- 31 10月, 2005 40 次提交
-
-
由 Pekka Enberg 提交于
This patch removes duplicate directory scanning code from fs/fat/dir.c. The two functions that share identical code are fat_readdirx() and fat_search_long(). This patch also renames fat_readdirx to __fat_readdir(). Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 OGAWA Hirofumi 提交于
Now, vfat_rename() is using vfat_find() for sanity check. This removes that sanity check, the cost of sanity check is too high. Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 OGAWA Hirofumi 提交于
Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Tim Schmielau 提交于
I recently picked up my older work to remove unnecessary #includes of sched.h, starting from a patch by Dave Jones to not include sched.h from module.h. This reduces the number of indirect includes of sched.h by ~300. Another ~400 pointless direct includes can be removed after this disentangling (patch to follow later). However, quite a few indirect includes need to be fixed up for this. In order to feed the patches through -mm with as little disturbance as possible, I've split out the fixes I accumulated up to now (complete for i386 and x86_64, more archs to follow later) and post them before the real patch. This way this large part of the patch is kept simple with only adding #includes, and all hunks are independent of each other. So if any hunk rejects or gets in the way of other patches, just drop it. My scripts will pick it up again in the next round. Signed-off-by: NTim Schmielau <tim@physik3.uni-rostock.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Paul E. McKenney 提交于
Combine a bit of redundant code between force_sig_info() and force_sig_specific(). Signed-off-by: paulmck@us.ibm.com Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Oleg Nesterov 提交于
This patch removes checks for ->si_code == SI_TIMER from send_signal, specific_send_sig_info, __group_send_sig_info. I think posix-timers.c used these functions some time ago, now it sends signals via send_{,group_}sigqueue, so these hooks are unneeded. Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Oleg Nesterov 提交于
This patch simplifies some checks for magic siginfo values. It should not change the behaviour in any way. Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Oleg Nesterov 提交于
This patch replaces hardcoded SEND_SIG_xxx constants with their symbolic names. No changes in affected .o files. Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Randy Dunlap 提交于
- Use kzalloc() instead of kmalloc + memset. - Clean/fix some printk's. - Use NULL for pointers instead of 0. - Combine hpet busy searching locations into a function call. Signed-off-by: NRandy Dunlap <randy_d_dunlap@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Randy Dunlap 提交于
- Use HPET physical address to detect duplicates, not logical addresses. Using logical (mapped) addresses fails to detect duplicates because ioremap() returns a new mapped address each time. - iounmap() regions when duplicate/busy areas are found. Signed-off-by: NRandy Dunlap <randy_d_dunlap@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Randy Dunlap 提交于
Allow the ACPI HPET description table to use a resource type of FIXED_MEM32 for the HPET reource. Use the fixed resoure size of 1 KB for the HPET resource as per the HPET spec. Signed-off-by: NRandy Dunlap <randy_d_dunlap@linux.intel.com> Acked-by: NBob Picco <bob.picco@hp.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Clemens Ladisch 提交于
When booting, display the timer frequency in Hertz instead of as tick length in nanoseconds. Apart from saving a local variable, this makes the message more easily comprehensible. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Clemens Ladisch 提交于
In the hpet_ioctl_common() function, devp->hd_hpets is already cached in the hpetp variable, so we can use just that. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Clemens Ladisch 提交于
Fix two instances where a function would access the first HPET device instead of the current one. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Clemens Ladisch 提交于
Clear the ht_opaque field in the hpet_register() function before searching for a free timer to prevent the function from incorrectly assuming that the search succeeded afterwards. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Clemens Ladisch 提交于
Fix a division by zero that happened when the HPET_INFO ioctl was called before a timer frequency had been set. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Clemens Ladisch 提交于
Fix a wrong memory access in hpet_ioctl_common(). It was not possible to use the HPET_INFO ioctl from kernel space because it always called copy_to_user(). Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Clemens Ladisch 提交于
Reads from an HPET register require a round trip to the south bridge and are almost as slow as PCI reads. By caching the last value we've written to the comparator register, we can eliminate all HPET reads from the fast path in the emulated RTC interrupt handler. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Acked-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Clemens Ladisch 提交于
Make sure that the RTC timer is in non-periodic mode; some stupid BIOS might have initialized it to periodic mode. Furthermore, don't set the SETVAL bit in the config register. This wouldn't have any effect unless the timer was in period mode (which it isn't), and then the actual timer frequency would be half that of the desired one because incrementing the comparator in the interrupt handler would be done after the hardware has already incremented it itself. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Acked-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Clemens Ladisch 提交于
When the emulated RTC interrupt is no longer needed, we better disable it; otherwise, we get a spurious interrupt whenever the timer has rolled over and reaches the same comparator value. Having a superfluous interrupt every five minutes doesn't hurt much, but it's bad style anyway. ;-) Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Acked-by: N"Pallipadi, Venkatesh" <venkatesh.pallipadi@intel.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Clemens Ladisch 提交于
This patch adds support for shared HPET interrupts. The driver previously acknowledged interrupts for both edge and level interrupts, but didn't actually allow a shared interrupt in the latter case. We use a new per-timer flag to save whether the timer's interrupt might be shared, and use it to do the processing required for level interrupts only if necessary. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Acked-by: NBob Picco <bob.picco@hp.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Clemens Ladisch 提交于
It was only the RTC hardware that restricted interrupt frequencies to a power of two. There is no reason to take over this restriction into the HPET driver, so remove the offending check. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Acked-by: NBob Picco <bob.picco@hp.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Clemens Ladisch 提交于
This patch removes several reads of a timer's config register that serve no purpose whatsoever. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Acked-by: NBob Picco <bob.picco@hp.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Clemens Ladisch 提交于
The variable hpet_ntimer is never read, so remove it. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Acked-by: NBob Picco <bob.picco@hp.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Clemens Ladisch 提交于
On 32-bit architectures, the multiplication in the argument for hpet_time_div() often overflows. In the typical case of a 14.32 MHz timer, this happens when the desired frequency exceeds 61 Hz. To avoid this multiplication, we can precompute and store the hardware timer frequency, instead of the period, in the device structure, which leaves us with a simple division when computing the number of timer ticks. As a side effect, this also removes a theoretical bug where the timer interpolator's frequency would be computed as a 32-bit value even if the HPET frequency is greater than 2^32 Hz (the HPET spec allows up to 10 GHz). Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Clemens Ladisch 提交于
Disallow setting an interrupt frequency of zero (which would result in a division by zero), and disallow enabling the interrupt when the frequency hasn't yet been set (which would use an interrupt period of zero). Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Randy Dunlap 提交于
Convert most of the remaining "Using plain integer as NULL pointer" sparse warnings to use NULL. (Not duplicating patches that are already in -mm, -bird, or -kj.) Convert isdn driver struct initializer to use C99 syntax. Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
- Various whitespace fixes - Use kzalloc() Acked-by: NKylene Hall <kjhall@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Marcel Selhorst 提交于
Move the Infineon TPM driver off pci device and makes it a pure pnp-driver. It includes pnp-port validation and region requesting. Signed-off-by: NMarcel Selhorst <selhorst@crypto.rub.de> Signed-off-by: NKylene Hall <kjhall@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Kylene Jo Hall 提交于
This patch changes the nsc driver from a pci driver to a platform driver. Signed-off-by: NKylene Hall <kjhall@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Kylene Jo Hall 提交于
This patch changes the atmel driver from a pci driver to a platform driver. Signed-off-by: NKylene Hall <kjhall@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Kylene Jo Hall 提交于
This patch is in support of moving away from the lpc bus pci_dev. The power management prototypes used by platform drivers is different but the functionality remains the same. Signed-off-by: Kylene Hall <kjhall@us.ibm.com Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Kylene Jo Hall 提交于
Since the tpm does not have it's own pci id we have been consuming the lpc bus. This is not correct and causes problems to support non lpc bus chips. This patch removes the dependency on pci_dev from tpm.c The subsequent patches will stop the supported chips from registering as pci drivers. Signed-off-by: NKylene Hall <kjhall@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Kylene Jo Hall 提交于
This patch is in preparation of supporting chips that are not necessarily on the lpc bus and thus are not accessed with inb's and outb's. The patch replaces the call to get the chip's status in the tpm.c file with a vendor specific status function. The patch also defines the function for each of the current supported devices. Signed-off-by: NKylene Hall <kjhall@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
It's nasty to set random drivers to default m because people who just press enter on make oldconfig get these. Remove the default m Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Paul Jackson 提交于
Simplify the UP (1 CPU) implementatin of set_cpus_allowed. The one CPU is hardcoded to be cpu 0 - so just test for that bit, and avoid having to pick up the cpu_online_map. Also, unexport cpu_online_map: it was only needed for set_cpus_allowed(). Signed-off-by: NPaul Jackson <pj@sgi.com> Acked-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Yuri Vasilevski 提交于
I made a patch that detects if libintl.h (needed for nls) is present on the host system and if it's not, it nls support is disabled by providing dummies for the used nls functions. This way if there is nls support on the host system the *config targets will build according to Arnaldo Carvalho de Melo's i18n modifications, else it just uses the original English messages. I have also made a bug report at kernel's bugzilla: http://bugzilla.kernel.org/show_bug.cgi?id=5501 And there is a discussion about this problem in Gentoo's bugzilla: http://bugs.gentoo.org/show_bug.cgi?id=99810 Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Horms 提交于
Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Paul Jackson 提交于
A couple of (char *) casts removed in a previous cleanup patch in lib/string.c:memmove() were actually useful, as they suppressed a couple of warnings: assignment discards qualifiers from pointer target type Fix by declaring the local variable const in the first place, so casts aren't needed to strip the const qualifier. Signed-off-by: NPaul Jackson <pj@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Matt Mackall 提交于
From: Hareesh Nagarajan <hnagar2@gmail.com> Signed-off-by: NHareesh Nagarajan <hnagar2@gmail.com> Acked-by: NMatt Mackall <mpm@selenic.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-