Both btrfs_repair_one_sector and submit_bio_one as the direct caller of
one of the instances ignore errors as they expect the methods themselves
to call ->bi_end_io on error.  Remove the unused and dangerous return
value.
Reviewed-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Keep btrfs_readpage next to btrfs_do_readpage and the other address
space operations.  This allows to keep submit_one_bio and
struct btrfs_bio_ctrl file local in extent_io.c.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

[BUG]
When running generic/475 with 64K page size and 4K sector size, it has a
very high chance (almost 100%) to hang, with mostly data page locked but
no one is going to unlock it.

[CAUSE]
With commit 1784b7d5 ("btrfs: handle csum lookup errors properly on
reads"), if we failed to lookup checksum due to metadata IO error, we
will return error for btrfs_submit_data_bio().

This will cause the page to be unlocked twice in btrfs_do_readpage():

 btrfs_do_readpage()
 |- submit_extent_page()
 |  |- submit_one_bio()
 |     |- btrfs_submit_data_bio()
 |        |- if (ret) {
 |        |-     bio->bi_status = ret;
 |        |-     bio_endio(bio); }
 |               In the endio function, we will call end_page_read()
 |               and unlock_extent() to cleanup the subpage range.
 |
 |- if (ret) {
 |-        unlock_extent(); end_page_read() }
           Here we unlock the extent and cleanup the subpage range
           again.

For unlock_extent(), it's mostly double unlock safe.

But for end_page_read(), it's not, especially for subpage case,
as for subpage case we will call btrfs_subpage_end_reader() to reduce
the reader number, and use that to number to determine if we need to
unlock the full page.

If double accounted, it can underflow the number and leave the page
locked without anyone to unlock it.

[FIX]
The commit 1784b7d5 ("btrfs: handle csum lookup errors properly on
reads") itself is completely fine, it's our existing code not properly
handling the error from bio submission hook properly.

This patch will make submit_one_bio() to return void so that the callers
will never be able to do cleanup when bio submission hook fails.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Pass the block_device to bio_alloc_clone instead of setting it later.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Several functions currently populate an array of page pointers one
allocated page at a time. Factor out the common code so as to allow
improvements to all of the sites at once.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NSweet Tea Dorminy <sweettea-kernel@dorminy.me>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We use extent_changeset->bytes_changed in qgroup_reserve_data() to record
how many bytes we set for EXTENT_QGROUP_RESERVED state. Currently the
bytes_changed is set as "unsigned int", and it will overflow if we try to
fallocate a range larger than 4GiB. The result is we reserve less bytes
and eventually break the qgroup limit.

Unlike regular buffered/direct write, which we use one changeset for
each ordered extent, which can never be larger than 256M.  For
fallocate, we use one changeset for the whole range, thus it no longer
respects the 256M per extent limit, and caused the problem.

The following example test script reproduces the problem:

  $ cat qgroup-overflow.sh
  #!/bin/bash

  DEV=/dev/sdj
  MNT=/mnt/sdj

  mkfs.btrfs -f $DEV
  mount $DEV $MNT

  # Set qgroup limit to 2GiB.
  btrfs quota enable $MNT
  btrfs qgroup limit 2G $MNT

  # Try to fallocate a 3GiB file. This should fail.
  echo
  echo "Try to fallocate a 3GiB file..."
  fallocate -l 3G $MNT/3G.file

  # Try to fallocate a 5GiB file.
  echo
  echo "Try to fallocate a 5GiB file..."
  fallocate -l 5G $MNT/5G.file

  # See we break the qgroup limit.
  echo
  sync
  btrfs qgroup show -r $MNT

  umount $MNT

When running the test:

  $ ./qgroup-overflow.sh
  (...)

  Try to fallocate a 3GiB file...
  fallocate: fallocate failed: Disk quota exceeded

  Try to fallocate a 5GiB file...

  qgroupid         rfer         excl     max_rfer
  --------         ----         ----     --------
  0/5           5.00GiB      5.00GiB      2.00GiB

Since we have no control of how bytes_changed is used, it's better to
set it to u64.

CC: stable@vger.kernel.org # 4.14+
Reviewed-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NEthan Lien <ethanlien@synology.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

There are several cleanups for extent_write_locked_range(), most of them
are pure cleanups, but with some preparation for future subpage support.

- Add a proper comment for which call sites are suitable
  Unlike regular synchronized extent write back, if async COW or zoned
  COW happens, we have all pages in the range still locked.

  Thus for those (only) two call sites, we need this function to submit
  page content into bios and submit them.

- Remove @mode parameter
  All the existing two call sites pass WB_SYNC_ALL. No need for @mode
  parameter.

- Better error handling
  Currently if we hit an error during the page iteration loop, we
  overwrite @ret, causing only the last error can be recorded.

  Here we add @found_error and @first_error variable to record if we hit
  any error, and the first error we hit.
  So the first error won't get lost.

- Don't reuse @start as the cursor
  We reuse the parameter @start as the cursor to iterate the range, not
  a big problem, but since we're here, introduce a proper @cur as the
  cursor.

- Remove impossible branch
  Since all pages are still locked after the ordered extent is inserted,
  there is no way that pages can get its dirty bit cleared.
  Remove the branch where page is not dirty and replace it with an
  ASSERT().
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Previously we had "struct btrfs_bio", which records IO context for
mirrored IO and RAID56, and "strcut btrfs_io_bio", which records extra
btrfs specific info for logical bytenr bio.

With "btrfs_bio" renamed to "btrfs_io_context", we are safe to rename
"btrfs_io_bio" to "btrfs_bio" which is a more suitable name now.

The struct btrfs_bio changes meaning by this commit. There was a
suggested name like btrfs_logical_bio but it's a bit long and we'd
prefer to use a shorter name.

This could be a concern for backports to older kernels where the
different meaning could possibly cause confusion or bugs. Comparing the
new and old structures, there's no overlap among the struct members so a
build would break in case of incorrect backport.

We haven't had many backports to bio code anyway so this is more of a
theoretical cause of bugs and a matter of precaution but we'll need to
keep the semantic change in mind.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The helper btrfs_bio_alloc() is almost the same as btrfs_io_bio_alloc(),
except it's allocating using BIO_MAX_VECS as @nr_iovecs, and initializes
bio->bi_iter.bi_sector.

However the naming itself is not using "btrfs_io_bio" to indicate its
parameter is "strcut btrfs_io_bio" and can be easily confused with
"struct btrfs_bio".

Considering assigned bio->bi_iter.bi_sector is such a simple work and
there are already tons of call sites doing that manually, there is no
need to do that in a helper.

Remove btrfs_bio_alloc() helper, and enhance btrfs_io_bio_alloc()
function to provide a fail-safe value for its @nr_iovecs.

And then replace all btrfs_bio_alloc() callers with
btrfs_io_bio_alloc().
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Function repair_io_failure() is no longer used out of extent_io.c since
commit 8b9b6f25 ("btrfs: scrub: cleanup the remaining nodatasum
fixup code"), which removes the last external caller.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

If we have written to the zone capacity, the device automatically
deactivates the zone. Sync up block group side (the active BG list and
zone_is_active flag) with it.

We need to do it both on data BGs and metadata BGs. On data side, we add a
hook to btrfs_finish_ordered_io(). On metadata side, we use
end_extent_buffer_writeback().

To reduce excess lookup of a block group, we mark the last extent buffer in
a block group with EXTENT_BUFFER_ZONE_FINISH flag. This cannot be done for
data (ordered_extent), because the address may change due to
REQ_OP_ZONE_APPEND.
Signed-off-by: NNaohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The offset and can never be negative use unsigned int instead of int
type for them.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NNaohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Inside btrfs we use Private2 page status to indicate we have an ordered
extent with pending IO for the sector.

But the page status name, Private2, tells us nothing about the bit
itself, so this patch will rename it to Ordered.
And with extra comment about the bit added, so reader who is still
uncertain about the page Ordered status, will find the comment pretty
easily.
Reviewed-by: NJosef Bacik <josef@toxicpanda.com>
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

There is a lot of code inside extent_io.c needs both "struct bio
**bio_ret" and "unsigned long prev_bio_flags", along with some
parameters like "unsigned long bio_flags".

Such strange parameters are here for bio assembly.

For example, we have such inode page layout:

  0       4K      8K      12K
  |<-- Extent A-->|<- EB->|

Then what we do is:

- Page [0, 4K)
  *bio_ret = NULL
  So we allocate a new bio to bio_ret,
  Add page [0, 4K) to *bio_ret.

- Page [4K, 8K)
  *bio_ret != NULL
  We found this page is continuous to *bio_ret,
  and if we're not at stripe boundary, we
  add page [4K, 8K) to *bio_ret.

- Page [8K, 12K)
  *bio_ret != NULL
  But we found this page is not continuous, so
  we submit *bio_ret, then allocate a new bio,
  and add page [8K, 12K) to the new bio.

This means we need to record both the bio and its bio_flag, but we
record them manually using those strange parameter list, other than
encapsulating them into their own structure.

So this patch will introduce a new structure, btrfs_bio_ctrl, to record
both the bio, and its bio_flags.

Also, in above case, for all pages added to the bio, we need to check if
the new page crosses stripe boundary.  This check itself can be time
consuming, and we don't really need to do that for each page.

This patch also integrates the stripe boundary check into btrfs_bio_ctrl.
When a new bio is allocated, the stripe and ordered extent boundary is
also calculated, so no matter how large the bio will be, we only
calculate the boundaries once, to save some CPU time.

The following functions/structures are affected:

- struct extent_page_data
  Replace its bio pointer with structure btrfs_bio_ctrl (embedded
  structure, not pointer)

- end_write_bio()
- flush_write_bio()
  Just change how bio is fetched

- btrfs_bio_add_page()
  Use pre-calculated boundaries instead of re-calculating them.
  And use @bio_ctrl to replace @bio and @prev_bio_flags.

- calc_bio_boundaries()
  New function

- submit_extent_page() callers
- btrfs_do_readpage() callers
- contiguous_readpages() callers
  To Use @bio_ctrl to replace @bio and @prev_bio_flags, and how to grab
  bio.

- btrfs_bio_fits_in_ordered_extent()
  Removed, as now the ordered extent size limit is done at bio
  allocation time, no need to check for each page range.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The io_failure_record::in_validation was introduced to handle failed bio
which cross several sectors.  In such case, we still need to verify
which sectors are corrupted.

But since we've changed the way how we handle corrupted sectors, by only
submitting repair for each corrupted sector, there is no need for extra
validation any more.

This patch will cleanup all io_failure_record::in_validation related
code.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Currently btrfs_submit_read_repair() has some extra check on whether the
failed bio needs extra validation for repair.  But we can avoid all
these extra mechanisms if we submit the repair for each sector.

By this, each read repair can be easily handled without the need to
verify which sector is corrupted.

This will also benefit subpage, as one subpage bvec can contain several
sectors, making the extra verification more complex.

So this patch will:

- Introduce repair_one_sector()
  The main code submitting repair, which is more or less the same as old
  btrfs_submit_read_repair().
  But this time, it only repairs one sector.

- Make btrfs_submit_read_repair() to handle sectors differently
  There are 3 different cases:

  * Good sector
    We need to release the page and extent, set the range uptodate.

  * Bad sector and failed to submit repair bio
    We need to release the page and extent, but not set the range
    uptodate.

  * Bad sector but repair bio submitted
    The page and extent release will be handled by the submitted repair
    bio. Nothing needs to be done.

  Since btrfs_submit_read_repair() will handle the page and extent
  release now, we need to skip to next bvec even we hit some error.

- Change the lifespan of @uptodate in end_bio_extent_readpage()
  Since now btrfs_submit_read_repair() will handle the full bvec
  which contains any corruption, we don't need to bother updating
  @uptodate bit anymore.
  Just let @uptodate to be local variable inside the main loop,
  so that any error from one bvec won't affect later bvec.

- Only export btrfs_repair_one_sector(), unexport
  btrfs_submit_read_repair()
  The only outside caller for read repair is DIO, which already submits
  its repair for just one sector.
  Only export btrfs_repair_one_sector() for DIO.

This patch will focus on the change on the repair path, the extra
validation code is still kept as is, and will be cleaned up later.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

There are two forward declarations deep in extent_io.h, move them
to the beginning and remove the duplicate one.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NWan Jiabing <wanjiabing@vivo.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Tree manipulating operations like merging nodes often release
once-allocated tree nodes. Such nodes are cleaned so that pages in the
node are not uselessly written out. On zoned volumes, however, such
optimization blocks the following IOs as the cancellation of the write
out of the freed blocks breaks the sequential write sequence expected by
the device.

Introduce a list of clean and unwritten extent buffers that have been
released in a transaction. Redirty the buffers so that
btree_write_cache_pages() can send proper bios to the devices.

Besides it clears the entire content of the extent buffer not to confuse
raw block scanners e.g. 'btrfs check'. By clearing the content,
csum_dirty_buffer() complains about bytenr mismatch, so avoid the
checking and checksum using newly introduced buffer flag
EXTENT_BUFFER_NO_CHECK.
Reviewed-by: NJosef Bacik <josef@toxicpanda.com>
Signed-off-by: NNaohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

To support subpage sector size, data also need extra info to make sure
which sectors in a page are uptodate/dirty/...

This patch will make pages for data inodes get btrfs_subpage structure
attached, and detached when the page is freed.

This patch also slightly changes the timing when
set_page_extent_mapped() is called to make sure:

- We have page->mapping set
  page->mapping->host is used to grab btrfs_fs_info, thus we can only
  call this function after page is mapped to an inode.

  One call site attaches pages to inode manually, thus we have to modify
  the timing of set_page_extent_mapped() a bit.

- As soon as possible, before other operations
  Since memory allocation can fail, we have to do extra error handling.
  Calling set_page_extent_mapped() as soon as possible can simply the
  error handling for several call sites.

The idea is pretty much the same as iomap_page, but with more bitmaps
for btrfs specific cases.

Currently the plan is to switch iomap if iomap can provide sector
aligned write back (only write back dirty sectors, but not the full
page, data balance require this feature).

So we will stick to btrfs specific bitmap for now.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

PAGE_CLEAR_DIRTY and PAGE_SET_WRITEBACK are two defines used in
__process_pages_contig(), to let the function know to clear page dirty
bit and then set page writeback.

However page writeback and dirty bits are conflicting (at least for
sector size == PAGE_SIZE case), this means these two have to be always
updated together.

This means we can merge PAGE_CLEAR_DIRTY and PAGE_SET_WRITEBACK to
PAGE_START_WRITEBACK.
Reviewed-by: NJosef Bacik <josef@toxicpanda.com>
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

For subpage sized extent buffer, we have ensured no extent buffer will
cross page boundary, thus we would only need one page for any extent
buffer.

Update function num_extent_pages to handle such case.  Now
num_extent_pages() returns 1 for subpage sized extent buffer.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Btrfs only support 64K as maximum node size, thus for 4K page system, we
would have at most 16 pages for one extent buffer.

For a system using 64K page size, we would really have just one page.

While we always use 16 pages for extent_buffer::pages, this means for
systems using 64K pages, we are wasting memory for 15 page pointers
which will never be used.

Calculate the array size based on page size and the node size maximum.

- for systems using 4K page size, it will stay 16 pages
- for systems using 64K page size, it will be 1 page

Move the definition of BTRFS_MAX_METADATA_BLOCKSIZE to btrfs_tree.h, to
avoid circular inclusion of ctree.h.
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Parameter icsum for check_data_csum() is a little hard to understand.
So is the phy_offset for btrfs_verify_data_csum().

Both parameters are calculated values for csum lookup.

Instead of some calculated value, just pass bio_offset and let the
final and only user, check_data_csum(), calculate whatever it needs.

Since we are here, also make the bio_offset parameter and some related
variables to be u32 (unsigned int).
As bio size is limited by its bi_size, which is unsigned int, and has
extra size limit check during various bio operations.
Thus we are ensured that bio_offset won't overflow u32.

Thus for all involved functions, not only rename the parameter from
@phy_offset to @bio_offset, but also reduce its width to u32, so we
won't have suspicious "u32 = u64 >> sector_bits;" lines anymore.
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NJosef Bacik <josef@toxicpanda.com>
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The parameter bio_offset of extent_submit_bio_start_t is very confusing.
If it's really bio_offset (offset to bio), then it should be u32.  But
in fact, it's only utilized by dio read, and that member is used as file
offset, which must be u64.

Rename it to dio_file_offset since the only user uses it as file offset,
and add comment for who is using it.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Currently the type is unsigned int which could change its width
depending on the architecture. We need up to 32 bits so make it
explicit.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

It is unused everywhere now, it can be removed.
Reviewed-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Now that we've plumbed all of the callers to have the owner root and the
level, plumb it down into alloc_extent_buffer().
Reviewed-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We're going to pass around more information when we allocate extent
buffers, in order to make that cleaner how we do readahead.  Most of the
callers have the parent node that we're getting our blockptr from, with
the sole exception of relocation which simply has the bytenr it wants to
read.

Add a helper that takes the current arguments that we need (bytenr and
gen), and add another helper for simply reading the slot out of a node.
In followup patches the helper that takes all the extra arguments will
be expanded, and the simpler helper won't need to have it's arguments
adjusted.
Reviewed-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

After the rwsem replaced the tree lock implementation, the extent buffer
got smaller but leaving some holes behind. By changing log_index type
and reordering, we can squeeze the size further to 240 bytes, measured on
release config on x86_64. Log_index spans only 3 values and needs to be
signed.

Before:

struct extent_buffer {
        u64                        start;                /*     0     8 */
        long unsigned int          len;                  /*     8     8 */
        long unsigned int          bflags;               /*    16     8 */
        struct btrfs_fs_info *     fs_info;              /*    24     8 */
        spinlock_t                 refs_lock;            /*    32     4 */
        atomic_t                   refs;                 /*    36     4 */
        atomic_t                   io_pages;             /*    40     4 */
        int                        read_mirror;          /*    44     4 */
        struct callback_head       callback_head __attribute__((__aligned__(8))); /*    48    16 */
        /* --- cacheline 1 boundary (64 bytes) --- */
        pid_t                      lock_owner;           /*    64     4 */
        bool                       lock_recursed;        /*    68     1 */

        /* XXX 3 bytes hole, try to pack */

        struct rw_semaphore        lock;                 /*    72    40 */
        short int                  log_index;            /*   112     2 */

        /* XXX 6 bytes hole, try to pack */

        struct page *              pages[16];            /*   120   128 */

        /* size: 248, cachelines: 4, members: 14 */
        /* sum members: 239, holes: 2, sum holes: 9 */
        /* forced alignments: 1 */
        /* last cacheline: 56 bytes */
} __attribute__((__aligned__(8)));

After:

struct extent_buffer {
        u64                        start;                /*     0     8 */
        long unsigned int          len;                  /*     8     8 */
        long unsigned int          bflags;               /*    16     8 */
        struct btrfs_fs_info *     fs_info;              /*    24     8 */
        spinlock_t                 refs_lock;            /*    32     4 */
        atomic_t                   refs;                 /*    36     4 */
        atomic_t                   io_pages;             /*    40     4 */
        int                        read_mirror;          /*    44     4 */
        struct callback_head       callback_head __attribute__((__aligned__(8))); /*    48    16 */
        /* --- cacheline 1 boundary (64 bytes) --- */
        pid_t                      lock_owner;           /*    64     4 */
        bool                       lock_recursed;        /*    68     1 */
        s8                         log_index;            /*    69     1 */

        /* XXX 2 bytes hole, try to pack */

        struct rw_semaphore        lock;                 /*    72    40 */
        struct page *              pages[16];            /*   112   128 */

        /* size: 240, cachelines: 4, members: 14 */
        /* sum members: 238, holes: 1, sum holes: 2 */
        /* forced alignments: 1 */
        /* last cacheline: 48 bytes */
} __attribute__((__aligned__(8)));
Reviewed-by: NJosef Bacik <josef@toxicpanda.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

All callers of btrfs_wq_submit_bio() pass struct inode as @private_data,
so there is no need for it to be (void *), replace it with "struct inode
*inode".

While we can extract fs_info from struct inode, also remove the @fs_info
parameter.

Since we're here, also replace all the (void *private_data) into (struct
inode *inode).
Reviewed-by: NGoldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Historically we've implemented our own locking because we wanted to be
able to selectively spin or sleep based on what we were doing in the
tree.  For instance, if all of our nodes were in cache then there's
rarely a reason to need to sleep waiting for node locks, as they'll
likely become available soon.  At the time this code was written the
rw_semaphore didn't do adaptive spinning, and thus was orders of
magnitude slower than our home grown locking.

However now the opposite is the case.  There are a few problems with how
we implement blocking locks, namely that we use a normal waitqueue and
simply wake everybody up in reverse sleep order.  This leads to some
suboptimal performance behavior, and a lot of context switches in highly
contended cases.  The rw_semaphores actually do this properly, and also
have adaptive spinning that works relatively well.

The locking code is also a bit of a bear to understand, and we lose the
benefit of lockdep for the most part because the blocking states of the
lock are simply ad-hoc and not mapped into lockdep.

So rework the locking code to drop all of this custom locking stuff, and
simply use a rw_semaphore for everything.  This makes the locking much
simpler for everything, as we can now drop a lot of cruft and blocking
transitions.  The performance numbers vary depending on the workload,
because generally speaking there doesn't tend to be a lot of contention
on the btree.  However, on my test system which is an 80 core single
socket system with 256GiB of RAM and a 2TiB NVMe drive I get the
following results (with all debug options off):

  dbench 200 baseline
  Throughput 216.056 MB/sec  200 clients  200 procs  max_latency=1471.197 ms

  dbench 200 with patch
  Throughput 737.188 MB/sec  200 clients  200 procs  max_latency=714.346 ms

Previously we also used fs_mark to test this sort of contention, and
those results are far less impressive, mostly because there's not enough
tasks to really stress the locking

  fs_mark -d /d[0-15] -S 0 -L 20 -n 100000 -s 0 -t 16

  baseline
    Average Files/sec:     160166.7
    p50 Files/sec:         165832
    p90 Files/sec:         123886
    p99 Files/sec:         123495

    real    3m26.527s
    user    2m19.223s
    sys     48m21.856s

  patched
    Average Files/sec:     164135.7
    p50 Files/sec:         171095
    p90 Files/sec:         122889
    p99 Files/sec:         113819

    real    3m29.660s
    user    2m19.990s
    sys     44m12.259s
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

It's no longer used just remove the function and any related code which
was initialising it for inodes. No functional changes.

Removing 8 bytes from extent_io_tree in turn reduces size of other
structures where it is embedded, notably btrfs_inode where it reduces
size by 24 bytes.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

It's no longer used so let's remove it.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

This makes reading the code a tad easier by decreasing the level of
indirection by one.
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

It's always set to 0 by its sole caller - btrfs_readpage. Simply remove
it.
Reviewed-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

It's always set to 0 from the sole caller - btrfs_readpage.
Reviewed-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Now that btrfs_readpage is the only caller of extent_read_full_page the
latter can be open coded in the former. Use the occassion to rename
__extent_read_full_page to extent_read_full_page. To facillitate this
change submit_one_bio has to be exported as well.
Reviewed-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

It's called only from btrfs_readpage which always passes 0 so just sink
the argument into extent_read_full_page.
Reviewed-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Now that this function is only responsible for reading data pages it's
no longer necessary to pass get_extent_t parameter across several
layers of functions. This patch removes this parameter from multiple
functions: __get_extent_map/__do_readpage/__extent_read_full_page/
extent_read_full_page and simply calls btrfs_get_extent directly in
__get_extent_map.
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: NJosef Bacik <josef@toxicpanda.com>
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>