Pull AFS fixes from David Howells:
 "Two fix patches for the AFS filesystem:

   - Fix the refcounting on permit caching.

   - AFS inode (afs_vnode) fields need resetting after allocation
     because they're only initialised when slab pages are obtained from
     the page allocator"

* tag 'afs-fixes-20171201' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  afs: Properly reset afs_vnode (inode) fields
  afs: Fix permit refcounting

Pull MMC fixes from Ulf Hansson:
 "MMC core:
   - Ensure that debugfs files are removed properly
   - Fix missing blk_put_request()
   - Deal with errors from blk_get_request()
   - Rewind mmc bus suspend operations at failures
   - Prepend '0x' to ocr and pre_eol_info in sysfs to identify as hex

  MMC host:
   - sdhci-msm: Make it optional to wait for signal level changes
   - sdhci: Avoid swiotlb buffer being full"

* tag 'mmc-v4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: core: prepend 0x to OCR entry in sysfs
  mmc: core: prepend 0x to pre_eol_info entry in sysfs
  mmc: sdhci: Avoid swiotlb buffer being full
  mmc: sdhci-msm: Optionally wait for signal level changes
  mmc: block: Ensure that debugfs files are removed
  mmc: core: Do not leave the block driver in a suspended state
  mmc: block: Check return value of blk_get_request()
  mmc: block: Fix missing blk_put_request()

Pull drm fixes and cleanups from Dave Airlie:
 "The main thing are a bunch of fixes for the new amd display code, a
  bunch of smatch fixes.

  core:
   - Atomic helper regression fix.
   - Deferred fbdev fallout regression fix.

  amdgpu:
   - New display code (dc) dpms, suspend/resume and smatch fixes, along
     with some others
   - Some regression fixes for amdkfd/radeon.
   - Fix a ttm regression for swiotlb disabled

  bridge:
   - A bunch of fixes for the tc358767 bridge

  mali-dp + hdlcd:
   - some fixes and internal API catchups.

  imx-drm:
   -regression fix in atomic code.

  omapdrm:
   - platform detection regression fixes"

* tag 'drm-fixes-for-v4.15-rc2' of git://people.freedesktop.org/~airlied/linux: (76 commits)
  drm/imx: always call wait_for_flip_done in commit_tail
  omapdrm: hdmi4_cec: signedness bug in hdmi4_cec_init()
  drm: omapdrm: Fix DPI on platforms using the DSI VDDS
  omapdrm: hdmi4: Correct the SoC revision matching
  drm/omap: displays: panel-dpi: add backlight dependency
  drm/omap: Fix error handling path in 'omap_dmm_probe()'
  drm/i915: Disable THP until we have a GPU read BW W/A
  drm/bridge: tc358767: fix 1-lane behavior
  drm/bridge: tc358767: fix AUXDATAn registers access
  drm/bridge: tc358767: fix timing calculations
  drm/bridge: tc358767: fix DP0_MISC register set
  drm/bridge: tc358767: filter out too high modes
  drm/bridge: tc358767: do no fail on hi-res displays
  drm/bridge: Fix lvds-encoder since the panel_bridge rework.
  drm/bridge: synopsys/dw-hdmi: Enable cec clock
  drm/bridge: adv7511/33: Fix adv7511_cec_init() failure handling
  drm/radeon: remove init of CIK VMIDs 8-16 for amdkfd
  drm/ttm: fix populate_and_map() functions once more
  drm/fb_helper: Disable all crtc's when initial setup fails.
  drm/atomic: make drm_atomic_helper_wait_for_vblanks more agressive
  ...

Pull block fixes from Jens Axboe:
 "A selection of fixes/changes that should make it into this series.
  This contains:

   - NVMe, two merges, containing:
        - pci-e, rdma, and fc fixes
        - Device quirks

   - Fix for a badblocks leak in null_blk

   - bcache fix from Rui Hua for a race condition regression where
     -EINTR was returned to upper layers that didn't expect it.

   - Regression fix for blktrace for a bug introduced in this series.

   - blktrace cleanup for cgroup id.

   - bdi registration error handling.

   - Small series with cleanups for blk-wbt.

   - Various little fixes for typos and the like.

  Nothing earth shattering, most important are the NVMe and bcache fixes"

* 'for-linus' of git://git.kernel.dk/linux-block: (34 commits)
  nvme-pci: fix NULL pointer dereference in nvme_free_host_mem()
  nvme-rdma: fix memory leak during queue allocation
  blktrace: fix trace mutex deadlock
  nvme-rdma: Use mr pool
  nvme-rdma: Check remotely invalidated rkey matches our expected rkey
  nvme-rdma: wait for local invalidation before completing a request
  nvme-rdma: don't complete requests before a send work request has completed
  nvme-rdma: don't suppress send completions
  bcache: check return value of register_shrinker
  bcache: recover data from backing when data is clean
  bcache: Fix building error on MIPS
  bcache: add a comment in journal bucket reading
  nvme-fc: don't use bit masks for set/test_bit() numbers
  blk-wbt: fix comments typo
  blk-wbt: move wbt_clear_stat to common place in wbt_done
  blk-sysfs: remove NULL pointer checking in queue_wb_lat_store
  blk-wbt: remove duplicated setting in wbt_init
  nvme-pci: add quirk for delay before CHK RDY for WDC SN200
  block: remove useless assignment in bio_split
  null_blk: fix dev->badblocks leak
  ...

When an AFS inode is allocated by afs_alloc_inode(), the allocated
afs_vnode struct isn't necessarily reset from the last time it was used as
an inode because the slab constructor is only invoked once when the memory
is obtained from the page allocator.

This means that information can leak from one inode to the next because
we're not calling kmem_cache_zalloc().  Some of the information isn't
reset, in particular the permit cache pointer.

Bring the clearances up to date.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Tested-by: NMarc Dionne <marc.dionne@auristor.com>

Fix four refcount bugs in afs_cache_permit():

 (1) When checking the result of the kzalloc(), we can't just return, but
     must put 'permits'.

 (2) We shouldn't put permits immediately after hashing a new permit as we
     need to keep the pointer stable so that we can check to see if
     vnode->permit_cache has changed before we decide whether to assign to
     it.

 (3) 'permits' is being put twice.

 (4) We need to put either the replacement or the thing replaced after the
     assignment to vnode->permit_cache.

Without this, lots of the following are seen:

  Kernel BUG at ffffffffa039857b [verbose debug info unavailable]
  ------------[ cut here ]------------
  Kernel BUG at ffffffffa039858a [verbose debug info unavailable]
  ------------[ cut here ]------------

The addresses are in the .text..refcount section of the kafs.ko module.
Following the relocation records for the __ex_table section shows one to be
due to the decrement in afs_put_permits() and the other to be key_get() in
afs_cache_permit().

Occasionally, the following is seen:

  refcount_t overflow at afs_cache_permit+0x57d/0x5c0 [kafs] in cc1[562], uid/euid: 0/0
  WARNING: CPU: 0 PID: 562 at kernel/panic.c:657 refcount_error_report+0x9c/0xac
  ...
Reported-by: NMarc Dionne <marc.dionne@auristor.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Tested-by: NMarc Dionne <marc.dionne@auristor.com>

Merge tag 'apparmor-pr-2017-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor

Pull apparmor bugfix from John Johansen:
 "Fix oops in audit_signal_cb hook marked for stable"

* tag 'apparmor-pr-2017-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
  apparmor: fix oops in audit_signal_cb hook

Pull ACPI fixes from Rafael Wysocki:
 "These fix a regression related to the ACPI EC handling during system
  suspend/resume on some platforms and prevent modalias from being
  exposed to user space for ACPI device object with "not functional and
  not present" status.

  Specifics:

   - Fix an ACPI EC driver regression (from the 4.9 cycle) causing the
     driver's power management operations to be omitted during system
     suspend/resume on platforms where the EC instance from the ECDT
     table is used instead of the one from the DSDT (Lv Zheng).

   - Prevent modalias from being exposed to user space for ACPI device
     objects with _STA returning 0 (not present and not functional) to
     prevent driver modules from being loaded automatically for hardware
     that is not actually present on some platforms (Hans de Goede)"

* tag 'acpi-4.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / EC: Fix regression related to PM ops support in ECDT device
  ACPI / bus: Leave modalias empty for devices which are not present

Pull power management fixes from Rafael Wysocki:

 - add missing module information to the Mediatek cpufreq driver module
   (Jesse Chan)

 - fix config dependencies for the Loongson cpufreq driver (James Hogan)

 - fix two issues related to CPU offline in the cpupower utility
   (Abhishek Goel).

* tag 'pm-4.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: mediatek: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE
  cpufreq: Add Loongson machine dependencies
  cpupower : Fix cpupower working when cpu0 is offline
  cpupowerutils: bench - Fix cpu online check

Pull quota & reiserfs changes from Jan Kara:

 - two error checking improvements for quota

 - remove bogus i_version increase for reiserfs

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  quota: Check for register_shrinker() failure.
  quota: propagate error from __dquot_initialize
  reiserfs: remove unneeded i_version bump

Fixes for 4.15.  Highlights:
- DC fixes for S3, gamma, audio, pageflipping, etc.
- fix a regression in radeon from kfd removal
- fix a ttm regression with swiotlb disabled
- misc other fixes

* 'drm-fixes-4.15' of git://people.freedesktop.org/~agd5f/linux: (36 commits)
  drm/radeon: remove init of CIK VMIDs 8-16 for amdkfd
  drm/ttm: fix populate_and_map() functions once more
  drm/amd/display: USB-C / thunderbolt dock specific workaround
  drm/amd/display: Switch to drm_atomic_helper_wait_for_flip_done
  drm/amd/display: fix gamma setting
  drm/amd/display: Do not put drm_atomic_state on resume
  drm/amd/display: Fix couple more inconsistent NULL checks in dc_resource
  drm/amd/display: Fix potential NULL and mem leak in create_links
  drm/amd/display: Fix hubp check in set_cursor_position
  drm/amd/display: Fix use before NULL check in validate_timing
  drm/amd/display: Bunch of smatch error and warning fixes in DC
  drm/amd/display: Fix amdgpu_dm bugs found by smatch
  drm/amd/display: try to find matching audio inst for enc inst first
  drm/amd/display: fix seq issue: turn on clock before programming afmt.
  drm/amd/display: fix memory leaks on error exit return
  drm/amd/display: check plane state before validating fbc
  drm/amd/display: Do DC mode-change check when adding CRTCs
  drm/amd/display: Revert noisy assert messages
  drm/amd/display: fix split viewport rounding error
  drm/amd/display: Check aux channel before MST resume
  ...

mali-dp interface cleanups.

* 'for-upstream/mali-dp' of git://linux-arm.org/linux-ld:
  drm: mali-dp: Disable planes when their CRTC gets disabled.
  drm: mali-dp: Separate static internal data into a read-only structure.
  drm/arm: Replace instances of drm_dev_unref with drm_dev_put.
  drm: mali-dp: switch to drm_*_get(), drm_*_put() helpers

Merge tag 'drm-amdkfd-fixes-2017-11-26' of git://people.freedesktop.org/~gabbayo/linux into drm-fixes

This is amdkfd pull request for -rc2. It contains three small fixes to the
CIK SDMA code, compilation error fix in kfd_ioctl.h and fix to accessing
a pointer after it was released.

* tag 'drm-amdkfd-fixes-2017-11-26' of git://people.freedesktop.org/~gabbayo/linux:
  uapi: fix linux/kfd_ioctl.h userspace compilation errors
  drm/amdkfd: fix amdkfd use-after-free GP fault
  drm/amdkfd: Fix SDMA oversubsription handling
  drm/amdkfd: Fix SDMA ring buffer size calculation
  drm/amdgpu: Fix SDMA load/unload sequence on HWS disabled mode

3 hdlcd fixes/cleanups

* 'for-upstream/hdlcd' of git://linux-arm.org/linux-ld:
  drm/arm: Replace instances of drm_dev_unref with drm_dev_put.
  drm: Fix checkpatch issue: "WARNING: braces {} are not necessary for single statement blocks."
  drm: hdlcd: Update PM code to save/restore console.

drm/imx: fix commit_tail for new drm_atomic_helper_setup_commit

Since commit 080de2e5 ("drm/atomic: Check for busy planes/connectors before
setting the commit"), drm_atomic_helper_setup_commit expects that blocking
commits have completed flipping before the commit_tail returns. Add the missing
wait_for_flip_done to commit_tail to ensure this.

* tag 'imx-drm-fixes-2017-11-30' of git://git.pengutronix.de/git/pza/linux:
  drm/imx: always call wait_for_flip_done in commit_tail

Merge tag 'drm-intel-fixes-2017-11-30' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Disable transparent huge pages for now until we have a W/A
- Building fix when CONFIG_BACKLIGHT_CLASS_DEVICE is not selected
- GMBUS communication robustness
- Fbdev hotplug handling fix

gvt-fixes-2017-11-28

- regression fix for sane request alloc (Fred)
- locking fix (Changbin)
- fix invalid addr mask (Xiong)
- compression regression fix (Weinan)
- fix default pipe enable for virtual display (Xiaolin)

* tag 'drm-intel-fixes-2017-11-30' of git://anongit.freedesktop.org/drm/drm-intel:
  drm/i915: Disable THP until we have a GPU read BW W/A
  drm/i915/gvt: Correct ADDR_4K/2M/1G_MASK definition
  drm/i915/gvt: enabled pipe A default on creating vgpu
  drm/i915/gvt: Move request alloc to dispatch_workload path only
  drm/i915/gvt: remove skl_misc_ctl_write handler
  drm/i915/gvt: Fix unsafe locking caused by spin_unlock_bh
  drm/i915: fix intel_backlight_device_register declaration
  drm/i915/fbdev: Serialise early hotplug events with async fbdev config
  drm/i915: Prevent zero length "index" write
  drm/i915: Don't try indexed reads to alternate slave addresses

Merge tag 'omapdrm-4.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-fixes

omapdrm fixes for 4.15

* Fix platform detection issue causing OMAP3 DPI output to have missing color bits
* Fix platform detection issue causing OMAP4 HDMI audio not to work

* tag 'omapdrm-4.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
  omapdrm: hdmi4_cec: signedness bug in hdmi4_cec_init()
  drm: omapdrm: Fix DPI on platforms using the DSI VDDS
  omapdrm: hdmi4: Correct the SoC revision matching
  drm/omap: displays: panel-dpi: add backlight dependency
  drm/omap: Fix error handling path in 'omap_dmm_probe()'

drm-misc-fixes for -rc2

- big pile of bridge driver (mostly tc358767), all handled by Archit
  and Andrez
- rockchip dsi fix
- atomic helper regression fix for spurious -EBUSY (Maarten)
- fix deferred fbdev fallout (Maarten)

* tag 'drm-misc-fixes-2017-11-30' of git://anongit.freedesktop.org/drm/drm-misc:
  drm/bridge: tc358767: fix 1-lane behavior
  drm/bridge: tc358767: fix AUXDATAn registers access
  drm/bridge: tc358767: fix timing calculations
  drm/bridge: tc358767: fix DP0_MISC register set
  drm/bridge: tc358767: filter out too high modes
  drm/bridge: tc358767: do no fail on hi-res displays
  drm/bridge: Fix lvds-encoder since the panel_bridge rework.
  drm/bridge: synopsys/dw-hdmi: Enable cec clock
  drm/bridge: adv7511/33: Fix adv7511_cec_init() failure handling
  drm/fb_helper: Disable all crtc's when initial setup fails.
  drm/atomic: make drm_atomic_helper_wait_for_vblanks more agressive
  drm/rockchip: dw-mipi-dsi: fix possible un-balanced runtime PM enable

Pull KVM fixes from Paolo Bonzini:

 - x86 bugfixes: APIC, nested virtualization, IOAPIC

 - PPC bugfix: HPT guests on a POWER9 radix host

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (26 commits)
  KVM: Let KVM_SET_SIGNAL_MASK work as advertised
  KVM: VMX: Fix vmx->nested freeing when no SMI handler
  KVM: VMX: Fix rflags cache during vCPU reset
  KVM: X86: Fix softlockup when get the current kvmclock
  KVM: lapic: Fixup LDR on load in x2apic
  KVM: lapic: Split out x2apic ldr calculation
  KVM: PPC: Book3S HV: Fix migration and HPT resizing of HPT guests on radix hosts
  KVM: vmx: use X86_CR4_UMIP and X86_FEATURE_UMIP
  KVM: x86: Fix CPUID function for word 6 (80000001_ECX)
  KVM: nVMX: Fix vmx_check_nested_events() return value in case an event was reinjected to L2
  KVM: x86: ioapic: Preserve read-only values in the redirection table
  KVM: x86: ioapic: Clear Remote IRR when entry is switched to edge-triggered
  KVM: x86: ioapic: Remove redundant check for Remote IRR in ioapic_set_irq
  KVM: x86: ioapic: Don't fire level irq when Remote IRR set
  KVM: x86: ioapic: Fix level-triggered EOI and IOAPIC reconfigure race
  KVM: x86: inject exceptions produced by x86_decode_insn
  KVM: x86: Allow suppressing prints on RDMSR/WRMSR of unhandled MSRs
  KVM: x86: fix em_fxstor() sleeping while in atomic
  KVM: nVMX: Fix mmu context after VMLAUNCH/VMRESUME failure
  KVM: nVMX: Validate the IA32_BNDCFGS on nested VM-entry
  ...

Pull s390 fixes from Martin Schwidefsky:

 - SPDX identifiers are added to more of the s390 specific files.

 - The ELF_ET_DYN_BASE base patch from Kees is reverted, with the change
   some old 31-bit programs crash.

 - Bug fixes and cleanups.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (29 commits)
  s390/gs: add compat regset for the guarded storage broadcast control block
  s390: revert ELF_ET_DYN_BASE base changes
  s390: Remove redundant license text
  s390: crypto: Remove redundant license text
  s390: include: Remove redundant license text
  s390: kernel: Remove redundant license text
  s390: add SPDX identifiers to the remaining files
  s390: appldata: add SPDX identifiers to the remaining files
  s390: pci: add SPDX identifiers to the remaining files
  s390: mm: add SPDX identifiers to the remaining files
  s390: crypto: add SPDX identifiers to the remaining files
  s390: kernel: add SPDX identifiers to the remaining files
  s390: sthyi: add SPDX identifiers to the remaining files
  s390: drivers: Remove redundant license text
  s390: crypto: Remove redundant license text
  s390: virtio: add SPDX identifiers to the remaining files
  s390: scsi: zfcp_aux: add SPDX identifier
  s390: net: add SPDX identifiers to the remaining files
  s390: char: add SPDX identifiers to the remaining files
  s390: cio: add SPDX identifiers to the remaining files
  ...

drm_atomic_helper_wait_for_vblanks will go away in the future.

The new drm_atomic_helper_setup_commit in 4.15 expects that blocking commits
have completed flipping before the commit_tail returns. This must be ensured
by calling wait_for_vblanks or wait_for_flip_done, where flip_done might do
a less agressive wait, which is fine for imx-drm.

Fixes: 080de2e5 (drm/atomic: Check for busy planes/connectors before
                     setting the commit)
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>

* acpi-ec:
  ACPI / EC: Fix regression related to PM ops support in ECDT device

* pm-tools:
  cpupower : Fix cpupower working when cpu0 is offline
  cpupowerutils: bench - Fix cpu online check

"ret" needs to be signed for the error handling to work.

Fixes: 8d7f934d ("omapdrm: hdmi4_cec: add OMAP4 HDMI CEC support")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Commit d178e034 ("drm: omapdrm: Move FEAT_DPI_USES_VDDS_DSI feature
to dpi code") replaced usage of platform data version with SoC matching
to configure DPI VDDS. The SoC match entries were incorrect, they should
have matched on the machine name instead of the SoC family. Fix it.

The result was observed on OpenPandora with OMAP3530 where the panel only
had the Blue channel and Red&Green were missing. It was not observed on
GTA04 with DM3730.

Fixes: d178e034 ("drm: omapdrm: Move FEAT_DPI_USES_VDDS_DSI feature to dpi code")
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reported-by: NH. Nikolaus Schaller <hns@goldelico.com>
Tested-by: NH. Nikolaus Schaller <hns@goldelico.com>
Cc: stable@vger.kernel.org # 4.14
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

I believe the intention of the commit 2c9fc9bf
("drm: omapdrm: Move FEAT_HDMI_* features to hdmi4 driver")
was to identify omap4430 ES1.x, omap4430 ES2.x and other OMAP4 revisions,
like omap4460.

By using family=OMAP4 in the match the code will treat omap4460 ES1.x in a
same way as it would treat omap4430 ES1.x

This breaks HDMI audio on OMAP4460 devices (PandaES for example).

Correct the match rule so we are not going to get false positive match.

Fixes: 2c9fc9bf ("drm: omapdrm: Move FEAT_HDMI_* features to hdmi4 driver")

Cc: stable@vger.kernel.org # 4.14
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The new backlight code causes a link failure when backlight
support itself is disabled:

drivers/gpu/drm/omapdrm/displays/panel-dpi.o: In function `panel_dpi_probe_of':
panel-dpi.c:(.text+0x35c): undefined reference to `of_find_backlight_by_node'

This adds a Kconfig dependency like we have for the other OMAP
display targets.

Fixes: 39135a30 ("drm/omap: displays: panel-dpi: Support for handling backlight devices")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

If we don't find a matching device node, we must free the memory allocated
in 'omap_dmm' a few lines above.

Fixes: 7cb0d6c1 ("drm/omap: fix TILER on OMAP5")
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

We seem to be missing some W/A for 2M pages and are getting
a hit on raw GPU read bandwidths (even 30%) even though the
GPU write bandwidths improve (even 10%).

For now, disable THP, which is our only practical source of
2M pages until we have a W/A for the issue.

v2:
- Be explicit that we talk about GPU bandwidths (Eero)
- s/deny/never/ because that's why (Chris)
Reported-by: NValtteri Rantala <valtteri.rantala@intel.com>
Fixes: b901bb89 ("drm/i915/gemfs: enable THP")
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Valtteri Rantala <valtteri.rantala@intel.com>
Cc: Eero Tamminen <eero.t.tamminen@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Tested-by: NValtteri Rantala <valtteri.rantala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171127091233.7001-1-joonas.lahtinen@linux.intel.com
(cherry picked from commit 9987da4b)
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

Use drm_dp_channel_eq_ok helper
Acked-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NAndrey Gusakov <andrey.gusakov@cogentembedded.com>
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510073785-16108-7-git-send-email-andrey.gusakov@cogentembedded.com

First four bytes should go to DP0_AUXWDATA0. Due to bug if
len > 4 first four bytes was writen to DP0_AUXWDATA1 and all
data get shifted by 4 bytes. Fix it.
Acked-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NAndrey Gusakov <andrey.gusakov@cogentembedded.com>
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510073785-16108-6-git-send-email-andrey.gusakov@cogentembedded.com

Fields in HTIM01 and HTIM02 regs should be even.
Recomended thresh_dly value is max_tu_symbol.
Remove set of VPCTRL0.VSDELAY as it is related to DSI input
interface. Currently driver supports only DPI.
Acked-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NAndrey Gusakov <andrey.gusakov@cogentembedded.com>
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510073785-16108-5-git-send-email-andrey.gusakov@cogentembedded.com

Remove shift from TU_SIZE_RECOMMENDED define as it used to
calculate max_tu_symbols.
Acked-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NAndrey Gusakov <andrey.gusakov@cogentembedded.com>
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510073785-16108-4-git-send-email-andrey.gusakov@cogentembedded.com

Pixel clock limitation for DPI is 154 MHz. Do not accept modes
with higher pixel clock rate.
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NAndrey Gusakov <andrey.gusakov@cogentembedded.com>
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510073785-16108-3-git-send-email-andrey.gusakov@cogentembedded.com

Do not fail data rates higher than 2.7 and more than 2 lanes.
Try to fall back to 2.7Gbps and 2 lanes.
Acked-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NAndrey Gusakov <andrey.gusakov@cogentembedded.com>
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510073785-16108-2-git-send-email-andrey.gusakov@cogentembedded.com

The panel_bridge bridge attaches to the panel's OF node, not the
lvds-encoder's node.  Put in a little no-op bridge of our own so that
our consumers can still find a bridge where they expect.

This also fixes an unintended unregistration and leak of the
panel-bridge on module remove.
Signed-off-by: NEric Anholt <eric@anholt.net>
Fixes: 13dfc054 ("drm/bridge: Refactor out the panel wrapper from the lvds-encoder bri
dge.")
Tested-by: NLothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114191647.22207-1-eric@anholt.net

Support the "cec" optional clock. The documentation already mentions "cec"
optional clock and it is used by several boards, but currently the driver
doesn't enable it, thus preventing cec from working on those boards.

And even worse: a /dev/cecX device will appear for those boards, but it
won't be functioning without configuring this clock.

Changes:
v4:
- Change commit message to stress the importance of this patch

v3:
- Drop useless braces

v2:
- Separate ENOENT errors from others
- Propagate other errors (especially -EPROBE_DEFER)
Signed-off-by: NPierre-Hugues Husson <phh@phh.me>
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171125201844.11353-1-phh@phh.me

If the device tree for a board did not specify a cec clock, then
adv7511_cec_init would return an error, which would cause adv7511_probe()
to fail and thus there is no HDMI output.

There is no need to have adv7511_probe() fail if the CEC initialization
fails, so just change adv7511_cec_init() to a void function. In addition,
adv7511_cec_init() should just return silently if the cec clock isn't
found and show a message for any other errors.

An otherwise correct cleanup patch from Dan Carpenter turned this broken
failure handling into a kernel Oops, so bisection points to commit
7af35b0a ("drm/kirin: Checking for IS_ERR() instead of NULL") rather
than 3b1b9750 ("drm: adv7511/33: add HDMI CEC support").

Based on earlier patches from Arnd and John.
Reported-by: NNaresh Kamboju <naresh.kamboju@linaro.org>
Cc: Xinliang Liu <xinliang.liu@linaro.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: John Stultz <john.stultz@linaro.org>
Link: https://bugs.linaro.org/show_bug.cgi?id=3345
Link: https://lkft.validation.linaro.org/scheduler/job/48017#L3551
Fixes: 7af35b0a ("drm/kirin: Checking for IS_ERR() instead of NULL")
Fixes: 3b1b9750 ("drm: adv7511/33: add HDMI CEC support")
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Tested-by: NHans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: NJohn Stultz <john.stultz@linaro.org>
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/9097b2a4-b6b9-5fca-e039-0a17694b1143@xs4all.nl

Mergr misc fixes from Andrew Morton:
 "28 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (28 commits)
  fs/hugetlbfs/inode.c: change put_page/unlock_page order in hugetlbfs_fallocate()
  mm/hugetlb: fix NULL-pointer dereference on 5-level paging machine
  autofs: revert "autofs: fix AT_NO_AUTOMOUNT not being honored"
  autofs: revert "autofs: take more care to not update last_used on path walk"
  fs/fat/inode.c: fix sb_rdonly() change
  mm, memcg: fix mem_cgroup_swapout() for THPs
  mm: migrate: fix an incorrect call of prep_transhuge_page()
  kmemleak: add scheduling point to kmemleak_scan()
  scripts/bloat-o-meter: don't fail with division by 0
  fs/mbcache.c: make count_objects() more robust
  Revert "mm/page-writeback.c: print a warning if the vm dirtiness settings are illogical"
  mm/madvise.c: fix madvise() infinite loop under special circumstances
  exec: avoid RLIMIT_STACK races with prlimit()
  IB/core: disable memory registration of filesystem-dax vmas
  v4l2: disable filesystem-dax mapping support
  mm: fail get_vaddr_frames() for filesystem-dax mappings
  mm: introduce get_user_pages_longterm
  device-dax: implement ->split() to catch invalid munmap attempts
  mm, hugetlbfs: introduce ->split() to vm_operations_struct
  scripts/faddr2line: extend usage on generic arch
  ...

hugetlfs_fallocate() currently performs put_page() before unlock_page().
This scenario opens a small time window, from the time the page is added
to the page cache, until it is unlocked, in which the page might be
removed from the page-cache by another core.  If the page is removed
during this time windows, it might cause a memory corruption, as the
wrong page will be unlocked.

It is arguable whether this scenario can happen in a real system, and
there are several mitigating factors.  The issue was found by code
inspection (actually grep), and not by actually triggering the flow.
Yet, since putting the page before unlocking is incorrect it should be
fixed, if only to prevent future breakage or someone copy-pasting this
code.

Mike said:
 "I am of the opinion that this does not need to be sent to stable.
  Although the ordering is current code is incorrect, there is no way
  for this to be a problem with current locking. In addition, I verified
  that the perhaps bigger issue with sys_fadvise64(POSIX_FADV_DONTNEED)
  for hugetlbfs and other filesystems is addressed in 3a77d214 ("mm:
  fadvise: avoid fadvise for fs without backing device")"

Link: http://lkml.kernel.org/r/20170826191124.51642-1-namit@vmware.com
Fixes: 70c3547e ("hugetlbfs: add hugetlbfs_fallocate()")
Signed-off-by: NNadav Amit <namit@vmware.com>
Reviewed-by: NMike Kravetz <mike.kravetz@oracle.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>