My Linaro email address with be inactive very soon so switch
it to my Gmail address.
Signed-off-by: NTodor Tomov <todor.tomov@linaro.org>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

We initially introduced a spin lock to ensure that the VPU registers
are not accessed concurrently between our setup function and IRQ
handler. The V4L2 M2M API ensures that only one decoding job runs at a
time, so the interrupt signaling the end of decoding will not occur
while the next picture is being configured.

Spurious interrupts are taken care of in the handler, by checking that
we have a valid M2M context and a decoding status available before
marking the buffers as done.

In addition, holding a spin lock could be problematic if non-atomic
operations are required in the setup process for future codec support.

As a result, remove the global IRQ spin lock.
Signed-off-by: NPaul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

There are spelling mistakes in dev_dbg messages, fix them.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Acked-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

There is a spelling mistake in a pvr2_trace trace message, fix it.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Add support for the third loop filter mode
V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED_AT_SLICE_BOUNDARY,
and fix V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_ALPHA and
V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_BETA controls.

The filter offset controls are signed values in the -6 to 6 range and
are stored into the slice header fields slice_alpha_c0_offset_div2 and
slice_beta_offset_div2. The actual filter offsets FilterOffsetA/B are
double their value, in range of -12 to 12.

Rename variables to more closely match the nomenclature in the H.264
specification.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The venus and s5p-mfc drivers add the loop filter alpha/beta offset
controls V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_ALPHA/BETA with a range of
-6 to +6, inclusive. This is exactly the range specified for the slice
header fields slice_alpha_c0_offset_div2 and slice_beta_offset_div2,
which store half the actual filter offsets FilterOffsetA/B.

Clarify that this control contains the halved offsets.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Trace points are much more efficient than debug messages for intensive
tracing and could be conveniently enabled / disabled dynamically, hence
let's replace debug messages with the trace points. This also makes
code a bit cleaner.
Signed-off-by: NDmitry Osipenko <digetx@gmail.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

When client requests for a keyframe, set the property
to hardware to generate the sync frame.
Signed-off-by: NMalathi Gottam <mgottam@codeaurora.org>
Acked-by: NTomasz Figa <tfiga@chromium.org>
Acked-by: NStanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Interrupt is always present throughout life time of driver and
there is no dma element move this buffer to private area of driver.
Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The interrupt urb is killed but never freed add the function
Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

usb_control_msg returns in case of a successfully sent message the number
of sent bytes as a positive number. Don't use this value as a return value
for stk_camera_read_reg, as a non-zero return value is used as an error
condition in some cases when stk_camera_read_reg is called.
Signed-off-by: NAndreas Pape <ap@ca-pape.de>
Reviewed-by: NKieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The ASUS A6VM notebook has a built in stk11xx webcam which is mounted
in a way that the video is vertically and horizontally flipped.
Therefore this notebook is added to the special handling in the driver
to automatically flip the video into the correct orientation.
Signed-off-by: NAndreas Pape <ap@ca-pape.de>
Reviewed-by: NKieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

As reported by checkpatch.pl, some function calls have a wrong
alignment.
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Add a mem2mem driver for the VPU available on Rockchip SoCs.
Currently only JPEG encoding is supported, for RK3399 and RK3288
platforms.
Signed-off-by: NEzequiel Garcia <ezequiel@collabora.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: fix checkpatch.pl alignment warning]
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Add devicetree binding documentation for Rockchip Video Processing
Unit IP.
Reviewed-by: NRob Herring <robh@kernel.org>
Signed-off-by: NEzequiel Garcia <ezequiel@collabora.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Merge from Upstream after the latest media fixes branch, because we
need one patch that it is there.

* commit '0072a0c1': (1108 commits)
  ide: Change to use DEFINE_SHOW_ATTRIBUTE macro
  ide: pmac: add of_node_put()
  drivers/tty: add missing of_node_put()
  drivers/sbus/char: add of_node_put()
  sbus: char: add of_node_put()
  Linux 4.20-rc5
  PCI: Fix incorrect value returned from pcie_get_speed_cap()
  MAINTAINERS: Update linux-mips mailing list address
  ocfs2: fix potential use after free
  mm/khugepaged: fix the xas_create_range() error path
  mm/khugepaged: collapse_shmem() do not crash on Compound
  mm/khugepaged: collapse_shmem() without freezing new_page
  mm/khugepaged: minor reorderings in collapse_shmem()
  mm/khugepaged: collapse_shmem() remember to clear holes
  mm/khugepaged: fix crashes due to misaccounted holes
  mm/khugepaged: collapse_shmem() stop if punched or truncated
  mm/huge_memory: fix lockdep complaint on 32-bit i_size_read()
  mm/huge_memory: splitting set mapping+index before unfreeze
  mm/huge_memory: rename freeze_page() to unmap_page()
  initramfs: clean old path before creating a hardlink
  ...

This file is a recent addition to media docs, and it is now the
only one without any license.

While the best is to dual-license with GFDL and GPL, it is,
at least, compatible with GFDL, as this is a requirement to be
part of the media uAPI docs.

So, add such license to it.
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

All Documentation files outside the uAPI are all licensed with,
at least, GPL 2.0. So, mark them as such.

The ondes at media/uapi are at least GFDL 1.1+.
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Along the time, several image files got replaced by me by
new ones with similar contents.

As those were not simple conversions, dual-license them.
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

All those files are under GFDL 1.1 or later, with no invariant sections.
Tag them as such.
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

This is not needed there. Also, the same UTF-8 encoding should
be used on all documents.
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The GNU Free Documentation License allows for a work to specify
Invariant Sections that are not allowed to be modified.  (Debian
considers that this makes such works non-free.)

The Linux Media Infrastructure userspace API documentation does not
specify any such sections, but it also doesn't say there are none (as
is recommended by the license text).  Make it explicit that there are
none.
Signed-off-by: NAaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NJohannes Stezenbach <js@linuxtv.org>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMarcus Metzler <mocm@metzlerbros.de>
Signed-off-by: NMichael Ira Krufky <mkrufky@gmail.com>
Signed-off-by: NRalph Metzler <rjkm@metzlerbros.de>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NSylwester Nawrocki <snawrocki@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Change variables names in vicodec-core.c to *_src *_dst
to improve readability
Signed-off-by: NDafna Hirschfeld <dafna3@gmail.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

There is no need to hold the list_lock when initializing the local
asd_list of a notifier. Remove the lock handling to simplify the code
and remove a potential LOCKDEP warning.
Signed-off-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reported-by: NJacopo Mondi <jacopo@jmondi.org>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The autoexposure setup in the 1080p init array is redundant with the
default value of the sensor.

Remove it.
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx6dq
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Now that we have everything in place to compute the clock rate at runtime,
we can enable the 60fps framerate for the mode we tested it with.
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx6dq
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The current code uses an algorithm to clamp the FPS values and round them
to the closest supported one that isn't really allows to be extended to
more than two values.

Rework it a bit to make it much easier to extend the amount of FPS options
we support.
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx6dq
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

In the ov5640_try_frame_interval function, the ret variable actually holds
the frame rate index to use, which is represented by the enum
ov5640_frame_rate in the driver.

Make it more obvious.
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx6dq
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Now that we have moved the clock generation logic out of the bytes array,
these arrays are identical between the 15fps and 30fps variants.

Remove the duplicate entries, and convert the code accordingly.
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx6dq
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The pixel clock rates were introduced to report the initially static clock
rate.

Since this is now handled dynamically, we can remove them entirely.
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx6dq
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The clock rate, while hardcoded until now, is actually a function of the
resolution, framerate and bytes per pixel. Now that we have an algorithm to
adjust our clock rate, we can select it dynamically when we change the
mode.

This changes a bit the clock rate being used, with the following effect:

+------+------+------+------+-----+-----------------+----------------+-----------+
| Hact | Vact | Htot | Vtot | FPS | Hardcoded clock | Computed clock | Deviation |
+------+------+------+------+-----+-----------------+----------------+-----------+
|  640 |  480 | 1896 | 1080 |  15 |        56000000 |       61430400 | 8.84 %    |
|  640 |  480 | 1896 | 1080 |  30 |       112000000 |      122860800 | 8.84 %    |
| 1024 |  768 | 1896 | 1080 |  15 |        56000000 |       61430400 | 8.84 %    |
| 1024 |  768 | 1896 | 1080 |  30 |       112000000 |      122860800 | 8.84 %    |
|  320 |  240 | 1896 |  984 |  15 |        56000000 |       55969920 | 0.05 %    |
|  320 |  240 | 1896 |  984 |  30 |       112000000 |      111939840 | 0.05 %    |
|  176 |  144 | 1896 |  984 |  15 |        56000000 |       55969920 | 0.05 %    |
|  176 |  144 | 1896 |  984 |  30 |       112000000 |      111939840 | 0.05 %    |
|  720 |  480 | 1896 |  984 |  15 |        56000000 |       55969920 | 0.05 %    |
|  720 |  480 | 1896 |  984 |  30 |       112000000 |      111939840 | 0.05 %    |
|  720 |  576 | 1896 |  984 |  15 |        56000000 |       55969920 | 0.05 %    |
|  720 |  576 | 1896 |  984 |  30 |       112000000 |      111939840 | 0.05 %    |
| 1280 |  720 | 1892 |  740 |  15 |        42000000 |       42002400 | 0.01 %    |
| 1280 |  720 | 1892 |  740 |  30 |        84000000 |       84004800 | 0.01 %    |
| 1920 | 1080 | 2500 | 1120 |  15 |        84000000 |       84000000 | 0.00 %    |
| 1920 | 1080 | 2500 | 1120 |  30 |       168000000 |      168000000 | 0.00 %    |
| 2592 | 1944 | 2844 | 1944 |  15 |        84000000 |      165862080 | 49.36 %   |
+------+------+------+------+-----+-----------------+----------------+-----------+

Only the 640x480, 1024x768 and 2592x1944 modes are significantly affected
by the new formula.

In this case, 640x480 and 1024x768 are actually fixed by this change.
Indeed, the sensor was sending data at, for example, 27.33fps instead of
30fps. This is -9%, which is roughly what we're seeing in the array.
Testing these modes with the new clock setup actually fix that error, and
data are now sent at around 30fps.

2592x1944, on the other hand, is probably due to the fact that this mode
can only be used using MIPI-CSI2, in a two lane mode, and never really
tested with a DVP bus.
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx6dq
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The MIPI divider is also cleared as part of the clock setup sequence, so we
can remove that code.
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx6dq
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The OV5640_SCLK2X_ROOT_DIVIDER_DEFAULT and OV5640_SCLK_ROOT_DIVIDER_DEFAULT
defines represent exactly the same setup, and are at the same value, than
the more consistent with the rest of the driver OV5640_SCLK2X_ROOT_DIV and
OV5640_SCLK_ROOT_DIV.

Remove them.
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx6dq
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Part of the hardcoded initialization sequence is to set up the proper clock
dividers. However, this is now done dynamically through proper code and as
such, the static one is now redundant.

Let's remove it.
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx6dq
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The clock structure for the PCLK is quite obscure in the documentation, and
was hardcoded through the bytes array of each and every mode.

This is troublesome, since we cannot adjust it at runtime based on other
parameters (such as the number of bytes per pixel), and we can't support
either framerates that have not been used by the various vendors, since we
don't have the needed initialization sequence.

We can however understand how the clock tree works, and then implement some
functions to derive the various parameters from a given rate. And now that
those parameters are calculated at runtime, we can remove them from the
initialization sequence.

The modes also gained a new parameter which is the clock that they are
running at, from the register writes they were doing, so for now the switch
to the new algorithm should be transparent.
Co-Developed-by: NJacopo Mondi <jacopo+renesas@jmondi.org>
Tested-by: Adam Ford <aford173@gmail.com> #imx6dq
Signed-off-by: NJacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The set_fmt operations updates the sensor format only when the image format
is changed. When only the image sizes gets changed, the format do not get
updated causing the sensor to always report the one that was previously in
use.

Without this patch, updating frame size only fails:
  [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:srgb xfer:srgb ...]

With this patch applied:
  [fmt:UYVY8_2X8/1024x768@1/30 field:none colorspace:srgb xfer:srgb ...]

Fixes: 6949d864 ("media: ov5640: do not change mode if format or frame interval is unchanged")
Signed-off-by: NJacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx6 w/ CSI2 interface on 4.19.6 and 4.20-RC5
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The chip can be configured to output data transitions on the
rising or falling edge of PIXCLK (Datasheet R58:1[9]), default is on the
falling edge.

Parsing the fw-node is made in a subfunction to bundle all (future)
dt-parsing / fw-parsing stuff.

[m.grzeschik@pengutronix.de: Fix inverting clock. INV_PIX_CLOCK bit is set
 per default. Set bit to 0 (enable mask bit without value) to enable
 falling edge sampling.]
[m.felsch@pengutronix.de: use fwnode helpers]
[m.felsch@pengutronix.de: mv fw parsing into own function]
[m.felsch@pengutronix.de: adapt commit msg]
[sakari.ailus@linux.intel.com: V4L2 API usage changes to compile
 on media tree master]
Signed-off-by: NEnrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: NMichael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: NMarco Felsch <m.felsch@pengutronix.de>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Add the pclk-sample property to the list of optional properties
for the mt9m111 camera sensor.
Signed-off-by: NMarco Felsch <m.felsch@pengutronix.de>
Reviewed-by: NRob Herring <robh@kernel.org>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Replace the vague binding by a more verbose. Remove the remote property
from the example since the driver don't support such a property. Also
remove the bus-width property from the endpoint since the driver don't
take care of it.
Signed-off-by: NMarco Felsch <m.felsch@pengutronix.de>
Reviewed-by: NRob Herring <robh@kernel.org>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

This patch implements the framerate selection using the skipping and
readout power-modi features. The power-modi cut the framerate by half
and each context has an independent selection bit. The same applies to
the 2x skipping feature.
Signed-off-by: NMichael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: NMarco Felsch <m.felsch@pengutronix.de>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>