PEBS can capture machine state regs at retiremnt of the sampled
instructions. When precise sampling is enabled on an event, PEBS
is used, so substitute the interrupted state with the PEBS state.
Note that not all registers are captured by PEBS. Those missing
are replaced by the interrupt state counter-parts.
Signed-off-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1411559322-16548-3-git-send-email-eranian@google.com
Cc: cebbert.lkml@gmail.com
Cc: jolsa@redhat.com
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Enable capture of interrupted machine state for each sample.

Registers to sample are passed per event in the sample_regs_intr bitmask.

To sample interrupt machine state, the PERF_SAMPLE_INTR_REGS must be passed in
sample_type.

The list of available registers is arch dependent and provided by asm/perf_regs.h

Registers are laid out as u64 in the order of the bit order of sample_intr_regs.

This patch also adds a new ABI version PERF_ATTR_SIZE_VER4 because we extend
the perf_event_attr struct with a new u64 field.
Reviewed-by: NJiri Olsa <jolsa@redhat.com>
Signed-off-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: cebbert.lkml@gmail.com
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-api@vger.kernel.org
Link: http://lkml.kernel.org/r/1411559322-16548-2-git-send-email-eranian@google.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Disallow setting inv/cmask/etc. flags for all PEBS events
on these CPUs, except for the UOPS_RETIRED.* events on Nehalem/Westmere,
which are needed for cycles:p. This avoids an undefined situation
strongly discouraged by the Intle SDM. The PLD_* events were already
covered. This follows the earlier changes for Sandy Bridge and alter.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Link: http://lkml.kernel.org/r/1411569288-5627-3-git-send-email-andi@firstfloor.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

My earlier commit:

  86a04461 ("perf/x86: Revamp PEBS event selection")

made nearly all PEBS on Sandy/IvyBridge/Haswell to reject non zero flags.

However this wasn't done for the INST_RETIRED.PREC_DIST event
because no suitable macro existed. Now that we have
INTEL_FLAGS_UEVENT_CONSTRAINT enforce zero flags for
INST_RETIRED.PREC_DIST too.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Link: http://lkml.kernel.org/r/1411569288-5627-2-git-send-email-andi@firstfloor.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Add a FLAGS_UEVENT_CONSTRAINT macro that allows us to
match on event+umask, and in additional all flags.

This is needed to ensure the INV and CMASK fields
are zero for specific events, as this can cause undefined
behavior.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com>
Cc: Mark Davies <junk@eslaf.co.uk>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1411569288-5627-1-git-send-email-andi@firstfloor.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Add scaling to MB/s to the memory controller read/write
events for Sandy/IvyBridge/Haswell-EP similar to how the client
does. This makes the events easier to use from the
standard perf tool.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Link: http://lkml.kernel.org/r/1415062828-19759-2-git-send-email-andi@firstfloor.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Signed-off-by: NIngo Molnar <mingo@kernel.org>

There were several reports that on some systems writing the SBOX0 PMU
initialization MSR would #GP at boot. This did not happen on all
systems -- my two test systems booted fine.

Writing the three initialization bits bit-by-bit seems to avoid the
problem. So add a special callback to do just that.

This replaces an earlier patch that disabled the SBOX.
Reported-by: NAlexei Starovoitov <alexei.starovoitov@gmail.com>
Reported-and-Tested-by: NPatrick Lu <patrick.lu@intel.com>
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Link: http://lkml.kernel.org/r/1415062828-19759-4-git-send-email-andi@firstfloor.org
[ Fixed a whitespace error and added attribution tags that were left out inexplicably. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>

The counter register offsets for the IRP box PMU for Haswell-EP
were incorrect. The offsets actually changed over IvyBridge EP.

Fix them to the correct values. For this we need to fork the read
function from the IVB and use an own counter array.

Tested-by: patrick.lu@intel.com
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Link: http://lkml.kernel.org/r/1415062828-19759-3-git-send-email-andi@firstfloor.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

When a CPU hotplugged out, we call perf_remove_from_context() (via
perf_event_exit_cpu()) to rip each CPU-bound event out of its PMU's cpu
context, but leave siblings grouped together. Freeing of these events is
left to the mercy of the usual refcounting.

When a CPU-bound event's refcount drops to zero we cross-call to
__perf_remove_from_context() to clean it up, detaching grouped siblings.

This works when the relevant CPU is online, but will fail if the CPU is
currently offline, and we won't detach the event from its siblings
before freeing the event, leaving the sibling list corrupt. If the
sibling list is later walked (e.g. because the CPU cam online again
before a remaining sibling's refcount drops to zero), we will walk the
now corrupted siblings list, potentially dereferencing garbage values.

Given that the events should never be scheduled again (as we removed
them from their context), we can simply detatch siblings when the CPU
goes down in the first place. If the CPU comes back online, the
redundant call to __perf_remove_from_context() is safe.
Reported-by: NDrew Richardson <drew.richardson@arm.com>
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: vincent.weaver@maine.edu
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1415203904-25308-2-git-send-email-mark.rutland@arm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

New Fam15h models carry extra feature bits and extend
the MSR register space for IBS ops. Adding them here.

While at it, add functionality to read IbsBrTarget and
OpData4 depending on their availability if user wants a
PERF_SAMPLE_RAW.
Signed-off-by: NAravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Acked-by: NBorislav Petkov <bp@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <paulus@samba.org>
Cc: <acme@kernel.org>
Link: http://lkml.kernel.org/r/1415651066-13523-1-git-send-email-Aravind.Gopalakrishnan@amd.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

Infrastructure changes:

 - Add gzip decompression support for kernel modules (Namhyung Kim)

 - More prep patches for Intel PT, including a a thread stack and
   more stuff made available via the database export mechanism (Adrian Hunter)

 - Optimize checking that tracepoint events are defined in perf script perl/python (Jiri Olsa)

 - Do not free pevent when deleting tracepoint evsel (Jiri Olsa)

 - Fix build-id matching for vmlinux (Namhyung Kim)
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

The libtraceevent library's main handle 'struct pevent' holds pointers
of every event that was added to it via functions:

  pevent_parse_format
  pevent_parse_event

We can't release struct event_format (call pevent_free_format)
separately, because that breaks that pointers array mentioned above and
another add_event call could end up with segfault.

All added events are released within the handle cleanup in pevent_free.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1415098538-1512-1-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We don't need to maintain cache of 'struct event_format' objects.
Currently the 'struct perf_evsel' holds this reference already.

Adding events_defined bitmap to keep track of defined events, which is
much cheaper than array of pointers.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Acked-by: NNamhyung Kim <namhyung@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1414363445-22370-3-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We don't need to maintain cache of 'struct event_format' objects.
Currently the 'struct perf_evsel' holds this reference already.

Adding events_defined bitmap to keep track of defined events, which is
much cheaper than array of pointers.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Acked-by: NNamhyung Kim <namhyung@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1414363445-22370-2-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Set a bit and return its old value. Stolen from kernel sources, will be
used in next patches.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Acked-by: NNamhyung Kim <namhyung@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1414363445-22370-1-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The previous patch changed kernel dso name from '[kernel.kallsyms]' to
vmlinux.  However it might add confusion to old users accustomed to the
old name.  So change the short name to '[kernel.vmlinux]' to reduce such
confusion.

Before:
  # Overhead  Command         Shared Object            Symbol
  # ........  ..............  .......................  ...............................
  #
       9.83%  swapper         vmlinux                  [k] intel_idle
       4.10%  awk             libc-2.20.so             [.] __strcmp_sse2
       1.86%  sed             libc-2.20.so             [.] __strcmp_sse2
       1.78%  netctl-auto     libc-2.20.so             [.] __strcmp_sse2
       1.23%  netctl-auto     libc-2.20.so             [.] __mbrtowc
       1.21%  firefox         libxul.so                [.] 0x00000000024b62bd
       1.20%  swapper         vmlinux                  [k] cpuidle_enter_state
       1.03%  sleep           vmlinux                  [k] copy_user_generic_unrolled

After:
  # Overhead  Command         Shared Object            Symbol
  # ........  ..............  .......................  ...............................
  #
       9.83%  swapper         [kernel.vmlinux]         [k] intel_idle
       4.10%  awk             libc-2.20.so             [.] __strcmp_sse2
       1.86%  sed             libc-2.20.so             [.] __strcmp_sse2
       1.78%  netctl-auto     libc-2.20.so             [.] __strcmp_sse2
       1.23%  netctl-auto     libc-2.20.so             [.] __mbrtowc
       1.21%  firefox         libxul.so                [.] 0x00000000024b62bd
       1.20%  swapper         [kernel.vmlinux]         [k] cpuidle_enter_state
       1.03%  sleep           [kernel.vmlinux]         [k] copy_user_generic_unrolled
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1415063674-17206-9-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

There's a problem on finding correct kernel symbols when perf report
runs on a different kernel.  Although a part of the problem was solved
by the prior commit 0a7e6d1b ("perf tools: Check recorded kernel
version when finding vmlinux"), there's a remaining problem still.

When perf records samples, it synthesizes the kernel map using
machine__mmap_name() and ref_reloc_sym like "[kernel.kallsyms]_text".
You can easily see it using 'perf report -D' command.

After finishing record, it goes through the recorded events to find
maps/dsos actually used.  And then record build-id info of them.

During this process, it needs to load symbols in a dso and it'd call
dso__load_vmlinux_path() since the default value of the symbol_conf.
try_vmlinux_path is true.  However it changes dso->long_name to a real
path of the vmlinux file (e.g. /lib/modules/3.16.4/build/vmlinux) if one
is running on a custom kernel.

It resulted in that perf report reads the build-id of the vmlinux, but
cannot use it since it only knows about the [kernel.kallsyms] map.  It
then falls back to possible vmlinux paths by using the recorded kernel
version (in case of a recent version) or a running kernel silently.

Even with the recent tools, this still has a possibility of breaking
the result.  As the build directory is a symbolic link, if one built a
new kernel in the same directory with different source/config, the old
link to vmlinux will point the new file.  So it's absolutely needed to
use build-id when finding a kernel image.

In this patch, it's now changed to try to search a kernel dso in the
existing dso list which was constructed during build-id table parsing
so it'll always have a build-id.  If not found, search "[kernel.kallsyms]".

Before:

  $ perf report
  # Children      Self  Command  Shared Object      Symbol
  # ........  ........  .......  .................  ...............................
  #
      72.15%     0.00%  swapper  [kernel.kallsyms]  [k] set_curr_task_rt
      72.15%     0.00%  swapper  [kernel.kallsyms]  [k] native_calibrate_tsc
      72.15%     0.00%  swapper  [kernel.kallsyms]  [k] tsc_refine_calibration_work
      71.87%    71.87%  swapper  [kernel.kallsyms]  [k] module_finalize
   ...

After (for the same perf.data):

      72.15%     0.00%  swapper  vmlinux  [k] cpu_startup_entry
      72.15%     0.00%  swapper  vmlinux  [k] arch_cpu_idle
      72.15%     0.00%  swapper  vmlinux  [k] default_idle
      71.87%    71.87%  swapper  vmlinux  [k] native_safe_halt
   ...
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NIngo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/20140924073356.GB1962@gmail.com
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1415063674-17206-8-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When perf record finishes a session, it pre-processes samples in order
to write build-id info from DSOs that had samples.

During this process it'll call map__load() for the kernel map, and it
ends up calling dso__load_vmlinux_path() which replaces dso->long_name.

But this function checks kernel's build-id before searching vmlinux path
so it'll end up with a cryptic name, the pathname for the entry in the
~/.debug cache, which can be confusing to users.

This patch adds a flag to skip the build-id check during record, so
that it'll have the original vmlinux path for the kernel dso->long_name,
not the entry in the ~/.debug cache.

Before:
  # perf record -va sleep 3
  mmap size 528384B
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.196 MB perf.data (~8545 samples) ]
  Looking at the vmlinux_path (7 entries long)
  Using /home/namhyung/.debug/.build-id/f0/6e17aa50adf4d00b88925e03775de107611551 for symbols

After:
  # perf record -va sleep 3
  mmap size 528384B
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.193 MB perf.data (~8432 samples) ]
  Looking at the vmlinux_path (7 entries long)
  Using /lib/modules/3.16.4-1-ARCH/build/vmlinux for symbols
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1415063674-17206-7-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It'd be better managing those functions in a separate place as
util/header.c file is already big.

It now exports following 3 functions to others:

  bool perf_session__read_build_ids(struct perf_session *session, bool with_hits);
  int perf_session__write_buildid_table(struct perf_session *session, int fd);
  int perf_session__cache_build_ids(struct perf_session *session);
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Link: http://lkml.kernel.org/r/545733E7.6010105@intel.com
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1415063674-17206-5-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The dsos__write_buildid_table() is not use struct dso and it mostly
uses perf_session struct.

So rename it to perf_session__write_buildid_ table() so that it
corresponds to other related functions such as
perf_session__read_build_ids() and perf_session__cache_build_ids().
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1415063674-17206-4-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Now my Archlinux box shows module symbols correctly.

Before:
  $ perf report --stdio
  Failed to open /tmp/perf-3477.map, continuing without symbols
  no symbols found in /usr/bin/date, maybe install a debug package?
  No kallsyms or vmlinux with build-id 7b4ea0a49ae2111925857099aaf05c3246ff33e0 was found
  [drm] with build id 7b4ea0a49ae2111925857099aaf05c3246ff33e0 not found, continuing without symbols
  No kallsyms or vmlinux with build-id edd931629094b660ca9dec09a1b635c8d87aa2ee was found
  [jbd2] with build id edd931629094b660ca9dec09a1b635c8d87aa2ee not found, continuing without symbols
  No kallsyms or vmlinux with build-id a7b1eada671c34933e5610bb920b2ca4945a82c3 was found
  [ext4] with build id a7b1eada671c34933e5610bb920b2ca4945a82c3 not found, continuing without symbols
  No kallsyms or vmlinux with build-id d69511fa3e5840e770336ef45b06c83fef8d74e3 was found
  [scsi_mod] with build id d69511fa3e5840e770336ef45b06c83fef8d74e3 not found, continuing without symbols
  No kallsyms or vmlinux with build-id af0430af13461af058770ee9b87afc07922c2e77 was found
  [libata] with build id af0430af13461af058770ee9b87afc07922c2e77 not found, continuing without symbols
  No kallsyms or vmlinux with build-id aaeedff8160ce631a5f0333591c6ff291201d29f was found
  [libahci] with build id aaeedff8160ce631a5f0333591c6ff291201d29f not found, continuing without symbols
  No kallsyms or vmlinux with build-id c57907712becaf662dc4981824bb372c0441d605 was found
  [mac80211] with build id c57907712becaf662dc4981824bb372c0441d605 not found, continuing without symbols
  No kallsyms or vmlinux with build-id e0589077cc0ec8c3e4c40eb9f2d9e69d236bee8f was found
  [iwldvm] with build id e0589077cc0ec8c3e4c40eb9f2d9e69d236bee8f not found, continuing without symbols
  No kallsyms or vmlinux with build-id 2d86086bf136bf374a2f029cf85a48194f9b950b was found
  [cfg80211] with build id 2d86086bf136bf374a2f029cf85a48194f9b950b not found, continuing without symbols
  No kallsyms or vmlinux with build-id 4493c48599bdb3d91d0f8db5150e0be33fdd9221 was found
  [iwlwifi] with build id 4493c48599bdb3d91d0f8db5150e0be33fdd9221 not found, continuing without symbols
  ...
  #
  # Overhead  Command          Shared Object            Symbol
  # ........  ...............  .......................  ........................................................
  #
       0.03%  swapper          [ext4]                   [k] 0x000000000000fe2e
       0.03%  swapper          [kernel.kallsyms]        [k] account_entity_enqueue
       0.03%  swapper          [ext4]                   [k] 0x000000000000fc2b
       0.03%  irq/50-iwlwifi   [iwlwifi]                [k] 0x000000000000200b
       0.03%  swapper          [kernel.kallsyms]        [k] ktime_add_safe
       0.03%  swapper          [kernel.kallsyms]        [k] elv_completed_request
       0.03%  swapper          [libata]                 [k] 0x0000000000003997
       0.03%  swapper          [libahci]                [k] 0x0000000000001f25
       0.03%  swapper          [kernel.kallsyms]        [k] rb_next
       0.03%  swapper          [kernel.kallsyms]        [k] blk_finish_request
       0.03%  swapper          [ext4]                   [k] 0x0000000000010248
       0.00%  perf             [kernel.kallsyms]        [k] native_write_msr_safe

After:
  $ perf report --stdio
  Failed to open /tmp/perf-3477.map, continuing without symbols
  no symbols found in /usr/bin/tr, maybe install a debug package?
  ...
  #
  # Overhead  Command          Shared Object                Symbol
  # ........  ...............  ...........................  ......................................................
  #

       0.04%  kworker/u16:3    [ext4]                       [k] ext4_read_block_bitmap
       0.03%  kworker/u16:0    [mac80211]                   [k] ieee80211_sta_reset_beacon_monitor
       0.02%  irq/50-iwlwifi   [mac80211]                   [k] ieee80211_get_bssid
       0.02%  firefox          [e1000e]                     [k] __ew32_prepare
       0.02%  swapper          [libahci]                    [k] ahci_handle_port_interrupt
       0.02%  emacs            libglib-2.0.so.0.4000.0      [.] g_mutex_unlock
       0.02%  swapper          [e1000e]                     [k] e1000_clean_tx_irq
       0.02%  dwm              [kernel.kallsyms]            [k] __schedule
       0.02%  gnome-terminal-  [vdso]                       [.] __vdso_clock_gettime
       0.02%  swapper          [e1000e]                     [k] e1000_alloc_rx_buffers
       0.02%  irq/50-iwlwifi   [mac80211]                   [k] ieee80211_rx
       0.01%  firefox          [vdso]                       [.] __vdso_gettimeofday
       0.01%  irq/50-iwlwifi   [iwlwifi]                    [k] iwl_pcie_rxq_restock.part.13
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/87h9yexshi.fsf@sejong.aot.lge.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This patch adds basic support to handle compressed kernel module as some
distro (such as Archlinux) carries on it now.  The actual work using
compression library will be added later.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1415063674-17206-2-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Because we're all human and typing sucks..

Fixes: 7fb0f1de ("perf/x86: Fix compile warnings for intel_uncore")
Reported-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/n/tip-be0bftjh8yfm4uvmvtf3yi87@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Pull pin-control fixes from Linus Walleij:
 "This kernel cycle has been calm for both pin control and GPIO so far
  but here are three pin control patches for you anyway, only really
  dealing with Baytrail:

   - Two fixes for the Baytrail driver affecting IRQs and output state
     in sysfs
   - Use the linux-gpio mailing list also for pinctrl patches"

* tag 'pinctrl-v3.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: baytrail: show output gpio state correctly on Intel Baytrail
  pinctrl: use linux-gpio mailing list
  pinctrl: baytrail: Clear DIRECT_IRQ bit

Pull CMA and DMA-mapping fixes from Marek Szyprowski:
 "This contains important fixes for recently introduced highmem support
  for default contiguous memory region used for dma-mapping subsystem"

* 'fixes-for-v3.18' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
  mm, cma: make parameters order consistent in func declaration and definition
  mm: cma: Use %pa to print physical addresses
  mm: cma: Ensure that reservations never cross the low/high mem boundary
  mm: cma: Always consider a 0 base address reservation as dynamic
  mm: cma: Don't crash on allocation if CMA area can't be activated

Pull ceph fixes from Sage Weil:
 "There is a GFP flag fix from Mike Christie, an error code fix from
  Jan, and fixes for two unnecessary allocations (kmalloc and workqueue)
  from Ilya.  All are well tested.

  Ilya has one other fix on the way but it didn't get tested in time"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  libceph: eliminate unnecessary allocation in process_one_ticket()
  rbd: Fix error recovery in rbd_obj_read_sync()
  libceph: use memalloc flags for net IO
  rbd: use a single workqueue for all devices

Pull m68k update from Geert Uytterhoeven.

Just wiring up the bpf system call.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Wire up bpf

Pull ARM SoC fixes from Olof Johansson:
 "A surprisingly small batch of fixes for -rc3.  Suspiciously small, I'd
  say.

  Anyway, most of this are a few defconfig updates.  Some for omap to
  deal with kernel binary size (moving ipv6 to module, etc).  A larger
  one for socfpga that refreshes with some churn, but also turns on a
  few options that makes the newly-added board in my bootfarm usable for
  testing.

  OMAP3 will also now warn when booted with legacy (non-DT) boot
  protocols, hopefully encouraging those who still care about some of
  those platforms to submit DT support and report bugs where needed.
  Nothing stops working though, this is just to warn for future
  deprecation.

  Beyond this, very few actual bugfixes.  A PXA fix for DEBUG_LL boot
  hangs, a missing terminting entry in a dt_match array on RealView a
  MTD fix on OMAP with NAND"

[ Obviously missed rc3, will make rc4 instead ;) ]

* tag 'armsoc-for-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  MAINTAINERS: drop list entry for davinci
  ARM: OMAP2+: Warn about deprecated legacy booting mode
  ARM: omap2plus_defconfig: Fix errors with NAND BCH
  ARM: multi_v7_defconfig: fix support for APQ8084
  soc: versatile: Add terminating entry for realview_soc_of_match
  ARM: ixp4xx: remove compilation warnings in io.h
  MAINTAINERS: Add Soren as reviewer for Zynq
  ARM: omap2plus_defconfig: Fix bloat caused by having ipv6 built-in
  ARM: socfpga_defconfig: Update defconfig for SoCFPGA
  ARM: pxa: fix hang on startup with DEBUG_LL

Tracing for a workload begins before the comm event is seen, which
results in the initial comm having a string of the form ":<pid>" (e.g.
":12345").

In order to export the correct string, defer the export until the new
script 'flush' callback.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1414678188-14946-8-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add the ability to export detailed information about paired calls and
returns to Python db export and the export-to-postgresql.py script.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1414678188-14946-7-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Make it possible for the database export API to use the enhanced thread
stack and export detailed information about paired calls and returns.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1414678188-14946-6-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add branch_type and in_tx to Python db export and the
export-to-postgresql.py script.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1414678188-14946-4-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add the ability to export branch types through the database export
facility.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1414678188-14946-3-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Enhance the thread stack to output detailed information about paired
calls and returns.

The enhanced processing consumes sample information via
thread_stack__process() and outputs information about paired calls /
returns via a call-back.

While the call-back makes it possible for the facility to be used by
arbitrary tools, a subsequent patch will provide the information to
Python scripting via the db-export interface.

An important part of the call/return information is the
call path which provides a structure that defines a context
sensitive call graph.

Note that there are now two ways to use the thread stack.

For simply providing a call stack (like you would get from the perf
record -g option) the interface consists of thread_stack__event() and
thread_stack__sample().

Whereas the enhanced interface consists of call_return_processor__new()
and thread_stack__process().
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1414678188-14946-5-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add a thread stack for synthesizing call chains from call and return
events.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1414678188-14946-2-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Pull MTD fixes from Brian Norris:
 "Three main MTD fixes for 3.18:

   - A regression from 3.16 which was noticed in 3.17.  With the
     restructuring of the m25p80.c driver and the SPI NOR library
     framework, we omitted proper listing of the SPI device IDs.  This
     means m25p80.c wouldn't auto-load (modprobe) properly when built as
     a module.  For now, we duplicate the device IDs into both modules.

   - The OMAP / ELM modules were depending on an implicit link ordering.
     Use deferred probing so that the new link order (in 3.18-rc) can
     still allow for successful probing.

   - Fix suspend/resume support for LH28F640BF NOR flash"

* tag 'for-linus-20141102' of git://git.infradead.org/linux-mtd:
  mtd: cfi_cmdset_0001.c: fix resume for LH28F640BF chips
  mtd: omap: fix mtd devices not showing up
  mtd: m25p80,spi-nor: Fix module aliases for m25p80
  mtd: spi-nor: make spi_nor_scan() take a chip type name, not spi_device_id
  mtd: m25p80: get rid of spi_get_device_id

Pull SCSI fixes from James Bottomley:
 "This is a set of six patches consisting of:
   - two MAINTAINER updates
   - two scsi-mq fixs for the old parallel interface (not every request
     is tagged and we need to set the right flags to populate the SPI
     tag message)
   - a fix for a memory leak in scatterlist traversal caused by a
     preallocation update in 3.17
   - an ipv6 fix for cxgbi"

[ The scatterlist fix also came in separately through the block layer tree ]

* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  MAINTAINERS: ufs - remove self
  MAINTAINERS: change hpsa and cciss maintainer
  libcxgbi : support ipv6 address host_param
  scsi: set REQ_QUEUE for the blk-mq case
  Revert "block: all blk-mq requests are tagged"
  lib/scatterlist: fix memory leak with scsi-mq

Pull drm fixes from Dave Airlie:
 "Nothing too astounding or major: radeon, i915, vmwgfx, armada and
  exynos.

  Biggest ones:
   - vmwgfx has one big locking regression fix
   - i915 has come displayport fixes
   - radeon has some stability and a memory alloc failure
   - armada and exynos have some vblank fixes"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (24 commits)
  drm/exynos: correct connector->dpms field before resuming
  drm/exynos: enable vblank after DPMS on
  drm/exynos: init kms poll at the end of initialization
  drm/exynos: propagate plane initialization errors
  drm/exynos: vidi: fix build warning
  drm/exynos: remove explicit encoder/connector de-initialization
  drm/exynos: init vblank with real number of crtcs
  drm/vmwgfx: Filter out modes those cannot be supported by the current VRAM size.
  drm/vmwgfx: Fix hash key computation
  drm/vmwgfx: fix lock breakage
  drm/i915/dp: only use training pattern 3 on platforms that support it
  drm/radeon: remove some buggy dead code
  drm/i915: Ignore VBT backlight check on Macbook 2, 1
  drm/radeon: remove invalid pci id
  drm/radeon: dpm fixes for asrock systems
  radeon: clean up coding style differences in radeon_get_bios()
  drm/radeon: Use drm_malloc_ab instead of kmalloc_array
  drm/radeon/dpm: disable ulv support on SI
  drm/i915: Fix GMBUSFREQ on vlv/chv
  drm/i915: Ignore long hpds on eDP ports
  ...