- 21 1月, 2009 11 次提交
-
-
-
由 Tejun Heo 提交于
Impact: file rename tlb_64.c is now the tlb code for both 32 and 64. Rename it to tlb.c. Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Tejun Heo 提交于
Impact: less contention when issuing invalidate IPI, cleanup Make x86_32 use the same tlb code as 64bit. The 64bit code uses multiple IPI vectors for tlb shootdown to reduce contention. This patch makes x86_32 allocate the same 8 IPIs as x86_64 and share the code paths. Note that the usage of asmlinkage is inconsistent for x86_32 and 64 and calls for further cleanup. This has been noted with a FIXME comment in tlb_64.c. Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Tejun Heo 提交于
Impact: clean up, ipi vector number reordering for x86_32 Make the following changes to prepare for tlb merge. * reorder x86_32 ip vectors * adjust tlb_32.c and tlb_64.c such that their logics coincide exactly - on spurious invalidate ipi, tlb_32 acks the irq - tlb_64 now has proper memory barriers around clearing flush_cpumask (no change in generated code) * unexport flush_tlb_page from tlb_32.c, there's no user * use unsigned int for cpu id * drop unnecessary includes from tlb_64.c Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Tejun Heo 提交于
Impact: cleanup Make the following uv related cleanups. * collect visible uv related definitions and interfaces into uv/uv.h and use it. this cleans up the messy situation where on 64bit, uv is defined properly, on 32bit generic it's dummy and on the rest undefined. after this clean up, uv is defined on 64 and dummy on 32. * update uv_flush_tlb_others() such that it takes cpumask of to-be-flushed cpus as argument, instead of that minus self, and returns yet-to-be-flushed cpumask, instead of modifying the passed in parameter. this interface change will ease dummy implementation of uv_flush_tlb_others() and makes uv tlb flush related stuff defined in tlb_uv proper. Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Brian Gerst 提交于
Impact: cleanup, better irq_regs code generation for x86_64 Make 64-bit use the same optimizations as 32-bit. Signed-off-by: NBrian Gerst <brgerst@gmail.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Brian Gerst 提交于
Impact: cleanup tj: * changed cpu to unsigned as was done on mmu_context_64.h as cpu id is officially unsigned int * added missing ';' to 32bit version of deactivate_mm() Signed-off-by: NBrian Gerst <brgerst@gmail.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Brian Gerst 提交于
Impact: cleanup %fs is currently set to __KERNEL_DS at boot, and conditionally switched to __KERNEL_PERCPU for secondary cpus. Instead, initialize GDT_ENTRY_PERCPU to the same attributes as GDT_ENTRY_KERNEL_DS and set %fs to __KERNEL_PERCPU unconditionally. Signed-off-by: NBrian Gerst <brgerst@gmail.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Brian Gerst 提交于
Impact: slightly better code generation for percpu_to_op() The processor will sign-extend 32-bit immediate values in 64-bit operations. Use the 'e' constraint ("32-bit signed integer constant, or a symbolic reference known to fit that range") for 64-bit constants. Signed-off-by: NBrian Gerst <brgerst@gmail.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Brian Gerst 提交于
Impact: cleanup && more compact percpu area layout with future changes Move 64-bit GDT to page-aligned section and clean up comment formatting. Signed-off-by: NBrian Gerst <brgerst@gmail.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Tejun Heo 提交于
Impact: cleanup In switch_to(), instead of taking offset to irq_stack_union.stack, make it a proper percpu access using __percpu_arg() and per_cpu_var(). Signed-off-by: NTejun Heo <tj@kernel.org>
-
- 20 1月, 2009 10 次提交
-
-
-
由 Tejun Heo 提交于
Impact: cleanup With .data.percpu.first in place, PERCPU_VADDR_PREALLOC() is no longer necessary. Kill it. Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Brian Gerst 提交于
Impact: cleanup Signed-off-by: NBrian Gerst <brgerst@gmail.com>
-
由 Brian Gerst 提交于
Impact: x86_64 percpu area layout change, irq_stack now at the beginning Now that the PDA is empty except for the stack canary, it can be removed. The irqstack is moved to the start of the per-cpu section. If the stack protector is enabled, the canary overlaps the bottom 48 bytes of the irqstack. tj: * updated subject * dropped asm relocation of irq_stack_ptr * updated comments a bit * rebased on top of stack canary changes Signed-off-by: NBrian Gerst <brgerst@gmail.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Brian Gerst 提交于
Impact: cleanup Use cpu_number to determine if the adjustment is necessary. Signed-off-by: NBrian Gerst <brgerst@gmail.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Brian Gerst 提交于
Impact: cleanup Refactor the DEFINE_PER_CPU_* macros and add .data.percpu.first section. Signed-off-by: NBrian Gerst <brgerst@gmail.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Brian Gerst 提交于
Impact: cleanup Copy the code to cpu_init() to satisfy the requirement that the cpu be reinitialized. Remove all other calls, since the segments are already initialized in head_64.S. Signed-off-by: NBrian Gerst <brgerst@gmail.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Tejun Heo 提交于
Impact: no unnecessary stack canary swapping during context switch There's no point in moving stack_canary around during context switch if it's not enabled. Conditionalize it. Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Tejun Heo 提交于
Impact: cleanup Make the following cleanups. * remove duplicate comment from boot_init_stack_canary() which fits better in the other place - cpu_idle(). * move stack_canary offset check from __switch_to() to boot_init_stack_canary(). Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Ingo Molnar 提交于
Impact: build fix Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 19 1月, 2009 3 次提交
-
-
由 Ingo Molnar 提交于
-
由 Ingo Molnar 提交于
Conflicts: arch/x86/include/asm/pda.h arch/x86/include/asm/system.h Also, moved include/asm-x86/stackprotector.h to arch/x86/include/asm. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
-
- 18 1月, 2009 12 次提交
-
-
由 Brian Gerst 提交于
Accessing memory through %gs should not use rip-relative addressing. Adding a P prefix for the argument tells gcc to not add (%rip) to the memory references. Signed-off-by: NBrian Gerst <brgerst@gmail.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Brian Gerst 提交于
tj: s/isidle/is_idle/ Signed-off-by: NBrian Gerst <brgerst@gmail.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Brian Gerst 提交于
tj: * s/nodenumber/node_number/ * removed now unused pda variable from pda_init() Signed-off-by: NBrian Gerst <brgerst@gmail.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Brian Gerst 提交于
tj: s/irqcount/irq_count/ Signed-off-by: NBrian Gerst <brgerst@gmail.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Brian Gerst 提交于
tj: * in asm-offsets_64.c, pda.h inclusion shouldn't be removed as pda is still referenced in the file * s/oldrsp/old_rsp/ Signed-off-by: NBrian Gerst <brgerst@gmail.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Brian Gerst 提交于
Also clean up PER_CPU_VAR usage in xen-asm_64.S tj: * remove now unused stack_thread_info() * s/kernelstack/kernel_stack/ * added FIXME comment in xen-asm_64.S Signed-off-by: NBrian Gerst <brgerst@gmail.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Brian Gerst 提交于
Signed-off-by: NBrian Gerst <brgerst@gmail.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Brian Gerst 提交于
tj: moved cpu_number definition out of CONFIG_HAVE_SETUP_PER_CPU_AREA for voyager. Signed-off-by: NBrian Gerst <brgerst@gmail.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Brian Gerst 提交于
Move the exception stacks to per-cpu, removing specific allocation code. Signed-off-by: NBrian Gerst <brgerst@gmail.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Brian Gerst 提交于
Move the irqstackptr variable from the PDA to per-cpu. Make the stacks themselves per-cpu, removing some specific allocation code. Add a seperate flag (is_boot_cpu) to simplify the per-cpu boot adjustments. tj: * sprinkle some underbars around. * irq_stack_ptr is not used till traps_init(), no reason to initialize it early. On SMP, just leaving it NULL till proper initialization in setup_per_cpu_areas() works. Dropped is_boot_cpu and early irq_stack_ptr initialization. * do DECLARE/DEFINE_PER_CPU(char[IRQ_STACK_SIZE], irq_stack) instead of (char, irq_stack[IRQ_STACK_SIZE]). Signed-off-by: NBrian Gerst <brgerst@gmail.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Brian Gerst 提交于
Signed-off-by: NBrian Gerst <brgerst@gmail.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Brian Gerst 提交于
Signed-off-by: NBrian Gerst <brgerst@gmail.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
- 17 1月, 2009 2 次提交
-
-
由 Tejun Heo 提交于
arm, arm/mach-integrator and powerpc were missing .data.percpu.page_aligned in their percpu output section definitions. Add it. Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Tejun Heo 提交于
The newly added PERCPU_*() macros define and use __per_cpu_load but VMLINUX_SYMBOL() was missing from usages causing build failures on archs where linker visible symbol is different from C symbols (e.g. blackfin). Signed-off-by: NTejun Heo <tj@kernel.org>
-
- 16 1月, 2009 2 次提交
-
-
由 Tejun Heo 提交于
On x86_64, if get_per_cpu_var() is used before per cpu area is setup (if lockdep is turned on, it happens), it needs this_cpu_off to point to __per_cpu_load. Initialize accordingly. Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Tejun Heo 提交于
EXPORT_PER_CPU_SYMBOL() got misplaced during merge leading to build failure. Fix it. Signed-off-by: NTejun Heo <tj@kernel.org>
-