These clocks are required for usb operation. pll_p_out4 needs to be set
to 24 MHz. The other clocks default to "off" in order to save some energy.
Signed-off-by: NMarc Dietrich <marvin24@gmx.de>
Acked-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

8250.c recently gained an explicit PORT_TEGRA port type. Specifically
request this in all Tegra boards' UART platform data.
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

This reorders the SDHCI channel init order. With this patch, the
internal emmc gets the mmcblk0 device while the external sdmmc port
gets mmcblk1. This change is only for convenience.
Signed-off-by: NMarc Dietrich <marvin24@gmx.de>
Signed-off-by: NOlof Johansson <olof@lixom.net>

This adds support for the wifi led. It is automaticly triggered by
the rfkill0 event.
Signed-off-by: NMarc Dietrich <marvin24@gmx.de>
Signed-off-by: NOlof Johansson <olof@lixom.net>

This patch adds support for controlling the rfkill gpios for the
internal WIFI card via the rfkill_gpio driver.
Signed-off-by: NMarc Dietrich <marvin24@gmx.de>
Signed-off-by: NOlof Johansson <olof@lixom.net>

UART-A is connected to JP1 and used by the bootloader for debugging
output while UART-D is connected to the mini-pcie expansion slot.
Signed-off-by: NMarc Dietrich <marvin24@gmx.de>
Signed-off-by: NOlof Johansson <olof@lixom.net>

trimslice and paz00 both have functionally identical platform
data for the tegra-ehci driver.  Move the platform data into
devices.c, and remove it from all the board files.
Signed-off-by: NColin Cross <ccross@android.com>
Tested-by: NKonstantin Sinyuk <kostyas@compulab.co.il>
Acked-by: NOlof Johansson <olof@lixom.net>

Every board file includes the same platform data definition
for the i2c-tegra driver's bus speed.  Move the platform data
into devices.c, and remove it from all the board files.
Signed-off-by: NColin Cross <ccross@android.com>
Tested-by: NKonstantin Sinyuk <kostyas@compulab.co.il>
Acked-by: NOlof Johansson <olof@lixom.net>

This renames "paz00" in MACHINE_START macro to a neater string.
PAZ00 seems to have been the Compal internal project name, while
PROCYON looks like Toshiba project name.
Anyway, the AC100 support package in Ubuntu needs the new naming to
identify the machine.
Signed-off-by: NMarc Dietrich <marvin24@gmx.de>
Signed-off-by: NColin Cross <ccross@android.com>

The internal storage has no gpios connected to. Also the second
port is not connected at all, so remove it from the board file.
Signed-off-by: NMarc Dietrich <marvin24@gmx.de>
Signed-off-by: NColin Cross <ccross@android.com>

This patch add support for the second and third ehci bus on paz00.
The first bus needs gadget and nvec support and will be added once
the needed patches are upstream.
Signed-off-by: NMarc Dietrich <marvin24@gmx.de>
Signed-off-by: NColin Cross <ccross@android.com>

This adds support for the i2c busses on paz00. The 3rd bus is
reserved for the nvec, which acts as master and i2c-tegra has
not yet support for this kind of operation.
The sound codec (alc5632) is connected to the first bus and will
be added once the codec and glue driver is upstream.
The thermal sensor (atd7461) is connected to dvc as usual, but will
not be added now because i2c-tegra still misses probe support
(needs I2C_FUNC_SMBUS_EMUL).
Signed-off-by: NMarc Dietrich <marvin24@gmx.de>
Signed-off-by: NColin Cross <ccross@android.com>

This patch adds the config infrastructure, the pinmux and basic
board setup code for PAZ00 (name of board inside the AC100/AZ).
Signed-off-by: NMarc Dietrich <marvin24@gmx.de>
Signed-off-by: NOlof Johansson <olof@lixom.net>