@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now that we have a 3rd extension, add a new helper that drops the
extension space and use it when we need to scrub an sk_buff.

At this time, scrubbing clears secpath and bridge netfilter data, but
retains the tc skb extension, after this patch all three get cleared.

NAPI reuse/free assumes we can only have a secpath attached to skb, but
it seems better to clear all extensions there as well.

v2: add unlikely hint (Eric Dumazet)

Fixes: 95a7233c ("net: openvswitch: Set OvS recirc_id from tc chain index")
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The test implemented by some_qdisc_is_busy() is somewhat loosy for
NOLOCK qdisc, as we may hit the following scenario:

CPU1						CPU2
// in net_tx_action()
clear_bit(__QDISC_STATE_SCHED...);
						// in some_qdisc_is_busy()
						val = (qdisc_is_running(q) ||
						       test_bit(__QDISC_STATE_SCHED,
								&q->state));
						// here val is 0 but...
qdisc_run(q)
// ... CPU1 is going to run the qdisc next

As a conseguence qdisc_run() in net_tx_action() can race with qdisc_reset()
in dev_qdisc_reset(). Such race is not possible for !NOLOCK qdisc as
both the above bit operations are under the root qdisc lock().

After commit 021a17ed ("pfifo_fast: drop unneeded additional lock on dequeue")
the race can cause use after free and/or null ptr dereference, but the root
cause is likely older.

This patch addresses the issue explicitly checking for deactivation under
the seqlock for NOLOCK qdisc, so that the qdisc_run() in the critical
scenario becomes a no-op.

Note that the enqueue() op can still execute concurrently with dev_qdisc_reset(),
but that is safe due to the skb_array() locking, and we can't avoid that
for NOLOCK qdiscs.

Fixes: 021a17ed ("pfifo_fast: drop unneeded additional lock on dequeue")
Reported-by: NLi Shuang <shuali@redhat.com>
Reported-and-tested-by: NDavide Caratti <dcaratti@redhat.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In event of failure during register_netdevice, free_netdev is
invoked immediately. free_netdev assumes that all the netdevice
refcounts have been dropped prior to it being called and as a
result frees and clears out the refcount pointer.

However, this is not necessarily true as some of the operations
in the NETDEV_UNREGISTER notifier handlers queue RCU callbacks for
invocation after a grace period. The IPv4 callback in_dev_rcu_put
tries to access the refcount after free_netdev is called which
leads to a null de-reference-

44837.761523:   <6> Unable to handle kernel paging request at
                    virtual address 0000004a88287000
44837.761651:   <2> pc : in_dev_finish_destroy+0x4c/0xc8
44837.761654:   <2> lr : in_dev_finish_destroy+0x2c/0xc8
44837.762393:   <2> Call trace:
44837.762398:   <2>  in_dev_finish_destroy+0x4c/0xc8
44837.762404:   <2>  in_dev_rcu_put+0x24/0x30
44837.762412:   <2>  rcu_nocb_kthread+0x43c/0x468
44837.762418:   <2>  kthread+0x118/0x128
44837.762424:   <2>  ret_from_fork+0x10/0x1c

Fix this by waiting for the completion of the call_rcu() in
case of register_netdevice errors.

Fixes: 93ee31f1 ("[NET]: Fix free_netdev on register_netdev failure.")
Cc: Sean Tranchetti <stranche@codeaurora.org>
Signed-off-by: NSubash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Don't uninstall an XDP program when none is installed, and don't install
an XDP program that has the same ID as the one already installed.

dev_change_xdp_fd doesn't perform any checks in case it uninstalls an
XDP program. It means that the driver's ndo_bpf can be called with
XDP_SETUP_PROG asking to set it to NULL even if it's already NULL. This
case happens if the user runs `ip link set eth0 xdp off` when there is
no XDP program attached.

The symmetrical case is possible when the user tries to set the program
that is already set.

The drivers typically perform some heavy operations on XDP_SETUP_PROG,
so they all have to handle these cases internally to return early if
they happen. This patch puts this check into the kernel code, so that
all drivers will benefit from it.
Signed-off-by: NMaxim Mikityanskiy <maximmi@mellanox.com>
Acked-by: NJonathan Lemon <jonathan.lemon@gmail.com>
Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

When GRO decides not to coalesce a packet, in napi_frags_finish(), instead
 of passing it to the stack immediately, place it on a list in the napi
 struct.  Then, at flush time (napi_complete_done(), napi_poll(), or
 napi_busy_loop()), call netif_receive_skb_list_internal() on the list.
We'd like to do that in napi_gro_flush(), but it's not called if
 !napi->gro_bitmask, so we have to do it in the callers instead.  (There are
 a handful of drivers that call napi_gro_flush() themselves, but it's not
 clear why, or whether this will affect them.)
Because a full 64 packets is an inefficiently large batch, also consume the
 list whenever it exceeds gro_normal_batch, a new net/core sysctl that
 defaults to 8.
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When generic-XDP was moved to a later processing step by commit
458bf2f2 ("net: core: support XDP generic on stacked devices.")
a regression was introduced when using bpf_xdp_adjust_head.

The issue is that after this commit the skb->network_header is now
changed prior to calling generic XDP and not after. Thus, if the header
is changed by XDP (via bpf_xdp_adjust_head), then skb->network_header
also need to be updated again.  Fix by calling skb_reset_network_header().

Fixes: 458bf2f2 ("net: core: support XDP generic on stacked devices.")
Reported-by: NBrandon Cazander <brandon.cazander@multapplied.net>
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use accessor functions for skb fragment's page_offset instead
of direct references, in preparation for bvec conversion.
Signed-off-by: NJonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit aca51397 ("netns: Fix arbitrary net_device-s corruptions
on net_ns stop.") introduced a possibility to hit a BUG in case device
is returning back to init_net and two following conditions are met:
1) dev->ifindex value is used in a name of another "dev%d"
   device in init_net.
2) dev->name is used by another device in init_net.

Under real life circumstances this is hard to get. Therefore this has
been present happily for over 10 years. To reproduce:

$ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 86:89:3f:86:61:29 brd ff:ff:ff:ff:ff:ff
3: enp0s2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff
$ ip netns add ns1
$ ip -n ns1 link add dummy1ns1 type dummy
$ ip -n ns1 link add dummy2ns1 type dummy
$ ip link set enp0s2 netns ns1
$ ip -n ns1 link set enp0s2 name dummy0
[  100.858894] virtio_net virtio0 dummy0: renamed from enp0s2
$ ip link add dev4 type dummy
$ ip -n ns1 a
1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: dummy1ns1: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 16:63:4c:38:3e:ff brd ff:ff:ff:ff:ff:ff
3: dummy2ns1: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether aa:9e:86:dd:6b:5d brd ff:ff:ff:ff:ff:ff
4: dummy0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff
$ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 86:89:3f:86:61:29 brd ff:ff:ff:ff:ff:ff
4: dev4: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 5a:e1:4a:b6:ec:f8 brd ff:ff:ff:ff:ff:ff
$ ip netns del ns1
[  158.717795] default_device_exit: failed to move dummy0 to init_net: -17
[  158.719316] ------------[ cut here ]------------
[  158.720591] kernel BUG at net/core/dev.c:9824!
[  158.722260] invalid opcode: 0000 [#1] SMP KASAN PTI
[  158.723728] CPU: 0 PID: 56 Comm: kworker/u2:1 Not tainted 5.3.0-rc1+ #18
[  158.725422] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014
[  158.727508] Workqueue: netns cleanup_net
[  158.728915] RIP: 0010:default_device_exit.cold+0x1d/0x1f
[  158.730683] Code: 84 e8 18 c9 3e fe 0f 0b e9 70 90 ff ff e8 36 e4 52 fe 89 d9 4c 89 e2 48 c7 c6 80 d6 25 84 48 c7 c7 20 c0 25 84 e8 f4 c8 3e
[  158.736854] RSP: 0018:ffff8880347e7b90 EFLAGS: 00010282
[  158.738752] RAX: 000000000000003b RBX: 00000000ffffffef RCX: 0000000000000000
[  158.741369] RDX: 0000000000000000 RSI: ffffffff8128013d RDI: ffffed10068fcf64
[  158.743418] RBP: ffff888033550170 R08: 000000000000003b R09: fffffbfff0b94b9c
[  158.745626] R10: fffffbfff0b94b9b R11: ffffffff85ca5cdf R12: ffff888032f28000
[  158.748405] R13: dffffc0000000000 R14: ffff8880335501b8 R15: 1ffff110068fcf72
[  158.750638] FS:  0000000000000000(0000) GS:ffff888036000000(0000) knlGS:0000000000000000
[  158.752944] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  158.755245] CR2: 00007fe8b45d21d0 CR3: 00000000340b4005 CR4: 0000000000360ef0
[  158.757654] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  158.760012] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  158.762758] Call Trace:
[  158.763882]  ? dev_change_net_namespace+0xbb0/0xbb0
[  158.766148]  ? devlink_nl_cmd_set_doit+0x520/0x520
[  158.768034]  ? dev_change_net_namespace+0xbb0/0xbb0
[  158.769870]  ops_exit_list.isra.0+0xa8/0x150
[  158.771544]  cleanup_net+0x446/0x8f0
[  158.772945]  ? unregister_pernet_operations+0x4a0/0x4a0
[  158.775294]  process_one_work+0xa1a/0x1740
[  158.776896]  ? pwq_dec_nr_in_flight+0x310/0x310
[  158.779143]  ? do_raw_spin_lock+0x11b/0x280
[  158.780848]  worker_thread+0x9e/0x1060
[  158.782500]  ? process_one_work+0x1740/0x1740
[  158.784454]  kthread+0x31b/0x420
[  158.786082]  ? __kthread_create_on_node+0x3f0/0x3f0
[  158.788286]  ret_from_fork+0x3a/0x50
[  158.789871] ---[ end trace defd6c657c71f936 ]---
[  158.792273] RIP: 0010:default_device_exit.cold+0x1d/0x1f
[  158.795478] Code: 84 e8 18 c9 3e fe 0f 0b e9 70 90 ff ff e8 36 e4 52 fe 89 d9 4c 89 e2 48 c7 c6 80 d6 25 84 48 c7 c7 20 c0 25 84 e8 f4 c8 3e
[  158.804854] RSP: 0018:ffff8880347e7b90 EFLAGS: 00010282
[  158.807865] RAX: 000000000000003b RBX: 00000000ffffffef RCX: 0000000000000000
[  158.811794] RDX: 0000000000000000 RSI: ffffffff8128013d RDI: ffffed10068fcf64
[  158.816652] RBP: ffff888033550170 R08: 000000000000003b R09: fffffbfff0b94b9c
[  158.820930] R10: fffffbfff0b94b9b R11: ffffffff85ca5cdf R12: ffff888032f28000
[  158.825113] R13: dffffc0000000000 R14: ffff8880335501b8 R15: 1ffff110068fcf72
[  158.829899] FS:  0000000000000000(0000) GS:ffff888036000000(0000) knlGS:0000000000000000
[  158.834923] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  158.838164] CR2: 00007fe8b45d21d0 CR3: 00000000340b4005 CR4: 0000000000360ef0
[  158.841917] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  158.845149] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

Fix this by checking if a device with the same name exists in init_net
and fallback to original code - dev%d to allocate name - in case it does.

This was found using syzkaller.

Fixes: aca51397 ("netns: Fix arbitrary net_device-s corruptions on net_ns stop.")
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

skb_warn_bad_offload and netdev_rx_csum_fault trigger on hard to debug
issues. Dump more state and the header.

Optionally dump the entire packet and linear segment. This is required
to debug checksum bugs that may include bytes past skb_tail_pointer().

Both call sites call this function inside a net_ratelimit() block.
Limit full packet log further to a hard limit of can_dump_full (5).

Based on an earlier patch by Cong Wang, see link below.

Changes v1 -> v2
  - dump frag_list only on full_pkt

Link: https://patchwork.ozlabs.org/patch/1000841/Signed-off-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The TC_ACT_REINSERT return type was added as an in-kernel only option to
allow a packet ingress or egress redirect. This is used to avoid
unnecessary skb clones in situations where they are not required. If a TC
hook returns this code then the packet is 'reinserted' and no skb consume
is carried out as no clone took place.

This return type is only used in act_mirred. Rather than have the reinsert
called from the main datapath, call it directly in act_mirred. Instead of
returning TC_ACT_REINSERT, change the type to the new TC_ACT_CONSUMED
which tells the caller that the packet has been stolen by another process
and that no consume call is required.

Moving all redirect calls to the act_mirred code is in preparation for
tracking recursion created by act_mirred.
Signed-off-by: NJohn Hurley <john.hurley@netronome.com>
Reviewed-by: NSimon Horman <simon.horman@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When stack receives pkt: [802.1P vlan 0][802.1AD vlan 100][IPv4],
vlan_do_receive() returns false if it does not find vlan_dev. Later
__netif_receive_skb_core() fails to find packet type handler for
skb->protocol 801.1AD and drops the packet.

801.1P header with vlan id 0 should be handled as untagged packets.
This patch fixes it by checking if vlan_id is 0 and processes next vlan
header.
Signed-off-by: NGovindarajulu Varadarajan <gvaradar@cisco.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As Eric noted, the current wrapper for ptype func hook inside
__netif_receive_skb_list_ptype() has no chance of avoiding the indirect
call: we enter such code path only for protocols other than ipv4 and
ipv6.

Instead we can wrap the list_func invocation.

v1 -> v2:
 - use the correct fix tag

Fixes: f5737cba ("net: use indirect calls helpers for ptype hook")
Suggested-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Acked-by: NEdward Cree <ecree@solarflare.com>
Reviewed-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If a network driver provides to napi_gro_frags() an
skb with a page fragment of exactly 14 bytes, the call
to gro_pull_from_frag0() will 'consume' the fragment
by calling skb_frag_unref(skb, 0), and the page might
be freed and reused.

Reading eth->h_proto at the end of napi_frags_skb() might
read mangled data, or crash under specific debugging features.

BUG: KASAN: use-after-free in napi_frags_skb net/core/dev.c:5833 [inline]
BUG: KASAN: use-after-free in napi_gro_frags+0xc6f/0xd10 net/core/dev.c:5841
Read of size 2 at addr ffff88809366840c by task syz-executor599/8957

CPU: 1 PID: 8957 Comm: syz-executor599 Not tainted 5.2.0-rc1+ #32
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:188
 __kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
 kasan_report+0x12/0x20 mm/kasan/common.c:614
 __asan_report_load_n_noabort+0xf/0x20 mm/kasan/generic_report.c:142
 napi_frags_skb net/core/dev.c:5833 [inline]
 napi_gro_frags+0xc6f/0xd10 net/core/dev.c:5841
 tun_get_user+0x2f3c/0x3ff0 drivers/net/tun.c:1991
 tun_chr_write_iter+0xbd/0x156 drivers/net/tun.c:2037
 call_write_iter include/linux/fs.h:1872 [inline]
 do_iter_readv_writev+0x5f8/0x8f0 fs/read_write.c:693
 do_iter_write fs/read_write.c:970 [inline]
 do_iter_write+0x184/0x610 fs/read_write.c:951
 vfs_writev+0x1b3/0x2f0 fs/read_write.c:1015
 do_writev+0x15b/0x330 fs/read_write.c:1058

Fixes: a50e233c ("net-gro: restore frag0 optimization")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NAllison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

When a device is stacked like (team, bonding, failsafe or netvsc) the
XDP generic program for the parent device was not called.

Move the call to XDP generic inside __netif_receive_skb_core where
it can be done multiple times for stacked case.

Fixes: d4455169 ("net: xdp: support xdp generic on virtual devices")
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When host is under high stress, it is very possible thread
running netdev_wait_allrefs() returns from msleep(250)
10 seconds late.

This leads to these messages in the syslog :

[...] unregister_netdevice: waiting for syz_tun to become free. Usage count = 0

If the device refcount is zero, the wait is over.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This avoids an indirect call per RX IPv6/IPv4 packet.
Note that we don't want to use the indirect calls helper for taps.
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a netdev appears through hot plug then gets enslaved by a failover
master that is already up and running, the slave will be opened
right away after getting enslaved. Today there's a race that userspace
(udev) may fail to rename the slave if the kernel (net_failover)
opens the slave earlier than when the userspace rename happens.
Unlike bond or team, the primary slave of failover can't be renamed by
userspace ahead of time, since the kernel initiated auto-enslavement is
unable to, or rather, is never meant to be synchronized with the rename
request from userspace.

As the failover slave interfaces are not designed to be operated
directly by userspace apps: IP configuration, filter rules with
regard to network traffic passing and etc., should all be done on master
interface. In general, userspace apps only care about the
name of master interface, while slave names are less important as long
as admin users can see reliable names that may carry
other information describing the netdev. For e.g., they can infer that
"ens3nsby" is a standby slave of "ens3", while for a
name like "eth0" they can't tell which master it belongs to.

Historically the name of IFF_UP interface can't be changed because
there might be admin script or management software that is already
relying on such behavior and assumes that the slave name can't be
changed once UP. But failover is special: with the in-kernel
auto-enslavement mechanism, the userspace expectation for device
enumeration and bring-up order is already broken. Previously initramfs
and various userspace config tools were modified to bypass failover
slaves because of auto-enslavement and duplicate MAC address. Similarly,
in case that users care about seeing reliable slave name, the new type
of failover slaves needs to be taken care of specifically in userspace
anyway.

It's less risky to lift up the rename restriction on failover slave
which is already UP. Although it's possible this change may potentially
break userspace component (most likely configuration scripts or
management software) that assumes slave name can't be changed while
UP, it's relatively a limited and controllable set among all userspace
components, which can be fixed specifically to listen for the rename
events on failover slaves. Userspace component interacting with slaves
is expected to be changed to operate on failover master interface
instead, as the failover slave is dynamic in nature which may come and
go at any point.  The goal is to make the role of failover slaves less
relevant, and userspace components should only deal with failover master
in the long run.

Fixes: 30c8bd5a ("net: Introduce generic failover module")
Signed-off-by: NSi-Wei Liu <si-wei.liu@oracle.com>
Reviewed-by: NLiran Alon <liran.alon@oracle.com>
Acked-by: NSridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Introduce devlink_compat_switch_id_get() helper which fills up switch_id
according to passed netdev pointer. Call it directly from
dev_get_port_parent_id() as a fallback when ndo_get_port_parent_id
is not defined for given netdev.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This header is not in use - remove it.
Signed-off-by: NYuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This fills a hole in softnet data, so no change in structure size.

Also prepares for xmit_more placement in the same spot;
skb->xmit_more will be removed in followup patch.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

__netif_receive_skb_list_ptype() leaves skb->next poisoned before passing
it to pt_prev->func handler, what may produce (in certain cases, e.g. DSA
setup) crashes like:

[ 88.606777] CPU 0 Unable to handle kernel paging request at virtual address 0000000e, epc == 80687078, ra == 8052cc7c
[ 88.618666] Oops[#1]:
[ 88.621196] CPU: 0 PID: 0 Comm: swapper Not tainted 5.1.0-rc2-dlink-00206-g4192a172-dirty #1473
[ 88.630885] $ 0 : 00000000 10000400 00000002 864d7850
[ 88.636709] $ 4 : 87c0ddf0 864d7800 87c0ddf0 00000000
[ 88.642526] $ 8 : 00000000 49600000 00000001 00000001
[ 88.648342] $12 : 00000000 c288617b dadbee27 25d17c41
[ 88.654159] $16 : 87c0ddf0 85cff080 80790000 fffffffd
[ 88.659975] $20 : 80797b20 ffffffff 00000001 864d7800
[ 88.665793] $24 : 00000000 8011e658
[ 88.671609] $28 : 80790000 87c0dbc0 87cabf00 8052cc7c
[ 88.677427] Hi : 00000003
[ 88.680622] Lo : 7b5b4220
[ 88.683840] epc : 80687078 vlan_dev_hard_start_xmit+0x1c/0x1a0
[ 88.690532] ra : 8052cc7c dev_hard_start_xmit+0xac/0x188
[ 88.696734] Status: 10000404	IEp
[ 88.700422] Cause : 50000008 (ExcCode 02)
[ 88.704874] BadVA : 0000000e
[ 88.708069] PrId : 0001a120 (MIPS interAptiv (multi))
[ 88.713005] Modules linked in:
[ 88.716407] Process swapper (pid: 0, threadinfo=(ptrval), task=(ptrval), tls=00000000)
[ 88.725219] Stack : 85f61c28 00000000 0000000e 80780000 87c0ddf0 85cff080 80790000 8052cc7c
[ 88.734529] 87cabf00 00000000 00000001 85f5fb40 807b0000 864d7850 87cabf00 807d0000
[ 88.743839] 864d7800 8655f600 00000000 85cff080 87c1c000 0000006a 00000000 8052d96c
[ 88.753149] 807a0000 8057adb8 87c0dcc8 87c0dc50 85cfff08 00000558 87cabf00 85f58c50
[ 88.762460] 00000002 85f58c00 864d7800 80543308 fffffff4 00000001 85f58c00 864d7800
[ 88.771770] ...
[ 88.774483] Call Trace:
[ 88.777199] [<80687078>] vlan_dev_hard_start_xmit+0x1c/0x1a0
[ 88.783504] [<8052cc7c>] dev_hard_start_xmit+0xac/0x188
[ 88.789326] [<8052d96c>] __dev_queue_xmit+0x6e8/0x7d4
[ 88.794955] [<805a8640>] ip_finish_output2+0x238/0x4d0
[ 88.800677] [<805ab6a0>] ip_output+0xc8/0x140
[ 88.805526] [<805a68f4>] ip_forward+0x364/0x560
[ 88.810567] [<805a4ff8>] ip_rcv+0x48/0xe4
[ 88.815030] [<80528d44>] __netif_receive_skb_one_core+0x44/0x58
[ 88.821635] [<8067f220>] dsa_switch_rcv+0x108/0x1ac
[ 88.827067] [<80528f80>] __netif_receive_skb_list_core+0x228/0x26c
[ 88.833951] [<8052ed84>] netif_receive_skb_list+0x1d4/0x394
[ 88.840160] [<80355a88>] lunar_rx_poll+0x38c/0x828
[ 88.845496] [<8052fa78>] net_rx_action+0x14c/0x3cc
[ 88.850835] [<806ad300>] __do_softirq+0x178/0x338
[ 88.856077] [<8012a2d4>] irq_exit+0xbc/0x100
[ 88.860846] [<802f8b70>] plat_irq_dispatch+0xc0/0x144
[ 88.866477] [<80105974>] handle_int+0x14c/0x158
[ 88.871516] [<806acfb0>] r4k_wait+0x30/0x40
[ 88.876462] Code: afb10014 8c8200a0 00803025 <9443000c> 94a20468 00000000 10620042 00a08025 9605046a
[ 88.887332]
[ 88.888982] ---[ end trace eb863d007da11cf1 ]---
[ 88.894122] Kernel panic - not syncing: Fatal exception in interrupt
[ 88.901202] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---

Fix this by pulling skb off the sublist and zeroing skb->next pointer
before calling ptype callback.

Fixes: 88eb1944 ("net: core: propagate SKB lists through packet_type lookup")
Reviewed-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NAlexander Lobakin <alobakin@dlink.ru>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Introduce devlink_compat_phys_port_name_get() helper that
gets the physical port name for specified netdevice
according to devlink port attributes.
Call this helper from dev_get_phys_port_name()
in case ndo_get_phys_port_name is not defined.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We prefer static_branch_unlikely() over static_key_false() these days.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NSoheil Hassas Yeganeh <soheil@google.com>
Acked-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With commit c5ad119f ("net: sched: pfifo_fast use skb_array")
pfifo_fast no longer benefit from the TCQ_F_CAN_BYPASS optimization.
Due to retpolines the cost of the enqueue()/dequeue() pair has become
relevant and we observe measurable regression for the uncontended
scenario when the packet-rate is below line rate.

After commit 46b1c18f ("net: sched: put back q.qlen into a
single location") we can check for empty qdisc with a reasonably
fast operation even for nolock qdiscs.

This change extends TCQ_F_CAN_BYPASS support to nolock qdisc.
The new chunk of code mirrors closely the existing one for traditional
qdisc, leveraging a newly introduced helper to read atomically the
qdisc length.

Tested with pktgen in queue xmit mode, with pfifo_fast, a MQ
device, and MQ root qdisc:

threads         vanilla         patched
                kpps            kpps
1               2465            2889
2               4304            5188
4               7898            9589

Same as above, but with a single queue device:

threads         vanilla         patched
                kpps            kpps
1               2556            2827
2               2900            2900
4               5000            5000
8               4700            4700

No mesaurable changes in the contended scenarios, and more 10%
improvement in the uncontended ones.

 v1 -> v2:
  - rebased after flag name change
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Tested-by: NIvan Vecera <ivecera@redhat.com>
Reviewed-by: NEric Dumazet <edumazet@google.com>
Reviewed-by: NIvan Vecera <ivecera@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After the previous patch, all the callers of ndo_select_queue()
provide as a 'fallback' argument netdev_pick_tx.
The only exceptions are nested calls to ndo_select_queue(),
which pass down the 'fallback' available in the current scope
- still netdev_pick_tx.

We can drop such argument and replace fallback() invocation with
netdev_pick_tx(). This avoids an indirect call per xmit packet
in some scenarios (TCP syn, UDP unconnected, XDP generic, pktgen)
with device drivers implementing such ndo. It also clean the code
a bit.

Tested with ixgbe and CONFIG_FCOE=m

With pktgen using queue xmit:
threads		vanilla 	patched
		(kpps)		(kpps)
1		2334		2428
2		4166		4278
4		7895		8100

 v1 -> v2:
 - rebased after helper's name change
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently packet_pick_tx_queue() is the only caller of
ndo_select_queue() using a fallback argument other than
netdev_pick_tx.

Leveraging rx queue, we can obtain a similar queue selection
behavior using core helpers. After this change, ndo_select_queue()
is always invoked with netdev_pick_tx() as fallback.
We can change ndo_select_queue() signature in a followup patch,
dropping an indirect call per transmitted packet in some scenarios
(e.g. TCP syn and XDP generic xmit)

This changes slightly how af packet queue selection happens when
PACKET_QDISC_BYPASS is set. It's now more similar to plan dev_queue_xmit()
tacking in account both XPS and TC mapping.

 v1  -> v2:
  - rebased after helper name change
 RFC -> v1:
  - initialize sender_cpu to the expected value
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With the following patches, we are going to use __netdev_pick_tx() in
many modules. Rename it to netdev_pick_tx(), to make it clear is
a public API.

Also rename the existing netdev_pick_tx() to netdev_core_pick_tx(),
to avoid name clashes.
Suggested-by: NEric Dumazet <edumazet@google.com>
Suggested-by: NDavid Miller <davem@davemloft.net>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Introduce dev_change_proto_down_generic, a generic ndo_change_proto_down
implementation, which sets the netdev carrier state according to proto_down.

This adds the ability to set protodown on vxlan and macvlan devices in a
generic way for use by control protocols like VRRPD.
Signed-off-by: NAndy Roulin <aroulin@cumulusnetworks.com>
Acked-by: NRoopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

qdisc_pkt_len_init expects transport_header to be set for GSO packets.
Patch [1] skips transport_header validation for GSO packets that don't
have network_header set at the moment of calling virtio_net_hdr_to_skb,
and allows them to pass into the stack. After patch [2] no placeholder
value is assigned to transport_header if dissection fails, so this patch
adds a check to the place where the value of transport_header is used.

[1] https://patchwork.ozlabs.org/patch/1044429/
[2] https://patchwork.ozlabs.org/patch/1046122/Signed-off-by: NMaxim Mikityanskiy <maximmi@mellanox.com>
Acked-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The features attribute is of type u64 and stored in the native endianes on
the system. The for_each_set_bit() macro takes a pointer to a 32 bit array
and goes over the bits in this area. On little Endian systems this also
works with an u64 as the most significant bit is on the highest address,
but on big endian the words are swapped. When we expect bit 15 here we get
bit 47 (15 + 32).

This patch converts it more or less to its own for_each_set_bit()
implementation which works on 64 bit integers directly. This is then
completely in host endianness and should work like expected.

Fixes: fd867d51 ("net/core: generic support for disabling netdev features down stack")
Signed-off-by: NHauke Mehrtens <hauke.mehrtens@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In preparation for getting rid of switchdev_ops, create a dedicated NDO
operation for getting the port's parent identifier. There are
essentially two classes of drivers that need to implement getting the
port's parent ID which are VF/PF drivers with a built-in switch, and
pure switchdev drivers such as mlxsw, ocelot, dsa etc.

We introduce a helper function: dev_get_port_parent_id() which supports
recursion into the lower devices to obtain the first port's parent ID.

Convert the bridge, core and ipv4 multicast routing code to check for
such ndo_get_port_parent_id() and call the helper function when valid
before falling back to switchdev_port_attr_get(). This will allow us to
convert all relevant drivers in one go instead of having to implement
both switchdev_port_attr_get() and ndo_get_port_parent_id() operations,
then get rid of switchdev_port_attr_get().
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since commit a25717d2 ("xdp: support simultaneous driver and
hw XDP attachment") users can load an XDP program for offload and
in native driver mode simultaneously.  Allow a similar mix of
offload and SKB mode/generic XDP.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NQuentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

In order to provide more meaningful messages to user when the process of
loading xdp program onto network interface failed, let's add extack
messages within dev_change_xdp_fd.
Suggested-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>