Our use of sched_clock is OK because we don't mind the side effects
of calling it and occasionally waking up on a different CPU.

When CONFIG_DEBUG_PREEMPT is on, disable preempt before calling
sched_clock() so we don't trigger a debug_smp_processor_id() warning.
Reported-by: NCody P Schafer <devel-lists@codyps.com>
Signed-off-by: NEliezer Tamir <eliezer.tamir@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is a race in neighbour code, because neigh_destroy() uses
skb_queue_purge(&neigh->arp_queue) without holding neighbour lock,
while other parts of the code assume neighbour rwlock is what
protects arp_queue

Convert all skb_queue_purge() calls to the __skb_queue_purge() variant

Use __skb_queue_head_init() instead of skb_queue_head_init()
to make clear we do not use arp_queue.lock

And hold neigh->lock in neigh_destroy() to close the race.
Reported-by: NJoe Jin <joe.jin@oracle.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixed that enh_desc value is always zero.
Due to calling order of stmmac_selec_desc_mode(), enh_desc value is always zero.
Even though mac is set to use enhanced dma descriptor, if enh_desc is zero,
functions related dma descriptor are not working correctly.
Signed-off-by: NByungho An <bh74.an@samsung.com>
Acked-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixed operator typo from & to ==.
Due to incorrect operator, the result is incorrect.
Signed-off-by: NByungho An <bh74.an@samsung.com>
Acked-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Instead of mixing printk and pr_<level> forms,
just use pr_<level>

Miscellaneous changes around these conversions:

Add a missing newline to avoid message interleaving,
coalesce formats, reflow modified lines to 80 columns.
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NIan Campbell <ian.campbell@citrix.com>
Acked-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Setup the multicast list of the net_device instead of
clearing it blindly. This restores the multicast groups
in case of a link down/up event or when resuming from
suspend.
Signed-off-by: NChristoph Muellner <christoph.muellner@theobroma-systems.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is no reason to skip ECMP lookup when oif is specified, but this implies
to check oif given by user when selecting another route.
When the new route does not match oif requirement, we simply keep the initial
one.
Spotted-by: Ndingzhi <zhi.ding@6wind.com>
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Because of commit 218774dc ("ipv6: add
anti-spoofing checks for 6to4 and 6rd") the sit driver dropped packets
for 2002::/16 destinations and sources even when configured to work as a
tunnel with fixed endpoint. We may only apply the 6rd/6to4 anti-spoofing
checks if the device is not in pointopoint mode.

This was an oversight from me in the above commit, sorry.  Thanks to
Roman Mamedov for reporting this!
Reported-by: NRoman Mamedov <rm@romanrm.ru>
Cc: David Miller <davem@davemloft.net>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

John W. Linville says:

====================
Yet one more pull request for wireless updates intended for 3.11...

For the mac80211 bits, Johannes says:

"Here we have a few memory leak fixes related to BSS struct handling
mostly from Ben, including a fix for a more theoretical problem
(associating while a BSS struct times out) from myself, a compilation
warning fix from Arend, mesh fixes from Thomas, tracking the beacon
bitrate (Alex), a bandwidth change event fix (Ilan) and some initial
work for 5/10 MHz channels from Simon."

Regarding the iwlwifi bits, Johannes says:

"Emmanuel removed some unneeded/unsupported module parameters and adds a
Bluetooth 1x1 lookup-table for some upcoming products. From Alex I have
an older patch to add low-power receive support, this depended on a
mac80211 commit that only just came in with the merge from wireless-next
I did. Ilan made beacon timings better, and Eytan added some debug
statements for thermal throttling. I have a few cleanups, a fix for a
long-standing but rare warning, and, arguably the most important patch
here, the firmware API version bump for the 7260/3160 devices."

Also included is a Bluetooth pull -- Gustavo says:

"Here goes a set of patches to 3.11. The biggest work here is from Andre Guedes
on the move of the Discovery to use the new request framework. Other than that
Johan provided a bunch of fixes to the L2CAP code. The rest are just small
fixes and clean ups."

On top of all that, there are a variety of updates and fixes to
brcmfmac, rt2x00, wil6210, ath9k, ath10k, and a few others here and
there.  This also includes a pull of the wireless tree, in order to
prevent some merge conflicts.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Openvswitch uses function from NET_IPGRE_DEMUX module.
Add Kconfig dependency to fix following compilation errors:
http://marc.info/?l=linux-netdev&m=137244035226634

CC: Jesse Gross <jesse@nicira.com>
Reported-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NPravin Shelar <pshelar@nicira.com>
Acked-by: NRandy Dunlap <rdunlap@infradead.org>
Acked-by: NJesse Gross <jesse@nicira.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A number of places treated features wrongly, listing not-supported
features instead of supported ones. Also, the get_drvinfo ethtool
callback isn't needed, and alx_get_pauseparam can be simplified.
Reported-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In two places, parts of MAC addresses are used as u32/u16
values. This can cause alignment problems, use put_unaligned
and get_unaligned to fix this.
Reported-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As suggested by Ben Hutchings, use separate fields to track
current link speed and duplex setting.
Reported-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The ring sizes should be unsigned, pointed out by Ben Hutchings.
Reported-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

That select doesn't make any sense, remove it.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

100mbit half duplex is ADVERTISED_100baseT_Half, not
ADVERTISED_10baseT_Half.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Even when alx_setup_speed_duplex() is called, we still
need to call alx_cfg_mac_flowcontrol() and set hw->flowctrl
if flow control changed.

This was a bug I accidentally introduced while simplifying
the original driver.
Reported-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the firmware supports the UPDATE_QP command, if the VF link is disabled,
block all QPs opened by the VF, by programming the UPDATE_QP command to drop
all RX & TX traffic to/from these QPs. Operates only in VST mode.
Signed-off-by: NRony Efraim <ronye@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Within VST mode, enable modifying the vlan and/or qos
for a VF without requiring unbind/rebind.

This requires firmware which supports the UPDATE_QP command.
(If the command is not available, we fall back to requiring
unbind/bind to activate these changes).

To avoid race conditions with modify-qp on QPs that are affected
by update-qp, this operation is performed on the comm_wq.

If the update operation succeeds for all the necessary QPs, a
vlan_unregister is performed for the abandoned vlan id.
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
The following batch contains Netfilter/IPVS updates for net-next,
they are:

* Enforce policy to several nfnetlink subsystem, from Daniel
  Borkmann.

* Use xt_socket to match the third packet (to perform simplistic
  socket-based stateful filtering), from Eric Dumazet.

* Avoid large timeout for picked up from the middle TCP flows,
  from Florian Westphal.

* Exclude IPVS from struct net if IPVS is disabled and removal
  of unnecessary included header file, from JunweiZhang.

* Release SCTP connection immediately under load, to mimic current
  TCP behaviour, from Julian Anastasov.

* Replace and enhance SCTP state machine, from Julian Anastasov.

* Add tweak to reduce sync traffic in the presence of persistence,
  also from Julian Anastasov.

* Add tweak for the IPVS SH scheduler not to reject connections
  directed to a server, choose a new one instead, from Alexander
  Frolkin.

* Add support for sloppy TCP and SCTP modes, that creates state
  information on any packet, not only initial handshake packets,
  from Alexander Frolkin.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The common case is that TCP/IP checksums have already been
verified, e.g. by hardware (rx checksum offload), or conntrack.

Userspace can use this flag to determine when the checksum
has not been validated yet.

If the flag is set, this doesn't necessarily mean that the packet has
an invalid checksum, e.g. if NIC doesn't support rx checksum.

Userspace that sucessfully enabled NFQA_CFG_F_GSO queue feature flag can
infer that IP/TCP checksum has already been validated if either the
SKB_INFO attribute is not present or the NFQA_SKB_CSUM_NOTVERIFIED
flag is unset.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Combine the multiple pr_debugs in bond_set_dev_addr into one pr_debug.
Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Marc Kleine-Budde says:

====================
this is a pull-request for net-next/master. It consists of three
patches by Fabio Estevam and me, which convert the flexcan transceiver
switching to DT[1] and a patch by Sachin Kamat, which cleans up the
at91_can driver a bit.

[1] These patches touch arch/arm/mach-imx, so I collected Acked-bys
from Shawn Guo and Sascha Hauer.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use standard PM state macros PCI_Dx instead of numeric 0/1/2..
Signed-off-by: NYijing Wang <wangyijing@huawei.com>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use standard PM state macros PCI_Dx instead of numeric 0/1/2..
Signed-off-by: NYijing Wang <wangyijing@huawei.com>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes the following warning introduced in e4fc408e
("packet: nlmon: virtual netlink monitoring device for packet
sockets") reported by Dan Carpenter:

warning: "drivers/net/nlmon.c:31 nlmon_is_valid_mtu()
	 warn: always true condition '(new_mtu <= ((~0 >> 1))) =>
				      (s32min-s32max <= s32max)'"

Thus, we should simply remove the test against INT_MAX. Next to that
we also need to explicitly cast the sizeof() case as the comparison
is type promoted to unsigned long so negative values are then
valid instead of invalid. While at it, this also adds a comment about
Netlink and MTUs.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDaniel Borkmann <dborkman@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Cosmetic patch to add a newline after logging the device's MACID.
Signed-off-by: NDaniel Mack <zonque@gmail.com>
Acked-by: NMugunthan V  N <mugunthanvnm@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This makes the error handling much more simpler than open-coding everything and
in addition makes the probe function smaller an tidier.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We may use nice macros to prefix our messages with proper device name.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is no much sense to mark functions inline that are going to be used in
the other compile modules.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

I tested with the AX88179 usb dongle, if without .reset_resume hook,
after S3/S4 resume you have to enable network interface or reload the
dirver module manually otherwise the network interface can not work.
Signed-off-by: NDavid Chang <dchang@suse.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Correct a typo in description of driver_info, it should be Gigabit
Signed-off-by: NDavid Chang <dchang@suse.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit d2d68ba9 (ipv4: Cache input routes in fib_info nexthops)
assmued that "locally destined, and routed packets, never trigger
PMTU events or redirects that will be processed by us".

However, it seems that tunnel devices do trigger PMTU events in certain
cases. At least ip_gre, ip6_gre, sit, and ipip do use the inner flow's
skb_dst(skb)->ops->update_pmtu to propage mtu information from the
outer flows. These can cause the inner flow mtu to be decreased. If
next hop exceptions are not consulted for pmtu, IP fragmentation will
not be done properly for these routes.

It also seems that we really need to have the PMTU information always
for netfilter TCPMSS clamp-to-pmtu feature to work properly.

So for the time being, cache separate copies of input routes for
each next hop exception.
Signed-off-by: NTimo Teräs <timo.teras@iki.fi>
Reviewed-by: NJulian Anastasov <ja@ssi.bg>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

RFC3590/RFC3810 specifies we should resend MLD reports as soon as a
valid link-local address is available.

We now use the valid_ll_addr_cnt to check if it is necessary to resend
a new report.

Changes since Flavio Leitner's version:
a) adapt for valid_ll_addr_cnt
b) resend first reports directly in the path and just arm the timer for
   mc_qrv-1 resends.
Reported-by: NFlavio Leitner <fleitner@redhat.com>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: David Stevens <dlstevens@us.ibm.com>
Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NFlavio Leitner <fbl@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

To reduce the number of unnecessary router solicitations, MLDv2 and IGMPv3
messages we need to track the number of valid (as in non-optimistic,
no-dad-failed and non-tentative) link-local addresses. Therefore, this
patch implements a valid_ll_addr_cnt in struct inet6_dev.

We now only emit router solicitations if the first link-local address
finishes duplicate address detection.

The changes for MLDv2 and IGMPv3 are in a follow-up patch.

While there, also simplify one if statement(one minor nit I made in one
of my previous patches):

if (!...)
	do();
else
	return;

<<into>>

if (...)
	return;
do();

Cc: Flavio Leitner <fbl@redhat.com>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Cc: David Stevens <dlstevens@us.ibm.com>
Suggested-by: NDavid Stevens <dlstevens@us.ibm.com>
Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: NFlavio Leitner <fbl@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem

Conflicts:
	net/wireless/nl80211.c

A simple semantic change, when a slave's MAC is cloned by the bond
master then set addr_assign_type to NET_ADDR_STOLEN instead of
NET_ADDR_SET. Also use bond_set_dev_addr() in BOND_FOM_ACTIVE mode
to change the bond's MAC address because the assign_type has to be
set properly.
Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In struct bonding there's a member called dev_addr_from_first which is
used to denote when the bond dev should clone the first slave's MAC
address but since we have netdev's addr_assign_type variable that is not
necessary. We clone the first slave's MAC each time we have a random MAC
set to the bond device. This has the nice side-effect of also fixing an
inconsistency - when the MAC address of the bond dev is set after its
creation, but prior to having slaves, it's not kept and the first slave's
MAC is cloned. The only way to keep the MAC was to create the bond device
with the MAC address set (e.g. through ip link). In all cases if the
bond device is left without any slaves - its MAC gets reset to a random
one as before.
Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We have a member called setup_by_slave in struct bonding to denote if the
bond dev has different type than ARPHRD_ETHER, but that is already denoted
in bond's netdev type variable if it was setup by the slave, so use that
instead of the member.
Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since (c05cdb1b netlink: allow large data transfers from user-space),
netlink splats if it invokes skb_clone on large netlink skbs since:

* skb_shared_info was not correctly initialized.
* skb->destructor is not set in the cloned skb.

This was spotted by trinity:

[  894.990671] BUG: unable to handle kernel paging request at ffffc9000047b001
[  894.991034] IP: [<ffffffff81a212c4>] skb_clone+0x24/0xc0
[...]
[  894.991034] Call Trace:
[  894.991034]  [<ffffffff81ad299a>] nl_fib_input+0x6a/0x240
[  894.991034]  [<ffffffff81c3b7e6>] ? _raw_read_unlock+0x26/0x40
[  894.991034]  [<ffffffff81a5f189>] netlink_unicast+0x169/0x1e0
[  894.991034]  [<ffffffff81a601e1>] netlink_sendmsg+0x251/0x3d0

Fix it by:

1) introducing a new netlink_skb_clone function that is used in nl_fib_input,
   that sets our special skb->destructor in the cloned skb. Moreover, handle
   the release of the large cloned skb head area in the destructor path.

2) not allowing large skbuffs in the netlink broadcast path. I cannot find
   any reasonable use of the large data transfer using netlink in that path,
   moreover this helps to skip extra skb_clone handling.

I found two more netlink clients that are cloning the skbs, but they are
not in the sendmsg path. Therefore, the sole client cloning that I found
seems to be the fib frontend.

Thanks to Eric Dumazet for helping to address this issue.
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>