stable inclusion
from stable-v5.10.112
commit 43666798059c7cb5c374ce1f79f51e147aa5d419
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5HL0X

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=43666798059c7cb5c374ce1f79f51e147aa5d419

--------------------------------

[ Upstream commit b6cae15b ]

When reading a packet from a host-to-guest ring buffer, there is no
memory barrier between reading the write index (to see if there is
a packet to read) and reading the contents of the packet. The Hyper-V
host uses store-release when updating the write index to ensure that
writes of the packet data are completed first. On the guest side,
the processor can reorder and read the packet data before the write
index, and sometimes get stale packet data. Getting such stale packet
data has been observed in a reproducible case in a VM on ARM64.

Fix this by using virt_load_acquire() to read the write index,
ensuring that reads of the packet data cannot be reordered
before it. Preventing such reordering is logically correct, and
with this change, getting stale data can no longer be reproduced.
Signed-off-by: NMichael Kelley <mikelley@microsoft.com>
Reviewed-by: NAndrea Parri (Microsoft) <parri.andrea@gmail.com>
Link: https://lore.kernel.org/r/1648394710-33480-1-git-send-email-mikelley@microsoft.comSigned-off-by: NWei Liu <wei.liu@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.112
commit 1d7a5aae884ca727d41c7ed15d4c82fdb67c040c
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5HL0X

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=1d7a5aae884ca727d41c7ed15d4c82fdb67c040c

--------------------------------

[ Upstream commit ebbb7bb9 ]

As the kmalloc_array() may return null, the 'event_waiters[i].wait' would lead to null-pointer dereference.
Therefore, it is better to check the return value of kmalloc_array() to avoid this confusion.
Signed-off-by: NQintaoShen <unSimple1993@163.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.112
commit e5afacc826a80cd82ac3f9eb26bc80e45cd14c20
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5HL0X

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=e5afacc826a80cd82ac3f9eb26bc80e45cd14c20

--------------------------------

[ Upstream commit 6ea239ad ]

Prior to disabling dpg, VCN need unpausing dpg mode, or VCN will hang in
S3 resuming.
Reviewed-by: NJames Zhu <James.Zhu@amd.com>
Signed-off-by: NTianci Yin <tianci.yin@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.112
commit d2e0931e6d84d133a78b87b70d32d5776ee2b101
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5HL0X

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=d2e0931e6d84d133a78b87b70d32d5776ee2b101

--------------------------------

[ Upstream commit b7dfbd2e ]

Compute-only GPUs have more than 8 VMIDs allocated to KFD. Fix
this by passing correct number of VMIDs to HWS

v2: squash in warning fix (Alex)
Signed-off-by: NTushar Patel <tushar.patel@amd.com>
Reviewed-by: NFelix Kuehling <felix.kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.112
commit 7fc0610ad8182d05596e671c950bca1f3921d5e0
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5HL0X

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=7fc0610ad8182d05596e671c950bca1f3921d5e0

--------------------------------

[ Upstream commit c9fbf643 ]

[Why & How]
The latest HDMI SPEC has updated the VTEM packet structure,
so change the VTEM Infopacket defined in the driver side to align
with the SPEC.
Reviewed-by: NChris Park <Chris.Park@amd.com>
Acked-by: NAlex Hung <alex.hung@amd.com>
Signed-off-by: NLeo (Hanghong) Ma <hanghong.ma@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.112
commit 6906e05cf3ad2cfe704eda003de59aa0cb89b291
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5HL0X

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=6906e05cf3ad2cfe704eda003de59aa0cb89b291

--------------------------------

[ Upstream commit 7d56a154 ]

[Why]
disable/enable leads FEC mismatch between hw/sw FEC state.

[How]
check FEC status to fastboot on/off.
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NAlex Hung <alex.hung@amd.com>
Signed-off-by: NChiawen Huang <chiawen.huang@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.112
commit 756c61c1680f435292b7d06072a8f390f551bca6
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5HL0X

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=756c61c1680f435292b7d06072a8f390f551bca6

--------------------------------

[ Upstream commit 5e8a71cf ]

[why]
for the case edid change only changed audio format.
driver still need to update stream.
Reviewed-by: NAlvin Lee <Alvin.Lee2@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NAlex Hung <alex.hung@amd.com>
Signed-off-by: NCharlene Liu <Charlene.Liu@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.112
commit 76e086ce7b2d71b0d7a1a121c5f53b5fa07c1c8c
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5HL0X

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=76e086ce7b2d71b0d7a1a121c5f53b5fa07c1c8c

--------------------------------

[ Upstream commit a7d16d9a ]

This is a long time leftover from when I originally added the free space
inode, the point was to catch cases where we weren't honoring the NOCOW
flag.  However there exists a race with relocation, if we allocate our
free space inode in a block group that is about to be relocated, we
could trigger the COW path before the relocation has the opportunity to
find the extents and delete the free space cache.  In production where
we have auto-relocation enabled we're seeing this WARN_ON_ONCE() around
5k times in a 2 week period, so not super common but enough that it's at
the top of our metrics.

We're properly handling the error here, and with us phasing out v1 space
cache anyway just drop the WARN_ON_ONCE.
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.112
commit 217190dc66efdf58e04a5c1f239f330c4c47d81b
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5HL0X

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=217190dc66efdf58e04a5c1f239f330c4c47d81b

--------------------------------

[ Upstream commit 05fd9564 ]

Since the initial introduction of (posix) fallocate back at the turn of
the century, it has been possible to use this syscall to change the
user-visible contents of files.  This can happen by extending the file
size during a preallocation, or through any of the newer modes (punch,
zero range).  Because the call can be used to change file contents, we
should treat it like we do any other modification to a file -- update
the mtime, and drop set[ug]id privileges/capabilities.

The VFS function file_modified() does all this for us if pass it a
locked inode, so let's make fallocate drop permissions correctly.
Reviewed-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.112
commit 9b5d1b3413d784fea12c387c27dbd10e3446e404
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5HL0X

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=9b5d1b3413d784fea12c387c27dbd10e3446e404

--------------------------------

[ Upstream commit c5c948aa ]

[Why&How] Add a dedicated AMDGPU specific ID for use with
newer ASICs that support USB-C output
Signed-off-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.112
commit 6f9c06501d288c96ebfb651443dd365b0aca3757
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5HL0X

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=6f9c06501d288c96ebfb651443dd365b0aca3757

--------------------------------

[ Upstream commit 2df3fc4a ]

It turns out after digging deeper into this bug, that it was being
triggered by GCC12 failing to call the bcmgenet_enable_dma()
routine. Given that a gcc12 fix has been merged [1] and the genet
driver now works properly when built with gcc12, this commit should
be reverted.

[1]
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105160
https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=aabb9a261ef060cf24fd626713f1d7d9df81aa57

Fixes: 8d3ea3d4 ("net: bcmgenet: Use stronger register read/writes to assure ordering")
Signed-off-by: NJeremy Linton <jeremy.linton@arm.com>
Acked-by: NFlorian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220412210420.1129430-1-jeremy.linton@arm.comSigned-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.112
commit 504c15f07f541f87185113ccd485a814adf31e4f
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5HL0X

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=504c15f07f541f87185113ccd485a814adf31e4f

--------------------------------

[ Upstream commit ce40426f ]

Mixing sched_clock() and ktime_get_ns() usage will give bad results.

Switch hst_select_path() from using sched_clock() to ktime_get_ns().
Also rename path_service_time()'s 'sched_now' variable to 'now'.

Fixes: 2613eab1 ("dm mpath: add Historical Service Time Path Selector")
Signed-off-by: NKhazhismel Kumykov <khazhy@google.com>
Signed-off-by: NMike Snitzer <snitzer@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.112
commit 4e166a41180be2f1e66bbb6d46448e80a9a5ec05
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5HL0X

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=4e166a41180be2f1e66bbb6d46448e80a9a5ec05

--------------------------------

[ Upstream commit 64c4a37a ]

Smatch printed a warning:
	arch/x86/crypto/poly1305_glue.c:198 poly1305_update_arch() error:
	__memcpy() 'dctx->buf' too small (16 vs u32max)

It's caused because Smatch marks 'link_len' as untrusted since it comes
from sscanf(). Add a check to ensure that 'link_len' is not larger than
the size of the 'link_str' buffer.

Fixes: c69c1b6e ("cifs: implement CIFSParseMFSymlink()")
Signed-off-by: NHarshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: NRonnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: NSteve French <stfrench@microsoft.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.112
commit 67677050cecbe0edfdd81cd508415e9636ba7c65
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5HL0X

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=67677050cecbe0edfdd81cd508415e9636ba7c65

--------------------------------

[ Upstream commit ef27324e ]

Our detector found a concurrent use-after-free bug when detaching an
NCI device. The main reason for this bug is the unexpected scheduling
between the used delayed mechanism (timer and workqueue).

The race can be demonstrated below:

Thread-1                           Thread-2
                                 | nci_dev_up()
                                 |   nci_open_device()
                                 |     __nci_request(nci_reset_req)
                                 |       nci_send_cmd
                                 |         queue_work(cmd_work)
nci_unregister_device()          |
  nci_close_device()             | ...
    del_timer_sync(cmd_timer)[1] |
...                              | Worker
nci_free_device()                | nci_cmd_work()
  kfree(ndev)[3]                 |   mod_timer(cmd_timer)[2]

In short, the cleanup routine thought that the cmd_timer has already
been detached by [1] but the mod_timer can re-attach the timer [2], even
it is already released [3], resulting in UAF.

This UAF is easy to trigger, crash trace by POC is like below

[   66.703713] ==================================================================
[   66.703974] BUG: KASAN: use-after-free in enqueue_timer+0x448/0x490
[   66.703974] Write of size 8 at addr ffff888009fb7058 by task kworker/u4:1/33
[   66.703974]
[   66.703974] CPU: 1 PID: 33 Comm: kworker/u4:1 Not tainted 5.18.0-rc2 #5
[   66.703974] Workqueue: nfc2_nci_cmd_wq nci_cmd_work
[   66.703974] Call Trace:
[   66.703974]  <TASK>
[   66.703974]  dump_stack_lvl+0x57/0x7d
[   66.703974]  print_report.cold+0x5e/0x5db
[   66.703974]  ? enqueue_timer+0x448/0x490
[   66.703974]  kasan_report+0xbe/0x1c0
[   66.703974]  ? enqueue_timer+0x448/0x490
[   66.703974]  enqueue_timer+0x448/0x490
[   66.703974]  __mod_timer+0x5e6/0xb80
[   66.703974]  ? mark_held_locks+0x9e/0xe0
[   66.703974]  ? try_to_del_timer_sync+0xf0/0xf0
[   66.703974]  ? lockdep_hardirqs_on_prepare+0x17b/0x410
[   66.703974]  ? queue_work_on+0x61/0x80
[   66.703974]  ? lockdep_hardirqs_on+0xbf/0x130
[   66.703974]  process_one_work+0x8bb/0x1510
[   66.703974]  ? lockdep_hardirqs_on_prepare+0x410/0x410
[   66.703974]  ? pwq_dec_nr_in_flight+0x230/0x230
[   66.703974]  ? rwlock_bug.part.0+0x90/0x90
[   66.703974]  ? _raw_spin_lock_irq+0x41/0x50
[   66.703974]  worker_thread+0x575/0x1190
[   66.703974]  ? process_one_work+0x1510/0x1510
[   66.703974]  kthread+0x2a0/0x340
[   66.703974]  ? kthread_complete_and_exit+0x20/0x20
[   66.703974]  ret_from_fork+0x22/0x30
[   66.703974]  </TASK>
[   66.703974]
[   66.703974] Allocated by task 267:
[   66.703974]  kasan_save_stack+0x1e/0x40
[   66.703974]  __kasan_kmalloc+0x81/0xa0
[   66.703974]  nci_allocate_device+0xd3/0x390
[   66.703974]  nfcmrvl_nci_register_dev+0x183/0x2c0
[   66.703974]  nfcmrvl_nci_uart_open+0xf2/0x1dd
[   66.703974]  nci_uart_tty_ioctl+0x2c3/0x4a0
[   66.703974]  tty_ioctl+0x764/0x1310
[   66.703974]  __x64_sys_ioctl+0x122/0x190
[   66.703974]  do_syscall_64+0x3b/0x90
[   66.703974]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[   66.703974]
[   66.703974] Freed by task 406:
[   66.703974]  kasan_save_stack+0x1e/0x40
[   66.703974]  kasan_set_track+0x21/0x30
[   66.703974]  kasan_set_free_info+0x20/0x30
[   66.703974]  __kasan_slab_free+0x108/0x170
[   66.703974]  kfree+0xb0/0x330
[   66.703974]  nfcmrvl_nci_unregister_dev+0x90/0xd0
[   66.703974]  nci_uart_tty_close+0xdf/0x180
[   66.703974]  tty_ldisc_kill+0x73/0x110
[   66.703974]  tty_ldisc_hangup+0x281/0x5b0
[   66.703974]  __tty_hangup.part.0+0x431/0x890
[   66.703974]  tty_release+0x3a8/0xc80
[   66.703974]  __fput+0x1f0/0x8c0
[   66.703974]  task_work_run+0xc9/0x170
[   66.703974]  exit_to_user_mode_prepare+0x194/0x1a0
[   66.703974]  syscall_exit_to_user_mode+0x19/0x50
[   66.703974]  do_syscall_64+0x48/0x90
[   66.703974]  entry_SYSCALL_64_after_hwframe+0x44/0xae

To fix the UAF, this patch adds flush_workqueue() to ensure the
nci_cmd_work is finished before the following del_timer_sync.
This combination will promise the timer is actually detached.

Fixes: 6a2968aa ("NFC: basic NCI protocol implementation")
Signed-off-by: NLin Ma <linma@zju.edu.cn>
Reviewed-by: NKrzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.112
commit bfba9722cf2e801af181a56072f92f924ad7b156
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5HL0X

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=bfba9722cf2e801af181a56072f92f924ad7b156

--------------------------------

[ Upstream commit f034fc50 ]

Fix incorrect debug message:

   Attempting to add event pmu 'intel_pt' with '' that may result in
   non-fatal errors

which always appears with perf record -vv and intel_pt e.g.

    perf record -vv -e intel_pt//u uname

The message is incorrect because there will never be non-fatal errors.

Suppress the message if the PMU is 'selectable' i.e. meant to be
selected directly as an event.

Fixes: 4ac22b48 ("perf parse-events: Make add PMU verbose output clearer")
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20220411061758.2458417-1-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.112
commit 280f721edc54a782f1dfcec573ee929e92bf186a
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5HL0X

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=280f721edc54a782f1dfcec573ee929e92bf186a

--------------------------------

[ Upstream commit ce64763c ]

The selftest "mqueue/mq_perf_tests.c" use CPU_ALLOC to allocate
CPU set. This cpu set is used further in pthread_attr_setaffinity_np
and by pthread_create in the code. But in current code, allocated
cpu set is not freed.

Fix this issue by adding CPU_FREE in the "shutdown" function which
is called in most of the error/exit path for the cleanup. There are
few error paths which exit without using shutdown. Add a common goto
error path with CPU_FREE for these cases.

Fixes: 7820b071 ("tools/selftests: add mq_perf_tests")
Signed-off-by: NAthira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: NShuah Khan <skhan@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.112
commit eb8873b324d918eeaa572d08d1d05785f4fb1e0a
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5HL0X

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=eb8873b324d918eeaa572d08d1d05785f4fb1e0a

--------------------------------

[ Upstream commit 8467dda0 ]

Function sctp_do_peeloff() wrongly initializes daddr of the original
socket instead of the peeled off socket, which makes getpeername()
return zeroes instead of the primary address. Initialize the new socket
instead.

Fixes: d570ee49 ("[SCTP]: Correctly set daddr for IPv6 sockets during peeloff")
Signed-off-by: NPetr Malat <oss@malat.biz>
Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Link: https://lore.kernel.org/r/20220409063611.673193-1-oss@malat.bizSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.112
commit 45226fac4d316fea68357b307cb46a4aac764ec6
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5HL0X

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=45226fac4d316fea68357b307cb46a4aac764ec6

--------------------------------

[ Upstream commit 7c6e99c1 ]

If iscsid is doing a stop_conn at the same time the kernel is starting
error recovery we can hit a race that allows the cleanup work to run on a
valid connection. In the race, iscsi_if_stop_conn sees the cleanup bit set,
but it calls flush_work on the clean_work before iscsi_conn_error_event has
queued it. The flush then returns before the queueing and so the
cleanup_work can run later and disconnect/stop a conn while it's in a
connected state.

The patch:

Commit 0ab71045 ("scsi: iscsi: Perform connection failure entirely in
kernel space")

added the late stop_conn call bug originally, and the patch:

Commit 23d6fefb ("scsi: iscsi: Fix in-kernel conn failure handling")

attempted to fix it but only fixed the normal EH case and left the above
race for the iscsid restart case. For the normal EH case we don't hit the
race because we only signal userspace to start recovery after we have done
the queueing, so the flush will always catch the queued work or see it
completed.

For iscsid restart cases like boot, we can hit the race because iscsid will
call down to the kernel before the kernel has signaled any error, so both
code paths can be running at the same time. This adds a lock around the
setting of the cleanup bit and queueing so they happen together.

Link: https://lore.kernel.org/r/20220408001314.5014-6-michael.christie@oracle.com
Fixes: 0ab71045 ("scsi: iscsi: Perform connection failure entirely in kernel space")
Tested-by: NManish Rangankar <mrangankar@marvell.com>
Reviewed-by: NLee Duncan <lduncan@suse.com>
Reviewed-by: NChris Leech <cleech@redhat.com>
Signed-off-by: NMike Christie <michael.christie@oracle.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.112
commit 73805795c99ff32154c9e37c4334968c037c0f7f
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5HL0X

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=73805795c99ff32154c9e37c4334968c037c0f7f

--------------------------------

[ Upstream commit cbd2283a ]

When userspace restarts during boot or upgrades it won't know about the
offload driver's endpoint and connection mappings. iscsid will start by
cleaning up the old session by doing a stop_conn call. Later, if we are
able to create a new connection, we clean up the old endpoint during the
binding stage. The problem is that if we do stop_conn before doing the
ep_disconnect call offload, drivers can still be executing I/O. We then
might free tasks from the under the card/driver.

This moves the ep_disconnect call to before we do the stop_conn call for
this case. It will then work and look like a normal recovery/cleanup
procedure from the driver's point of view.

Link: https://lore.kernel.org/r/20220408001314.5014-3-michael.christie@oracle.comTested-by: NManish Rangankar <mrangankar@marvell.com>
Reviewed-by: NLee Duncan <lduncan@suse.com>
Reviewed-by: NChris Leech <cleech@redhat.com>
Signed-off-by: NMike Christie <michael.christie@oracle.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.112
commit 699bd835c36e095dc80bea21d9a15cd7f7bc8b9f
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5HL0X

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=699bd835c36e095dc80bea21d9a15cd7f7bc8b9f

--------------------------------

[ Upstream commit c34f95e9 ]

This patch moves iscsi_ep_disconnect() so it can be called earlier in the
next patch.

Link: https://lore.kernel.org/r/20220408001314.5014-2-michael.christie@oracle.comTested-by: NManish Rangankar <mrangankar@marvell.com>
Reviewed-by: NLee Duncan <lduncan@suse.com>
Reviewed-by: NChris Leech <cleech@redhat.com>
Signed-off-by: NMike Christie <michael.christie@oracle.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.112
commit 46f37a34a53d4c12fa413b7aec7fe7c3e5cece51
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5HL0X

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=46f37a34a53d4c12fa413b7aec7fe7c3e5cece51

--------------------------------

[ Upstream commit 23d6fefb ]

Commit 0ab71045 ("scsi: iscsi: Perform connection failure entirely in
kernel space") has the following regressions/bugs that this patch fixes:

1. It can return cmds to upper layers like dm-multipath where that can
retry them. After they are successful the fs/app can send new I/O to the
same sectors, but we've left the cmds running in FW or in the net layer.
We need to be calling ep_disconnect if userspace is not up.

This patch only fixes the issue for offload drivers. iscsi_tcp will be
fixed in separate commit because it doesn't have a ep_disconnect call.

2. The drivers that implement ep_disconnect expect that it's called before
conn_stop. Besides crashes, if the cleanup_task callout is called before
ep_disconnect it might free up driver/card resources for session1 then they
could be allocated for session2. But because the driver's ep_disconnect is
not called it has not cleaned up the firmware so the card is still using
the resources for the original cmd.

3. The stop_conn_work_fn can run after userspace has done its recovery and
we are happily using the session. We will then end up with various bugs
depending on what is going on at the time.

We may also run stop_conn_work_fn late after userspace has called stop_conn
and ep_disconnect and is now going to call start/bind conn. If
stop_conn_work_fn runs after bind but before start, we would leave the conn
in a unbound but sort of started state where IO might be allowed even
though the drivers have been set in a state where they no longer expect
I/O.

4. Returning -EAGAIN in iscsi_if_destroy_conn if we haven't yet run the in
kernel stop_conn function is breaking userspace. We should have been doing
this for the caller.

Link: https://lore.kernel.org/r/20210525181821.7617-8-michael.christie@oracle.com
Fixes: 0ab71045 ("scsi: iscsi: Perform connection failure entirely in kernel space")
Reviewed-by: NLee Duncan <lduncan@suse.com>
Signed-off-by: NMike Christie <michael.christie@oracle.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.112
commit 812573896711f3ffb083c374f26f5807efca3b2f
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5HL0X

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=812573896711f3ffb083c374f26f5807efca3b2f

--------------------------------

[ Upstream commit 9e5fe170 ]

Subsequent commits allow the kernel to do ep_disconnect. In that case we
will have to get a proper refcount on the ep so one thread does not delete
it from under another.

Link: https://lore.kernel.org/r/20210525181821.7617-7-michael.christie@oracle.comReviewed-by: NLee Duncan <lduncan@suse.com>
Signed-off-by: NMike Christie <michael.christie@oracle.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.112
commit 22608545b834b855c0a7fd9f675edc884b7d21a3
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5HL0X

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=22608545b834b855c0a7fd9f675edc884b7d21a3

--------------------------------

[ Upstream commit b25b957d ]

Use the system_unbound_wq for async session destruction. We don't need a
dedicated workqueue for async session destruction because:

 1. perf does not seem to be an issue since we only allow 1 active work.

 2. it does not have deps with other system works and we can run them in
    parallel with each other.

Link: https://lore.kernel.org/r/20210525181821.7617-6-michael.christie@oracle.comReviewed-by: NLee Duncan <lduncan@suse.com>
Signed-off-by: NMike Christie <michael.christie@oracle.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.112
commit 4029a1e992fc6a0e29ff56c74a9632317fe76022
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5HL0X

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=4029a1e992fc6a0e29ff56c74a9632317fe76022

--------------------------------

[ Upstream commit 06c203a5 ]

If the system is not up, we can just fail immediately since iscsid is not
going to ever answer our netlink events. We are already setting the
recovery_tmo to 0, but by passing stop_conn STOP_CONN_TERM we never will
block the session and start the recovery timer, because for that flag
userspace will do the unbind and destroy events which would remove the
devices and wake up and kill the eh.

Since the conn is dead and the system is going dowm this just has us use
STOP_CONN_RECOVER with recovery_tmo=0 so we fail immediately. However, if
the user has set the recovery_tmo=-1 we let the system hang like they
requested since they might have used that setting for specific reasons
(one known reason is for buggy cluster software).

Link: https://lore.kernel.org/r/20210525181821.7617-5-michael.christie@oracle.comSigned-off-by: NMike Christie <michael.christie@oracle.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.112
commit 17d14456f6262b87f2ce6e749cc52ebdfa90949d
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5HL0X

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=17d14456f6262b87f2ce6e749cc52ebdfa90949d

--------------------------------

[ Upstream commit 891e2639 ]

During ep_disconnect we have been doing iscsi_suspend_tx/queue to block new
I/O but every driver except cxgbi and iscsi_tcp can still get I/O from
__iscsi_conn_send_pdu() if we haven't called iscsi_conn_failure() before
ep_disconnect. This could happen if we were terminating the session, and
the logout timed out before it was even sent to libiscsi.

Fix the issue by adding a helper which reverses the bind_conn call that
allows new I/O to be queued. Drivers implementing ep_disconnect can use this
to make sure new I/O is not queued to them when handling the disconnect.

Link: https://lore.kernel.org/r/20210525181821.7617-3-michael.christie@oracle.comReviewed-by: NLee Duncan <lduncan@suse.com>
Signed-off-by: NMike Christie <michael.christie@oracle.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.112
commit da9cf24aa739f48cdbf5b2624eacb4a6c81cf9e9
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5HL0X

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=da9cf24aa739f48cdbf5b2624eacb4a6c81cf9e9

--------------------------------

[ Upstream commit bcd8a452 ]

Executing driver on servers with more than 32 CPUs were faced with command
timeouts. This is because we were not geting completions for commands
submitted on IQ32 - IQ63.

Set E64Q bit to enable upper inbound and outbound queues 32 to 63 in the
MPI main configuration table.

Added 500ms delay after successful MPI initialization as mentioned in
controller datasheet.

Link: https://lore.kernel.org/r/20220411064603.668448-3-Ajish.Koshy@microchip.com
Fixes: 05c6c029 ("scsi: pm80xx: Increase number of supported queues")
Reviewed-by: NDamien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: NJack Wang <jinpu.wang@ionos.com>
Signed-off-by: NAjish Koshy <Ajish.Koshy@microchip.com>
Signed-off-by: NViswas G <Viswas.G@microchip.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.112
commit e08d26971237d1af8c3ca456f5729f3f4033890b
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5HL0X

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=e08d26971237d1af8c3ca456f5729f3f4033890b

--------------------------------

[ Upstream commit 294080ea ]

When upper inbound and outbound queues 32-63 are enabled, we see upper
vectors 32-63 in interrupt service routine. We need corresponding registers
to handle masking and unmasking of these upper interrupts.

To achieve this, we use registers MSGU_ODMR_U(0x34) to mask and
MSGU_ODMR_CLR_U(0x3C) to unmask the interrupts. In these registers bit 0-31
represents interrupt vectors 32-63.

Link: https://lore.kernel.org/r/20220411064603.668448-2-Ajish.Koshy@microchip.com
Fixes: 05c6c029 ("scsi: pm80xx: Increase number of supported queues")
Reviewed-by: NJohn Garry <john.garry@huawei.com>
Acked-by: NJack Wang <jinpu.wang@ionos.com>
Signed-off-by: NAjish Koshy <Ajish.Koshy@microchip.com>
Signed-off-by: NViswas G <Viswas.G@microchip.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.112
commit 35b91e49bc80ca944a8679c3b139ddaf2f8eea0f
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5HL0X

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=35b91e49bc80ca944a8679c3b139ddaf2f8eea0f

--------------------------------

[ Upstream commit d22f4f97 ]

dev_name() was called with dev.parent as argument but without to
NULL-check it before.
Solve this by checking the pointer before the call to dev_name().

Fixes: af5f60c7 ("net/smc: allow PCI IDs as ib device names in the pnet table")
Reported-by: syzbot+03e3e228510223dabd34@syzkaller.appspotmail.com
Signed-off-by: NKarsten Graul <kgraul@linux.ibm.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.112
commit 98a7f6c4ada4ca97fcb0d508e097f8597df19d4d
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5HL0X

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=98a7f6c4ada4ca97fcb0d508e097f8597df19d4d

--------------------------------

[ Upstream commit 47b7de6b ]

The member 'msm_dsi->connector' isn't assigned until
msm_dsi_manager_connector_init() returns (see msm_dsi_modeset_init() and
how it assigns the return value). Therefore this pointer is going to be
NULL here. Let's use 'connector' which is what was intended.

Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Fixes: 6d5e7840 ("drm/msm/dsi: Move dsi panel init into modeset init path")
Signed-off-by: NStephen Boyd <swboyd@chromium.org>
Reviewed-by: NDmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/478693/
Link: https://lore.kernel.org/r/20220318000731.2823718-1-swboyd@chromium.orgSigned-off-by: NDmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: NRob Clark <robdclark@chromium.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.112
commit 5f78ad93837c61ed62a6f7b10a960c0c9218382c
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5HL0X

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=5f78ad93837c61ed62a6f7b10a960c0c9218382c

--------------------------------

[ Upstream commit 537fef80 ]

The fourth param is size, rather than range_end.

Note that we could increase the address space size if we had a way to
prevent buffers from spanning a 4G split, mostly just to avoid fw bugs
with 64b math.

Fixes: 84c31ee1 ("drm/msm/a6xx: Add support for per-instance pagetables")
Signed-off-by: NRob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220407202836.1211268-1-robdclark@gmail.comSigned-off-by: NRob Clark <robdclark@chromium.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.112
commit 5513f9a0b0684383c1bc120ea37b35ae944a709a
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5HL0X

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=5513f9a0b0684383c1bc120ea37b35ae944a709a

--------------------------------

[ Upstream commit a5199b56 ]

Synchronize additions to nontrans_list of transmitting BSS with
bss_lock to avoid races. Also when cfg80211_add_nontrans_list() fails
__cfg80211_unlink_bss() needs bss_lock to be held (has lockdep assert
on bss_lock). So protect the whole block with bss_lock to avoid
races and warnings. Found during code review.

Fixes: 0b8fb823 ("cfg80211: Parsing of Multiple BSSID information in scanning")
Signed-off-by: NRameshkumar Sundaram <quic_ramess@quicinc.com>
Link: https://lore.kernel.org/r/1649668071-9370-1-git-send-email-quic_ramess@quicinc.comSigned-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.112
commit a44938950e5e12dd676ec2b38701b6d3c4e1a281
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5HL0X

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=a44938950e5e12dd676ec2b38701b6d3c4e1a281

--------------------------------

[ Upstream commit e8a64bba ]

A user may set the SO_TXTIME socket option to ensure a packet is send
at a given time. The taprio scheduler has to confirm, that it is allowed
to send a packet at that given time, by a check against the packet time
schedule. The scheduler drop the packet, if the gates are closed at the
given send time.

The check, if SO_TXTIME is set, may fail since sk_flags are part of an
union and the union is used otherwise. This happen, if a socket is not
a full socket, like a request socket for example.

Add a check to verify, if the union is used for sk_flags.

Fixes: 4cfd5779 ("taprio: Add support for txtime-assist mode")
Signed-off-by: NBenedikt Spranger <b.spranger@linutronix.de>
Reviewed-by: NKurt Kanzenbach <kurt@linutronix.de>
Acked-by: NVinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.112
commit 08d5e3e954537931c8da7428034808d202e98299
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5HL0X

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=08d5e3e954537931c8da7428034808d202e98299

--------------------------------

[ Upstream commit a6aaa003 ]

When using a fixed-link, the altr_tse_pcs driver crashes
due to null-pointer dereference as no phy_device is provided to
tse_pcs_fix_mac_speed function. Fix this by adding a check for
phy_dev before calling the tse_pcs_fix_mac_speed() function.

Also clean up the tse_pcs_fix_mac_speed function a bit. There is
no need to check for splitter_base and sgmii_adapter_base
because the driver will fail if these 2 variables are not
derived from the device tree.

Fixes: fb3bbdb8 ("net: ethernet: Add TSE PCS support to dwmac-socfpga")
Signed-off-by: NDinh Nguyen <dinguyen@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.112
commit 2ad9d890d850db6c55ec2d9b5b3cbb7ca5178f3f
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5HL0X

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=2ad9d890d850db6c55ec2d9b5b3cbb7ca5178f3f

--------------------------------

[ Upstream commit e6934e40 ]

The DSA master might not have been probed yet in which case the probe of
the felix switch fails with -EPROBE_DEFER:
[    4.435305] mscc_felix 0000:00:00.5: Failed to register DSA switch: -517

It is not an error. Use dev_err_probe() to demote this particular error
to a debug message.

Fixes: 56051948 ("net: dsa: ocelot: add driver for Felix switch family")
Signed-off-by: NMichael Walle <michael@walle.cc>
Reviewed-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220408101521.281886-1-michael@walle.ccSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.112
commit f2cc341fcc42a2507d9c36e94317f5e0834fc5fd
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5HL0X

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=f2cc341fcc42a2507d9c36e94317f5e0834fc5fd

--------------------------------

[ Upstream commit e65812fd ]

Currently, when inserting a new filter that needs to sit at the head
of chain 0, it will first update the heads pointer on all devices using
the (shared) block, and only then complete the initialization of the new
element so that it has a "next" element.

This can lead to a situation that the chain 0 head is propagated to
another CPU before the "next" initialization is done. When this race
condition is triggered, packets being matched on that CPU will simply
miss all other filters, and will flow through the stack as if there were
no other filters installed. If the system is using OVS + TC, such
packets will get handled by vswitchd via upcall, which results in much
higher latency and reordering. For other applications it may result in
packet drops.

This is reproducible with a tc only setup, but it varies from system to
system. It could be reproduced with a shared block amongst 10 veth
tunnels, and an ingress filter mirroring packets to another veth.
That's because using the last added veth tunnel to the shared block to
do the actual traffic, it makes the race window bigger and easier to
trigger.

The fix is rather simple, to just initialize the next pointer of the new
filter instance (tp) before propagating the head change.

The fixes tag is pointing to the original code though this issue should
only be observed when using it unlocked.

Fixes: 2190d1d0 ("net: sched: introduce helpers to work with filter chains")
Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NVlad Buslov <vladbu@nvidia.com>
Reviewed-by: NDavide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/b97d5f4eaffeeb9d058155bcab63347527261abf.1649341369.git.marcelo.leitner@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.112
commit 7a7cf84148416d93d5904eb9a7cf5499ab852b84
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5HL0X

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=7a7cf84148416d93d5904eb9a7cf5499ab852b84

--------------------------------

[ Upstream commit d452088c ]

Add mutex_destroy() call in driver initialization error flow.

Fixes: 6882b0ae ("mlxsw: Introduce support for I2C bus")
Signed-off-by: NVadim Pasternak <vadimp@nvidia.com>
Signed-off-by: NIdo Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20220407070703.2421076-1-idosch@nvidia.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.112
commit 43e58e119a2b913d3b7576455b0b1f56b569ca0b
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5HL0X

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=43e58e119a2b913d3b7576455b0b1f56b569ca0b

--------------------------------

[ Upstream commit 1bf34366 ]

Alphabetically sort header inclusion
Signed-off-by: NCalvin Johnson <calvin.johnson@oss.nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.112
commit 9709c8b5cdc88b1adb77acdbfd6e8a3f942d9af5
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5HL0X

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=9709c8b5cdc88b1adb77acdbfd6e8a3f942d9af5

--------------------------------

[ Upstream commit 213d266e ]

When compiling with -Wformat, clang emits the following warning:

  gpiolib-acpi.c:393:4: warning: format specifies type 'unsigned char' but the argument has type 'int' [-Wformat]
                        pin);
                        ^~~

So warning that '%hhX' is paired with an 'int' is all just completely
mindless and wrong. Sadly, I can see a different bogus warning reason
why people would want to use '%02hhX'.

Again, the *sane* thing from a human perspective is to use '%02X. But
if the compiler doesn't do any range analysis at all, it could decide
that "Oh, that print format could need up to 8 bytes of space in the
result". Using '%02hhX' would cut that down to two.

And since we use

        char ev_name[5];

and currently use "_%c%02hhX" as the format string, even a compiler
that doesn't notice that "pin <= 255" test that guards this all will
go "OK, that's at most 4 bytes and the final NUL termination, so it's
fine".

While a compiler - like gcc - that only sees that the original source
of the 'pin' value is a 'unsigned short' array, and then doesn't take
the "pin <= 255" into account, will warn like this:

  gpiolib-acpi.c: In function 'acpi_gpiochip_request_interrupt':
  gpiolib-acpi.c:206:24: warning: '%02X' directive writing between 2 and 4 bytes into a region of size 3 [-Wformat-overflow=]
       sprintf(ev_name, "_%c%02X",
                            ^~~~
  gpiolib-acpi.c:206:20: note: directive argument in the range [0, 65535]

because gcc isn't being very good at that argument range analysis either.

In other words, the original use of 'hhx' was bogus to begin with, and
due to *another* compiler warning being bad, and we had that bad code
being written back in 2016 to work around _that_ compiler warning
(commit e40a3ae1: "gpio: acpi: work around false-positive
-Wstring-overflow warning").

Sadly, two different bad compiler warnings together does not make for
one good one.

It just makes for even more pain.

End result: I think the simplest and cleanest option is simply the
proposed change which undoes that '%hhX' change for gcc, and replaces
it with just using a slightly bigger stack allocation. It's not like
a 5-byte allocation is in any way likely to have saved any actual stack,
since all the other variables in that function are 'int' or bigger.

False-positive compiler warnings really do make people write worse
code, and that's a problem. But on a scale of bad code, I feel that
extending the buffer trivially is better than adding a pointless cast
that literally makes no sense.

At least in this case the end result isn't unreadable or buggy. We've
had several cases of bad compiler warnings that caused changes that
were actually horrendously wrong.

Fixes: e40a3ae1 ("gpio: acpi: work around false-positive -Wstring-overflow warning")
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.112
commit d67c900f1947d64ba8a64f693504bcaab8d9000c
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5HL0X

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=d67c900f1947d64ba8a64f693504bcaab8d9000c

--------------------------------

[ Upstream commit 726e2c59 ]

After feeding a decapsulated packet to a veth device with act_mirred,
skb_headlen() may be 0. But veth_xmit() calls __dev_forward_skb(),
which expects at least ETH_HLEN byte of linear data (as
__dev_forward_skb2() calls eth_type_trans(), which pulls ETH_HLEN bytes
unconditionally).

Use pskb_may_pull() to ensure veth_xmit() respects this constraint.

kernel BUG at include/linux/skbuff.h:2328!
RIP: 0010:eth_type_trans+0xcf/0x140
Call Trace:
 <IRQ>
 __dev_forward_skb2+0xe3/0x160
 veth_xmit+0x6e/0x250 [veth]
 dev_hard_start_xmit+0xc7/0x200
 __dev_queue_xmit+0x47f/0x520
 ? skb_ensure_writable+0x85/0xa0
 ? skb_mpls_pop+0x98/0x1c0
 tcf_mirred_act+0x442/0x47e [act_mirred]
 tcf_action_exec+0x86/0x140
 fl_classify+0x1d8/0x1e0 [cls_flower]
 ? dma_pte_clear_level+0x129/0x1a0
 ? dma_pte_clear_level+0x129/0x1a0
 ? prb_fill_curr_block+0x2f/0xc0
 ? skb_copy_bits+0x11a/0x220
 __tcf_classify+0x58/0x110
 tcf_classify_ingress+0x6b/0x140
 __netif_receive_skb_core.constprop.0+0x47d/0xfd0
 ? __iommu_dma_unmap_swiotlb+0x44/0x90
 __netif_receive_skb_one_core+0x3d/0xa0
 netif_receive_skb+0x116/0x170
 be_process_rx+0x22f/0x330 [be2net]
 be_poll+0x13c/0x370 [be2net]
 __napi_poll+0x2a/0x170
 net_rx_action+0x22f/0x2f0
 __do_softirq+0xca/0x2a8
 __irq_exit_rcu+0xc1/0xe0
 common_interrupt+0x83/0xa0

Fixes: e314dbdc ("[NET]: Virtual ethernet device driver.")
Signed-off-by: NGuillaume Nault <gnault@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-v5.10.112
commit 85ee17ca21cf92989e8c923e3ea4514c291e9d38
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5HL0X

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=85ee17ca21cf92989e8c923e3ea4514c291e9d38

--------------------------------

[ Upstream commit 4d500445 ]

Fix a NULL deref crash that occurs when an svc_rqst is deferred
while the sunrpc tracing subsystem is enabled. svc_revisit() sets
dr->xprt to NULL, so it can't be relied upon in the tracepoint to
provide the remote's address.

Unfortunately we can't revert the "svc_deferred_class" hunk in
commit ece200dd ("sunrpc: Save remote presentation address in
svc_xprt for trace events") because there is now a specific check
of event format specifiers for unsafe dereferences. The warning
that check emits is:

  event svc_defer_recv has unsafe dereference of argument 1

A "%pISpc" format specifier with a "struct sockaddr *" is indeed
flagged by this check.

Instead, take the brute-force approach used by the svcrdma_qp_error
tracepoint. Convert the dr::addr field into a presentation address
in the TP_fast_assign() arm of the trace event, and store that as
a string. This fix can be backported to -stable kernels.

In the meantime, commit c6ced229 ("tracing: Update print fmt
check to handle new __get_sockaddr() macro") is now in v5.18, so
this wonky fix can be replaced with __sockaddr() and friends
properly during the v5.19 merge window.

Fixes: ece200dd ("sunrpc: Save remote presentation address in svc_xprt for trace events")
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>