stable inclusion
from stable-5.10.17
commit 90ac1981acfaf57f8976e4af8b12516532992f04
bugzilla: 48169

--------------------------------

commit aee9ddb1 upstream.

Currently there's a KCOV remote coverage collection section in
__usb_hcd_giveback_urb(). Initially that section was added based on the
assumption that usb_hcd_giveback_urb() can only be called in interrupt
context as indicated by a comment before it. This is what happens when
syzkaller is fuzzing the USB stack via the dummy_hcd driver.

As it turns out, it's actually valid to call usb_hcd_giveback_urb() in task
context, provided that the caller turned off the interrupts; USB/IP does
exactly that. This can lead to a nested KCOV remote coverage collection
sections both trying to collect coverage in task context. This isn't
supported by KCOV, and leads to a WARNING.

Change __usb_hcd_giveback_urb() to only call kcov_remote_*() callbacks
when it's being executed in a softirq. As the result, the coverage from
USB/IP related usb_hcd_giveback_urb() calls won't be collected, but the
WARNING is fixed.

A potential future improvement would be to support nested remote coverage
collection sections, but this patch doesn't address that.
Reviewed-by: NDmitry Vyukov <dvyukov@google.com>
Acked-by: NMarco Elver <elver@google.com>
Signed-off-by: NAndrey Konovalov <andreyknvl@google.com>
Link: https://lore.kernel.org/r/f3a7a153f0719cb53ec385b16e912798bd3e4cf9.1602856358.git.andreyknvl@google.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.17
commit e5c376c41a5798451355fb2e0732847be4a64c58
bugzilla: 48169

--------------------------------

commit cef4cbff upstream.

There was a syzbot report with this warning but insufficient information...
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.17
commit 57068800258f472d09d7fea549fe587f653e0ede
bugzilla: 48169

--------------------------------

commit 2a80c158 upstream.

syzbot found WARNING in qrtr_tun_write_iter [1] when write_iter length
exceeds KMALLOC_MAX_SIZE causing order >= MAX_ORDER condition.

Additionally, there is no check for 0 length write.

[1]
WARNING: mm/page_alloc.c:5011
[..]
Call Trace:
 alloc_pages_current+0x18c/0x2a0 mm/mempolicy.c:2267
 alloc_pages include/linux/gfp.h:547 [inline]
 kmalloc_order+0x2e/0xb0 mm/slab_common.c:837
 kmalloc_order_trace+0x14/0x120 mm/slab_common.c:853
 kmalloc include/linux/slab.h:557 [inline]
 kzalloc include/linux/slab.h:682 [inline]
 qrtr_tun_write_iter+0x8a/0x180 net/qrtr/tun.c:83
 call_write_iter include/linux/fs.h:1901 [inline]

Reported-by: syzbot+c2a7e5c5211605a90865@syzkaller.appspotmail.com
Signed-off-by: NSabyrzhan Tasbolatov <snovitoll@gmail.com>
Link: https://lore.kernel.org/r/20210202092059.1361381-1-snovitoll@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.17
commit 862d1c0edd2126037816a8e0d8d1adacba84c74f
bugzilla: 48169

--------------------------------

commit a11148e6 upstream.

syzbot found WARNING in rds_rdma_extra_size [1] when RDS_CMSG_RDMA_ARGS
control message is passed with user-controlled
0x40001 bytes of args->nr_local, causing order >= MAX_ORDER condition.

The exact value 0x40001 can be checked with UIO_MAXIOV which is 0x400.
So for kcalloc() 0x400 iovecs with sizeof(struct rds_iovec) = 0x10
is the closest limit, with 0x10 leftover.

Same condition is currently done in rds_cmsg_rdma_args().

[1] WARNING: mm/page_alloc.c:5011
[..]
Call Trace:
 alloc_pages_current+0x18c/0x2a0 mm/mempolicy.c:2267
 alloc_pages include/linux/gfp.h:547 [inline]
 kmalloc_order+0x2e/0xb0 mm/slab_common.c:837
 kmalloc_order_trace+0x14/0x120 mm/slab_common.c:853
 kmalloc_array include/linux/slab.h:592 [inline]
 kcalloc include/linux/slab.h:621 [inline]
 rds_rdma_extra_size+0xb2/0x3b0 net/rds/rdma.c:568
 rds_rm_size net/rds/send.c:928 [inline]

Reported-by: syzbot+1bd2b07f93745fa38425@syzkaller.appspotmail.com
Signed-off-by: NSabyrzhan Tasbolatov <snovitoll@gmail.com>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
Link: https://lore.kernel.org/r/20210201203233.1324704-1-snovitoll@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.17
commit 69e9fd9de17e839920149e0906f4758667d3cee7
bugzilla: 48169

--------------------------------

commit 1c5fae9c upstream.

In vsock_shutdown() we touched some socket fields without holding the
socket lock, such as 'state' and 'sk_flags'.

Also, after the introduction of multi-transport, we are accessing
'vsk->transport' in vsock_send_shutdown() without holding the lock
and this call can be made while the connection is in progress, so
the transport can change in the meantime.

To avoid issues, we hold the socket lock when we enter in
vsock_shutdown() and release it when we leave.

Among the transports that implement the 'shutdown' callback, only
hyperv_transport acquired the lock. Since the caller now holds it,
we no longer take it.

Fixes: d021c344 ("VSOCK: Introduce VM Sockets")
Signed-off-by: NStefano Garzarella <sgarzare@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.17
commit afe31701609b6ccf5cc637fb229383c26d72d478
bugzilla: 48169

--------------------------------

commit ce7536bc upstream.

If the socket is closed or is being released, some resources used by
virtio_transport_space_update() such as 'vsk->trans' may be released.

To avoid a use after free bug we should only update the available credit
when we are sure the socket is still open and we have the lock held.

Fixes: 06a8fc78 ("VSOCK: Introduce virtio_vsock_common.ko")
Signed-off-by: NStefano Garzarella <sgarzare@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20210208144454.84438-1-sgarzare@redhat.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.17
commit ba3bcb35d783805f2b3ebf2ebf61702cd68f4959
bugzilla: 48169

--------------------------------

commit 059d2a10 upstream.

Now that MRP started to use also SWITCHDEV_ATTR_ID_PORT_STP_STATE to
notify HW, then SWITCHDEV_ATTR_ID_MRP_PORT_STAT is not used anywhere
else, therefore we can remove it.

Fixes: c284b545 ("switchdev: mrp: Extend switchdev API to offload MRP")
Signed-off-by: NHoratiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.17
commit 55ad30cb7f73b575570f2a39772b88ff25308b27
bugzilla: 48169

--------------------------------

commit b2bdba1c upstream.

The function br_mrp_port_switchdev_set_state was called both with MRP
port state and STP port state, which is an issue because they don't
match exactly.

Therefore, update the function to be used only with STP port state and
use the id SWITCHDEV_ATTR_ID_PORT_STP_STATE.

The choice of using STP over MRP is that the drivers already implement
SWITCHDEV_ATTR_ID_PORT_STP_STATE and already in SW we update the port
STP state.

Fixes: 9a9f26e8 ("bridge: mrp: Connect MRP API with the switchdev API")
Fixes: fadd4091 ("bridge: switchdev: mrp: Implement MRP API for switchdev")
Fixes: 2f1a11ae ("bridge: mrp: Add MRP interface.")
Reported-by: NRasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: NHoratiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.17
commit e22b963d3ec9a510c44d02ff7262fcec49098533
bugzilla: 48169

--------------------------------

commit 3aa6bce9 upstream.

Prevent netif_tx_disable() running concurrently with dev_watchdog() by
taking the device global xmit lock. Otherwise, the recommended:

	netif_carrier_off(dev);
	netif_tx_disable(dev);

driver shutdown sequence can happen after the watchdog has already
checked carrier, resulting in possible false alarms. This is because
netif_tx_lock() only sets the frozen bit without maintaining the locks
on the individual queues.

Fixes: c3f26a26 ("netdev: Fix lockdep warnings in multiqueue configurations.")
Signed-off-by: NEdwin Peer <edwin.peer@broadcom.com>
Reviewed-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.17
commit bc21a88465c2778f1c877859475adacb1be1821d
bugzilla: 48169

--------------------------------

commit 3d0bc44d upstream.

A possible locking issue in vsock_connect_timeout() was recognized by
Eric Dumazet which might cause a null pointer dereference in
vsock_transport_cancel_pkt(). This patch assures that
vsock_transport_cancel_pkt() will be called within the lock, so a race
condition won't occur which could result in vsk->transport to be set to NULL.

Fixes: 380feae0 ("vsock: cancel packets when failing to connect")
Reported-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NNorbert Slusarek <nslusarek@gmx.net>
Reviewed-by: NStefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/trinity-f8e0937a-cf0e-4d80-a76e-d9a958ba3ef1-1612535522360@3c-app-gmx-bap12Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.17
commit fcee53dc03c5aa5bca6631fa0aa900efc3079236
bugzilla: 48169

--------------------------------

commit 5d1cbcc9 upstream.

In vsock_stream_connect(), a thread will enter schedule_timeout().
While being scheduled out, another thread can enter vsock_stream_connect()
as well and set vsk->transport to NULL. In case a signal was sent, the
first thread can leave schedule_timeout() and vsock_transport_cancel_pkt()
will be called right after. Inside vsock_transport_cancel_pkt(), a null
dereference will happen on transport->cancel_pkt.

Fixes: c0cfa2d8 ("vsock: add multi-transports support")
Signed-off-by: NNorbert Slusarek <nslusarek@gmx.net>
Reviewed-by: NStefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/trinity-c2d6cede-bfb1-44e2-85af-1fbc7f541715-1612535117028@3c-app-gmx-bap12Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.17
commit c9013813413e12c8968e22964e314841b93af3c5
bugzilla: 48169

--------------------------------

commit af8085f3 upstream.

The sctp transport seq_file iterators take a reference to the transport
in the ->start and ->next functions and releases the reference in the
->show function.  The preferred handling for such resources is to
release them in the subsequent ->next or ->stop function call.

Since Commit 1f4aace6 ("fs/seq_file.c: simplify seq_file iteration
code and interface") there is no guarantee that ->show will be called
after ->next, so this function can now leak references.

So move the sctp_transport_put() call to ->next and ->stop.

Fixes: 1f4aace6 ("fs/seq_file.c: simplify seq_file iteration code and interface")
Reported-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NNeilBrown <neilb@suse.de>
Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.17
commit 9e6ce473e96ba0ad63820325892373d24c1aa8aa
bugzilla: 48169

--------------------------------

commit 8dc1c444 upstream.

Commit c8079432 ("net: Fix packet reordering caused by GRO and
listified RX cooperation") had the unfortunate effect of adding
latencies in common workloads.

Before the patch, GRO packets were immediately passed to
upper stacks.

After the patch, we can accumulate quite a lot of GRO
packets (depdending on NAPI budget).

My fix is counting in napi->rx_count number of segments
instead of number of logical packets.

Fixes: c8079432 ("net: Fix packet reordering caused by GRO and listified RX cooperation")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Bisected-by: NJohn Sperbeck <jsperbeck@google.com>
Tested-by: NJian Yang <jianyang@google.com>
Cc: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: NSaeed Mahameed <saeedm@nvidia.com>
Reviewed-by: NEdward Cree <ecree.xilinx@gmail.com>
Reviewed-by: NAlexander Lobakin <alobakin@pm.me>
Link: https://lore.kernel.org/r/20210204213146.4192368-1-eric.dumazet@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.17
commit 18193e09834cbb6e645861bc26c5ae184441e0d2
bugzilla: 48169

--------------------------------

commit d11a1d08 upstream.

If the maximum performance level taken for computing the
arch_max_freq_ratio value used in the x86 scale-invariance code is
higher than the one corresponding to the cpuinfo.max_freq value
coming from the acpi_cpufreq driver, the scale-invariant utilization
falls below 100% even if the CPU runs at cpuinfo.max_freq or slightly
faster, which causes the schedutil governor to select a frequency
below cpuinfo.max_freq.  That frequency corresponds to a frequency
table entry below the maximum performance level necessary to get to
the "boost" range of CPU frequencies which prevents "boost"
frequencies from being used in some workloads.

While this issue is related to scale-invariance, it may be amplified
by commit db865272 ("cpufreq: Avoid configuring old governors as
default with intel_pstate") from the 5.10 development cycle which
made it extremely easy to default to schedutil even if the preferred
driver is acpi_cpufreq as long as intel_pstate is built too, because
the mere presence of the latter effectively removes the ondemand
governor from the defaults.  Distro kernels are likely to include
both intel_pstate and acpi_cpufreq on x86, so their users who cannot
use intel_pstate or choose to use acpi_cpufreq may easily be
affectecd by this issue.

If CPPC is available, it can be used to address this issue by
extending the frequency tables created by acpi_cpufreq to cover the
entire available frequency range (including "boost" frequencies) for
each CPU, but if CPPC is not there, acpi_cpufreq has no idea what
the maximum "boost" frequency is and the frequency tables created by
it cannot be extended in a meaningful way, so in that case make it
ask the arch scale-invariance code to to use the "nominal" performance
level for CPU utilization scaling in order to avoid the issue at hand.

Fixes: db865272 ("cpufreq: Avoid configuring old governors as default with intel_pstate")
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: NGiovanni Gherdovich <ggherdovich@suse.cz>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.17
commit 8a3fc32b322cc3081dd3569047c9834f496b4ab0
bugzilla: 48169

--------------------------------

commit 3c55e94c upstream.

A severe performance regression on AMD EPYC processors when using
the schedutil scaling governor was discovered by Phoronix.com and
attributed to the following commits:

  41ea6672 ("x86, sched: Calculate frequency invariance for AMD
  systems")

  976df7e5 ("x86, sched: Use midpoint of max_boost and max_P for
  frequency invariance on AMD EPYC")

The source of the problem is that the maximum performance level taken
for computing the arch_max_freq_ratio value used in the x86 scale-
invariance code is higher than the one corresponding to the
cpuinfo.max_freq value coming from the acpi_cpufreq driver.

This effectively causes the scale-invariant utilization to fall below
100% even if the CPU runs at cpuinfo.max_freq or slightly faster, so
the schedutil governor selects a frequency below cpuinfo.max_freq
then.  That frequency corresponds to a frequency table entry below
the maximum performance level necessary to get to the "boost" range
of CPU frequencies.

However, if the cpuinfo.max_freq value coming from acpi_cpufreq was
higher, the schedutil governor would select higher frequencies which
in turn would allow acpi_cpufreq to set more adequate performance
levels and to get to the "boost" range of CPU frequencies more often.

This issue affects any systems where acpi_cpufreq is used and the
"boost" (or "turbo") frequencies are enabled, not just AMD EPYC.
Moreover, commit db865272 ("cpufreq: Avoid configuring old
governors as default with intel_pstate") from the 5.10 development
cycle made it extremely easy to default to schedutil even if the
preferred driver is acpi_cpufreq as long as intel_pstate is built
too, because the mere presence of the latter effectively removes the
ondemand governor from the defaults.  Distro kernels are likely to
include both intel_pstate and acpi_cpufreq on x86, so their users
who cannot use intel_pstate or choose to use acpi_cpufreq may
easily be affectecd by this issue.

To address this issue, extend the frequency table constructed by
acpi_cpufreq for each CPU to cover the entire range of available
frequencies (including the "boost" ones) if CPPC is available and
indicates that "boost" (or "turbo") frequencies are enabled.  That
causes cpuinfo.max_freq to become the maximum "boost" frequency of
the given CPU (instead of the maximum frequency returned by the ACPI
_PSS object that corresponds to the "nominal" performance level).

Fixes: 41ea6672 ("x86, sched: Calculate frequency invariance for AMD systems")
Fixes: 976df7e5 ("x86, sched: Use midpoint of max_boost and max_P for frequency invariance on AMD EPYC")
Fixes: db865272 ("cpufreq: Avoid configuring old governors as default with intel_pstate")
Link: https://www.phoronix.com/scan.php?page=article&item=linux511-amd-schedutil&num=1
Link: https://lore.kernel.org/linux-pm/20210203135321.12253-2-ggherdovich@suse.cz/Reported-by: NMichael Larabel <Michael@phoronix.com>
Diagnosed-by: NGiovanni Gherdovich <ggherdovich@suse.cz>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: NGiovanni Gherdovich <ggherdovich@suse.cz>
Reviewed-by: NGiovanni Gherdovich <ggherdovich@suse.cz>
Tested-by: NMichael Larabel <Michael@phoronix.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.17
commit c930943a368336be15b909cc1d6c344eceb3bd5e
bugzilla: 48169

--------------------------------

commit 8fd54a73 upstream.

Since teardown is supposed to undo the effects of the setup method, it
should be called in the error path for dsa_switch_setup, not just in
dsa_switch_teardown.

Fixes: 5e3f847a ("net: dsa: Add teardown callback for drivers")
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210204163351.2929670-1-vladimir.oltean@nxp.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.17
commit 46a831d1cc25f559a5ef46aff35e39795b61a94c
bugzilla: 48169

--------------------------------

commit 52cbd23a upstream.

When iteratively computing a checksum with csum_block_add, track the
offset "pos" to correctly rotate in csum_block_add when offset is odd.

The open coded implementation of skb_copy_and_csum_datagram did this.
With the switch to __skb_datagram_iter calling csum_and_copy_to_iter,
pos was reinitialized to 0 on each call.

Bring back the pos by passing it along with the csum to the callback.

Changes v1->v2
  - pass csum value, instead of csump pointer (Alexander Duyck)

Link: https://lore.kernel.org/netdev/20210128152353.GB27281@optiplex/
Fixes: 950fcaec ("datagram: consolidate datagram copy to iter helpers")
Reported-by: NOliver Graute <oliver.graute@gmail.com>
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Reviewed-by: NAlexander Duyck <alexanderduyck@fb.com>
Reviewed-by: NEric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20210203192952.1849843-1-willemdebruijn.kernel@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.17
commit 24f5544f76d38cf55903a62cc9b1dbf264eb5807
bugzilla: 48169

--------------------------------

commit 7b5eab57 upstream.

At the end of rxrpc_release_call(), rxrpc_cleanup_ring() is called to clear
the Rx/Tx skbuff ring, but this doesn't lock the ring whilst it's accessing
it.  Unfortunately, rxrpc_resend() might be trying to retransmit a packet
concurrently with this - and whilst it does lock the ring, this isn't
protection against rxrpc_cleanup_call().

Fix this by removing the call to rxrpc_cleanup_ring() from
rxrpc_release_call().  rxrpc_cleanup_ring() will be called again anyway
from rxrpc_cleanup_call().  The earlier call is just an optimisation to
recycle skbuffs more quickly.

Alternative solutions include rxrpc_release_call() could try to cancel the
work item or wait for it to complete or rxrpc_cleanup_ring() could lock
when accessing the ring (which would require a bh lock).

This can produce a report like the following:

  BUG: KASAN: use-after-free in rxrpc_send_data_packet+0x19b4/0x1e70 net/rxrpc/output.c:372
  Read of size 4 at addr ffff888011606e04 by task kworker/0:0/5
  ...
  Workqueue: krxrpcd rxrpc_process_call
  Call Trace:
   ...
   kasan_report.cold+0x79/0xd5 mm/kasan/report.c:413
   rxrpc_send_data_packet+0x19b4/0x1e70 net/rxrpc/output.c:372
   rxrpc_resend net/rxrpc/call_event.c:266 [inline]
   rxrpc_process_call+0x1634/0x1f60 net/rxrpc/call_event.c:412
   process_one_work+0x98d/0x15f0 kernel/workqueue.c:2275
   ...

  Allocated by task 2318:
   ...
   sock_alloc_send_pskb+0x793/0x920 net/core/sock.c:2348
   rxrpc_send_data+0xb51/0x2bf0 net/rxrpc/sendmsg.c:358
   rxrpc_do_sendmsg+0xc03/0x1350 net/rxrpc/sendmsg.c:744
   rxrpc_sendmsg+0x420/0x630 net/rxrpc/af_rxrpc.c:560
   ...

  Freed by task 2318:
   ...
   kfree_skb+0x140/0x3f0 net/core/skbuff.c:704
   rxrpc_free_skb+0x11d/0x150 net/rxrpc/skbuff.c:78
   rxrpc_cleanup_ring net/rxrpc/call_object.c:485 [inline]
   rxrpc_release_call+0x5dd/0x860 net/rxrpc/call_object.c:552
   rxrpc_release_calls_on_socket+0x21c/0x300 net/rxrpc/call_object.c:579
   rxrpc_release_sock net/rxrpc/af_rxrpc.c:885 [inline]
   rxrpc_release+0x263/0x5a0 net/rxrpc/af_rxrpc.c:916
   __sock_release+0xcd/0x280 net/socket.c:597
   ...

  The buggy address belongs to the object at ffff888011606dc0
   which belongs to the cache skbuff_head_cache of size 232

Fixes: 248f219c ("rxrpc: Rewrite the data and ack handling code")
Reported-by: syzbot+174de899852504e4a74a@syzkaller.appspotmail.com
Reported-by: syzbot+3d1c772efafd3c38d007@syzkaller.appspotmail.com
Signed-off-by: NDavid Howells <dhowells@redhat.com>
cc: Hillf Danton <hdanton@sina.com>
Link: https://lore.kernel.org/r/161234207610.653119.5287360098400436976.stgit@warthog.procyon.org.ukSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.17
commit 975a2396e37cecc42ba006d69d943be149efbeb0
bugzilla: 48169

--------------------------------

commit 68d54cee upstream.

The ptrace(PTRACE_PEEKMTETAGS) implementation checks whether the user
page has valid tags (mapped with PROT_MTE) by testing the PG_mte_tagged
page flag. If this bit is cleared, ptrace(PTRACE_PEEKMTETAGS) returns
-EIO.

A newly created (PROT_MTE) mapping points to the zero page which had its
tags zeroed during cpu_enable_mte(). If there were no prior writes to
this mapping, ptrace(PTRACE_PEEKMTETAGS) fails with -EIO since the zero
page does not have the PG_mte_tagged flag set.

Set PG_mte_tagged on the zero page when its tags are cleared during
boot. In addition, to avoid ptrace(PTRACE_PEEKMTETAGS) succeeding on
!PROT_MTE mappings pointing to the zero page, change the
__access_remote_tags() check to (vm_flags & VM_MTE) instead of
PG_mte_tagged.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Fixes: 34bfeea4 ("arm64: mte: Clear the tags when a page is mapped in user-space with PROT_MTE")
Cc: <stable@vger.kernel.org> # 5.10.x
Cc: Will Deacon <will@kernel.org>
Reported-by: NLuis Machado <luis.machado@linaro.org>
Tested-by: NLuis Machado <luis.machado@linaro.org>
Reviewed-by: NVincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20210210180316.23654-1-catalin.marinas@arm.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.17
commit 3ed6cc9c2dd08a2ed29f43b5916cb16c3318e98a
bugzilla: 48169

--------------------------------

commit 70245f86 upstream.

Invoking x86_init.irqs.create_pci_msi_domain() before
x86_init.pci.arch_init() breaks XEN PV.

The XEN_PV specific pci.arch_init() function overrides the default
create_pci_msi_domain() which is obviously too late.

As a consequence the XEN PV PCI/MSI allocation goes through the native
path which runs out of vectors and causes malfunction.

Invoke it after x86_init.pci.arch_init().

Fixes: 6b15ffa0 ("x86/irq: Initialize PCI/MSI domain at PCI init time")
Reported-by: NJuergen Gross <jgross@suse.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NJuergen Gross <jgross@suse.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87pn18djte.fsf@nanos.tec.linutronix.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.17
commit 902c6dcbb146eb119ae539a231103619855df6a0
bugzilla: 48169

--------------------------------

commit fe968c41 upstream.

Fixes: 2cea4a7a ("scripts: use pkg-config to locate libcrypto")
Signed-off-by: NRolf Eike Beer <eb@emlix.com>
Cc: stable@vger.kernel.org # 5.6.x
Signed-off-by: NMasahiro Yamada <masahiroy@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.17
commit 4761b1aabcfd36d5a4d0528168c474926bd7b2f9
bugzilla: 48169

--------------------------------

[ Upstream commit ade9679c ]

Fix a build error for undefined 'TI_PRE_COUNT' by adding it to
asm-offsets.c.

  h8300-linux-ld: arch/h8300/kernel/entry.o: in function `resume_kernel': (.text+0x29a): undefined reference to `TI_PRE_COUNT'

Link: https://lkml.kernel.org/r/20210212021650.22740-1-rdunlap@infradead.org
Fixes: df2078b8 ("h8300: Low level entry")
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Reported-by: Nkernel test robot <lkp@intel.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.17
commit f6b5e671c6a7ee18fb170584e424d9d5a803e1b4
bugzilla: 48169

--------------------------------

[ Upstream commit 3d6a3d3a ]

The digital filter related computation are present in the driver
however the programming of the filter within the IP is missing.
The maximum value for the DNF is wrong and should be 15 instead of 16.

Fixes: aeb068c5 ("i2c: i2c-stm32f7: add driver")
Signed-off-by: NAlain Volmat <alain.volmat@foss.st.com>
Signed-off-by: NPierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>
Signed-off-by: NWolfram Sang <wsa@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.17
commit 0c0ddf0dd69200285652a26a6978a8e4d889b488
bugzilla: 48169

--------------------------------

[ Upstream commit 245090ab ]

CLK_SET_RATE_PARENT flag is checked on parent clock instead of current
one. Fix that.

Fixes: 3f790433 ("clk: sunxi-ng: Adjust MP clock parent rate when allowed")
Reviewed-by: NChen-Yu Tsai <wens@csie.org>
Tested-by: NAndre Heider <a.heider@gmail.com>
Signed-off-by: NJernej Skrabec <jernej.skrabec@siol.net>
Link: https://lore.kernel.org/r/20210209175900.7092-2-jernej.skrabec@siol.netAcked-by: NMaxime Ripard <mripard@kernel.org>
Signed-off-by: NStephen Boyd <sboyd@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.17
commit 664b66e3552c219b7591e772d608160911401288
bugzilla: 48169

--------------------------------

[ Upstream commit 1926a050 ]

It turns out that reasoning for lowering max. supported frequency is
wrong. Scrambling works just fine. Several now fixed bugs prevented
proper functioning, even with rates lower than 340 MHz. Issues were just
more pronounced with higher frequencies.

Fix that by allowing max. supported frequency in HW and fix the comment.

Fixes: cd906375 ("drm/sun4i: DW HDMI: Lower max. supported rate for H6")
Reviewed-by: NChen-Yu Tsai <wens@csie.org>
Tested-by: NAndre Heider <a.heider@gmail.com>
Signed-off-by: NJernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209175900.7092-6-jernej.skrabec@siol.netSigned-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.17
commit 962168c2bc15642969fd1fa0b82e1538dcbd5691
bugzilla: 48169

--------------------------------

[ Upstream commit 6a155216 ]

As it turns out, vendor HDMI PHY driver for H6 has a pretty big table
of predefined values for various pixel clocks. However, most of them are
not useful/tested because they come from reference driver code. Vendor
PHY driver is concerned with only few of those, namely 27 MHz, 74.25
MHz, 148.5 MHz, 297 MHz and 594 MHz. These are all frequencies for
standard CEA modes.

Fix sun50i_h6_cur_ctr and sun50i_h6_phy_config with the values only for
aforementioned frequencies.

Table sun50i_h6_mpll_cfg doesn't need to be changed because values are
actually frequency dependent and not so much SoC dependent. See i.MX6
documentation for explanation of those values for similar PHY.

Fixes: c71c9b2f ("drm/sun4i: Add support for Synopsys HDMI PHY")
Tested-by: NAndre Heider <a.heider@gmail.com>
Signed-off-by: NJernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209175900.7092-5-jernej.skrabec@siol.netSigned-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.17
commit e639cb199b8e3d9331d3d93248d7608527880c0b
bugzilla: 48169

--------------------------------

[ Upstream commit 36b53581 ]

As expected, HDMI controller clock should always match pixel clock. In
the past, changing HDMI controller rate would seemingly worsen
situation. However, that was the result of other bugs which are now
fixed.

Fix that by removing set_rate quirk and always set clock rate.

Fixes: 40bb9d31 ("drm/sun4i: Add support for H6 DW HDMI controller")
Reviewed-by: NChen-Yu Tsai <wens@csie.org>
Tested-by: NAndre Heider <a.heider@gmail.com>
Signed-off-by: NJernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209175900.7092-4-jernej.skrabec@siol.netSigned-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.17
commit 7596c85a8962b92bbfff544af970e8180a5efd4d
bugzilla: 48169

--------------------------------

[ Upstream commit 50791f5d ]

Channel 1 has polarity bits for vsync and hsync signals but driver never
sets them. It turns out that with pre-HDMI2 controllers seemingly there
is no issue if polarity is not set. However, with HDMI2 controllers
(H6) there often comes to de-synchronization due to phase shift. This
causes flickering screen. It's safe to assume that similar issues might
happen also with pre-HDMI2 controllers.

Solve issue with setting vsync and hsync polarity. Note that display
stacks with tcon top have polarity bits actually in tcon0 polarity
register.

Fixes: 9026e0d1 ("drm: Add Allwinner A10 Display Engine support")
Reviewed-by: NChen-Yu Tsai <wens@csie.org>
Tested-by: NAndre Heider <a.heider@gmail.com>
Signed-off-by: NJernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209175900.7092-3-jernej.skrabec@siol.netSigned-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.17
commit 39e855fa959e17a9818e471987ac600f25b85662
bugzilla: 48169

--------------------------------

[ Upstream commit 793f49a8 ]

arm64 references the start address of .builtin_fw (__start_builtin_fw)
with a pair of R_AARCH64_ADR_PREL_PG_HI21/R_AARCH64_LDST64_ABS_LO12_NC
relocations.  The compiler is allowed to emit the
R_AARCH64_LDST64_ABS_LO12_NC relocation because struct builtin_fw in
include/linux/firmware.h is 8-byte aligned.

The R_AARCH64_LDST64_ABS_LO12_NC relocation requires the address to be a
multiple of 8, which may not be the case if .builtin_fw is empty.
Unconditionally align .builtin_fw to fix the linker error.  32-bit
architectures could use ALIGN(4) but that would add unnecessary
complexity, so just use ALIGN(8).

Link: https://lkml.kernel.org/r/20201208054646.2913063-1-maskray@google.com
Link: https://github.com/ClangBuiltLinux/linux/issues/1204
Fixes: 5658c769 ("firmware: allow firmware files to be built into kernel image")
Signed-off-by: NFangrui Song <maskray@google.com>
Reported-by: Nkernel test robot <lkp@intel.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>
Tested-by: NNick Desaulniers <ndesaulniers@google.com>
Tested-by: NDouglas Anderson <dianders@chromium.org>
Acked-by: NNathan Chancellor <nathan@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.17
commit 5ff69431b7633b1cfe30ceff58c6843aa7cb4d46
bugzilla: 48169

--------------------------------

[ Upstream commit 532cfc0d ]

The index is received from vf, if use it directly,
an out-of-bound issue may be caused, so add a check for
this index before using it in hclge_get_rss_key().

Fixes: a638b1d8 ("net: hns3: fix get VF RSS issue")
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.17
commit 2c0e46258eab60dfa447d0ab7e316478f0f852a3
bugzilla: 48169

--------------------------------

[ Upstream commit 326334aa ]

The tqp_index is received from vf, if use it directly,
an out-of-bound issue may be caused, so add a check for
this tqp_index before using it in hclge_get_ring_chain_from_mbx().

Fixes: 84e095d6 ("net: hns3: Change PF to add ring-vect binding & resetQ to mailbox")
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.17
commit 40389ba14d0ee1f7f838e7ba9ba1434eae2aa5df
bugzilla: 48169

--------------------------------

[ Upstream commit 67a69f84 ]

The queue_id is received from vf, if use it directly,
an out-of-bound issue may be caused, so add a check for
this queue_id before using it in hclge_reset_vf_queue().

Fixes: 1a426f8b ("net: hns3: fix the VF queue reset flow error")
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.17
commit 6bbc1d5ee0eb52587d794587af7a7aae126a01eb
bugzilla: 48169

--------------------------------

[ Upstream commit eb4733d7 ]

There are several issues which may be seen when the link goes down while
forwarding traffic, all of which can be attributed to the fact that the
port flushing procedure from the reference manual was not closely
followed.

With flow control enabled on both the ingress port and the egress port,
it may happen when a link goes down that Ethernet packets are in flight.
In flow control mode, frames are held back and not dropped. When there
is enough traffic in flight (example: iperf3 TCP), then the ingress port
might enter congestion and never exit that state. This is a problem,
because it is the egress port's link that went down, and that has caused
the inability of the ingress port to send packets to any other port.
This is solved by flushing the egress port's queues when it goes down.

There is also a problem when performing stream splitting for
IEEE 802.1CB traffic (not yet upstream, but a sort of multicast,
basically). There, if one port from the destination ports mask goes
down, splitting the stream towards the other destinations will no longer
be performed. This can be traced down to this line:

	ocelot_port_writel(ocelot_port, 0, DEV_MAC_ENA_CFG);

which should have been instead, as per the reference manual:

	ocelot_port_rmwl(ocelot_port, 0, DEV_MAC_ENA_CFG_RX_ENA,
			 DEV_MAC_ENA_CFG);

Basically only DEV_MAC_ENA_CFG_RX_ENA should be disabled, but not
DEV_MAC_ENA_CFG_TX_ENA - I don't have further insight into why that is
the case, but apparently multicasting to several ports will cause issues
if at least one of them doesn't have DEV_MAC_ENA_CFG_TX_ENA set.

I am not sure what the state of the Ocelot VSC7514 driver is, but
probably not as bad as Felix/Seville, since VSC7514 uses phylib and has
the following in ocelot_adjust_link:

	if (!phydev->link)
		return;

therefore the port is not really put down when the link is lost, unlike
the DSA drivers which use .phylink_mac_link_down for that.

Nonetheless, I put ocelot_port_flush() in the common ocelot.c because it
needs to access some registers from drivers/net/ethernet/mscc/ocelot_rew.h
which are not exported in include/soc/mscc/ and a bugfix patch should
probably not move headers around.

Fixes: bdeced75 ("net: dsa: felix: Add PCS operations for PHYLINK")
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.17
commit 03bf0f163df2b777c73739f15d723c90b76df5e8
bugzilla: 48169

--------------------------------

[ Upstream commit 256b92af ]

Commit

  20bf2b37 ("x86/build: Disable CET instrumentation in the kernel")

disabled CET instrumentation which gets added by default by the Ubuntu
gcc9 and 10 by default, but did that only for 64-bit builds. It would
still fail when building a 32-bit target. So disable CET for all x86
builds.

Fixes: 20bf2b37 ("x86/build: Disable CET instrumentation in the kernel")
Reported-by: NAC <achirvasub@gmail.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Acked-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Tested-by: NAC <achirvasub@gmail.com>
Link: https://lkml.kernel.org/r/YCCIgMHkzh/xT4ex@arch-chirva.localdomainSigned-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.17
commit 880b1c2164d1ac7b6fb4d77ad882d53ae8e1d1ab
bugzilla: 48169

--------------------------------

[ Upstream commit f852c596 ]

The sdebug_q_arr pointer must be freed when the module is unloaded.

$ cat /sys/kernel/debug/kmemleak
unreferenced object 0xffff888e1cfb0000 (size 4096):
  comm "modprobe", pid 165555, jiffies 4325987516 (age 685.194s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000458f4f5d>] 0xffffffffc06702d9
    [<000000003edc4b1f>] do_one_initcall+0xe9/0x57d
    [<00000000da7d518c>] do_init_module+0x1d1/0x6f0
    [<000000009a6a9248>] load_module+0x36bd/0x4f50
    [<00000000ddb0c3ce>] __do_sys_init_module+0x1db/0x260
    [<000000009532db57>] do_syscall_64+0xa5/0x420
    [<000000002916b13d>] entry_SYSCALL_64_after_hwframe+0x6a/0xdf

Fixes: 87c715dc ("scsi: scsi_debug: Add per_host_store option")
Link: https://lore.kernel.org/r/20210208111734.34034-1-mlombard@redhat.comAcked-by: NDouglas Gilbert <dgilbert@interlog.com>
Signed-off-by: NMaurizio Lombardi <mlombard@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.17
commit d519197b48c13d7a50fd27966b235f16574aed47
bugzilla: 48169

--------------------------------

[ Upstream commit 07998281 ]

The origin skip check needs to re-test the zone. Else, we might skip
a colliding tuple in the reply direction.

This only occurs when using 'directional zones' where origin tuples
reside in different zones but the reply tuples share the same zone.

This causes the new conntrack entry to be dropped at confirmation time
because NAT clash resolution was elided.

Fixes: 4e35c1cb ("netfilter: nf_nat: skip nat clash resolution for same-origin entries")
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.17
commit 4067ace5f119624aeb91c51e8cbb29ac9fa2150d
bugzilla: 48169

--------------------------------

[ Upstream commit ef66a1ea ]

Normally we clear the failover_pending flag when processing the reset.
But if we are unable to schedule a failover reset we must clear the
flag ourselves. We could fail to schedule the reset if we are in PROBING
state (eg: when booting via kexec) or because we could not allocate memory.

Thanks to Cris Forno for helping isolate the problem and for testing.

Fixes: 1d850493 ("powerpc/vnic: Extend "failover pending" window")
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.ibm.com>
Tested-by: NCristobal Forno <cforno12@linux.ibm.com>
Link: https://lore.kernel.org/r/20210203050802.680772-1-sukadev@linux.ibm.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.17
commit 284abe15c17e5f440b01a46f61948d3fa6b767a1
bugzilla: 48169

--------------------------------

[ Upstream commit f317e2ea ]

When disable CBS, mode_to_use parameter is not updated even the operation
mode of Tx Queue is changed to Data Centre Bridging (DCB). Therefore,
when tc_setup_cbs() function is called to re-enable CBS, the operation
mode of Tx Queue remains at DCB, which causing CBS fails to work.

This patch updates the value of mode_to_use parameter to MTL_QUEUE_DCB
after operation mode of Tx Queue is changed to DCB in stmmac_dma_qmode()
callback function.

Fixes: 1f705bc6 ("net: stmmac: Add support for CBS QDISC")
Suggested-by: NVinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: NMohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Signed-off-by: NSong, Yoong Siang <yoong.siang.song@intel.com>
Reviewed-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: NVinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://lore.kernel.org/r/1612447396-20351-1-git-send-email-yoong.siang.song@intel.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.17
commit 25c312214d9f7b0876892b5997a167c0a9a21c7d
bugzilla: 48169

--------------------------------

[ Upstream commit 647b8dd5 ]

PACKET_TX_TIMESTAMP is defined in if_packet.h but it is not included in
test. Include it instead of <netpacket/packet.h> otherwise the error of
redefinition arrives.
Also fix the compiler warning about ambiguous control flow by adding
explicit braces.

Fixes: 8fe2f761 ("net-timestamp: expand documentation")
Suggested-by: NWillem de Bruijn <willemdebruijn.kernel@gmail.com>
Signed-off-by: NVadim Fedorenko <vfedorenko@novek.ru>
Acked-by: NWillem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/1612461034-24524-1-git-send-email-vfedorenko@novek.ruSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.17
commit 5ed60a17d4668002c21f207d4a91900607c9cbfa
bugzilla: 48169

--------------------------------

[ Upstream commit 07bf34a5 ]

Michael tried to enable Advanced Error Reporting through the ENETC's
Root Complex Event Collector, and the system started spitting out single
bit correctable ECC errors coming from the ENETC interfaces:

pcieport 0000:00:1f.0: AER: Multiple Corrected error received: 0000:00:00.0
fsl_enetc 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Transaction Layer, (Receiver ID)
fsl_enetc 0000:00:00.0:   device [1957:e100] error status/mask=00004000/00000000
fsl_enetc 0000:00:00.0:    [14] CorrIntErr
fsl_enetc 0000:00:00.1: PCIe Bus Error: severity=Corrected, type=Transaction Layer, (Receiver ID)
fsl_enetc 0000:00:00.1:   device [1957:e100] error status/mask=00004000/00000000
fsl_enetc 0000:00:00.1:    [14] CorrIntErr

Further investigating the port correctable memory error detect register
(PCMEDR) shows that these AER errors have an associated SOURCE_ID of 6
(RFS/RSS):

$ devmem 0x1f8010e10 32
0xC0000006
$ devmem 0x1f8050e10 32
0xC0000006

Discussion with the hardware design engineers reveals that on LS1028A,
the hardware does not do initialization of that RFS/RSS memory, and that
software should clear/initialize the entire table before starting to
operate. That comes as a bit of a surprise, since the driver does not do
initialization of the RFS memory. Also, the initialization of the
Receive Side Scaling is done only partially.

Even though the entire ENETC IP has a single shared flow steering
memory, the flow steering service should returns matches only for TCAM
entries that are within the range of the Station Interface that is doing
the search. Therefore, it should be sufficient for a Station Interface
to initialize all of its own entries in order to avoid any ECC errors,
and only the Station Interfaces in use should need initialization.

There are Physical Station Interfaces associated with PCIe PFs and
Virtual Station Interfaces associated with PCIe VFs. We let the PF
driver initialize the entire port's memory, which includes the RFS
entries which are going to be used by the VF.
Reported-by: NMichael Walle <michael@walle.cc>
Fixes: d4fd0404 ("enetc: Introduce basic PF and VF ENETC ethernet drivers")
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: NMichael Walle <michael@walle.cc>
Reviewed-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Link: https://lore.kernel.org/r/20210204134511.2640309-1-vladimir.oltean@nxp.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>