Instead of calling into kvm_timer_[un]schedule from the main kvm
blocking path, test if the VCPU is on the wait queue from the load/put
path and perform the background timer setup/cancel in this path.

This has the distinct advantage that we no longer race between load/put
and schedule/unschedule and programming and canceling of the bg_timer
always happens when the timer state is not loaded.

Note that we must now remove the checks in kvm_timer_blocking that do
not schedule a background timer if one of the timers can fire, because
we no longer have a guarantee that kvm_vcpu_check_block() will be called
before kvm_timer_blocking.
Reported-by: NAndre Przywara <andre.przywara@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

In preparation for nested virtualization where we are going to have more
than a single VMID per VM, let's factor out the VMID data into a
separate VMID data structure and change the VMID allocator to operate on
this new structure instead of using a struct kvm.

This also means that udate_vttbr now becomes update_vmid, and that the
vttbr itself is generated on the fly based on the stage 2 page table
base address and the vmid.

We cache the physical address of the pgd when allocating the pgd to
avoid doing the calculation on every entry to the guest and to avoid
calling into potentially non-hyp-mapped code from hyp/EL2.

If we wanted to merge the VMID allocator with the arm64 ASID allocator
at some point in the future, it should actually become easier to do that
after this patch.

Note that to avoid mapping the kvm_vmid_bits variable into hyp, we
simply forego the masking of the vmid value in kvm_get_vttbr and rely on
update_vmid to always assign a valid vmid value (within the supported
range).
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
[maz: minor cleanups]
Reviewed-by: NJulien Thierry <julien.thierry@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

We currently eagerly save/restore MPIDR. It turns out to be
slightly pointless:
- On the host, this value is known as soon as we're scheduled on a
  physical CPU
- In the guest, this value cannot change, as it is set by KVM
  (and this is a read-only register)

The result of the above is that we can perfectly avoid the eager
saving of MPIDR_EL1, and only keep the restore. We just have
to setup the host contexts appropriately at boot time.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Acked-by: NChristoffer Dall <christoffer.dall@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@arm.com>

Until now, we haven't differentiated between HYP calls that
have a return value and those who don't. As we're about to
change this, introduce kvm_call_hyp_ret(), and change all
call sites that actually make use of a return value.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Acked-by: NChristoffer Dall <christoffer.dall@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@arm.com>

Patch series "Add support for fast mremap".

This series speeds up the mremap(2) syscall by copying page tables at
the PMD level even for non-THP systems.  There is concern that the extra
'address' argument that mremap passes to pte_alloc may do something
subtle architecture related in the future that may make the scheme not
work.  Also we find that there is no point in passing the 'address' to
pte_alloc since its unused.  This patch therefore removes this argument
tree-wide resulting in a nice negative diff as well.  Also ensuring
along the way that the enabled architectures do not do anything funky
with the 'address' argument that goes unnoticed by the optimization.

Build and boot tested on x86-64.  Build tested on arm64.  The config
enablement patch for arm64 will be posted in the future after more
testing.

The changes were obtained by applying the following Coccinelle script.
(thanks Julia for answering all Coccinelle questions!).
Following fix ups were done manually:
* Removal of address argument from  pte_fragment_alloc
* Removal of pte_alloc_one_fast definitions from m68k and microblaze.

// Options: --include-headers --no-includes
// Note: I split the 'identifier fn' line, so if you are manually
// running it, please unsplit it so it runs for you.

virtual patch

@pte_alloc_func_def depends on patch exists@
identifier E2;
identifier fn =~
"^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$";
type T2;
@@

 fn(...
- , T2 E2
 )
 { ... }

@pte_alloc_func_proto_noarg depends on patch exists@
type T1, T2, T3, T4;
identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$";
@@

(
- T3 fn(T1, T2);
+ T3 fn(T1);
|
- T3 fn(T1, T2, T4);
+ T3 fn(T1, T2);
)

@pte_alloc_func_proto depends on patch exists@
identifier E1, E2, E4;
type T1, T2, T3, T4;
identifier fn =~
"^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$";
@@

(
- T3 fn(T1 E1, T2 E2);
+ T3 fn(T1 E1);
|
- T3 fn(T1 E1, T2 E2, T4 E4);
+ T3 fn(T1 E1, T2 E2);
)

@pte_alloc_func_call depends on patch exists@
expression E2;
identifier fn =~
"^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$";
@@

 fn(...
-,  E2
 )

@pte_alloc_macro depends on patch exists@
identifier fn =~
"^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$";
identifier a, b, c;
expression e;
position p;
@@

(
- #define fn(a, b, c) e
+ #define fn(a, b) e
|
- #define fn(a, b) e
+ #define fn(a) e
)

Link: http://lkml.kernel.org/r/20181108181201.88826-2-joelaf@google.comSigned-off-by: NJoel Fernandes (Google) <joel@joelfernandes.org>
Suggested-by: NKirill A. Shutemov <kirill@shutemov.name>
Acked-by: NKirill A. Shutemov <kirill@shutemov.name>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The patch is to make kvm_set_spte_hva() return int and caller can
check return value to determine flush tlb or not.
Signed-off-by: NLan Tianyu <Tianyu.Lan@microsoft.com>
Acked-by: NPaul Mackerras <paulus@ozlabs.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

32 and 64bit use different symbols to identify the traps.
32bit has a fine grained approach (prefetch abort, data abort and HVC),
while 64bit is pretty happy with just "trap".

This has been fine so far, except that we now need to decode some
of that in tracepoints that are common to both architectures.

Introduce ARM_EXCEPTION_IS_TRAP which abstracts the trap symbols
and make the tracepoint use it.
Acked-by: NChristoffer Dall <christoffer.dall@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

There are two things we need to take care of when we create block
mappings in the stage 2 page tables:

  (1) The alignment within a PMD between the host address range and the
  guest IPA range must be the same, since otherwise we end up mapping
  pages with the wrong offset.

  (2) The head and tail of a memory slot may not cover a full block
  size, and we have to take care to not map those with block
  descriptors, since we could expose memory to the guest that the host
  did not intend to expose.

So far, we have been taking care of (1), but not (2), and our commentary
describing (1) was somewhat confusing.

This commit attempts to factor out the checks of both into a common
function, and if we don't pass the check, we won't attempt any PMD
mappings for neither hugetlbfs nor THP.

Note that we used to only check the alignment for THP, not for
hugetlbfs, but as far as I can tell the check needs to be applied to
both scenarios.

Cc: Ralph Palutke <ralph.palutke@fau.de>
Cc: Lukas Braun <koomi@moshbit.net>
Reported-by: NLukas Braun <koomi@moshbit.net>
Signed-off-by: NChristoffer Dall <christoffer.dall@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

We currently only halt the guest when a vCPU messes with the active
state of an SPI. This is perfectly fine for GICv2, but isn't enough
for GICv3, where all vCPUs can access the state of any other vCPU.

Let's broaden the condition to include any GICv3 interrupt that
has an active state (i.e. all but LPIs).

Cc: stable@vger.kernel.org
Reviewed-by: NChristoffer Dall <christoffer.dall@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

kvm_timer_vcpu_terminate can only be called in two scenarios:

 1. As part of cleanup during a failed VCPU create
 2. As part of freeing the whole VM (struct kvm refcount == 0)

In the first case, we cannot have programmed any timers or mapped any
IRQs, and therefore we do not have to cancel anything or unmap anything.

In the second case, the VCPU will have gone through kvm_timer_vcpu_put,
which will have canceled the emulated physical timer's hrtimer, and we
do not need to that here as well.  We also do not care if the irq is
recorded as mapped or not in the VGIC data structure, because the whole
VM is going away.  That leaves us only with having to ensure that we
cancel the bg_timer if we were blocking the last time we called
kvm_timer_vcpu_put().
Signed-off-by: NChristoffer Dall <christoffer.dall@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

The use of a work queue in the hrtimer expire function for the bg_timer
is a leftover from the time when we would inject interrupts when the
bg_timer expired.

Since we are no longer doing that, we can instead call
kvm_vcpu_wake_up() directly from the hrtimer function and remove all
workqueue functionality from the arch timer code.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

The kvm_exit tracepoint strangely always reported exits as being IRQs.
This seems to be because either the __print_symbolic or the tracepoint
macros use a variable named idx.

Take this chance to update the fields in the tracepoint to reflect the
concepts in the arm64 architecture that we pass to the tracepoint and
move the exception type table to the same location and header files as
the exits code.

We also clear out the exception code to 0 for IRQ exits (which
translates to UNKNOWN in text) to make it slighyly less confusing to
parse the trace output.
Signed-off-by: NChristoffer Dall <christoffer.dall@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

When checking if there are any pending IRQs for the VM, consider the
active state and priority of the IRQs as well.

Otherwise we could be continuously scheduling a guest hypervisor without
it seeing an IRQ.
Signed-off-by: NChristoffer Dall <christoffer.dall@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

When using the nospec API, it should be taken into account that:

"...if the CPU speculates past the bounds check then
 * array_index_nospec() will clamp the index within the range of [0,
 * size)."

The above is part of the header for macro array_index_nospec() in
linux/nospec.h

Now, in this particular case, if intid evaluates to exactly VGIC_MAX_SPI
or to exaclty VGIC_MAX_PRIVATE, the array_index_nospec() macro ends up
returning VGIC_MAX_SPI - 1 or VGIC_MAX_PRIVATE - 1 respectively, instead
of VGIC_MAX_SPI or VGIC_MAX_PRIVATE, which, based on the original logic:

	/* SGIs and PPIs */
	if (intid <= VGIC_MAX_PRIVATE)
 		return &vcpu->arch.vgic_cpu.private_irqs[intid];

 	/* SPIs */
	if (intid <= VGIC_MAX_SPI)
 		return &kvm->arch.vgic.spis[intid - VGIC_NR_PRIVATE_IRQS];

are valid values for intid.

Fix this by calling array_index_nospec() macro with VGIC_MAX_PRIVATE + 1
and VGIC_MAX_SPI + 1 as arguments for its parameter size.

Fixes: 41b87599 ("KVM: arm/arm64: vgic: fix possible spectre-v1 in vgic_get_irq()")
Cc: stable@vger.kernel.org
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
[dropped the SPI part which was fixed separately]
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

SPIs should be checked against the VMs specific configuration, and
not the architectural maximum.

Cc: stable@vger.kernel.org
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

In attempting to re-construct the logic for our stage 2 page table
layout I found the reasoning in the comment explaining how we calculate
the number of levels used for stage 2 page tables a bit backwards.

This commit attempts to clarify the comment, to make it slightly easier
to read without having the Arm ARM open on the right page.

While we're at it, fixup a typo in a comment that was recently changed.
Reviewed-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

To change the active state of an MMIO, halt is requested for all vcpus of
the affected guest before modifying the IRQ state. This is done by calling
cond_resched_lock() in vgic_mmio_change_active(). However interrupts are
disabled at this point and we cannot reschedule a vcpu.

We actually don't need any of this, as kvm_arm_halt_guest ensures that
all the other vcpus are out of the guest. Let's just drop that useless
code.
Signed-off-by: NJulien Thierry <julien.thierry@arm.com>
Suggested-by: NChristoffer Dall <christoffer.dall@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

KVM only supports PMD hugepages at stage 2. Now that the various page
handling routines are updated, extend the stage 2 fault handling to
map in PUD hugepages.

Addition of PUD hugepage support enables additional page sizes (e.g.,
1G with 4K granule) which can be useful on cores that support mapping
larger block sizes in the TLB entries.
Signed-off-by: NPunit Agrawal <punit.agrawal@arm.com>
Reviewed-by: NChristoffer Dall <christoffer.dall@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
[ Replace BUG() => WARN_ON(1) for arm32 PUD helpers ]
Signed-off-by: NSuzuki Poulose <suzuki.poulose@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

In preparation for creating larger hugepages at Stage 2, add support
to the age handling notifiers for PUD hugepages when encountered.

Provide trivial helpers for arm32 to allow sharing code.
Signed-off-by: NPunit Agrawal <punit.agrawal@arm.com>
Reviewed-by: NChristoffer Dall <christoffer.dall@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
[ Replaced BUG() => WARN_ON(1) for arm32 PUD helpers ]
Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

In preparation for creating larger hugepages at Stage 2, extend the
access fault handling at Stage 2 to support PUD hugepages when
encountered.

Provide trivial helpers for arm32 to allow sharing of code.
Signed-off-by: NPunit Agrawal <punit.agrawal@arm.com>
Reviewed-by: NChristoffer Dall <christoffer.dall@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
[ Replaced BUG() => WARN_ON(1) in PUD helpers ]
Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

In preparation for creating PUD hugepages at stage 2, add support for
detecting execute permissions on PUD page table entries. Faults due to
lack of execute permissions on page table entries is used to perform
i-cache invalidation on first execute.

Provide trivial implementations of arm32 helpers to allow sharing of
code.
Signed-off-by: NPunit Agrawal <punit.agrawal@arm.com>
Reviewed-by: NChristoffer Dall <christoffer.dall@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
[ Replaced BUG() => WARN_ON(1) in arm32 PUD helpers ]
Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

In preparation for creating PUD hugepages at stage 2, add support for
write protecting PUD hugepages when they are encountered. Write
protecting guest tables is used to track dirty pages when migrating
VMs.

Also, provide trivial implementations of required kvm_s2pud_* helpers
to allow sharing of code with arm32.
Signed-off-by: NPunit Agrawal <punit.agrawal@arm.com>
Reviewed-by: NChristoffer Dall <christoffer.dall@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
[ Replaced BUG() => WARN_ON() in arm32 pud helpers ]
Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Introduce helpers to abstract architectural handling of the conversion
of pfn to page table entries and marking a PMD page table entry as a
block entry.

The helpers are introduced in preparation for supporting PUD hugepages
at stage 2 - which are supported on arm64 but do not exist on arm.
Signed-off-by: NPunit Agrawal <punit.agrawal@arm.com>
Reviewed-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: NChristoffer Dall <christoffer.dall@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Stage 2 fault handler marks a page as executable if it is handling an
execution fault or if it was a permission fault in which case the
executable bit needs to be preserved.

The logic to decide if the page should be marked executable is
duplicated for PMD and PTE entries. To avoid creating another copy
when support for PUD hugepages is introduced refactor the code to
share the checks needed to mark a page table entry as executable.
Signed-off-by: NPunit Agrawal <punit.agrawal@arm.com>
Reviewed-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: NChristoffer Dall <christoffer.dall@arm.com>
Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

The code for operations such as marking the pfn as dirty, and
dcache/icache maintenance during stage 2 fault handling is duplicated
between normal pages and PMD hugepages.

Instead of creating another copy of the operations when we introduce
PUD hugepages, let's share them across the different pagesizes.
Signed-off-by: NPunit Agrawal <punit.agrawal@arm.com>
Reviewed-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: NChristoffer Dall <christoffer.dall@arm.com>
Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

When restoring the active state from userspace, we don't know which CPU
was the source for the active state, and this is not architecturally
exposed in any of the register state.

Set the active_source to 0 in this case.  In the future, we can expand
on this and exposse the information as additional information to
userspace for GICv2 if anyone cares.

Cc: stable@vger.kernel.org
Signed-off-by: NChristoffer Dall <christoffer.dall@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

We recently addressed a VMID generation race by introducing a read/write
lock around accesses and updates to the vmid generation values.

However, kvm_arch_vcpu_ioctl_run() also calls need_new_vmid_gen() but
does so without taking the read lock.

As far as I can tell, this can lead to the same kind of race:

  VM 0, VCPU 0			VM 0, VCPU 1
  ------------			------------
  update_vttbr (vmid 254)
  				update_vttbr (vmid 1) // roll over
				read_lock(kvm_vmid_lock);
				force_vm_exit()
  local_irq_disable
  need_new_vmid_gen == false //because vmid gen matches

  enter_guest (vmid 254)
  				kvm_arch.vttbr = <PGD>:<VMID 1>
				read_unlock(kvm_vmid_lock);

  				enter_guest (vmid 1)

Which results in running two VCPUs in the same VM with different VMIDs
and (even worse) other VCPUs from other VMs could now allocate clashing
VMID 254 from the new generation as long as VCPU 0 is not exiting.

Attempt to solve this by making sure vttbr is updated before another CPU
can observe the updated VMID generation.

Cc: stable@vger.kernel.org
Fixes: f0cf47d9 "KVM: arm/arm64: Close VMID generation race"
Reviewed-by: NJulien Thierry <julien.thierry@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

When we emulate a guest instruction, we don't advance the hardware
singlestep state machine, and thus the guest will receive a software
step exception after a next instruction which is not emulated by the
host.

We bodge around this in an ad-hoc fashion. Sometimes we explicitly check
whether userspace requested a single step, and fake a debug exception
from within the kernel. Other times, we advance the HW singlestep state
rely on the HW to generate the exception for us. Thus, the observed step
behaviour differs for host and guest.

Let's make this simpler and consistent by always advancing the HW
singlestep state machine when we skip an instruction. Thus we can rely
on the hardware to generate the singlestep exception for us, and never
need to explicitly check for an active-pending step, nor do we need to
fake a debug exception from the guest.

Cc: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NChristoffer Dall <christoffer.dall@arm.com>
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

When we emulate an MMIO instruction, we advance the CPU state within
decode_hsr(), before emulating the instruction effects.

Having this logic in decode_hsr() is opaque, and advancing the state
before emulation is problematic. It gets in the way of applying
consistent single-step logic, and it prevents us from being able to fail
an MMIO instruction with a synchronous exception.

Clean this up by only advancing the CPU state *after* the effects of the
instruction are emulated.

Cc: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NChristoffer Dall <christoffer.dall@arm.com>
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

There are two problems with KVM_GET_DIRTY_LOG.  First, and less important,
it can take kvm->mmu_lock for an extended period of time.  Second, its user
can actually see many false positives in some cases.  The latter is due
to a benign race like this:

  1. KVM_GET_DIRTY_LOG returns a set of dirty pages and write protects
     them.
  2. The guest modifies the pages, causing them to be marked ditry.
  3. Userspace actually copies the pages.
  4. KVM_GET_DIRTY_LOG returns those pages as dirty again, even though
     they were not written to since (3).

This is especially a problem for large guests, where the time between
(1) and (3) can be substantial.  This patch introduces a new
capability which, when enabled, makes KVM_GET_DIRTY_LOG not
write-protect the pages it returns.  Instead, userspace has to
explicitly clear the dirty log bits just before using the content
of the page.  The new KVM_CLEAR_DIRTY_LOG ioctl can also operate on a
64-page granularity rather than requiring to sync a full memslot;
this way, the mmu_lock is taken for small amounts of time, and
only a small amount of time will pass between write protection
of pages and the sending of their content.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When manual dirty log reprotect will be enabled, kvm_get_dirty_log_protect's
pointer argument will always be false on exit, because no TLB flush is needed
until the manual re-protection operation.  Rename it from "is_dirty" to "flush",
which more accurately tells the caller what they have to do with it.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

An SVE system is so far the only case where we mandate VHE. As we're
starting to grow this requirements, let's slightly rework the way we
deal with that situation, allowing for easy extension of this check.
Acked-by: NChristoffer Dall <christoffer.dall@arm.com>
Reviewed-by: NJames Morse <james.morse@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

lockdep_assert_held() is better suited to checking locking requirements,
since it only checks if the current thread holds the lock regardless of
whether someone else does. This is also a step towards possibly removing
spin_is_locked().
Signed-off-by: NLance Roy <ldr709@gmail.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: <kvmarm@lists.cs.columbia.edu>
Signed-off-by: NPaul E. McKenney <paulmck@linux.ibm.com>
Acked-by: NChristoffer Dall <christoffer.dall@arm.com>

The commit 539aee0e ("KVM: arm64: Share the parts of
get/set events useful to 32bit") shares the get/set events
helper for arm64 and arm32, but forgot to share the cap
extension code.

User space will check whether KVM supports vcpu events by
checking the KVM_CAP_VCPU_EVENTS extension
Acked-by: NJames Morse <james.morse@arm.com>
Reviewed-by : Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NDongjiu Geng <gengdongjiu@huawei.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Rename kvm_arch_dev_ioctl_check_extension() to
kvm_arch_vm_ioctl_check_extension(), because it does
not have any relationship with device.

Renaming this function can make code readable.

Cc: James Morse <james.morse@arm.com>
Reviewed-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NDongjiu Geng <gengdongjiu@huawei.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

At boot time, KVM stashes the host MDCR_EL2 value, but only does this
when the kernel is not running in hyp mode (i.e. is non-VHE). In these
cases, the stashed value of MDCR_EL2.HPMN happens to be zero, which can
lead to CONSTRAINED UNPREDICTABLE behaviour.

Since we use this value to derive the MDCR_EL2 value when switching
to/from a guest, after a guest have been run, the performance counters
do not behave as expected. This has been observed to result in accesses
via PMXEVTYPER_EL0 and PMXEVCNTR_EL0 not affecting the relevant
counters, resulting in events not being counted. In these cases, only
the fixed-purpose cycle counter appears to work as expected.

Fix this by always stashing the host MDCR_EL2 value, regardless of VHE.

Cc: Christopher Dall <christoffer.dall@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: stable@vger.kernel.org
Fixes: 1e947bad ("arm64: KVM: Skip HYP setup when already running in HYP")
Tested-by: NRobin Murphy <robin.murphy@arm.com>
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

PageTransCompoundMap() returns true for hugetlbfs and THP
hugepages. This behaviour incorrectly leads to stage 2 faults for
unsupported hugepage sizes (e.g., 64K hugepage with 4K pages) to be
treated as THP faults.

Tighten the check to filter out hugetlbfs pages. This also leads to
consistently mapping all unsupported hugepage sizes as PTE level
entries at stage 2.
Signed-off-by: NPunit Agrawal <punit.agrawal@arm.com>
Reviewed-by: NSuzuki Poulose <suzuki.poulose@arm.com>
Cc: Christoffer Dall <christoffer.dall@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: stable@vger.kernel.org # v4.13+
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

__cpu_init_stage2 doesn't do anything anymore on arm64, and is
totally non-sensical if running VHE (as VHE is 64bit only).
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

VM tends to be a very overloaded term in KVM, so let's keep it
to describe the virtual machine. For the virtual memory setup,
let's use the "stage2" suffix.
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

So far we have restricted the IPA size of the VM to the default
value (40bits). Now that we can manage the IPA size per VM and
support dynamic stage2 page tables, we can allow VMs to have
larger IPA. This patch introduces a the maximum IPA size
supported on the host. This is decided by the following factors :

 1) Maximum PARange supported by the CPUs - This can be inferred
    from the system wide safe value.
 2) Maximum PA size supported by the host kernel (48 vs 52)
 3) Number of levels in the host page table (as we base our
    stage2 tables on the host table helpers).

Since the stage2 page table code is dependent on the stage1
page table, we always ensure that :

  Number of Levels at Stage1 >= Number of Levels at Stage2

So we limit the IPA to make sure that the above condition
is satisfied. This will affect the following combinations
of VA_BITS and IPA for different page sizes.

  Host configuration | Unsupported IPA ranges
  39bit VA, 4K       | [44, 48]
  36bit VA, 16K      | [41, 48]
  42bit VA, 64K      | [47, 52]

Supporting the above combinations need independent stage2
page table manipulation code, which would need substantial
changes. We could purse the solution independently and
switch the page table code once we have it ready.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Christoffer Dall <cdall@kernel.org>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>