The C-Media CM6533 is a USB audio chip featuring it's jack detection
capability.The device originates an interrupt transfer via HID interface each
time when a jack event occurs.  The purpose of this patch is to handle hid raw
events to keep the operating system informed of user interactions.
Signed-off-by: NBen Chen <ben_chen@bizlinktech.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Pull HID updates from Jiri Kosina:

 - appoint Benjamin Tissoires as co-maintainer / designated reviewer

 - sysfs report_descriptor visibility fix for unclaimed devices, from
   Andy Lutomirski

 - suspend/resume fixes for Sony driver from Frank Praznik

 - IRQ deadlock fix from Ioan-Adrian Ratiu

 - hid-i2c fixes affecting (at least) Yoga 900 from Mika Westerberg and
   Srinivas Pandruvada

 - a lot of new device support (especially, but not limited to, Wacom)
   and assorted small misc fixes

 - almost complete G920 support; the only bit that is missing is
   switching the device to HID mode automatically; Simon Wood and Michal
   Maly are working on it.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (46 commits)
  Revert "INPUT: xpad: switch Logitech G920 Wheel into HID mode"
  HID: sensor-hub: Add quirk for Lenovo Yoga 900 with ITE Chips
  HID: Add new PID for Microchip Pick16F1454
  HID: wacom: Use correct report to query pen ID from INTUOSHT2 devices
  HID: i2c-hid: Prevent sending reports from racing with device reset
  HID: use kobj_to_dev()
  HID: wiimote: use dev_to_wii()
  HID: add a new helper to_hid_driver()
  HID: use to_hid_device()
  HID: move to_hid_device() to hid.h
  HID: usbhid: use to_usb_device
  HID: corsair: Convert to use module_hid_driver
  HID: input: ignore the battery in OKLICK Laser BTmouse
  HID: wacom: Fix pad button range for CINTIQ_COMPANION_2
  HID: wacom: Fix touchring value reporting
  HID: wacom: Report 'strip2' values in ABS_RY
  HID: wacom: Limit touchstrip data to 13 bits
  HID: wacom: bitwise vs logical ORs
  HID: wacom: Apply lowres quirk to BAMBOO_TOUCH devices
  HID: enable hid device to suspend/resume asynchronously
  ...

Pull NFS client updates from Trond Myklebust:
 "Highlights include:

  Stable fixes:
   - Fix a regression in the SunRPC socket polling code
   - Fix the attribute cache revalidation code
   - Fix race in __update_open_stateid()
   - Fix an lo->plh_block_lgets imbalance in layoutreturn
   - Fix an Oopsable typo in ff_mirror_match_fh()

  Features:
   - pNFS layout recall performance improvements.
   - pNFS/flexfiles: Support server-supplied layoutstats sampling period

  Bugfixes + cleanups:
   - NFSv4: Don't perform cached access checks before we've OPENed the
     file
   - Fix starvation issues with background flushes
   - Reclaim writes should be flushed as unstable writes if there are
     already entries in the commit lists
   - Various bugfixes from Chuck to fix NFS/RDMA send queue ordering
     problems
   - Ensure that we propagate fatal layoutget errors back to the
     application
   - Fixes for sundry flexfiles layoutstats bugs
   - Fix files/flexfiles to not cache invalidated layouts in the DS
     commit buckets"

* tag 'nfs-for-4.5-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (68 commits)
  NFS: Fix a compile warning about unused variable in nfs_generic_pg_pgios()
  NFSv4: Fix a compile warning about no prototype for nfs4_ioctl()
  NFS: Use wait_on_atomic_t() for unlock after readahead
  SUNRPC: Fixup socket wait for memory
  NFSv4.1/pNFS: Cleanup constify struct pnfs_layout_range arguments
  NFSv4.1/pnfs: Cleanup copying of pnfs_layout_range structures
  NFSv4.1/pNFS: Cleanup pnfs_mark_matching_lsegs_invalid()
  NFSv4.1/pNFS: Fix a race in initiate_file_draining()
  NFSv4.1/pNFS: pnfs_error_mark_layout_for_return() must always return layout
  NFSv4.1/pNFS: pnfs_mark_matching_lsegs_return() should set the iomode
  NFSv4.1/pNFS: Use nfs4_stateid_copy for copying stateids
  NFSv4.1/pNFS: Don't pass stateids by value to pnfs_send_layoutreturn()
  NFS: Relax requirements in nfs_flush_incompatible
  NFSv4.1/pNFS: Don't queue up a new commit if the layout segment is invalid
  NFS: Allow multiple commit requests in flight per file
  NFS/pNFS: Fix up pNFS write reschedule layering violations and bugs
  SUNRPC: Fix a missing break in rpc_anyaddr()
  pNFS/flexfiles: Fix an Oopsable typo in ff_mirror_match_fh()
  NFS: Fix attribute cache revalidation
  NFS: Ensure we revalidate attributes before using execute_ok()
  ...

Pull vfs fix from Al Viro:
 "Don't put symlink bodies in pagecache into highmem"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  Make sure that highmem pages are not added to symlink page cache

inode_nohighmem() is sufficient to make sure that page_get_link()
won't try to allocate a highmem page.  Moreover, it is sufficient
to make sure that page_symlink/__page_symlink won't do the same
thing.  However, any filesystem that manually preseeds the symlink's
page cache upon symlink(2) needs to make sure that the page it
inserts there won't be a highmem one.

Fortunately, only nfs and shmem have run afoul of that...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Pull x86 fixes from Ingo Molnar:
 "Misc changes:
   - fix lguest bug
   - fix /proc/meminfo output on certain configs
   - fix pvclock bug
   - fix reboot on certain iMacs by adding new reboot quirk
   - fix bootup crash
   - fix FPU boot line option parsing
   - add more x86 self-tests
   - small cleanups, documentation improvements, etc"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu/amd: Remove an unneeded condition in srat_detect_node()
  x86/vdso/pvclock: Protect STABLE check with the seqcount
  x86/mm: Improve switch_mm() barrier comments
  selftests/x86: Test __kernel_sigreturn and __kernel_rt_sigreturn
  x86/reboot/quirks: Add iMac10,1 to pci_reboot_dmi_table[]
  lguest: Map switcher text R/O
  x86/boot: Hide local labels in verify_cpu()
  x86/fpu: Disable AVX when eagerfpu is off
  x86/fpu: Disable MPX when eagerfpu is off
  x86/fpu: Disable XGETBV1 when no XSAVE
  x86/fpu: Fix early FPU command-line parsing
  x86/mm: Use PAGE_ALIGNED instead of IS_ALIGNED
  selftests/x86: Disable the ldt_gdt_64 test for now
  x86/mm/pat: Make split_page_count() check for empty levels to fix /proc/meminfo output
  x86/boot: Double BOOT_HEAP_SIZE to 64KB
  x86/mm: Add barriers and document switch_mm()-vs-flush synchronization

Pull timer fixes from Ingo Molnar:
 "Three clocksource driver fixes"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/drivers/vt8500: Increase the minimum delta
  clocksource/drivers/fsl_ftm_timer: Fix CLKSRC_MMIO dependency
  clocksource/drivers: Fix dependencies for !HAS_IOMEM archs

Pull perf fixes from Ingo Molnar:
 "Tooling fixes, the biggest patch is one that decouples the kernel's
  list.h from tooling list.h"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  perf tools: Fallback to srcdir/Documentation/tips.txt
  perf ui/tui: Print helpline message as is
  perf tools: Set and pass DOCDIR to builtin-report.c
  perf tools: Add file_only config option to strlist
  perf tools: Add more usage tips
  perf record: Add --buildid-all option
  tools subcmd: Add missing NORETURN define for parse-options.h
  tools: Fix formatting of the "make -C tools" help message
  tools: Make list.h self-sufficient
  perf tools: Fix mmap2 event allocation in synthesize code
  perf stat: Fix recort_usage typo
  perf test: Reset err after using it hold errcode in hist testcases
  perf test: Fix false TEST_OK result for 'perf test hist'
  tools build: Add BPF feature check to test-all
  perf bpf: Fix build breakage due to libbpf
  tools: Move Makefile.arch from perf/config to tools/scripts
  perf tools: Fix PowerPC native building
  perf tools: Fix phony build target for build-test
  perf tools: Add -lutil in python lib list for broken python-config
  perf tools: Add missing sources to perf's MANIFEST
  ...

Pull i2c updates from Wolfram Sang:
 "Quite some driver updates:
   - piix4 can now handle multiplexed adapters
   - brcmstb, xlr, eg20t, designware drivers support more SoCs
   - emev2 gained i2c slave support
   - img-scb and rcar got bigger refactoring to remove issues
   - lots of common driver updates

  i2c core changes:
   - new quirk flag when an adapter does not support clock stretching,
     so clients can be configured to avoid that if possible
   - added a helper function to retrieve timing parameters from firmware
     (with rcar being the first user)
   - "multi-master" DT binding added so drivers can adapt to this
     setting (like disabling PM to keep arbitration working)
   - RuntimePM for the logical adapter device is now always enabled by
     the core to ensure propagation from childs to the parent (the HW
     device)
   - new macro builtin_i2c_driver to reduce boilerplate"

* 'i2c/for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (70 commits)
  i2c: create builtin_i2c_driver to avoid registration boilerplate
  i2c: imx: fix i2c resource leak with dma transfer
  dt-bindings: i2c: eeprom: add another EEPROM device
  dt-bindings: move I2C eeprom descriptions to the proper file
  i2c: designware: Do not require clock when SSCN and FFCN are provided
  DT: i2c: trivial-devices: Add Epson RX8010 and MPL3115
  i2c: s3c2410: remove superfluous runtime PM calls
  i2c: always enable RuntimePM for the adapter device
  i2c: designware: retry transfer on transient failure
  i2c: ibm_iic: rename i2c_timings struct due to clash with generic version
  i2c: designware: Add support for AMD Seattle I2C
  i2c: imx: Remove unneeded comments
  i2c: st: use to_platform_device()
  i2c: designware: use to_pci_dev()
  i2c: brcmstb: Adding support for CM and DSL SoCs
  i2c: mediatek: fix i2c multi transfer issue in high speed mode
  i2c: imx: improve code readability
  i2c: imx: Improve message log when DMA is not used
  i2c: imx: add runtime pm support to improve the performance
  i2c: imx: init bus recovery info before adding i2c adapter
  ...

Pull DeviceTree updates from Rob Herring:

 - Rework and export the changeset API to make it available to users
   other than DT overlays

 - ARM secure devices binding

 - OCTEON USB binding

 - Clean-up of various SRAM binding docs

 - Various other binding doc updates

* tag 'devicetree-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (21 commits)
  drivers/of: Export OF changeset functions
  Fix documentation for adp1653 DT
  ARM: psci: Fix indentation in DT bindings
  of/platform: export of_default_bus_match_table
  of/unittest: Show broken behaviour in the platform bus
  of: fix declaration of of_io_request_and_map
  of/address: replace printk(KERN_ERR ...) with pr_err(...)
  of/irq: optimize device node matching loop in of_irq_init()
  dt-bindings: tda998x: Document the required 'port' node.
  net/macb: bindings doc: Merge cdns-emac to macb
  dt-bindings: Misc fix for the ATH79 DDR controllers
  dt-bindings: Misc fix for the ATH79 MISC interrupt controllers
  Documentation: dt: Add bindings for Secure-only devices
  dt-bindings: ARM: add arm,cortex-a72 compatible string
  ASoC: Atmel: ClassD: add GCK's parent clock in DT binding
  DT: add Olimex to vendor prefixes
  Documentation: fsl-quadspi: Add fsl,ls1021-qspi compatible string
  Documentation/devicetree: document OCTEON USB bindings
  usb: misc: usb3503: Describe better how to bind clock to the hub
  dt-bindings: Consolidate SRAM bindings from all vendors
  ...

Pull MFD updates from Lee Jones:
 "New Device Support:
   - Add support for s2mps15; sec-core
   - Add support for Lewisburg; lpc_ich
   - Add support for cs47l24 and wm1831; arizona

  New Functionality:
   - Allow user to select syscon register width; syscon

  Fix-ups:
   - Lots of Checkpatch fixes
   - Rename -pmic/-regulator; s2mps11
   - Build driver components into a single module; wm8994-*
   - Better handing of IRQ during suspend/resume; as3722
   - Constify things; da903x
   - Remove unused code; ab8500-core
   - Improve error handing; qcom_rpm
   - Simplify code: wm831x-otp, sta2x11-mfd
   - Improve locking; cros_ec_spi
   - Fix incorrect DT binding filename reference; arizona, palmas,
     snps-dwapb-gpio, wm8994

  Bug Fixes:
   - Fix broken SYSFS 'show ID' call; wm831x-otp
   - Protect reads from non-existent registers; qcom-spmi-pmic
   - Repair build warnings; as3722
   - Fix IRQ request ordering; arizona-irq
   - Ensure return value is boolean; ucb1x00-core, tps65010, tc6393xb,
     htc-egpio, dm355evm_msp, asic3"

* tag 'mfd-for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (58 commits)
  mfd: davinci_voicecodec: Remove pointless 'out of memory' error message
  mfd: da9052-irq: Fix trivial 'space before comma' error
  mfd: da9052-i2c: Fix tabbing/whitespace issue
  mfd: da903x: Fix white space and split string issues
  mfd: cs5535-mfd: Add missing line spacing and make local array static
  mfd: cros_ec_spi: Repair comparison ordering issue
  mfd: cros_ec_i2c: Fix trivial 'tabs before spaces' whitespace issue.
  mfd: asic3: Fix a plethora of Checkpatch errors and warnings
  mfd: as3711: Repair OOM and 'line over 80 chars' formatting warnings
  mfd: arizona-i2c: Add blank line formatting after declaration
  mfd: arizona-core: msleep() is unreliable for anything <20ms use usleep_range() instead
  mfd: adp5520: Some trivial 'no space before tab' fixes
  mfd: ab8500-sysctrl: Fix Constify, printk => pr_info and formatting issues
  mfd: ab8500-gpadc: Squash a whole bunch of Checkpatch warnings and one error
  mfd: ab8500-debugfs: Clean-up non-conforming commenting and print formatting
  mfd: ab8500-core: Fix many warnings reported by Checkpatch
  mfd: ab2100-otp: Remove pointless 'out of memory' error message
  mfd: ab3100-core.c: Fix multiple warnings reported by Checkpatch
  mfd: aat2870-core: Remove unnecessary 'out of memory' message
  mfd: 88pm860x-core: Fix commenting and declaration spacing
  ...

Pull power supply and reset updates from Sebastian Reichel:
 "I have mostly fixes in the power-supply tree for the 4.5 kernel.  I
  should mention, that the top-most commit has not been in next, but
  it's a fix changing only a single register offset.

  Summary:

   - uncouple CONFIG_POWER_RESET from CONFIG_POWER_SUPPLY

   - misc fixes"

* tag 'for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
  power: bq27xxx_battery: Fix bq27541 AveragePower register address
  power: test_power: correctly handle empty writes
  power: generic-adc-battery: use to_delayed_work
  power: isp1704_charger: Fix isp1704_write() definition
  power: bq27xxx: fix register numbers of bq27500
  power: bq27xxx: fix reading for bq27000 and bq27010
  power: Fix unmet dependency on POWER_SUPPLY by POWER_RESET by uncoupling them
  power: bq27xxx_battery: Reorganize I2C into a module
  power: bq27xxx: don't fill system log by missing battery
  power: max8903_charger: set IRQF_ONESHOT if no primary handler is specified
  power/reset: at91-reset: add missing of_node_put
  power: ds2782_battery: constify ds278x_battery_ops structure
  power: bq2415x_charger: Delete unnecessary checks before the function call "of_node_put"

Pull HSI updates from Sebastian Reichel:
 "Misc fixes"

* tag 'hsi-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
  HSI: omap_ssi_port: fix handling of_get_named_gpio result
  HSI: omap_ssi: fix handling ida_simple_get result
  HSI: Remove struct hsi_client private fields from kernel-doc

Pull backlight updates from Lee Jones:
  Fix-ups:
   - Take heed of GPIO default-on requests; gpio_backlight
   - Enable DT probing; tps65217_bl

  Bug Fixes:
   - Free resources in error path; pwm_bl
   - Fix uninitialised variable warning; adp8860_bl, adp8870_bl
   - Protect unconditional DT look-ups from non-DT platforms; pwm_bl
   - Fix backlight flicker; pwm_bl

* tag 'backlight-for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: pwm_bl: Free PWM requested by legacy API on error path
  backlight: adp8860: Fix another uninitialized variable use
  backlight: gpio-backlight: Use default-on on GPIO request
  backlight: pwm_bl: Fix broken PWM backlight for non-dt platforms
  backlight: tps65217_bl: Add MODULE_DEVICE_TABLE
  backlight: pwm_bl: Avoid backlight flicker when probed from DT
  backlight: adp88x0: Fix uninitialized variable use

Merge branches 'for-4.4/upstream-fixes', 'for-4.5/async-suspend', 'for-4.5/container-of-cleanups', 'for-4.5/core', 'for-4.5/i2c-hid', 'for-4.5/logitech', 'for-4.5/multitouch', 'for-4.5/sony', 'for-4.5/upstream' and 'for-4.5/wacom' into for-linus

Originally we calculated ht_nodeid as "ht_nodeid = apicid -
boot_cpu_id;" so presumably it could be negative.

But after commit:

  01aaea1a ('x86: introduce initial apicid')

we use c->initial_apicid which is an unsigned short and thus always >= 0.

It causes a static checker warning to test for impossible
conditions so let's remove it.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Hector Marco-Gisbert <hecmargi@upv.es>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Link: http://lkml.kernel.org/r/20160113123940.GE19993@mwandaSigned-off-by: NIngo Molnar <mingo@kernel.org>

WARNING: Possible unnecessary 'out of memory' message
+       if (!davinci_vc) {
+               dev_dbg(&pdev->dev,

total: 0 errors, 1 warnings, 154 lines checked
Signed-off-by: NLee Jones <lee.jones@linaro.org>

ERROR: space prohibited before that ',' (ctx:WxW)
+       da9052_free_irq(da9052, DA9052_IRQ_ADC_EOM , da9052);

total: 1 errors, 0 warnings, 290 lines checked

Cc: Support Opensource <support.opensource@diasemi.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

WARNING: suspect code indent for conditional statements (8, 24)
+       if (!i2c_safe_reg(reg))
+                       return regmap_read(da9052->regmap,

total: 0 errors, 1 warnings, 226 lines checked

Cc: Support Opensource <support.opensource@diasemi.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

While we're at it, let's also match the MODULE_LICENSE with the header.

WARNING: please, no space before tabs
+ * ^IMike Rapoport <mike@compulab.co.il>$

WARNING: please, no space before tabs
+ * ^IEric Miao <eric.miao@marvell.com>$

WARNING: quoted string split across lines
+MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>"
+             "Mike Rapoport <mike@compulab.co.il>");

total: 0 errors, 3 warnings, 574 lines checked

Cc: Support Opensource <support.opensource@diasemi.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

WARNING: Missing a blank line after declarations
+       struct resource *res;
+       res = platform_get_resource(pdev, IORESOURCE_IO, 0);

WARNING: char * array declaration might be better as static const
+       const char *acpi_clones[] = { "olpc-xo1-pm-acpi", "olpc-xo1-sci-acpi" };

total: 0 errors, 2 warnings, 192 lines checked
Signed-off-by: NLee Jones <lee.jones@linaro.org>

WARNING: Comparisons should place the constant on the right side of the test
+       BUG_ON(EC_MSG_PREAMBLE_COUNT > ec_dev->din_size);

WARNING: Comparisons should place the constant on the right side of the test
+       BUG_ON(EC_MSG_PREAMBLE_COUNT > ec_dev->din_size);

total: 0 errors, 2 warnings, 731 lines checked
Signed-off-by: NLee Jones <lee.jones@linaro.org>

ERROR: code indent should use tabs where possible
+ ^Iec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL);$

WARNING: please, no space before tabs
+ ^Iec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL);$

WARNING: please, no spaces at the start of a line
+ ^Iec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL);$

total: 1 errors, 2 warnings, 366 lines checked
Signed-off-by: NLee Jones <lee.jones@linaro.org>

ERROR: Macros with complex values should be enclosed in parentheses
+#define INIT_CDEX(_name, _rate)        \
+       [ASIC3_CLOCK_##_name] = {               \
+               .cdex = CLOCK_CDEX_##_name,     \
+               .rate = _rate,                  \
+       }

WARNING: line over 80 characters
+                                                           ASIC3_GPIO_INT_STATUS);

WARNING: void function return statements are not generally useful
+       return;
+}

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+       msleep(1);

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+       msleep(1);

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+       msleep(1);

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+       msleep(1);

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+       msleep(1);

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+       msleep(1);

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+               msleep(1);
WARNING: line over 80 characters
+               asic->tmio_cnf = ioremap((ASIC3_SD_CONFIG_BASE >> asic->bus_shift) +

WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then p
r_err(...  to printk(KERN_ERR ...
+               printk(KERN_ERR "kzalloc failed\n");

WARNING: Possible unnecessary 'out of memory' message
+       if (asic == NULL) {
+               printk(KERN_ERR "kzalloc failed\n");

WARNING: Missing a blank line after declarations
+       int retval = 0;
+       retval = platform_driver_probe(&asic3_device_driver, asic3_probe);

total: 1 errors, 13 warnings, 1081 lines checked
Signed-off-by: NLee Jones <lee.jones@linaro.org>

WARNING: Possible unnecessary 'out of memory' message
+               if (!pdata) {
+                       dev_err(&client->dev, "Failed to allocate pdata\n");

WARNING: Possible unnecessary 'out of memory' message
+       if (!as3711) {
+               dev_err(&client->dev, "Memory allocation failed\n");

WARNING: line over 80 characters
+               dev_err(&client->dev, "regmap initialization failed: %d\n", ret);

WARNING: line over 80 characters
+       /* We can reuse as3711_subdevs[], it will be copied in mfd_add_devices() */

WARNING: line over 80 characters
+               as3711_subdevs[AS3711_REGULATOR].platform_data = &pdata->regulator;

WARNING: line over 80 characters
+               as3711_subdevs[AS3711_REGULATOR].pdata_size = sizeof(pdata->regulator);

WARNING: line over 80 characters
+               as3711_subdevs[AS3711_BACKLIGHT].platform_data = &pdata->backlight;

WARNING: line over 80 characters
+               as3711_subdevs[AS3711_BACKLIGHT].pdata_size = sizeof(pdata->backlight);

total: 0 errors, 8 warnings, 236 lines checked
Signed-off-by: NLee Jones <lee.jones@linaro.org>

WARNING: Missing a blank line after declarations
+       struct arizona *arizona = dev_get_drvdata(&i2c->dev);
+       arizona_dev_exit(arizona);

total: 0 errors, 1 warnings, 120 lines checked

Cc: patches@opensource.wolfsonmicro.com
Acked-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+               msleep(1);

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+                       msleep(5);

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+               msleep(1);

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+               msleep(1);

total: 0 errors, 4 warnings, 1407 lines checked

Cc: patches@opensource.wolfsonmicro.com
Acked-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

WARNING: please, no space before tabs
+ * ^IMike Rapoport <mike@compulab.co.il>$

WARNING: please, no space before tabs
+ * ^IEric Miao <eric.miao@marvell.com>$

WARNING: please, no space before tabs
+^I.id_table ^I= adp5520_id,$

total: 0 errors, 3 warnings, 365 lines checked

Cc: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

WARNING: char * array declaration might be better as static const
+       static char *pss[] = {"ab8500_ac", "pm2301", "ab8500_usb"};

WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then
 pr_info(...  to printk(KERN_INFO ...
+                       printk(KERN_INFO

WARNING: quoted string split across lines
+                              "Charger \"%s\" is connected with known battery."
+                              " Rebooting.\n",

WARNING: quoted string split across lines
+                                       "unable to set sysClkReq%dRfClkBuf: "
+                                       "%d\n", j + 1, ret);

total: 0 errors, 4 warnings, 199 lines checked

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

WARNING: line over 80 characters
+#define ADC_CH_IBAT_MIN                        (-6000) /* mA range measured by ADC for ib
t*/

WARNING: line over 80 characters
+#define ADC_CH_IBAT_MIN_V              (-60)   /* mV range measured by ADC for ibat*/

WARNING: suspect code indent for conditional statements (16, 20)
+               if (!strcmp(name, dev_name(gpadc->dev)))
+                   return gpadc;

WARNING: suspect code indent for conditional statements (0, 16)
+if (ad_value < 0) {
+               dev_err(gpadc->dev, "GPADC raw value failed ch: %d\n",

WARNING: quoted string split across lines
+               dev_err(gpadc->dev, "GPADC to voltage conversion failed ch:"
+                       " %d AD: 0x%x\n", channel, ad_value);

WARNING: Missing a blank line after declarations
+       int raw_data;
+       raw_data = ab8500_gpadc_double_read_raw(gpadc, channel,

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+               msleep(10);

ERROR: else should follow close brace '}'
+       }
+       else

WARNING: line over 80 characters
+                       delay_max = 10000; /* large range to optimise sleep mode */

WARNING: line over 80 characters
+                       gpadc->cal_data[ADC_INPUT_IBAT].gain = V_gain * V2A_gain;

WARNING: line over 80 characters
+       gpadc = devm_kzalloc(&pdev->dev, sizeof(struct ab8500_gpadc), GFP_KERNEL);

WARNING: Possible unnecessary 'out of memory' message
+       if (!gpadc) {
+               dev_err(&pdev->dev, "Error: No memory\n");

WARNING: space prohibited before semicolon
+       return ;

WARNING: void function return statements are not generally useful
+       return ;
+}

WARNING: quoted string split across lines
+MODULE_AUTHOR("Arun R Murthy, Daniel Willerud, Johan Palsson,"
+               "M'boumba Cedric Madianga");

total: 1 errors, 14 warnings, 1089 lines checked

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

WARNING: Block comments use a trailing */ on a separate line
+                        * not be accessed from here */

WARNING: Block comments use a trailing */ on a separate line
+                        * not be accessed from here */

WARNING: Block comments use a trailing */ on a separate line
+                                * the output is wanted in any case */

WARNING: Consecutive strings are generally better as a single string
+               "  addr=0x%08X, mask=0x%X, shift=%d" "value=0x%X\n",

total: 0 errors, 4 warnings, 3331 lines checked

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

WARNING: Block comments use a trailing */ on a separate line
+        * */

WARNING: Block comments use a trailing */ on a separate line
+        * bank on higher 8 bits and reg in lower */

WARNING: Block comments use a trailing */ on a separate line
+        * bank on higher 8 bits and reg in lower */

WARNING: suspect code indent for conditional statements (8, 24)
+       if (unlikely(*offset == 17))
+                       *offset = 24;

WARNING: suspect code indent for conditional statements (8, 24)
+       if (unlikely(*offset == 16))
+                       *offset = 25;

WARNING: suspect code indent for conditional statements (8, 24)
+       if ((i == 3) && (*offset >= 24))
+                       *offset += 2;

WARNING: ENOSYS means 'invalid syscall nr' and nothing else
+               return -ENOSYS;

WARNING: static const char * array should probably be static const char * const
+       static const char *switch_off_status[] = {

WARNING: static const char * array should probably be static const char * const
+       static const char *turn_on_status[] = {

total: 0 errors, 9 warnings, 1867 lines checked

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

WARNING: Possible unnecessary 'out of memory' message
+       if (!otp) {
+               dev_err(&pdev->dev, "could not allocate AB3100 OTP device\n");

total: 0 errors, 1 warnings, 250 lines checked

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

WARNING: Missing a blank line after declarations
+       struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
+       if (!ab3100->startup_events_read)

WARNING: Possible unnecessary 'out of memory' message
+       if (!ab3100) {
+               dev_err(&client->dev, "could not allocate AB3100 device\n");

WARNING: else is not generally useful after a break or return
+                               break;
+                       } else {

total: 0 errors, 3 warnings, 996 lines checked

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

WARNING: Possible unnecessary 'out of memory' message
+       if (!aat2870) {
+               dev_err(&client->dev,

total: 0 errors, 1 warnings, 524 lines checked
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Checkpatch output:

WARNING: Block comments use a trailing */ on a separate line
+        * - turn off */

WARNING: Missing a blank line after declarations
+       int ret;
+       ret = i2c_add_driver(&pm860x_driver);

total: 0 errors, 2 warnings, 1283 lines checked
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Specify the device tree binding for the input clocks to Arizona devices.
Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Signed-off-by: NGeliang Tang <geliangtang@163.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

The mfd/s2mpa01.txt duplicates some of the information about bindings
with old mfd/s2mps11.txt. Now common part exists entirely in
mfd/samsung,sec-core.txt so:
 - add company prefix to file name (regulator/samsung,s2mpa01.txt),
 - remove duplicated information,
 - reorganize the contents to match style of
   regulator/samsung,s2mps11.txt.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: NMark Brown <broonie@kernel.org>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

The regulator/s5m8767-regulator.txt duplicates some of the information
about bindings with old mfd/s2mps11.txt. Now common part exists entirely
in mfd/samsung,sec-core.txt so:
 - add company prefix to file name (regulator/samsung,s5m8767.txt),
 - remove duplicated information,
 - reorganize the contents to match style of
   regulator/samsung,s2mps11.txt.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: NMark Brown <broonie@kernel.org>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>