In case the driver is not probed - due to config mismatches or errors
in the DTS files - dev_get_drvdata() returns NULL, leading to an Ooops
during boot.

Make elm_config() return an error in such cases to propagate the error
up to the user, so it can fall back to software mode.
Signed-off-by: NDaniel Mack <zonque@gmail.com>
Acked-by: NPeter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Variable "onfi_version" is already set to zero before nand_flash_detect_onfi()
call, so additional cleaning is not necessary.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Acked-by: NBrian Norris <computersforpeace@gmail.com>
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

NAND command, passed to cmd_ctrl(), is masked with 0xff. This patch
removes this since masking is not necessary and masking is not performed
in other places for same call.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

This device was reported over a year ago on OpenWrt mailing list in the
thread [OpenWrt-Devel] RedBoot partition table with winbond m25q128vb
(unfortunately, I can't find message id). Macpaul seemed to have
problems with partition driver, but it seems the device was working OK.
Reported-by: NMacpaul Lin <macpaul@gmail.com>
Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

kfree on NULL pointer is a no-op.
Signed-off-by: NSyam Sidhardhan <s.syam@samsung.com>
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: NKrzysztof Mazur <krzysiek@podlesie.net>
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Not all SST devices implement the SST byte programming command.
Some devices (like SST25VF064C) implement only standard m25p80 page
write command.

Now SPI flash devices that need sst_write() are explicitly marked
with new SST_WRITE flag and the decision to use sst_write() is based
on this flag instead of manufacturer id.
Signed-off-by: NKrzysztof Mazur <krzysiek@podlesie.net>
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Previously, partitions were limited to less than 4 GiB in size because
the address and size were read as 32-bit values. Add support for 64-bit
values to support devices of 4 GiB and larger.
Signed-off-by: NJoe Schaack <jschaack@xes-inc.com>
Signed-off-by: NNate Case <ncase@xes-inc.com>
Signed-off-by: NAaron Sierra <asierra@xes-inc.com>
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: NBrian Norris <computersforpeace@gmail.com>
Acked-by: NPeter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

These drivers are deprecated for very long time, and we have a different driver
for these called "diskonchip". Thus, kill the ancient cruft.
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Up until now we identified NAND chips by the 'device ID' part of the full chip
ID array, which is the second full ID array byte. However, the newest flashes
use the same device ID for chips with identical page and eraseblock sizes, but
different OOB sizes. And unfortunately, it is not clear if there is a
"standard" way to fetch the OOB size from chip's full ID array. Here is an
example:

Toshiba TC58NVG2S0F: 0x98, 0xdc, 0x90, 0x26, 0x76, 0x15, 0x01, 0x08
Toshiba TC58NVG3S0F: 0x98, 0xd3, 0x90, 0x26, 0x76, 0x15, 0x02, 0x08

The first one is a 512MiB NAND chip with 4KiB NAND pages, 256KiB eraseblock
size and 224 bytes OOB. The second one is a 1GiB NAND chip with the same page
and eraseblock sizes, but with 232 bytes OOB.

This means that we have to store full ID in our NAND flashes table in order to
distinguish between these 2.

This patch adds the 'id[8]' field to the 'struct nand_flash_dev' structure, and
it makes it to be a part of anonymous union, where the second member is a
structure containing the 'mfr_id' and 'dev_id' bytes. The union makes sure that
'mfr_id' refers the same RAM address as 'id[0]' and 'dev_id' refers the same
RAM address as 'id[1]'. The only motivation for the union is an assumption that
'type->dev_id' is more readable than 'type->id[1]'.
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Introduce helper macros for defining NAND chips. These macros do not really add
much value in the current code-base. However, we are going to add full ID
support which adds some more complexity to the table, and helper macros become
useful for readability.
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

NAND flashes with 256 bytes NAND pages are so old that probably do not exist
any more. Let's remove few related pieces of code and forget about them
forever. The assumption will be that 512 bytes NAND page size is the minimum
possible.
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

The 'id' is a bit confusing name because NAND IDs are multi-byte. Re-name
it to 'dev_id' to make it clear that this is the "device ID" part (the second
byte).

While on it, clean-up the commentary for 'struct nand_flash_dev'.
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
Acked-by: NBrian Norris <computersforpeace@gmail.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

We have this unused macro, let's use it and justify its existence.
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
Acked-by: NBrian Norris <computersforpeace@gmail.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

It is unused.
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
Acked-by: NBrian Norris <computersforpeace@gmail.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

It is not used anywhere.
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
Acked-by: NBrian Norris <computersforpeace@gmail.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
Acked-by: NBrian Norris <computersforpeace@gmail.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

We have only one AG-AND driver and it was not touched since 2005. It looks
like AG-AND was not really make it to mass-production and can be considered
a dead technology.

Along with the AG-AND support, this patch removes the BBT_AUTO_REFRESH feature,
because the only user of this feature is AG-AND. And even though it is
implemented as a generic feature, I prefer to remove it because NAND flashes do
not really need it in this form.
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
Acked-by: NBrian Norris <computersforpeace@gmail.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

The AG-AND support is about to be removed from MTD, because this technology is
dead for long time. Thus, remove this the only AG-AND driver we have in the
kernel tree.
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
Acked-by: NBrian Norris <computersforpeace@gmail.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

The MTD_NAND_MUSEUM_IDS configuration options was removed - update the
lpc32xx_defconfig file.
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
Acked-by: NBrian Norris <computersforpeace@gmail.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

The MTD subsystem has its own small museum of ancient NANDs in a form of the
CONFIG_MTD_NAND_MUSEUM_IDS configuration option. The museum contains stone age
NANDs with 256 bytes pages, as well as iron age NANDs with 512 bytes per page
and up to 8MiB page size.

It is with great sorrow that I inform you that the museum is being
decommissioned. The MTD subsystem is out of budget for Kconfig options and
already has too many of them, and there is a general kernel trend to simplify
the configuration menu.

We remove the stone age exhibits along with closing the museum, but some of the
iron age ones are transferred to the regular NAND depot. Namely, only those
which have unique device IDs are transferred, and the ones which have
conflicting device IDs are removed.
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Clean-up the code a little bit:
  * clean-up commentaries.
  * move macro definitions to the top of the file.
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
Acked-by: NBrian Norris <computersforpeace@gmail.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Before this patch mtd_read_fact_prot_reg was used to check availability
for both MTD_OTP_FACTORY and MTD_OTP_USER access. This made accessing
user otp for chips that don't have a factory otp area impossible. So use
the right wrapper depending on the intended area to be accessed.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Pull MTD fixes from David Woodhouse:
 "This fixes a couple of problems.  Firstly, some people are actually
  still using old small-page flash and we broke it by removing the ready
  check.

  Secondly.  fix the handling of partitions on Broadcom 47xx devices.
  Recent changes had made it misdetect the location of the NVRAM and
  scribble over the bootloader when it tried to update the variables
  there.  With predictably sad results."

* tag 'for-linus-20130318' of git://git.infradead.org/linux-mtd:
  mtd: nand: reintroduce NAND_NO_READRDY as NAND_NEED_READRDY
  mtd: bcm47xxpart: look for NVRAM at the end of device
  Revert "mtd: bcm47xxpart: improve probing of nvram partition"

Pull selinux bugfix from James Morris.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  selinux: use GFP_ATOMIC under spin_lock

Pull s390 fixes from Martin Schwidefsky:
 "A couple of bug fixes, the most hairy on is the flush_tlb_kernel_range
  fix.  Another case of "how could this ever have worked?"."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/kdump: Do not add standby memory for kdump
  drivers/i2c: remove !S390 dependency, add missing GENERIC_HARDIRQS dependencies
  s390/scm: process availability
  s390/scm_blk: suspend writes
  s390/scm_drv: extend notify callback
  s390/scm_blk: fix request number accounting
  s390/mm: fix flush_tlb_kernel_range()
  s390/mm: fix vmemmap size calculation
  s390: critical section cleanup vs. machine checks

Pull ARM SoC bug fixes from Arnd Bergmann:
 "Things are calming down for arm-soc as well.  This set of bug fixes is
  dominated in size by the at91 platform bug fixes.  Some of them were
  meant to go through the framebuffer tree during the merge window, but
  since the framebuffer maintainer could not be reached, I offered to
  take them here.  The other notable at91 change is the addition of
  pinctrl definitions to fix the NAND controller.

  The rest are mostly simple regression fixes:

   - Our removal of VIRT_TO_BUS conflicted with Stephen Rothwell's
     renaming of the Kconfig symbol.  You will get a trivial merge
     conflict here, we still want to remove it.
   - missing bits for clocks on imx and s5pv210
   - missing header inclusions in mmp and shmobile
   - typos in s5pv210 camera and vt8500 clock support code

  and three trivial fixes for pre-3.8 bugs:

   - an old bogus build warning in the joystick driver
   - a misleading Kconfig description
   - a NULL pointer check on davinci"

* tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: fix CONFIG_VIRT_TO_BUS handling
  ARM: i.MX35: enable MAX clock
  ARM: Scorpion is a v7 architecture, not v6
  ARM: mmp: add platform_device head file in gplugd
  input/joystick: use get_cycles on ARM
  [media] s5p-fimc: fix s5pv210 build
  clk: vt8500: Fix "fix device clock divisor calculations"
  ARM: i.MX25: Fix DT compilation
  ARM: at91: fix infinite loop in at91_irq_suspend/resume
  ARM: at91: add gpio suspend/resume support when using pinctrl
  ARM: at91: fix LCD-wiring mode
  atmel_lcdfb: fix 16-bpp modes on older SOCs
  ARM: at91: dt: at91sam9x5: complete NAND pinctrl
  ARM: at91: dt: at91sam9x5: correct NAND pins comments
  ARM: davinci: edma: fix dmaengine induced null pointer dereference on da830
  ARM: shmobile: marzen: Include mmc/host.h
  ARM: EXYNOS: Add #dma-cells for generic dma binding support for PL330
  ARM: S5PV210: Fix PL330 DMA controller clkdev entries

Pull powerpc fixes from Ben Herrenschmidt:
 "Here's a few powerpc fixes for 3.9, mostly regressions (though not all
  from 3.9 merge window) that we've been hammering into shape over the
  last couple of weeks.  They fix booting on Cell and G5 among other
  things (yes, we've been a bit sloppy with older machines this time
  around)."

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: Rename USER_ESID_BITS* to ESID_BITS*
  powerpc: Update kernel VSID range
  powerpc: Make VSID_BITS* dependency explicit
  powerpc: Make sure that we alays include CONFIG_BINFMT_ELF
  powerpc/ptrace: Fix brk.len used uninitialised
  powerpc: Fix -mcmodel=medium breakage in prom_init.c
  powerpc: Remove last traces of POWER4_ONLY
  powerpc: Fix cputable entry for 970MP rev 1.0
  powerpc: Fix STAB initialization

Pull ARM fixes from Russell King:
 "Just three fixes this time - a fix for a fix for our memset function,
  fixing the dummy clockevent so that it doesn't interfere with real
  hardware clockevents, and fixing a build error for Tegra."

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: 7675/1: amba: tegra-ahb: Fix build error w/ PM_SLEEP w/o PM_RUNTIME
  ARM: 7674/1: smp: Avoid dummy clockevent being preferred over real hardware clock-event
  ARM: 7670/1: fix the memset fix

887cbce0 "arch Kconfig: centralise CONFIG_ARCH_NO_VIRT_TO_BUS"
and  4febd95a "Select VIRT_TO_BUS directly where needed" from
Stephen Rothwell changed globally how CONFIG_VIRT_TO_BUS is
selected, while my own a5d533ee "ARM: disable virt_to_bus/
virt_to_bus almost everywhere" was merged at the same time and
changed which platforms select it on ARM.

The result of this conflict was that we again see CONFIG_VIRT_TO_BUS
on all ARM systems. This patch fixes up the problem and removes
CONFIG_ARCH_NO_VIRT_TO_BUS again on ARM.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>

The call tree here is:

sk_clone_lock()              <- takes bh_lock_sock(newsk);
xfrm_sk_clone_policy()
__xfrm_sk_clone_policy()
clone_policy()               <- uses GFP_ATOMIC for allocations
security_xfrm_policy_clone()
security_ops->xfrm_policy_clone_security()
selinux_xfrm_policy_clone()
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Cc: stable@kernel.org
Signed-off-by: NJames Morris <james.l.morris@oracle.com>

Merge tag 'renesas-fixes-for-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes

From Simon Horman <horms@verge.net.au>:

Resolve a build failure present since v3.9-rc1

* tag 'renesas-fixes-for-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: marzen: Include mmc/host.h
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Commit 1d9d8639 ("perf,x86: fix kernel crash with PEBS/BTS after
suspend/resume") introduces a link failure since
perf_restore_debug_store() is only defined for CONFIG_CPU_SUP_INTEL:

	arch/x86/power/built-in.o: In function `restore_processor_state':
	(.text+0x45c): undefined reference to `perf_restore_debug_store'

Fix it by defining the dummy function appropriately.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 1d9d8639 ("perf,x86: fix kernel crash with PEBS/BTS after
suspend/resume") fixed a crash when doing PEBS performance profiling
after resuming, but in using init_debug_store_on_cpu() to restore the
DS_AREA mtrr it also resulted in a new WARN_ON() triggering.

init_debug_store_on_cpu() uses "wrmsr_on_cpu()", which in turn uses CPU
cross-calls to do the MSR update.  Which is not really valid at the
early resume stage, and the warning is quite reasonable.  Now, it all
happens to _work_, for the simple reason that smp_call_function_single()
ends up just doing the call directly on the CPU when the CPU number
matches, but we really should just do the wrmsr() directly instead.

This duplicates the wrmsr() logic, but hopefully we can just remove the
wrmsr_on_cpu() version eventually.
Reported-and-tested-by: NParag Warudkar <parag.lkml@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull btrfs fixes from Chris Mason:
 "Eric's rcu barrier patch fixes a long standing problem with our
  unmount code hanging on to devices in workqueue helpers.  Liu Bo
  nailed down a difficult assertion for in-memory extent mappings."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: fix warning of free_extent_map
  Btrfs: fix warning when creating snapshots
  Btrfs: return as soon as possible when edquot happens
  Btrfs: return EIO if we have extent tree corruption
  btrfs: use rcu_barrier() to wait for bdev puts at unmount
  Btrfs: remove btrfs_try_spin_lock
  Btrfs: get better concurrency for snapshot-aware defrag work

Now we use ESID_BITS of kernel address to build proto vsid. So rename
USER_ESIT_BITS to ESID_BITS
Acked-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
CC: <stable@vger.kernel.org> [v3.8]