This adds code to check that when the KVM_CAP_PPC_ENABLE_HCALL
capability is used to enable or disable in-kernel handling of an
hcall, that the hcall is actually implemented by the kernel.
If not an EINVAL error is returned.

This also checks the default-enabled list of hcalls and prints a
warning if any hcall there is not actually implemented.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This provides a way for userspace controls which sPAPR hcalls get
handled in the kernel.  Each hcall can be individually enabled or
disabled for in-kernel handling, except for H_RTAS.  The exception
for H_RTAS is because userspace can already control whether
individual RTAS functions are handled in-kernel or not via the
KVM_PPC_RTAS_DEFINE_TOKEN ioctl, and because the numeric value for
H_RTAS is out of the normal sequence of hcall numbers.

Hcalls are enabled or disabled using the KVM_ENABLE_CAP ioctl for the
KVM_CAP_PPC_ENABLE_HCALL capability on the file descriptor for the VM.
The args field of the struct kvm_enable_cap specifies the hcall number
in args[0] and the enable/disable flag in args[1]; 0 means disable
in-kernel handling (so that the hcall will always cause an exit to
userspace) and 1 means enable.  Enabling or disabling in-kernel
handling of an hcall is effective across the whole VM.

The ability for KVM_ENABLE_CAP to be used on a VM file descriptor
on PowerPC is new, added by this commit.  The KVM_CAP_ENABLE_CAP_VM
capability advertises that this ability exists.

When a VM is created, an initial set of hcalls are enabled for
in-kernel handling.  The set that is enabled is the set that have
an in-kernel implementation at this point.  Any new hcall
implementations from this point onwards should not be added to the
default set without a good reason.

No distinction is made between real-mode and virtual-mode hcall
implementations; the one setting controls them both.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>

On vcpu schedule, the condition checked for tlb pollution is too loose.
The tlb entries of a vcpu become polluted (vs stale) only when a different
vcpu within the same logical partition runs in-between. Optimize the tlb
invalidation condition keeping last_vcpu per logical partition id.

With the new invalidation condition, a guest shows 4% performance improvement
on P5020DS while running a memory stress application with the cpu oversubscribed,
the other guest running a cpu intensive workload.

Guest - old invalidation condition
  real 3.89
  user 3.87
  sys 0.01

Guest - enhanced invalidation condition
  real 3.75
  user 3.73
  sys 0.01

Host
  real 3.70
  user 1.85
  sys 0.00

The memory stress application accesses 4KB pages backed by 75% of available
TLB0 entries:

char foo[ENTRIES][4096] __attribute__ ((aligned (4096)));

int main()
{
	char bar;
	int i, j;

	for (i = 0; i < ITERATIONS; i++)
        	for (j = 0; j < ENTRIES; j++)
            		bar = foo[j][0];

	return 0;
}
Signed-off-by: NMihai Caraman <mihai.caraman@freescale.com>
Reviewed-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

While sending sparse with endian checks over the code base, it triggered at
some places that were missing casts or had wrong types. Fix them up.
Signed-off-by: NAlexander Graf <agraf@suse.de>

We switched to ABIv2 on Little Endian systems now which gets rid of the
dotted function names. Branch to the actual functions when we see such
a system.
Signed-off-by: NAlexander Graf <agraf@suse.de>

Both kvmppc_hv_entry_trampoline and kvmppc_entry_trampoline are
assembly functions that are exported to modules and also require
a valid r2.

As such we need to use _GLOBAL_TOC so we provide a global entry
point that establishes the TOC (r2).
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>

To establish addressability quickly, ABIv2 requires the target
address of the function being called to be in r12.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>

If we're running PR KVM in HV mode, we may get hypervisor doorbell interrupts.
Handle those the same way we treat normal doorbells.
Signed-off-by: NAlexander Graf <agraf@suse.de>

Some compilers complain about uninitialized variables in the compute_tlbie_rb
function. When you follow the code path you'll realize that we'll never get
to that point, but the compiler isn't all that smart.

So just default to 4k page sizes for everything, making the compiler happy
and the code slightly easier to read.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Acked-by: NPaul Mackerras <paulus@samba.org>

When we're using PR KVM we must not allow the CPU to take interrupts
in virtual mode, as the SLB does not contain host kernel mappings
when running inside the guest context.

To make sure we get good performance for non-KVM tasks but still
properly functioning PR KVM, let's just disable AIL whenever a vcpu
is scheduled in.

This is fundamentally different from how we deal with AIL on pSeries
type machines where we disable AIL for the whole machine as soon as
a single KVM VM is up.

The reason for that is easy - on pSeries we do not have control over
per-cpu configuration of AIL. We also don't want to mess with CPU hotplug
races and AIL configuration, so setting it per CPU is easier and more
flexible.

This patch fixes running PR KVM on POWER8 bare metal for me.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Acked-by: NPaul Mackerras <paulus@samba.org>

Writing to IC is not allowed in the privileged mode.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

virtual time base register is a per VM, per cpu register that needs
to be saved and restored on vm exit and entry. Writing to VTB is not
allowed in the privileged mode.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[agraf: fix compile error]
Signed-off-by: NAlexander Graf <agraf@suse.de>

We use time base for PURR and SPURR emulation with PR KVM since we
are emulating a single threaded core. When using time base
we need to make sure that we don't accumulate time spent in the host
in PURR and SPURR value.

Also we don't need to emulate mtspr because both the registers are
hypervisor resource.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

A struct member variable is set to the same value more than once

This was found using a static code analysis program called cppcheck.
Signed-off-by: NRickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

It's impossible to fall into the error handling of the TLB index after
being masked by (KVM_MIPS_GUEST_TLB_SIZE - 1). Remove the dead code.
Reported-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NDeng-Cheng Zhu <dengcheng.zhu@imgtec.com>
Reviewed-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The commpage is allocated using kzalloc(), so there's no need of cleaning
the memory of the kvm_mips_commpage struct and its internal mips_coproc.
Reviewed-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NDeng-Cheng Zhu <dengcheng.zhu@imgtec.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Since all the files are in arch/mips/kvm/, there's no need of the prefixes
"kvm_" and "kvm_mips_".
Reviewed-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NDeng-Cheng Zhu <dengcheng.zhu@imgtec.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The keyword volatile for idx in the TLB functions is unnecessary.
Reviewed-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NDeng-Cheng Zhu <dengcheng.zhu@imgtec.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

No logic changes inside.
Reviewed-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NDeng-Cheng Zhu <dengcheng.zhu@imgtec.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Replace printks with kvm_[err|info|debug].
Signed-off-by: NDeng-Cheng Zhu <dengcheng.zhu@imgtec.com>
Reviewed-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

No logic changes inside.
Signed-off-by: NDeng-Cheng Zhu <dengcheng.zhu@imgtec.com>
Reviewed-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Merge tag 'kvms390-20140626' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

Fix sie.h header related problems introduced during the 3.16 development
cycle.

Fix bad x86 regression introduced during merge window.

We import the CPL via SS.DPL since ae9fedc7. However, we fail to
export it this way so far. This caused spurious guest crashes, e.g. of
Linux when accessing the vmport from guest user space which triggered
register saving/restoring to/from host user space.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

sie.h was missing in arch/s390/include/uapi/asm/Kbuild and therefore missed
the "make headers_check" target.
If added it reveals that also arch/s390/include/asm/sigp.h would become uapi.
This is something we certainly do not want. So remove that dependency as well.

The header file was merged with ceae283b "KVM: s390: add sie exit
reasons tables", therefore we never had a kernel release with this commit and
can still change anything.
Acked-by: NAlexander Yarygin <yarygin@linux.vnet.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

VMX instructions use 32-bit operands in 32-bit mode, and 64-bit operands in
64-bit mode.  The current implementation is broken since it does not use the
register operands correctly, and always uses 64-bit for reads and writes.
Moreover, write to memory in vmwrite only considers long-mode, so it ignores
cs.l. This patch fixes this behavior.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

On 32-bit mode only bits [31:0] of the CR should be used for setting the CR
value.  Otherwise, the host may incorrectly assume the value is invalid if bits
[63:32] are not zero.  Moreover, the CR is currently being read twice when CR8
is used.  Last, nested mov-cr exiting is modified to handle the CR value
correctly as well.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Currently, the hypercall handling routine only considers LME as an indication
to whether the guest uses 32/64-bit mode. This is incosistent with hyperv
hypercalls handling and against the common sense of considering cs.l as well.
This patch uses is_64_bit_mode instead of is_long_mode for that matter. In
addition, the result is masked in respect to the guest execution mode. Last, it
changes kvm_hv_hypercall to use is_64_bit_mode as well to simplify the code.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When the guest sets DR6 and DR7, KVM asserts the high 32-bits are clear, and
otherwise injects a #GP exception. This exception should only be injected only
if running in long-mode.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Many real CPUs get this wrong as well, but ours is totally off: bits 9:1
define the highest index value.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Allow L1 to "leak" its debug controls into L2, i.e. permit cleared
VM_{ENTRY_LOAD,EXIT_SAVE}_DEBUG_CONTROLS. This requires to manually
transfer the state of DR7 and IA32_DEBUGCTLMSR from L1 into L2 as both
run on different VMCS.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

SDM says bits 1, 4-6, 8, 13-16, and 26 have to be set.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

We already have this control enabled by exposing a broken
MSR_IA32_VMX_PROCBASED_CTLS value. This will properly advertise our
capability once the value is fixed by clearing the right bits in
MSR_IA32_VMX_TRUE_PROCBASED_CTLS. We also have to ensure to test the
right value on L2 entry.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

We already implemented them but failed to advertise them. Currently they
all return the identical values to the capability MSRs they are
augmenting. So there is no change in exposed features yet.

Drop related comments at this chance that are partially incorrect and
redundant anyway.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The spec says those controls are at bit position 2 - makes 4 as value.

The impact of this mistake is effectively zero as we only use them to
ensure that these features are set at position 2 (or, previously, 1) in
MSR_IA32_VMX_{EXIT,ENTRY}_CTLS - which is and will be always true
according to the spec.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

On long-mode the current NOP (0x90) emulation still writes back to RAX.  As a
result, EAX is zero-extended and the high 32-bits of RAX are cleared.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Even if the condition of cmov is not satisfied, bits[63:32] should be cleared.
This is clearly stated in Intel's CMOVcc documentation.  The solution is to
reassign the destination onto itself if the condition is unsatisfied.  For that
matter the original destination value needs to be read.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Return unhandlable error on inter-privilege level ret instruction.  This is
since the current emulation does not check the privilege level correctly when
loading the CS, and does not pop RSP/SS as needed.

Cc: stable@vger.kernel.org
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The emulator does not emulate the xadd instruction correctly if the two
operands are the same.  In this (unlikely) situation the result should be the
sum of X and X (2X) when it is currently X.  The solution is to first perform
writeback to the source, before writing to the destination.  The only
instruction which should be affected is xadd, as the other instructions that
perform writeback to the source use the extended accumlator (e.g., RAX:RDX).
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The current emulation of bit operations ignores the offset from the destination
on 64-bit target memory operands. This patch fixes this behavior.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>