- 18 7月, 2012 4 次提交
-
-
由 Benoît Thébaudeau 提交于
Some mxc processors have an edge_sel feature, which allows the IRQ to be triggered by any edge. This patch makes use of this feature if available, which skips mxc_flip_edge(). Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Linus Walleij <linus.walleij@stericsson.com> Acked-by: NSascha Hauer <kernel@pengutronix.de> Cc: <linux-arm-kernel@lists.infradead.org> Signed-off-by: NBenoît Thébaudeau <benoit.thebaudeau@advansee.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Alexandre Courbot 提交于
Make of_get_named_gpio_flags propagate any error it receives from of_parse_phandle_with_args instead of inconditionally returning -EINVAL. Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Olof Johansson 提交于
This adds a flags field to the gpio specifier for Samsung. I didn't want to add yet another field in the already quite long specifier, so I decided to compress it together with the Pull Up/Down settings instead. This is needed to, for example, have a gpio-keys input that is active low. Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Mark Brown 提交于
The Arizona class devices provide some GPIOs for use in the system. This driver provides support for these via gpiolib. Currently interrupts are not supported, normally the GPIOs are outputs only. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> [Fold in WM5110 support patch] Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
- 12 7月, 2012 7 次提交
-
-
由 Roland Stigge 提交于
This patch helps mapping with gpio_to_irq for the GPIOs that are irq enabled. Signed-off-by: NRoland Stigge <stigge@antcom.de> Tested-by: NAlexandre Pereira da Silva <aletes.xgr@gmail.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Kuninori Morimoto 提交于
This patch adds 8/16 bit write/read functions, and shared gpio input/output/set/get functions. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Roland Stigge 提交于
Since LPC32xx is now switched over to devicetree based GPIO, the unused lpc32xx_gpio_init() can be removed. Further, the driver title changed since it referred to the wrong file. Signed-off-by: NRoland Stigge <stigge@antcom.de> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Mark Brown 提交于
This has no practical impact at present since we don't support device tree so any user must have set an irq_base but this will in future allow a transition to device tree with minimal invasiveness. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Dmitry Eremin-Solenikov 提交于
Add a driver to use GPIO pins available on several AMD south bridges (currently only AMD 8111 is supported). Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
- 05 7月, 2012 1 次提交
-
-
git://git.secretlab.ca/git/linux-2.6由 Linus Walleij 提交于
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
- 01 7月, 2012 9 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Olof Johansson: "Another week, another batch of fixes. All are small, contained, targeted fixes for explicit problems -- mostly build and boot failures across i.MX, OMAP, Renesas/Shmobile and Samsung." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: imx6q: fix suspend regression caused by common clk migration ARM: OMAP4470: Fix OMAP4470 boot failure ARM: EXYNOS: Fix EXYNOS_DEV_DMA Kconfig entry ARM: OMAP2+: nand: fix build error when CONFIG_MTD_ONENAND_OMAP2=n ARM: shmobile: r8a7779: Route all interrupts to ARM ARM: shmobile: kzm9d: use late init machine hook ARM: shmobile: kzm9g: use late init machine hook ARM: mach-shmobile: armadillo800eva: Use late init machine hook ARM: SAMSUNG: Fix for S3C2412 EBI memory mapping ARM: mach-shmobile: add missing GPIO IRQ configuration on mackerel ARM: mach-shmobile: Fix build when SMP is enabled and EMEV2 is not enabled ARM: shmobile: sh7372: bugfix: chclr_offset base ARM: shmobile: sh73a0: bugfix: SY-DMAC number ARM: SAMSUNG: Should check for IS_ERR(clk) instead of NULL
-
由 Randy Dunlap 提交于
Fix kernel-doc warnings in printk.c: use correct parameter name. Warning(kernel/printk.c:2429): No description found for parameter 'buf' Warning(kernel/printk.c:2429): Excess function parameter 'line' description in 'kmsg_dump_get_buffer' Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Fix kernel-doc warning. This struct member was removed in commit 87568264 ("irq: Remove irq_chip->release()") so remove its associated kernel-doc entry also. Warning(include/linux/irq.h:338): Excess struct/union/enum/typedef member 'release' description in 'irq_chip' Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Cc: Richard Weinberger <richard@nod.at> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Olof Johansson 提交于
Merge branch 'v3.5-samsung-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes * 'v3.5-samsung-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: Fix EXYNOS_DEV_DMA Kconfig entry ARM: SAMSUNG: Fix for S3C2412 EBI memory mapping ARM: SAMSUNG: Should check for IS_ERR(clk) instead of NULL
-
由 Shawn Guo 提交于
When moving to common clk framework, the imx6q clks rom and mmdc_ch1_axi get different on/off states than old clk driver, which breaks suspend function. There might be a better way to manage these clocks, but let's takes the old clk driver approach to fix the regression first. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Olof Johansson 提交于
Merge tag 'omap-fixes-for-v3.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: "Here's one more regression fix that I missed earlier, and a trivial fix to get omap4470 booting." * tag 'omap-fixes-for-v3.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP4470: Fix OMAP4470 boot failure ARM: OMAP2+: nand: fix build error when CONFIG_MTD_ONENAND_OMAP2=n
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux由 Linus Torvalds 提交于
Pull ACPI & Power Management patches from Len Brown. * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: acpi_pad: fix power_saving thread deadlock ACPI video: Still use ACPI backlight control if _DOS doesn't exist ACPI, APEI, Avoid too much error reporting in runtime ACPI: Add a quirk for "AMILO PRO V2030" to ignore the timer overriding ACPI: Remove one board specific WARN when ignoring timer overriding ACPI: Make acpi_skip_timer_override cover all source_irq==0 cases ACPI, x86: fix Dell M6600 ACPI reboot regression via DMI ACPI sysfs.c strlen fix
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core由 Linus Torvalds 提交于
Pull driver Core fixes from Greg Kroah-Hartman: "Here is a number of printk() fixes, specifically a few reported by the crazy blog program that ships in SUSE releases (that's "boot log" and not "web log", it predates the general "blog" terminology by many years), and the restoration of the continuation line functionality reported by Stephen and others. Yes, the changes seem a bit big this late in the cycle, but I've been beating on them for a while now, and Stephen has even optimized it a bit, so all looks good to me. The other change in here is a Documentation update for the stable kernel rules describing how some distro patches should be backported, to hopefully drive a bit more response from the distros to the stable kernel releases. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'driver-core-3.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: printk: Optimize if statement logic where newline exists printk: flush continuation lines immediately to console syslog: fill buffer with more than a single message for SYSLOG_ACTION_READ Revert "printk: return -EINVAL if the message len is bigger than the buf size" printk: fix regression in SYSLOG_ACTION_CLEAR stable: Allow merging of backports for serious user-visible performance issues
-
- 30 6月, 2012 9 次提交
-
-
由 Len Brown 提交于
Merge branches 'acpi_pad-bugzilla-42981', 'apei-bugzilla-43282', 'video-bugzilla-43168', 'bugzilla-40002' and 'bugfix-misc' into release bug fixes
-
由 Stuart Hayes 提交于
The acpi_pad driver can get stuck in destroy_power_saving_task() waiting for kthread_stop() to stop a power_saving thread. The problem is that the isolated_cpus_lock mutex is owned when destroy_power_saving_task() calls kthread_stop(), which waits for a power_saving thread to end, and the power_saving thread tries to acquire the isolated_cpus_lock when it calls round_robin_cpu(). This patch fixes the issue by making round_robin_cpu() use its own mutex. https://bugzilla.kernel.org/show_bug.cgi?id=42981 Cc: stable@vger.kernel.org Signed-off-by: NStuart Hayes <Stuart_Hayes@Dell.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Zhang Rui 提交于
This fixes a regression in 3.4-rc1 caused by commit ea9f8856 (ACPI video: Harden video bus adding.) Some platforms don't have _DOS control method, but the ACPI backlight still works. We should not invoke _DOS for these platforms. https://bugzilla.kernel.org/show_bug.cgi?id=43168 Cc: Igor Murzov <intergalactic.anonymous@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: NZhang Rui <rui.zhang@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull power management fixes from Rafael J. Wysocki: * Fix for a bug in async suspend error code path causing parents to wait forever for their children in case of a suspend error from Mandeep Singh Baines (-stable metarial). * Fix for a suspend regression related to earlier changes in the ACPI cpuidle driver from Deepthi Dharwar. * tag 'pm-for-3.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / ACPI: Fix suspend/resume regression caused by cpuidle cleanup. PM / Sleep: Prevent waiting forever on asynchronous suspend after abort
-
由 Steven Rostedt 提交于
In reviewing Kay's fix up patch: "printk: Have printk() never buffer its data", I found two if statements that could be combined and optimized. Put together the two 'cont.len && cont.owner == current' if statements into a single one, and check if we need to call cont_add(). This also removes the unneeded double cont_flush() calls. Link: http://lkml.kernel.org/r/1340869133.876.10.camel@mopSigned-off-by: NSteven Rostedt <rostedt@goodmis.org> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
Pull powerpc fixes from Benjamin Herrenschmidt: "Here are a few powerpc fixes. Arguably some of this should have come to you earlier but I'm only just catching up after my medical leave. Mostly these fixes regressions, a couple are long standing bugs." * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/pseries: Fix software invalidate TCE powerpc: check_and_cede_processor() never cedes powerpc/ftrace: Do not trace restore_interrupts() powerpc: Fix Section mismatch warnings in prom_init.c ppc64: fix missing to check all bits of _TIF_USER_WORK_MASK in preempt powerpc: Fix uninitialised error in numa.c powerpc: Fix BPF_JIT code to link with multiple TOCs
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Ingo Molnar. * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, cpufeature: Remove stray %s, add -w to mkcapflags.pl x86, cpufeature: Catch duplicate CPU feature strings x86, cpufeature: Rename X86_FEATURE_DTS to X86_FEATURE_DTHERM x86: Fix kernel-doc warnings x86, compat: Use test_thread_flag(TIF_IA32) in compat signal delivery
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull oprofile fixlet from Ingo Molnar. * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: oprofile: perf: use NR_CPUS instead or nr_cpumask_bits for static array
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull RCU fix from Ingo Molnar. Fixes a bug introduced in this merge window by commit b1420f1c ("Make rcu_barrier() less disruptive") * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rcu: Stop rcu_do_batch() from multiplexing the "count" variable
-
- 29 6月, 2012 10 次提交
-
-
由 Kay Sievers 提交于
Continuation lines are buffered internally, intended to merge the chunked printk()s into a single record, and to isolate potentially racy continuation users from usual terminated line users. This though, has the effect that partial lines are not printed to the console in the moment they are emitted. In case the kernel crashes in the meantime, the potentially interesting printed information would never reach the consoles. Here we share the continuation buffer with the console copy logic, and partial lines are always immediately flushed to the available consoles. They are still buffered internally to improve the readability and integrity of the messages and minimize the amount of needed record headers to store. Signed-off-by: NKay Sievers <kay@vrfy.org> Tested-by: NSteven Rostedt <rostedt@goodmis.org> Acked-by: NSteven Rostedt <rostedt@goodmis.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Michael Neuling 提交于
The following added support for powernv but broke pseries/BML: 1f1616e8 powerpc/powernv: Add TCE SW invalidation support TCE_PCI_SW_INVAL was split into FREE and CREATE flags but the tests in the pseries code were not updated to reflect this. Signed-off-by: NMichael Neuling <mikey@neuling.org> cc: stable@kernel.org [v3.3+] Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
Commit f948501b ("Make hard_irq_disable() actually hard-disable interrupts") caused check_and_cede_processor to stop working. ->irq_happened will never be zero right after a hard_irq_disable so the compiler removes the call to cede_processor completely. The bug was introduced back in the lazy interrupt handling rework of 3.4 but was hidden until recently because hard_irq_disable did nothing. This issue will eventually appear in 3.4 stable since the hard_irq_disable fix is marked stable, so mark this one for stable too. Signed-off-by: NAnton Blanchard <anton@samba.org> Cc: stable@vger.kernel.org Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Steven Rostedt 提交于
As I was adding code that affects all archs, I started testing function tracer against PPC64 and found that it currently locks up with 3.4 kernel. I figured it was due to tracing a function that shouldn't be, so I went through the following process to bisect to find the culprit: cat /debug/tracing/available_filter_functions > t num=`wc -l t` sed -ne "1,${num}p" t > t1 let num=num+1 sed -ne "${num},$p" t > t2 cat t1 > /debug/tracing/set_ftrace_filter echo function /debug/tracing/current_tracer <failed? bisect t1, if not bisect t2> It finally came down to this function: restore_interrupts() I'm not sure why this locks up the system. It just seems to prevent scheduling from occurring. Interrupts seem to still work, as I can ping the box. But all user processes freeze. When restore_interrupts() is not traced, function tracing works fine. Cc: stable@kernel.org Signed-off-by: NSteven Rostedt <rostedt@goodmis.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Li Zhong 提交于
This patches tries to fix a couple of Section mismatch warnings like following one: WARNING: arch/powerpc/kernel/built-in.o(.text+0x2923c): Section mismatch in reference from the function .prom_query_opal() to the function .init.text:.call_prom() The function .prom_query_opal() references the function __init .call_prom(). This is often because .prom_query_opal lacks a __init annotation or the annotation of .call_prom is wrong. Signed-off-by: NLi Zhong <zhong@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Tiejun Chen 提交于
In entry_64.S version of ret_from_except_lite, you'll notice that in the !preempt case, after we've checked MSR_PR we test for any TIF flag in _TIF_USER_WORK_MASK to decide whether to go to do_work or not. However, in the preempt case, we do a convoluted trick to test SIGPENDING only if PR was set and always test NEED_RESCHED ... but we forget to test any other bit of _TIF_USER_WORK_MASK !!! So that means that with preempt, we completely fail to test for things like single step, syscall tracing, etc... This should be fixed as the following path: - Test PR. If not set, go to resume_kernel, else continue. - If go resume_kernel, to do that original do_work. - If else, then always test for _TIF_USER_WORK_MASK to decide to do that original user_work, else restore directly. Signed-off-by: NTiejun Chen <tiejun.chen@windriver.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Neuling 提交于
chroma_defconfig currently gives me this with gcc 4.6: arch/powerpc/mm/numa.c:638:13: error: 'dm' may be used uninitialized in this function [-Werror=uninitialized] It's a bogus warning/error since of_get_drconf_memory() only writes it anyway. Signed-off-by: NMichael Neuling <mikey@neuling.org> cc: <stable@kernel.org> [v3.3+] Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
If the kernel is big enough (eg. allyesconfig), the linker may need to switch TOCs when calling from the BPF JIT code out to the external helpers (skb_copy_bits() & bpf_internal_load_pointer_neg_helper()). In order to do that we need to leave space after the bl for the linker to insert a reload of our TOC pointer. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Acked-by: NMatt Evans <matt@ozlabs.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging由 Linus Torvalds 提交于
Pull hwmon changes from Guenter Roeck: "Just e-mail address updates" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: Update my e-mail address hwmon: (applesmc) correct email address for Jesper Juhl
-
git://www.linux-watchdog.org/linux-watchdog由 Linus Torvalds 提交于
Pull watchdog fixes from Wim Van Sebroeck: "This fixes: - the WDIOC_GETSTATUS return value - the unregister of all NMI events on exit - the loading of the iTCO_wdt driver after the conversion to the lpc_ich mfd model." * git://www.linux-watchdog.org/linux-watchdog: watchdog: core: fix WDIOC_GETSTATUS return value watchdog: hpwdt: Unregister NMI events on exit. watchdog: iTCO_wdt: add platform driver module alias
-