The vGPU folks would like to trap the first access to a BAR by setting
vm_ops on the VMAs produced by mmap-ing a VFIO device.  The fault handler
then can use remap_pfn_range to place some non-reserved pages in the VMA.

This kind of VM_PFNMAP mapping is not handled by KVM, but follow_pfn
and fixup_user_fault together help supporting it.  The patch also supports
VM_MIXEDMAP vmas where the pfns are not reserved and thus subject to
reference counting.

Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Tested-by: NNeo Jia <cjia@nvidia.com>
Reported-by: NKirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Handle VM_IO like VM_PFNMAP, as is common in the rest of Linux; extract
the formula to convert hva->pfn into a new function, which will soon
gain more capabilities.

Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

INFO: rcu_sched detected stalls on CPUs/tasks:
 1-...: (11800 GPs behind) idle=45d/140000000000000/0 softirq=0/0 fqs=21663
 (detected by 0, t=65016 jiffies, g=11500, c=11499, q=719)
Task dump for CPU 1:
qemu-system-x86 R  running task        0  3529   3525 0x00080808
 ffff8802021791a0 ffff880212895040 0000000000000001 00007f1c2c00db40
 ffff8801dd20fcd3 ffffc90002b98000 ffff8801dd20fc88 ffff8801dd20fcf8
 0000000000000286 ffff8801dd2ac538 ffff8801dd20fcc0 ffffffffc06949c9
Call Trace:
? kvm_write_guest_cached+0xb9/0x160 [kvm]
? __delay+0xf/0x20
? wait_lapic_expire+0x14a/0x200 [kvm]
? kvm_arch_vcpu_ioctl_run+0xcbe/0x1b00 [kvm]
? kvm_arch_vcpu_ioctl_run+0xe34/0x1b00 [kvm]
? kvm_vcpu_ioctl+0x2d3/0x7c0 [kvm]
? __fget+0x5/0x210
? do_vfs_ioctl+0x96/0x6a0
? __fget_light+0x2a/0x90
? SyS_ioctl+0x79/0x90
? do_syscall_64+0x7c/0x1e0
? entry_SYSCALL64_slow_path+0x25/0x25

This can be reproduced readily by running a full dynticks guest(since hrtimer
in guest is heavily used) w/ lapic_timer_advance disabled.

If fail to program hardware preemption timer, we will fallback to hrtimer based
method, however, a previous programmed preemption timer miss to cancel in this
scenario which results in one hardware preemption timer and one hrtimer emulated
tsc deadline timer run simultaneously. So sometimes the target guest deadline
tsc is earlier than guest tsc, which leads to the computation in vmx_set_hv_timer
can underflow and cause delta_tsc to be set a huge value, then host soft lockup
as above.

This patch fix it by cancelling the previous programmed preemption timer if there
is once we failed to program the new preemption timer and fallback to hrtimer
based method.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Yunhong Jiang <yunhong.jiang@intel.com>
Signed-off-by: NWanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Introduce cancel_hv_tscdeadline() to encapsulate preemption
timer cancel stuff.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Yunhong Jiang <yunhong.jiang@intel.com>
Signed-off-by: NWanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

If the TSC deadline timer is programmed really close to the deadline or
even in the past, the computation in vmx_set_hv_timer can underflow and
cause delta_tsc to be set to a huge value.  This generally results
in vmx_set_hv_timer returning -ERANGE, but we can fix it by limiting
delta_tsc to be positive or zero.
Reported-by: NWanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This gains a few clock cycles per vmexit.  On Intel there is no need
anymore to enable the interrupts in vmx_handle_external_intr, since
we are using the "acknowledge interrupt on exit" feature.  AMD
needs to do that, and must be careful to avoid the interrupt shadow.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This is necessary to simplify handle_external_intr in the next patch.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Use the functions from context_tracking.h directly.

Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Make kvm_guest_{enter,exit} and __kvm_guest_{enter,exit} trivial wrappers
around the code in context_tracking.h.  Name the context_tracking.h functions
consistently with what those for kernel<->user switch.

Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Combine the kvm_enter, kvm_reenter and kvm_out trace events into a
single kvm_transition event class to reduce duplication and bloat.
Suggested-by: NSteven Rostedt <rostedt@goodmis.org>
Fixes: 93258604 ("MIPS: KVM: Add guest mode switch trace events")
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

KVM reads the current boottime value as a struct timespec in order to
calculate the guest wallclock time, resulting in an overflow in 2038
on 32-bit systems.

The data then gets passed as an unsigned 32-bit number to the guest,
and that in turn overflows in 2106.

We cannot do much about the second overflow, which affects both 32-bit
and 64-bit hosts, but we can ensure that they both behave the same
way and don't overflow until 2106, by using getboottime64() to read
a timespec64 value.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

On Intel platforms, this patch adds LMCE to KVM MCE supported
capabilities and handles guest access to LMCE related MSRs.
Signed-off-by: NAshok Raj <ashok.raj@intel.com>
[Haozhong: macro KVM_MCE_CAP_SUPPORTED => variable kvm_mce_cap_supported
           Only enable LMCE on Intel platform
           Check MSR_IA32_FEATURE_CONTROL when handling guest
             access to MSR_IA32_MCG_EXT_CTL]
Signed-off-by: NHaozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

KVM currently does not check the value written to guest
MSR_IA32_FEATURE_CONTROL, though bits corresponding to disabled features
may be set. This patch makes KVM to validate individual bits written to
guest MSR_IA32_FEATURE_CONTROL according to enabled features.
Signed-off-by: NHaozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

msr_ia32_feature_control will be used for LMCE and not depend only on
nested anymore, so move it from struct nested_vmx to struct vcpu_vmx.
Signed-off-by: NHaozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Merge tag 'kvm-s390-next-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

KVM: s390: vSIE (nested virtualization) feature for 4.8 (kvm/next)

With an updated QEMU this allows to create nested KVM guests
(KVM under KVM) on s390.

s390 memory management changes from Martin Schwidefsky or
acked by Martin. One common code memory management change (pageref)
acked by Andrew Morton.

The feature has to be enabled with the nested medule parameter.

Let's be careful first and allow nested virtualization only if enabled
by the system administrator. In addition, user space still has to
explicitly enable it via SCLP features for it to work.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

We have certain SIE features that we cannot support for now.
Let's add these features, so user space can directly prepare to enable
them, so we don't have to update yet another component.

In addition, add a comment block, telling why it is for now not possible to
forward/enable these features.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Guest 2 sets up the epoch of guest 3 from his point of view. Therefore,
we have to add the guest 2 epoch to the guest 3 epoch. We also have to take
care of guest 2 epoch changes on STP syncs. This will work just fine by
also updating the guest 3 epoch when a vsie_block has been set for a VCPU.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Whenever a SIGP external call is injected via the SIGP external call
interpretation facility, the VCPU is not kicked. When a VCPU is currently
in the VSIE, the external call might not be processed immediately.

Therefore we have to provoke partial execution exceptions, which leads to a
kick of the VCPU and therefore also kick out of VSIE. This is done by
simulating the WAIT state. This bit has no other side effects.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

As we want to make use of CPUSTAT_WAIT also when a VCPU is not idle but
to force interception of external calls, let's check in the bitmap instead.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Whenever we want to wake up a VCPU (e.g. when injecting an IRQ), we
have to kick it out of vsie, so the request will be handled faster.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

We can avoid one unneeded SIE entry after we reported a fault to g2.
Theoretically, g2 resolves the fault and we can create the shadow mapping
directly, instead of failing again when entering the SIE.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

We can easily enable ibs for guest 2, so he can use it for guest 3.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

We can easily enable cei for guest 2, so he can use it for guest 3.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

We can easily enable intervention bypass for guest 2, so it can use it
for guest 3.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

We can easily forward guest-storage-limit-suppression if available.

One thing to care about is keeping the prefix properly mapped when
gsls in toggled on/off or the mso changes in between. Therefore we better
remap the prefix on any mso changes just like we already do with the
prefix.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

We can easily forward the guest-PER-enhancement facility to guest 2 if
available.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

As we forward the whole SCA provided by guest 2, we can directly forward
SIIF if available.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Let's provide the 64-bit-SCAO facility to guest 2, so he can set up a SCA
for guest 3 that has a 64 bit address. Please note that we already require
the 64 bit SCAO for our vsie implementation, in order to forward the SCA
directly (by pinning the page).
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

As soon as guest 2 is allowed to use run-time-instrumentation (indicated
via via STFLE), it can also enable it for guest 3.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

As soon as guest 2 is allowed to use the vector facility (indicated via
STFLE), it can also enable it for guest 3. We have to take care of the
sattellite block that might be used when not relying on lazy vector
copying (not the case for KVM).
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

As soon as guest 2 is allowed to use transactional execution (indicated via
STFLE), he can also enable it for guest 3.

Active transactional execution requires also the second prefix page to be
mapped. If that page cannot be mapped, a validity icpt has to be presented
to the guest.

We have to take care of tx being toggled on/off, otherwise we might get
wrong prefix validity icpt.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

As soon as message-security-assist extension 3 is enabled for guest 2,
we have to allow key wrapping for guest 3.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Issuing STFLE is extremely rare. Instead of copying 2k on every
VSIE call, let's do this lazily, when a guest 3 tries to execute
STFLE. We can setup the block and retry.

Unfortunately, we can't directly forward that facility list, as
we only have a 31 bit address for the facility list designation.
So let's use a DMA allocation for our vsie_page instead for now.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Introduced with ESOP, therefore available for the guest if it
is allowed to use ESOP.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

If guest 2 is allowed to use edat 1 / edat 2, it can also set it up for
guest 3, so let's properly check and forward the edat cpuflags.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

As soon as we forward an ibc to guest 2 (indicated via
kvm->arch.model.ibc), he can also use it for guest 3. Let's properly round
the ibc up/down, so we avoid any potential validity icpts from the
underlying SIE, if it doesn't simply round the values.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

In order to not always map the prefix, we have to take care of certain
aspects that implicitly unmap the prefix:
- Changes to the prefix address
- Changes to MSO, because the HVA of the prefix is changed
- Changes of the gmap shadow (e.g. unshadowed, asce or edat changes)

By properly handling these cases, we can stop remapping the prefix when
there is no reason to do so.

This also allows us now to not acquire any gmap shadow locks when
rerunning the vsie and still having a valid gmap shadow.

Please note, to detect changing gmap shadows, we have to keep the reference
of the gmap shadow. The address of a gmap shadow does otherwise not
reliably indicate if the gmap shadow has changed (the memory chunk
could get reused).
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

This patch adds basic support for nested virtualization on s390x, called
VSIE (virtual SIE) and allows it to be used by the guest if the necessary
facilities are supported by the hardware and enabled for the guest.

In order to make this work, we have to shadow the sie control block
provided by guest 2. In order to gain some performance, we have to
reuse the same shadow blocks as good as possible. For now, we allow
as many shadow blocks as we have VCPUs (that way, every VCPU can run the
VSIE concurrently).

We have to watch out for the prefix getting unmapped out of our shadow
gmap and properly get the VCPU out of VSIE in that case, to fault the
prefix pages back in. We use the PROG_REQUEST bit for that purpose.

This patch is based on an initial prototype by Tobias Elpelt.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Let's introduce that helper.
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>