- 30 7月, 2008 1 次提交
-
-
由 Tim Wright 提交于
It seems cdrwtool in the udftools has been unusable on "modern" kernels for some time. A Google search reveals many people with the same issue but no solution (cdrwtool fails to format the disk). After spending some time tracking down the issue, it comes down to the following: The udftools still use the older CDROM_SEND_PACKET interface to send things like FORMAT_UNIT through to the drive. They should really be updated, but that's another story. Since most distros are using libata now, the cd or dvd burner appears as a SCSI device, and we wind up in block/scsi_ioctl.c. Here, the code tries to take the "struct cdrom_generic_command" and translate it and stuff it into a "struct sg_io_hdr" structure so it can pass it to the modern sg_io() routine instead. Unfortunately, there is one error, or rather an omission in the translation. The timeout that is passed in in the "struct cdrom_generic_command" is in HZ=100 units, and this is modified and correctly converted to jiffies by use of clock_t_to_jiffies(). However, a little further down, this cgc.timeout value in jiffies is simply copied into the sg_io_hdr timeout, which should be in milliseconds. Since most modern x86 kernels seems to be getting build with HZ=250, the timeout that is passed to sg_io and eventually converted to the timeout_per_command member of the scsi_cmnd structure is now four times too small. Since cdrwtool tries to set the timeout to one hour for the FORMAT_UNIT command, and it takes about 20 minutes to format a 4x CDRW, the SCSI error-handler kicks in after the FORMAT_UNIT completes because it took longer than the incorrectly-calculated timeout. [jejb: fix up whitespace] Signed-off-by: NTim Wright <timw@splhi.com> Cc: Stable Tree <stable@kernel.org> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 03 7月, 2008 1 次提交
-
-
由 Adel Gadllah 提交于
This patch exports the per-gendisk command filter to user space through sysfs, so it can be changed by the system administrator. All users of the old cmd filter have been converted to use the new one. Original patch from Peter Jones. Signed-off-by: NAdel Gadllah <adel.gadllah@gmail.com> Signed-off-by: NPeter Jones <pjones@redhat.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 03 5月, 2008 1 次提交
-
-
由 Boaz Harrosh 提交于
Add support for variable-length, extended, and vendor specific CDBs to scsi-ml. It is now possible for initiators and ULD's to issue these types of commands. LLDs need not change much. All they need is to raise the .max_cmd_len to the longest command they support (see iscsi patch). - clean-up some code paths that did not expect commands to be larger than 16, and change cmd_len members' type to short as char is not enough. Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 29 4月, 2008 1 次提交
-
-
由 FUJITA Tomonori 提交于
blk_get_request initializes rq->cmd (rq_init does) so the users don't need to do that. The purpose of this patch is to remove sizeof(rq->cmd) and &rq->cmd, as a preparation for large command support, which changes rq->cmd from the static array to a pointer. sizeof(rq->cmd) will not make sense and &rq->cmd won't work. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Alasdair G Kergon <agk@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 04 3月, 2008 1 次提交
-
-
由 FUJITA Tomonori 提交于
The meaning of rq->data_len was changed to the length of an allocated buffer from the true data length. It breaks SG_IO friends and bsg. This patch restores the meaning of rq->data_len to the true data length and adds rq->extra_len to store an extended length (due to drain buffer and padding). This patch also removes the code to update bio in blk_rq_map_user introduced by the commit 40b01b9b. The commit adjusts bio according to memory alignment (queue_dma_alignment). However, memory alignment is NOT padding alignment. This adjustment also breaks SG_IO friends and bsg. Padding alignment needs to be fixed in a proper way (by a separate patch). Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: NJens Axboe <axboe@carl.home.kernel.dk>
-
- 19 2月, 2008 1 次提交
-
-
由 Tejun Heo 提交于
With padding and draining moved into it, block layer now may extend requests as directed by queue parameters, so now a request has two sizes - the original request size and the extended size which matches the size of area pointed to by bios and later by sgs. The latter size is what lower layers are primarily interested in when allocating, filling up DMA tables and setting up the controller. Both padding and draining extend the data area to accomodate controller characteristics. As any controller which speaks SCSI can handle underflows, feeding larger data area is safe. So, this patch makes the primary data length field, request->data_len, indicate the size of full data area and add a separate length field, request->raw_data_len, for the unmodified request size. The latter is used to report to higher layer (userland) and where the original request size should be fed to the controller or device. Signed-off-by: NTejun Heo <htejun@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 18 12月, 2007 1 次提交
-
-
由 Tejun Heo 提交于
Use msecs_to_jiffies() and jiffies_to_msecs() in scsi_ioctl(). Sometimes callers use very large values for e.g. vendor specific media clear command and calculation can overflow. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 24 7月, 2007 1 次提交
-
-
由 Jens Axboe 提交于
Some of the code has been gradually transitioned to using the proper struct request_queue, but there's lots left. So do a full sweet of the kernel and get rid of this typedef and replace its uses with the proper type. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 22 7月, 2007 1 次提交
-
-
由 FUJITA Tomonori 提交于
blk_fill_sghdr_rq, blk_unmap_sghdr_rq, and blk_complete_sghdr_rq were exported for bsg, however bsg was changed to support only sg v4. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 20 7月, 2007 1 次提交
-
-
由 Yoann Padioleau 提交于
Transform some calls to kmalloc/memset to a single kzalloc (or kcalloc). Here is a short excerpt of the semantic patch performing this transformation: @@ type T2; expression x; identifier f,fld; expression E; expression E1,E2; expression e1,e2,e3,y; statement S; @@ x = - kmalloc + kzalloc (E1,E2) ... when != \(x->fld=E;\|y=f(...,x,...);\|f(...,x,...);\|x=E;\|while(...) S\|for(e1;e2;e3) S\) - memset((T2)x,0,E1); @@ expression E1,E2,E3; @@ - kzalloc(E1 * E2,E3) + kcalloc(E1,E2,E3) [akpm@linux-foundation.org: get kcalloc args the right way around] Signed-off-by: NYoann Padioleau <padator@wanadoo.fr> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Acked-by: NRussell King <rmk@arm.linux.org.uk> Cc: Bryan Wu <bryan.wu@analog.com> Acked-by: NJiri Slaby <jirislaby@gmail.com> Cc: Dave Airlie <airlied@linux.ie> Acked-by: NRoland Dreier <rolandd@cisco.com> Cc: Jiri Kosina <jkosina@suse.cz> Acked-by: NDmitry Torokhov <dtor@mail.ru> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: NMauro Carvalho Chehab <mchehab@infradead.org> Acked-by: NPierre Ossman <drzeus-list@drzeus.cx> Cc: Jeff Garzik <jeff@garzik.org> Cc: "David S. Miller" <davem@davemloft.net> Acked-by: NGreg KH <greg@kroah.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 16 7月, 2007 4 次提交
-
-
由 FUJITA Tomonori 提交于
bsg uses scsi_cmd_ioctl() for some SCSI/sg ioctl commands. scsi_cmd_ioctl() gets a request queue from a gendisk arguement. This prevents bsg being bound to SCSI devices that don't have a gendisk (like OSD). This adds a request_queue argument to scsi_cmd_ioctl(). The SCSI/sg ioctl commands doesn't use a gendisk so it's safe for any SCSI devices to use scsi_cmd_ioctl(). Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 FUJITA Tomonori 提交于
blk_fill_sghdr_rq doesn't work for SG v4 so verify_command needed to be exported. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 FUJITA Tomonori 提交于
This converts block/scsi_ioctl.c use blk_rq_unmap_user new API. blk_unmap_sghdr_rq is too simple and it might be better to remove it. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Jens Axboe 提交于
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 18 4月, 2007 1 次提交
-
-
由 Alan Stern 提交于
This patch (as857) modifies the SG_GET_RESERVED_SIZE and SG_SET_RESERVED_SIZE ioctls in the sg driver, capping the values at the device's request_queue's max_sectors value. This will permit cdrecord to obtain a legal value for the maximum transfer length, fixing Bugzilla #7026. The patch also caps the initial reserved_size value. There's no reason to have a reserved buffer larger than max_sectors, since it would be impossible to use the extra space. The corresponding ioctls in the block layer are modified similarly, and the initial value for the reserved_size is set as large as possible. This will effectively make it default to max_sectors. Note that the actual value is meaningless anyway, since block devices don't have a reserved buffer. Finally, the BLKSECTGET ioctl is added to sg, so that there will be a uniform way for users to determine the actual max_sectors value for any raw SCSI transport. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Acked-by: NJens Axboe <jens.axboe@oracle.com> Acked-by: NDouglas Gilbert <dougg@torque.net> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 30 1月, 2007 1 次提交
-
-
由 Mike Christie 提交于
Commit 85e04e37 cleaned up the timeout conversion, but did it exactly the wrong way. We get msecs from user space, and should convert them into jiffies. Not the other way around. Here is a fix with the overflow check sg.c has added in. This fixes DVD burnign with Nero. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> [ "you'll be wanting a comma there" - Andrew ] Cc: Andrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 19 12月, 2006 1 次提交
-
-
由 Jens Axboe 提交于
The blk_rq_unmap_user() API is not very nice. It expects the caller to know that rq->bio has to be reset to the original bio, and it will silently do nothing if that is not done. Instead make it explicit that we need to pass in the first bio, by expecting a bio argument. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 12 12月, 2006 2 次提交
-
-
由 FUJITA Tomonori 提交于
When I converted the original patch, I left unnecessary blk_queue_bounce in SG_IO. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 FUJITA Tomonori 提交于
This patch fixes bio leaks in SG_IO. rq->bio can be changed after io completion, so we need to reset rq->bio before calling blk_rq_unmap_user() http://marc.theaimsgroup.com/?l=linux-kernel&m=116570666807983&w=2Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 01 12月, 2006 1 次提交
-
-
由 Mike Christie 提交于
This patch modifies blk_rq_map/unmap_user() and the cdrom and scsi_ioctl.c users so that it supports requests larger than bio by chaining them together. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 17 11月, 2006 1 次提交
-
-
由 Tejun Heo 提交于
ATAPI devices transfer fixed number of bytes for CDBs (12 or 16). Some ATAPI devices choke when shorter CDB is used and the left bytes contain garbage. Block SG_IO cleared left bytes but SCSI SG_IO didn't. This patch makes SCSI SG_IO clear it and simplify CDB clearing in block SG_IO. Signed-off-by: NTejun Heo <htejun@gmail.com> Cc: Mathieu Fluhr <mfluhr@nero.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Douglas Gilbert <dougg@torque.net> Acked-by: NJens Axboe <jens.axboe@oracle.com> Cc: <stable@kernel.org> Acked-by: NJeff Garzik <jgarzik@pobox.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 16 11月, 2006 1 次提交
-
-
由 Hannes Reinecke 提交于
Use the proper conversion function for convert jiffies to msecs in sg_io(). Signed-off-by: NHannes Reinecke <hare@suse.de> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 14 11月, 2006 1 次提交
-
-
由 Jens Axboe 提交于
Contrary to what the name misleads you to believe, SG_DXFER_TO_FROM_DEV is really just a normal read seen from the device side. This patch fixes http://lkml.org/lkml/2006/10/13/100Signed-off-by: NJens Axboe <jens.axboe@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 01 10月, 2006 1 次提交
-
-
由 Jens Axboe 提交于
Right now ->flags is a bit of a mess: some are request types, and others are just modifiers. Clean this up by splitting it into ->cmd_type and ->cmd_flags. This allows introduction of generic Linux block message types, useful for sending generic Linux commands to block devices. Signed-off-by: NJens Axboe <axboe@suse.de>
-
- 13 4月, 2006 1 次提交
-
-
由 Christoph Hellwig 提交于
We currently have two implementations of this obsolete ioctl, one in the block layer and one in the scsi code. Both of them have drawbacks. This patch kills the scsi layer version after updating the block version with the missing bits: - argument checking - use scatterlist I/O - set number of retries based on the submitted command This is the last user of non-S/G I/O except for the gdth driver, so getting this in ASAP and through the scsi tree would be nie to kill the non-S/G I/O path. Jens, what do you think about adding a check for non-S/G I/O in the midlayer? Thanks to Or Gerlitz for testing this patch. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 08 2月, 2006 1 次提交
-
-
由 Jens Axboe 提交于
When issuing an SG_IO ioctl through sd that resulted in an unrecoverable error, a nearly infinite retry loop was discovered. This is due to the fact that the block layer SG_IO code is not setting up rq->retries. This patch also fixes up the sg_scsi_ioctl path. Signed-off-by: NBrian King <brking@us.ibm.com> Signed-off-by: NJens Axboe <axboe@suse.de>
-
- 12 1月, 2006 1 次提交
-
-
由 Randy.Dunlap 提交于
- Move capable() from sched.h to capability.h; - Use <linux/capability.h> where capable() is used (in include/, block/, ipc/, kernel/, a few drivers/, mm/, security/, & sound/; many more drivers/ to go) Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 09 1月, 2006 1 次提交
-
-
由 Jens Axboe 提交于
Signed-off-by: NJens Axboe <axboe@suse.de>
-
- 06 1月, 2006 1 次提交
-
-
由 Arjan van de Ven 提交于
the patch below marks various read-only variables in block/* as const, so that gcc can optimize the use of them; eg gcc will replace the use by the value directly now and will even remove the memory usage of these. Signed-off-by: NArjan van de Ven <arjan@infradead.org> Signed-off-by: NJens Axboe <axboe@suse.de>
-
- 20 12月, 2005 1 次提交
-
-
由 Ben Collins 提交于
This is just a basic cleanup. No change in functionality. Signed-off-by: NBen Collins <bcollins@ubuntu.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 16 12月, 2005 1 次提交
-
-
由 Mike Christie 提交于
- export __blk_put_request and blk_execute_rq_nowait needed for async REQ_BLOCK_PC requests - seperate max_hw_sectors and max_sectors for block/scsi_ioctl.c and SG_IO bio.c helpers per Jens's last comments. Since block/scsi_ioctl.c SG_IO was already testing against max_sectors and SCSI-ml was setting max_sectors and max_hw_sectors to the same value this does not change any scsi SG_IO behavior. It only prepares ll_rw_blk.c, scsi_ioctl.c and bio.c for when SCSI-ml begins to set a valid max_hw_sectors for all LLDs. Today if a LLD does not set it SCSI-ml sets it to a safe default and some LLDs set it to a artificial low value to overcome memory and feedback issues. Note: Since we now cap max_sectors to BLK_DEF_MAX_SECTORS, which is 1024, drivers that used to call blk_queue_max_sectors with a large value of max_sectors will now see the fs requests capped to BLK_DEF_MAX_SECTORS. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 04 11月, 2005 1 次提交
-
-
由 Jens Axboe 提交于
drivers/block/ is right now a mix of core and driver parts. Lets move the core parts to a new top level directory. Al will move the fs/ related block parts to block/ next. Signed-off-by: NJens Axboe <axboe@suse.de>
-
- 09 10月, 2005 1 次提交
-
-
由 Jens Axboe 提交于
We should not be warning about commands that we allow, even if they are unknown. So move the if-root-allow check up a notch. Signed-off-by: NJens Axboe <axboe@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 18 9月, 2005 1 次提交
-
-
由 Thomas Maguin 提交于
Add WRITE_LONG_2 as write safe commands, which which allows normal users to make a c1-, c2- and cu-scan (so called cxscan) with readcd on cxscan-capable cd/dvd-writers Signed-off-by: NJens Axboe <axboe@suse.de> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 10 9月, 2005 1 次提交
-
-
由 Douglas Gilbert 提交于
The soon to be released smartmontools 5.34 uses the READ DEFECT DATA command on SCSI disks. A disk that has defect list entries (or worse, an increasing number of them) is at risk. Currently the first invocation of smartctl causes this: scsi: unknown opcode 0x37 message to appear the console and in the log. The READ DEFECT DATA SCSI command does not change the state of a disk. Its opcode (0x37) is valid for SBC devices (e.g. disks) and SMC-2 devices (media changers) where it is called INITIALIZE STATUS ELEMENT WITH RANGE and again doesn't change the external state of the device. Changelog: - mark SCSI opcode 0x37 (READ DEFECT DATA) as safe_for_read Signed-off-by: NDouglas Gilbert <dougg@torque.net> Acked-by: NJens Axboe <axboe@suse.de> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 20 6月, 2005 5 次提交
-
-
由 James Bottomley 提交于
Original From: Mike Christie <michaelc@cs.wisc.edu> Modified to split out block changes (this patch) and SCSI pieces. Signed-off-by: NJens Axboe <axboe@suse.de> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Jens Axboe 提交于
Signed-off-by: NJens Axboe <axboe@suse.de>
-
由 James Bottomley 提交于
Signed-off-by: NJens Axboe <axboe@suse.de>
-
由 James Bottomley 提交于
Signed-off-by: NJens Axboe <axboe@suse.de>
-
由 Jens Axboe 提交于
Change the blk_rq_map_user() and blk_rq_map_kern() interface to require a previously allocated request to be passed in. This is both more efficient for multiple iterations of mapping data to the same request, and it is also a much nicer API. Signed-off-by: NJens Axboe <axboe@suse.de>
-