- 27 1月, 2008 17 次提交
-
-
* Make remaining built-in only IDE host drivers modular, add ide-scan-pci.c file for probing PCI host drivers registered with IDE core (special case for built-in IDE and CONFIG_IDEPCI_PCIBUS_ORDER=y) and then take care of the ordering in which all IDE host drivers are probed when IDE is built-in during link time. * Move probing of gayle, falconide, macide, q40ide and buddha (m68k arch specific) host drivers, before PCI ones (no PCI on m68k), ide-cris (cris arch specific), cmd640 (x86 arch specific) and pmac (ppc arch specific). * Move probing of ide-cris (cris arch specific) host driver before cmd640 (x86 arch specific). * Move probing of mpc8xx (ppc specific) host driver before ide-pnp (depends on ISA and none of ppc platform that use mpc8xx supports ISA) and ide-h8300 (h8300 arch specific). * Add "probe_vlb" kernel parameter to cmd640 host driver and update Documentation/ide.txt accordingly. * Make IDE_ARM config option visible so it can also be disabled if needed. * Remove bogus comment from ide.c while at it. v2: * Fix two issues spotted by Sergei: - replace ENOMEM error value by ENOENT in ide-h8300 host driver - fix MODULE_PARM_DESC() in cmd640 host driver Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Add mpc8xx_ide_probe() to mpc8xx.c and call it from probe_for_hwifs(). * Convert ide_arm, ide-cris, ide-h8300, ide-pnp, buddha, falconide, gayle, macide, q40ide, cmd640 and mpc8xx host drivers to use ide_device_add(). This removes dependency on ide_generic for these drivers so update ide/Kconfig accordingly. v2: * ide_arm build fix (s/ide_device_idx/ide_device_add/) (Thanks to Christoph Lameter <clameter@sgi.com> for reporting the problem). Cc: Mikael Starvik <starvik@axis.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Rename init_hwif_data() to ide_init_port_data() and export it. * For all users of ide_register_hw() with 'initializing' argument set hwif->present and hwif->hold are always zero so convert these host drivers to use ide_find_port()+ide_init_port_data()+ide_init_port_hw() instead (also no need for init_hwif_default() call since the setup done by it gets over-ridden by ide_init_port_hw() call). * Drop 'initializing' argument from ide_register_hw(). Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Add ide_init_port_hw() helper. * rapide.c: convert rapide_locate_hwif() to rapide_setup_ports() and use ide_init_port_hw(). * ide_platform.c: convert plat_ide_locate_hwif() to plat_ide_setup_ports() and use ide_init_port_hw(). * sgiioc4.c: use ide_init_port_hw(). * pmac.c: add 'hw_regs_t *hw' argument to pmac_ide_setup_device(), setup 'hw' in pmac_ide_{macio,pci}_attach() and use ide_init_port_hw() in pmac_ide_setup_device(). This patch is a preparation for the future changes in the IDE probing code. There should be no functionality changes caused by this patch. Cc: Russell King <rmk@arm.linux.org.uk> Cc: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Jeremy Higdon <jeremy@sgi.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
'if (hwif->io_ports[IDE_DATA_OFFSET] != cmd_base)' is always true. Cc: Jeremy Higdon <jeremy@sgi.com> Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Assign drive->quirk_list in ->quirkproc implementations: - hpt366.c::hpt3xx_quirkproc() - pdc202xx_new.c::pdcnew_quirkproc() - pdc202xx_old.c::pdc202xx_quirkproc() * Make ->quirkproc void. * Move calling ->quirkproc from do_identify() to probe_hwif(). * Convert it821x_fixups() to it821x_quirkproc() in it821x.c. * Convert siimage_fixup() to sil_quirkproc() in siimage.c, also remove no longer needed drive->present check from is_dev_seagate_sata(). * Convert ide_undecoded_slave() to accept 'drive' instead of 'hwif' as an argument. Then convert ide_register_hw() to accept 'quirkproc' argument instead of 'fixup' one. * Remove no longer needed ->fixup method. Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Merge ->dma_host_{on,off} methods into ->dma_host_set method which takes 'int on' argument. There should be no functionality changes caused by this patch. Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Enable/disable UDMA in atiixp_set_dma_mode(). * Remove no longer needed atiixp_dma_host_{on,off}() and save_mdma_mode[]. * Bump driver version. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Make ide_dma_off_quietly() and __ide_dma_on() always available. * Drop "__" prefix from __ide_dma_on(). * Check for presence of ->dma_host_on instead of ->ide_dma_on. * Convert all users of ->ide_dma_on and ->dma_off_quietly methods to use ide_dma_on() and ide_dma_off_quietly() instead. * Remove no longer needed ->ide_dma_on and ->dma_off_quietly methods from ide_hwif_t. * Make ide_dma_on() void. There should be no functionality changes caused by this patch. Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Add ide_toggle_bounce() call to ->ide_dma_on/->dma_off_quietly methods so they match generic __ide_dma_on()/ide_dma_off_quietly(). Tested on Altix by Jeremy. Acked-by: NJeremy Higdon <jeremy@sgi.com> Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Fix SWDMA/MWDMA masks in cy82c693_chipset. * Add IDE_HFLAG_CY82C693 host flag and use it in ide_tune_dma() to check whether the DMA should be enabled even if ide_max_dma_mode() fails. * Convert cy82c693_dma_enable() to become cy82c693_set_dma_mode() and remove no longer needed cy82c693_ide_dma_on(). Then set IDE_HFLAG_CY82C693 instead of IDE_HFLAG_TRUST_BIOS_FOR_DMA in cy82c693_chipset. * Bump driver version. As a result of this patch cy82c693 driver will configure and use DMA on all SWDMA0-2 and MWDMA0-2 capable ATA devices instead of relying on BIOS. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Mask device DMA masks by ATA_{S,M}WDMA2 in cy82c693_ide_dma_on(). * Remove clipping of DMA modes by id->tDMA in cy82c693_dma_enable(): - id->tDMA may not be defined on newer devices - id->vendor6/id->tDMA word is in LE endianness (cy82c693 seems to be Alpha specific though) * Bump driver version. Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Set the correct hwif->dma_base for the second channel in ide_get_or_set_dma_base(). * Remove DMA enable code from cs5520_set_pio_mode(), this can be handled by the generic ->dma_host_on method now. * Add VDMA check to ide_config_drive_speed(). * drive->using_dma was never enabled since cs5520 host driver's ->ide_dma_on method overrided the generic ->ide_dma_on (so __ide_dma_on() was never called, drive->using_dma was never set and VDMA was never used since it depends on drive->using_dma). Fix it by using ->dma_host_on method instead of ->ide_dma_on (also add matching ->dma_host_off method). Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
IDE core guarantees that ->set_dma_mode will be called only for DMA modes set in SWDMA/MWDMA/UDMA masks. There should be no functionality changes caused by this patch. Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Program register 0x40 in sl82c105_resetproc(). * Remove no longer needed sl82c105_selectproc() and pci_set_drvdata() calls. Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Program DMA timings in sl82c105_dma_start() (->dma_start method) before starting DMA transfer. * Add sl82c105_dma_end() (->ide_dma_end method) to switch back to PIO timings when DMA transfer is complete. * In sl82c105_set_pio_mode() program timings regardless of ->using_dma setting and in sl82c105_set_dma_mode() only cache the new timings. * Remove no longer needed sl82c105_{ide_dma_on,off_quietly}(). Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
- 26 1月, 2008 10 次提交
-
-
Based on pata_sc1200.c. There should be no functionality changes caused by this patch. Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Add IDE_HFLAG_ABUSE_SET_DMA_MODE host flag and use it to decide what to do with transfer modes < XFER_PIO_0 in ide_set_xfer_rate(). * Set IDE_HFLAG_ABUSE_SET_DMA_MODE in host drivers that need it (aec62xx, amd74xx, cs5520, cs5535, hpt34x, hpt366, pdc202xx_old, serverworks, tc86c001 and via82cxxx) and cleanup ->set_dma_mode methods in host drivers that don't (IDE core code guarantees that ->set_dma_mode will be called only for modes which are present in SWDMA/MWDMA/UDMA masks). While at it: * Add IDE_HFLAGS_HPT34X/HPT3XX/PDC202XX/SVWKS define in hpt34x/hpt366/pdc202xx_old/serverworks host driver. There should be no functionality changes caused by this patch. Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Factor out UDMA programming code from sis_set_dma_mode() to per chipset family helpers: sis_{ata33,ata133}_program_udma_timings(). * Add sis_program_udma_timings() helper. * Remove unneeded casts to 'unsigned long'. * Minor cleanups. There should be no functionality changes caused by this patch. Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Move PIO programming code from pdcnew_set_mode() to pdcnew_set_pio_mode(). * Rename pdcnew_set_mode() to pdcnew_set_dma_mode(). There should be no functionality changes caused by this patch. Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Save PCI regs values for both IDE ports in one buffer, in order to eliminate a needless and ugly loop across all hwifs, searching for our PCI device. Partially based on the previous patch by Jeff Garzik. Cc: Jeff Garzik <jeff@garzik.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Given that: * hpt366.c::hpt3xx_intrproc() is the only user of hwif->intrproc * hpt366.c::hpt3xx_quirkproc() sets drive->quirk_list to 1 for quirky drives which is a value unique to hpt366 host driver we can remove hwif->intproc and just check for drive->quirk_list == 1 in ide_do_request(). Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Convert cmd64x, hpt366 and pdc202xx_old host drivers to use pci_resource_start(hwif->pci_dev, 4) instead of hwif->dma_master. * Remove no longer needed ->dma_master field from ide_hwif_t. v2: * Use the more readable 'hwif->dma_base - (hwif->channel * 8)' instead of pci_resource_start(hwif->pci_dev, 4). v3: * Use hwif->extra_base in hpt366/pdc20xx_old + some cosmetic fixups over v2 (suggested by Sergei). v4: * Correct offsets in hpt3xxn_set_clock(). v5: * Use hwif->extra_base in hpt366 for _real_ this time. (Noticed by Sergei) Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Sergei Shtylyov 提交于
Group the array of pointers to the timing tables with the timing register masks which allows us to merge HPT36x/HPT37x set_dma_mode() methods into one. Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Sergei Shtylyov 提交于
There's no reason to keep the set_dma_mode() method wrapper for two different chip families, so get rid of it... Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Sergei Shtylyov 提交于
Since PIO autotuning is now done always, there's no need anymore to program the taskfile timings also on DMA modes, so change the IDE timing register masks accordingly, "inverting the polarity" of the masks while at it... Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
- 11 1月, 2008 1 次提交
-
-
由 Sergei Shtylyov 提交于
Using default methods caused the chip's DMA PRD count registers, inadvertently starting DMA! While fixing it, also do: - get rid of the 'ide_' prefixes in several functions for which the prefix in the method's name has been 'ide_' ectomized already; - align the code hooking the IDE DMA methods in init_hwif_trm290()... Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
- 24 12月, 2007 2 次提交
-
-
commit 528a572d ("ide: add ->chipset field to ide_pci_device_t") broke hwif->chipset setup (it is now set to ide_cmd646 for CMD648 instead of CMD646). It seems that the breakage happend while I was moving patches around (cmd64x_chipsets[] entries for CMD646 and CMD648 are identical except for 'name' field). Fix it and bump driver version. Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Cc: Andrew Morton <akpm@linux-foundation.org>, Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
- 13 12月, 2007 2 次提交
-
-
由 Sergei Shtylyov 提交于
After looking into the HPT370 manual (now that I have it) and re-checking all the timing tables, here's what I have discovered: - at 33 MHz clock, PIO mode 0 timings turned to be overclocked, and all other PIO modes underclocked; - at 50 MHz clock, PIO modes 0 to 2 turned to be overclocked; - at 66 MHz clock, PIO mode 0 was overclocked too. Finally, the taskfile timing (matching PIO mode 0) turned to be overclocked at all clock frequencies (and in all manuals)... The new timings have been tested on HPT370 chip (at 33 MHz PCI clock) and on HPT371N chip (at both 50 and 66 MHz DPLL clock). Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
In case of Promise TX4 the first PCI device is located at slot 1 and the second one is at slot 2 so the offset used by pci_get_slot() should be "+1" and not "+2". Thanks goes out to Markus Dietz for bugreport and testing this patch. Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
- 28 11月, 2007 6 次提交
-
-
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Port of Jeff's libata commit 54174db3 ("[libata] ata_piix: add HP compaq laptop to short cable list"). Cc: Jeff Garzik <jeff@garzik.org> Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Port of Alan's patch for pata_ali.c. Cc: Alan Cox <alan@redhat.com> Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Aleksandar Radovanovic 提交于
Add pci_enable_device() to aec62xx probe function before doing any I/O. Original probe function tries to read from device's PCI region 4 before calling ide_setup_pci_device(). Since the device is not enabled at this point, on machines that have no firmware PCI initialization (e.g. ASUS WL-700gE router), corresponding PCI BAR is 0 and the following inb() causes a kernel oops. Signed-off-by: NAleksandar Radovanovic <biblbroks@sezampro.yu> Cc: Linus Torvalds <torvalds@linux-foundation.org>, Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Sergei Shtylyov 提交于
The intent behind siimage_reset() was probably to hard reset the interface and the SATA PHY but as the code writes to two reserved bits instead, it obviously has been ineffective from the start. So, just remove it. Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Gabriel Craciunescu 提交于
With newer kernels HDD in my old laptop is limited to UDMA 33. With this patch I get UDMA 100 again. Signed-off-by: NGabriel Craciunescu <nix.or.die@googlemail.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
- 14 11月, 2007 2 次提交
-
-
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Fix ide-cris, cs5530, sc1200 and sis5513 host drivers to just return instead of OOPS-ing for unsupported modes in ->set_dma_mode methods. Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-