- 23 5月, 2009 2 次提交
-
-
由 Jonas Bonn 提交于
drm_connector_init sets both the connector type and the connector type_id on the newly initialised connector. As the connector type_id is coupled to the connector type, the connector type cannot simply be modified on an initialised connector. This patch changes the order of operations on intel_sdvo_init so that the type is determined before the connector is intialised. This fixes a bug whereby the name card0-VGA-1 would be allocted to both a CRT and an SDVO connector since the SDVO connector would be initialised with type 'unknown' and hence have its type_id assigned from the wrong pool. Signed-off-by: NJonas Bonn <jonas@southpole.se> Signed-off-by: NEric Anholt <eric@anholt.net>
-
由 Ma Ling 提交于
Some new SDVO LVDS hardware doesn't have DDC available, and this should fix the display on it. Signed-off-by: NMa Ling <ling.ma@intel.com> Signed-off-by: NEric Anholt <eric@anholt.net>
-
- 09 4月, 2009 1 次提交
-
-
由 Ma Ling 提交于
Currently we detect HDMI monitor by hardware detection, but if an HDMI-DVI adapter is used to connect a DVI monitor, hardware detection will incorrectly take monitor as HDMI. HDMI spec says any device containing IEEE registration identifier will be treated as HDMI device. The patch intends to detect HDMI monitor by drm_detect_hdmi_monitor function which follows that rule. Signed-off-by: NMa Ling <ling.ma@intel.com> Signed-off-by: NEric Anholt <eric@anholt.net>
-
- 02 4月, 2009 4 次提交
-
-
由 Zhenyu Wang 提交于
This brings SDVO TV support from 2D driver, including origin fix f1ca56e17d0 and later fix 2fcf4fcccfe. Also fix wrong modeline definitions for SDVO TV. Signed-off-by: NZhenyu Wang <zhenyu.z.wang@intel.com> Signed-off-by: NEric Anholt <eric@anholt.net>
-
由 Zhenyu Wang 提交于
This brings fix commit acde0ef683 from 2D driver. Signed-off-by: NZhenyu Wang <zhenyu.z.wang@intel.com> Signed-off-by: NEric Anholt <eric@anholt.net>
-
由 Zhenyu Wang 提交于
This brings fix commit 62c0c2f5549a from 2D driver. Signed-off-by: NZhenyu Wang <zhenyu.z.wang@intel.com> Signed-off-by: NEric Anholt <eric@anholt.net>
-
由 Zhenyu Wang 提交于
Fix compile error of intel_sdvo_debug_response(), and explicit use KERN_DEBUG for printk. Signed-off-by: NZhenyu Wang <zhenyu.z.wang@intel.com> Signed-off-by: NEric Anholt <eric@anholt.net>
-
- 20 2月, 2009 1 次提交
-
-
由 Tobias Klauser 提交于
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NEric Anholt <eric@anholt.net> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
- 08 2月, 2009 1 次提交
-
-
由 Jesse Barnes 提交于
Pull in an update from the 2D driver (hopefully the last one, future work should be done here and pulled back into xf86-video-intel as needed). Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: NEric Anholt <eric@anholt.net> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
- 07 1月, 2009 1 次提交
-
-
由 Eric Anholt 提交于
This is ported directly from the userland 2D driver code. The HDMI audio bits aren't hooked up yet. Signed-off-by: NEric Anholt <eric@anholt.net> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
- 29 12月, 2008 2 次提交
-
-
由 Hannes Eder 提交于
Signed-off-by: NHannes Eder <hannes@hanneseder.net> Signed-off-by: NEric Anholt <eric@anholt.net> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Jesse Barnes 提交于
This commit adds i915 driver support for the DRM mode setting APIs. Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are supported. HDMI, DisplayPort and additional SDVO output support will follow. Support for the mode setting code is controlled by the new 'modeset' module option. A new config option, CONFIG_DRM_I915_KMS controls the default behavior, and whether a PCI ID list is built into the module for use by user level module utilities. Note that if mode setting is enabled, user level drivers that access display registers directly or that don't use the kernel graphics memory manager will likely corrupt kernel graphics memory, disrupt output configuration (possibly leading to hangs and/or blank displays), and prevent panic/oops messages from appearing. So use caution when enabling this code; be sure your user level code supports the new interfaces. A new SysRq key, 'g', provides emergency support for switching back to the kernel's framebuffer console; which is useful for testing. Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: NEric Anholt <eric@anholt.net> Signed-off-by: NDave Airlie <airlied@redhat.com>
-