- 13 6月, 2018 1 次提交
-
-
由 Kees Cook 提交于
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: NKees Cook <keescook@chromium.org>
-
- 07 6月, 2018 1 次提交
-
-
由 Kees Cook 提交于
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = kmalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL); This patch makes the changes for kmalloc()-family (and kvmalloc()-family) uses. It was done via automatic conversion with manual review for the "CHECKME" non-standard cases noted below, using the following Coccinelle script: // pkey_cache = kmalloc(sizeof *pkey_cache + tprops->pkey_tbl_len * // sizeof *pkey_cache->table, GFP_KERNEL); @@ identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc"; expression GFP; identifier VAR, ELEMENT; expression COUNT; @@ - alloc(sizeof(*VAR) + COUNT * sizeof(*VAR->ELEMENT), GFP) + alloc(struct_size(VAR, ELEMENT, COUNT), GFP) // mr = kzalloc(sizeof(*mr) + m * sizeof(mr->map[0]), GFP_KERNEL); @@ identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc"; expression GFP; identifier VAR, ELEMENT; expression COUNT; @@ - alloc(sizeof(*VAR) + COUNT * sizeof(VAR->ELEMENT[0]), GFP) + alloc(struct_size(VAR, ELEMENT, COUNT), GFP) // Same pattern, but can't trivially locate the trailing element name, // or variable name. @@ identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc"; expression GFP; expression SOMETHING, COUNT, ELEMENT; @@ - alloc(sizeof(SOMETHING) + COUNT * sizeof(ELEMENT), GFP) + alloc(CHECKME_struct_size(&SOMETHING, ELEMENT, COUNT), GFP) Signed-off-by: NKees Cook <keescook@chromium.org>
-
- 30 5月, 2018 6 次提交
-
-
由 Johannes Berg 提交于
Initially in this code, the race didn't matter since it didn't do anything. Latest with the commit I marked this as fixing it started to matter as something got done here that needed other data that got freed as soon as the queue notification wait was returning. In the scenario we saw, apparently the IWL_MVM_RXQ_NOTIF_DEL_BA event was sent to all queues, but processing the last event we returned from iwl_mvm_sync_rx_queues_internal() and then from iwl_mvm_free_reorder() and continued some processing before wl_mvm_del_ba() was even invoked on the other CPU. Thus, when the latter finally ran, it found that mvm->baid_map[baid] was no longer valid. Correct the race by moving the counter decrement and wake_up() to be done only after all the per-event processing completed. Note that in the commit I marked as being fixed the wake_up() didn't exist yet (and the code was otherwise problematic) but this particular problem already existed in a way. Fixes: b915c101 ("iwlwifi: mvm: add reorder buffer per queue") Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Emmanuel Grumbach 提交于
A peer can limit the number of subframes it can handle in a single A-MSDU. Honor this limit. Note that the smallest limit is 8, and we are very unlikely to reach that limit. So this isn't really a big deal. Fixes: a6d5e32f ("iwlwifi: mvm: send large SKBs to the transport") Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Gregory Greenman 提交于
Currently, a BA session is opened when the tx traffic exceeds 10 frames per second. As a result of inter-op problems with some APs, add a condition to open BA session only when station is already authorized. Fixes: 482e4844 ("iwlwifi: mvm: change open and close criteria of a BA session") Signed-off-by: NGregory Greenman <gregory.greenman@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Emmanuel Grumbach 提交于
Our hardware has a limited amount of buffer descriptors for each Tx packet. Because of that, there is a short piece of code that makes sure that that we don't push too many subframes in an A-MSDU because of subframes needs 2 buffer descriptors. This code also takes into account the number of fragment of the skb since we also need a buffer descriptor for each fragment in the skb. This piece of code though didn't check that the resulting number of subframes wasn't 0. A user reported that using NFS client, he could get skbs that are so fragmented that the code mentioned above returned 0 for the number of subframes making skb_gso_segment fail and subconsequently iwlwifi would WARN. Fix this by make sure that num_subframes is at least 1. This fixes: https://bugzilla.kernel.org/show_bug.cgi?id=199209 Fixes: a6d5e32f ("iwlwifi: mvm: send large SKBs to the transport") Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Aviya Erenfeld 提交于
Some versions of the FW don't support channel switch in TDLS. Add a condition that checks it. Fixes: 307e4723 ("iwlwifi: mvm: configure TDLS peers to FW") Signed-off-by: NAviya Erenfeld <aviya.erenfeld@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Sara Sharon 提交于
In some cases we may get from FW errored frames with UNKNOWN security type. This may happen in unsecured aggregation flow, where the first packet had a CRC error in the WEP bit, which was followed by a failure to decrypt and was dropped. The next frames in the aggregation "inherit" the bad metadata of the first packet. Make sure to drop such frames since RADA and other offloads will not operate correctly which may have unexpected results. In case of AP it also causes to TX AMSDU frames to the peers, resulting with assert 0x104B. Signed-off-by: NSara Sharon <sara.sharon@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
- 23 5月, 2018 1 次提交
-
-
由 Ilan Peer 提交于
There are specific cases, such as SAE authentication exchange, that might require long duration to complete. For such cases, add support for indicating to the driver the required duration of the prepare_tx() operation, so the driver would still be able to complete the frame exchange. Currently, indicate the duration only for SAE authentication exchange, as SAE authentication can take up to 2000 msec (as defined in IEEE P802.11-REVmd D1.0 p. 3504). As the patch modified the prepare_tx() callback API, also modify the relevant code in iwlwifi. Signed-off-by: NIlan Peer <ilan.peer@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 26 4月, 2018 5 次提交
-
-
由 Eliad Peller 提交于
In case of "any" wowlan trigger is configured, no valid wakeup filter was configured. Moreover, the fw assumes there's no connection when there are no configured wakeup filters. This leads to the station info not being updated on D3 command, causing rate_n_flags to be 0 when the offloading code sends tx frame (triggering SYSASSERT_102C due to invalid antenna param) Note: "any" trigger is currently assumed to only be used when entering d0i3 (which has a different flow). However, we still reach this code when using d3_test. Signed-off-by: NEliad Peller <eliadx.peller@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Sara Sharon 提交于
Firmware will only send non low-latency TIDs in the bitmap, so the check is now redundant. Signed-off-by: NSara Sharon <sara.sharon@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Johannes Berg 提交于
Future changes will require moving the HE radiotap data into the SKB head, but this means we need to have the alignment reservation done before that. To prepare, move the alignment reservation earlier here. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Golan Ben-Ami 提交于
In future devices a new image will be introduced - IML. The IML, image loader, is loaded by the ROM, and as part of the new self-init flow, loads the rest of the firmware images to the device. Store the image, so the ROM can load it to the device. Signed-off-by: NGolan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Golan Ben Ami 提交于
Different device families may have different flag values for passing a message to the fw (i.e. SW_RESET). In order to keep the code readable, and avoid conditioning upon the family, store a value for each flag, which indicates the bit that needs to be enabled. Signed-off-by: NGolan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
- 20 4月, 2018 16 次提交
-
-
由 Liad Kaufman 提交于
When trying to open aggregations on 22000 HW before traffic had actually passed, the driver will discover it is missing a queue to aggregate on. In such a case - allocate a queue. Signed-off-by: NLiad Kaufman <liad.kaufman@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Shaul Triebitz 提交于
There's already an opmode common file for nvm iwl-nvm-parse.c Move the content of fw/nvm.c to iwl-nvm-parse.c and delete fw/nvm.c. Signed-off-by: NShaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Naftali Goldstein 提交于
Update rs-fw API to match changes in FW. Specifically, the TLC_MNG_NOTIF_REQ_CMD command and TLC_MNG_AMSDU_ENABLE_NOTIF notification are removed, the A-MSDU related info is received from FW via the TLC_MNG_UPDATE_NOTIF, and the TLC_MNG_CONFIG_CMD uses version 2 of its data structure. Additionally, constify some arguments in a couple of functions. Signed-off-by: NNaftali Goldstein <naftali.goldstein@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Emmanuel Grumbach 提交于
22000 devices rely on this flag to install the key to the right queues. For earlier devices we didn't have a key / queue mapping and the key was sent along with the Tx command for each Tx hence the problem didn't arise. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Sara Sharon 提交于
This saves some typing and is overall more readable. Signed-off-by: NSara Sharon <sara.sharon@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Shaul Triebitz 提交于
Move all the NVM file handling code to iwl-nvm-parse.c where all this stuff belongs. This cleans up the MVM specific code and allows easier reuse by other opmodes if needed. Signed-off-by: NShaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Sara Sharon 提交于
In 22000 devices, aka gen2, the TFS is 256 bytes. In order to save memory, use shorter TX queue for aux and mgmt queues, since there isn't much traffic on them. Signed-off-by: NSara Sharon <sara.sharon@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Sara Sharon 提交于
As preparation for dynamic queue sizing, add a parameter of the TX queue size to the dynamic queue allocation op mode API. Signed-off-by: NSara Sharon <sara.sharon@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Gregory Greenman 提交于
Support the new APIs and activate AMSDU based on the offloaded TLC decisions. Signed-off-by: NSara Sharon <sara.sharon@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Luca Coelho 提交于
The code that sets the correct out-of-channel priority depending on the scan type was accidentally removed during a rebase. Add it back. Fixes: c1a75153 ("iwlwifi: mvm: add adaptive dwell support") Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Johannes Berg 提交于
Introduce and use iwl_mvm_cdb_scan_api(), which checks the family. Most of this will go away once the 22000 firmware supports adaptive dwell, after which the V6 scan API won't be used, but the V3 scan *config* API will still need to be distinguished. In any case, this gets rid of the completely bogus has_new_tx_api() checks. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Sara Sharon 提交于
Detect low latency and traffic load per band. Add support for deciding on scan type and timings per band. Signed-off-by: NSara Sharon <sara.sharon@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Johannes Berg 提交于
Try to detect that the AP is not using aggregation even when there's enough traffic to make it worthwhile; if this is the case and U-APSD is enabled then assume the AP is broken (like so many) and doesn't enable aggregation when U-APSD is used. In this case, disconnect from the AP and blacklist U-APSD for a potential new connection to it. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Emmanuel Grumbach 提交于
The primary channel is the channel that will be untouched by BT. The secondary channel might be touched by BT. Hence, we want the primary to be the most active channel. To do so, use the TCM infrastructure. Since the BT keeps sending notifications, we can rely on them to trigger the check. Every 10 seconds, we will check what is the most active context and chose the right primary. We need to wait 10 seconds before we modify the settings because frequent changes in these settings can confuse BT. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Luca Coelho 提交于
The code for changing the scan priority is already implemented, but isn't yet in use. Now that TCM data is available, we can base the scan priority decision on the traffic load. Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Luca Coelho 提交于
Traffic condition monitor gathers data about the traffic load and other conditions and can be used to make decisions regarding latency, throughput etc. This patch introduces the code and data structures to collect this data for future use. Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
- 09 4月, 2018 1 次提交
-
-
由 Haim Dreyfuss 提交于
Since our device is regulatory self managed it maintains its regulatory rules by its own. However the wmm_rules values can't be set by the device itself but only the indication about the need to set it. In case the device set wmm indication, proactively query the regulatory data base to get these values Signed-off-by: NHaim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
- 29 3月, 2018 6 次提交
-
-
由 Alexei Starovoitov 提交于
fix iwlwifi_dev_ucode_error tracepoint to pass pointer to a table instead of all 17 arguments by value. dvm/main.c and mvm/utils.c have 'struct iwl_error_event_table' defined with very similar yet subtly different fields and offsets. tracepoint is still common and using definition of 'struct iwl_error_event_table' from dvm/commands.h while copying fields. Long term this tracepoint probably should be split into two. Signed-off-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 Sara Sharon 提交于
Currently we have a boolean variable for each cause. This costs space, and requires to check each separately when determining low latency. Since we have another cause incoming, convert it to an enum. While at it, move the retrieval of the prev value and the assignment of the new value to be inside iwl_mvm_update_low_latency and save the need for each caller to do it separately. Signed-off-by: NSara Sharon <sara.sharon@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Ayala Beker 提交于
Remove fragmented_dwell_time and add num_of_fragments to support the new API version. Signed-off-by: NAyala Beker <ayala.beker@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Ilan Peer 提交于
The FW does not allocate quota air time for the binding of a station MAC before iwlmvm indicates that it is associated. Currently iwlmvm indicates that the MAC is associated only after hearing a beacon from the AP. In case a deauthentication frame is sent before the MAC is associated, the frame might not be sent as the corresponding binding is not scheduled. To handle such cases, set IEEE80211_HW_DEAUTH_NEED_MGD_TX_PREP in the HW flags, requesting mac80211 to call the mgd_prepare_tx() callback before transmitting a deauthentication frame if associated but no beacon was heard from the AP. In addition, do not warn in iwl_mvm_mac_mgd_prepare_tx() when already associated as now the callback can be called also when associated. Signed-off-by: NIlan Peer <ilan.peer@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Zamir, Roee 提交于
Add support for Optimized Connectivity Experience (OCE). Get capabilities from the fw, expose them with nl80211, and enable them in UMAC scan if the relevant nl80211 flags are set by the userspace. Signed-off-by: NRoee Zamir <roee.zamir@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Zamir, Roee 提交于
Update the scan command API with support for adaptive dwell. Adaptive dwell is a type of scan that dynamically changes the time it remains on each channel listening for beacons or probe responses. Signed-off-by: NRoee Zamir <roee.zamir@intel.com> Signed-off-by: NBeni Lev <beni.lev@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
- 28 3月, 2018 3 次提交
-
-
由 Luca Coelho 提交于
Sometimes iwl_mvm_disable_txq() may be called with mac80211_queue == IEEE80211_INVAL_HW_QUEUE, and this would cause us to use BIT(0xFF) which is way too large for the u16 we used to store it in hw_queue_to_mac820211. If this happens the following UBSAN warning will be generated: [ 167.185167] UBSAN: Undefined behaviour in drivers/net/wireless/intel/iwlwifi/mvm/utils.c:838:5 [ 167.185171] shift exponent 255 is too large for 64-bit type 'long unsigned int' Fix that by checking that it is not IEEE80211_INVAL_HW_QUEUE and, while at it, add a warning if the queue number is larger than IEEE80211_MAX_QUEUES. Fixes: 34e10860 ("iwlwifi: mvm: remove references to queue_info in new TX path") Reported-by: NPaul Menzel <pmenzel+linux-wireless@molgen.mpg.de> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Sara Sharon 提交于
This makes future bail-outs from transmitting an AMSDU more readable. Signed-off-by: NSara Sharon <sara.sharon@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Sara Sharon 提交于
RCU isn't properly locked. Fixes: 46d372af ("iwlwifi: mvm: rs: new rate scale API - add FW notifications") Signed-off-by: NSara Sharon <sara.sharon@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-