[Why]

DCN21 is stable enough to be build by default. So drop the flags.

[How]

Remove them using the unifdef tool. The following commands were executed
in sequence:

$ find -name '*.c' -exec unifdef -m -DCONFIG_DRM_AMD_DC_DCN2_1 -UCONFIG_TRIM_DRM_AMD_DC_DCN2_1 '{}' ';'
$ find -name '*.h' -exec unifdef -m -DCONFIG_DRM_AMD_DC_DCN2_1 -UCONFIG_TRIM_DRM_AMD_DC_DCN2_1 '{}' ';'

In addition:

* Remove from kconfig, and replace any dependencies with DCN1_0.
* Remove from any makefiles.
* Fix and cleanup Renoir definitions in dal_asic_id.h
* Expand DCN1 ifdef to include DCN21 code in the following files:
    * clk_mgr/clk_mgr.c: dc_clk_mgr_create()
    * core/dc_resources.c: dc_create_resource_pool()
    * gpio/hw_factory.c: dal_hw_factory_init()
    * gpio/hw_translate.c: dal_hw_translate_init()
Signed-off-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]

DCN2 and DSC are stable enough to be build by default. So drop the flags.

[How]

Remove them using the unifdef tool. The following commands were executed
in sequence:

$ find -name '*.c' -exec unifdef -m -DCONFIG_DRM_AMD_DC_DSC_SUPPORT -DCONFIG_DRM_AMD_DC_DCN2_0 -UCONFIG_TRIM_DRM_AMD_DC_DCN2_0 '{}' ';'
$ find -name '*.h' -exec unifdef -m -DCONFIG_DRM_AMD_DC_DSC_SUPPORT -DCONFIG_DRM_AMD_DC_DCN2_0 -UCONFIG_TRIM_DRM_AMD_DC_DCN2_0 '{}' ';'

In addition:

* Remove from kconfig, and replace any dependencies with DCN1_0.
* Remove from any makefiles.
* Fix and cleanup NV defninitions in dal_asic_id.h
* Expand DCN1 ifdef to include DCN2 code in the following files:
    * clk_mgr/clk_mgr.c: dc_clk_mgr_create()
    * core/dc_resources.c: dc_create_resource_pool()
    * dce/dce_dmcu.c: dcn20_*lock_phy()
    * dce/dce_dmcu.c: dcn20_funcs
    * dce/dce_dmcu.c: dcn20_dmcu_create()
    * gpio/hw_factory.c: dal_hw_factory_init()
    * gpio/hw_translate.c: dal_hw_translate_init()
Signed-off-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]

On DCN hardware, the crtc_high_irq handler makes vupdate_high_irq
handler redundant.

All the vupdate handler does is handle vblank events, and update vrr
for DCE hw (excluding VEGA, more on that later). As far as usermode is
concerned. vstartup happens close enough to vupdate on DCN that it can
be considered the "same". Handling vblank and updating vrr at vstartup
effectively replaces vupdate on DCN.

Vega is a bit special. Like DCN, the VRR registers on Vega are
double-buffered, and swapped at vupdate. But Unlike DCN, it lacks a
vstartup interrupt. This means we can't quite remove the vupdate handler
for it, since delayed user events due to vrr are sent off there.

[How]

Remove registration of vupdate interrupt handler for DCN. Disable
vupdate interrupt if asic family DCN, enable otherwise.
Reviewed-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]

For DCN hardware, the crtc_high_irq handler is assigned to the vstartup
interrupt. This is different from DCE, which has it assigned to vblank
start.

We'd like to send vblank and user events at vstartup because:

* It happens close enough to vupdate - the point of no return for HW.

* It is programmed as lines relative to vblank end - i.e. it is not in
  the variable portion when VRR is enabled. We should signal user
  events here.

* The pflip interrupt responsible for sending user events today only
  fires if the DCH HUBP component is not clock gated. In situations
  where planes are disabled - but the CRTC is enabled - user events won't
  be sent out, leading to flip done timeouts.

Consequently, this makes vupdate on DCN hardware redundant. It will be
removed in the next change.

[How]

Add a DCN-specific crtc_high_irq handler, and hook it to the VStartup
signal. Inside the DCN handler, we send off user events if the pflip
handler hasn't already done so.
Reviewed-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

1-Read lttpr caps in 5-bytes
2-Parse caps
3-Validate caps and set lttpr_mode
4-Use hw default timeout when lttpr is disabled.
Signed-off-by: Nabdoulaye berthe <abdoulaye.berthe@amd.com>
Reviewed-by: NWenjing Liu <Wenjing.Liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
The aux timeout value is not default before reading link cap.
Setting it to default when lttpr is not enabled causes some monitor
not to light up.

[How]
Read the aux engine timeout value before setting it to extended.
Set the aux engine timeout to its previous value if no lttpr.
Signed-off-by: Nabdoulaye berthe <abdoulaye.berthe@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

1-If at least one repeater is present in the link and we are in non
transparent mode, perform clock recovery then channel equalization
with all repeaters one by one before training DPRX.

2-Mark the end of LT with a repeater by setting training pattern 0
at the end of channel equalization with each repeater.
Signed-off-by: Nabdoulaye berthe <abdoulaye.berthe@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Description]
1-Grant extended timeout request. Done once after detection
2-Configure lttpr mode based on lttpr support before LT
3-Account for lttpr cap when determining max link settings
Signed-off-by: Nabdoulaye berthe <abdoulaye.berthe@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
LTTPR was introduced after DP1.2. Reading LTTPR registers 0xFXXXX
on some DP 1.2 display is causing an unexpected behavior.

[How]
Make sure that we don't read any lttpr registers on 1.2 displays.
Signed-off-by: Nabdoulaye berthe <abdoulaye.berthe@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Description]
When reading link, update the procedure as follows:
1-Set aux timeout to extended: 3.2ms
2-Start with reading lttpr caps
3-Determine if lttpr support should be enabled. Reset aux timeout to
400us if no repeater is found.
Signed-off-by: Nabdoulaye berthe <abdoulaye.berthe@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
We want to guarantee integer ratio scaling for all scaling modes.

[how]
Treat centered, fullscreen, preserve aspect ratio the same: scale
the view as many times as possible, and fill in the rest with a black
border.
Signed-off-by: NReza Amini <Reza.Amini@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
Need it for some OEM I2C devices in Nv10

[how]
Link up code to parse OEM table and expose DC interface
to access the pins
Signed-off-by: NJun Lei <Jun.Lei@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
For debug purpose, we need to check the following hardware status
in DTN log debugfs:
1.dpp & hubp clock enable;
2.crtc blank enable;
3.link phy status;

[How]
Add the upper information in the amdgpu_dm_dtn_log debugfs.

For CRTC blanked status, since DCN2 and greater reports it on the OPP
instead of OTG, we patch it in after calling optc1_read_otg_states.
Ideally, this should be done in the DCN version specific function hooks.
It has been left as a TODO item.
Signed-off-by: NLeo (Hanghong) Ma <hanghong.ma@amd.com>
Reviewed-by: NMikita Lipski <Mikita.Lipski@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: NHarry Wentland <Harry.Wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Reviewed-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
System is unable to enter S0i3 due to DISPLAY_OFF_MASK not asserted
in SMU.

[How]
Optimized bandwidth should be called paired and to resolve unplug
display underflow issue, optimize bandwidth after commit streams is
moved to next page flip, in case of S0i3, there is a change for no
flip coming causing display count is 1 in SMU side.
Add optimize bandwidth after commit stream.
Signed-off-by: NYongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
It has been a useful option in debugging GFXOFF and P.State Change issues.
May be required as for platform specific workaround.

[HOW]
Create option in enum dc_debug_options, "disable_vactive_clock_change".
When it is set, dm_dram_clock_change_vactive, will translate into
p_state_change_support: false.
Signed-off-by: NDavid Galiffi <David.Galiffi@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
It is confusing to sinks if we send VSC SDP only on some format. Today we
signal colorimetry format using MSA while in formats like sRGB.
But when we switch to BT2020 we set the bit to ignore MSA  colorimetry and
instead use the colorimetry information in the VSC SDP.

But if sink supports signaling of colorimetry via VSC SDP we should always
set the MSA MISC1 bit 6, instead of doing so selectively.

[How]
If sink supports signaling of colorimetry via VSC SDP, and we are sending
the colorimetry info via VSC SDP with packet revision 05h, then always
set MSA MISC1 bit 6.
Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
If acquire/release DSC resource sequence is affected by a regression,
it can happen that the already-in-use DSC HW block is being wrongly
re-used for a different pipe. The reverse is also possible, i.e.
already-disabled DSC HW block could be disabled from other context.

[how]
Read back the enable state of DSC HW and report an error if duplicate
enable or disable was attempted.
Signed-off-by: NNikola Cornij <nikola.cornij@amd.com>
Reviewed-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
Currently made a change where disable_output is called using signal_type.
Using actual signal_type when calilng disable_output in power_down_encoders
would make DP to HDMI dongle not light up on boot. As it would have signal_type
SIGNAL_TYPE_DISPLAY_PORT.

[HOW]
Set signal_type to SIGNAL_TYPE_NONE unless it is eDP.
Signed-off-by: NSung Lee <sung.lee@amd.com>
Reviewed-by: NYongqiang Sun <yongqiang.sun@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
For unknown reason, immediate flip with host VM translation on NV12
surface will underflow on last row of PTE.

[How]
Hack chroma viewport height to make fetch one more row of PTE.
Note that this will cause hubp underflow on all video underlay
cases, but the underflow is not user visible since it is in
blank region.
Signed-off-by: NEric Yang <Eric.Yang2@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
V.Active dram clock change workaround need a small modification for DMLv2
to ensure that the dummy p-state check doesn't fail.
Signed-off-by: NDavid Galiffi <David.Galiffi@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Reviewed-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Support for DMUB only depends on support for DC. It doesn't use floating
point so we don't need to guard it by any specific DCN revision.

[How]
Drop the guards and cleanup the newlines around each one.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NHersen Wu <hersenxs.wu@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
DC can utilize the DMUB server to send commands to the DMUB but it's
the DM responsibility to pass it the service to use.

[How]
Create the dc_dmub_srv after we finish initializing the dmub_srv.
Cleanup the dc_dmub_srv before destroying the dmub_srv or dc.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NHersen Wu <hersenxs.wu@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

DC will use DMUB for command submission and flow control during
initialization.

Register offloading as well as submitting some BIOS commands are part
of the DC internal interface but are guarded behind debug options.

It won't be functional in amdgpu_dm yet since we don't pass the
DMUB service to DC for use.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NHersen Wu <hersenxs.wu@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The DMCUB firmware version can be read using the AMDGPU_INFO ioctl
or the amdgpu_firmware_info debugfs entry.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NHersen Wu <hersenxs.wu@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
We need DMCUB on Renoir to support DMCU and PHY initialization.
The DMUB service provides a mechanism to load the DMCUB.

[How]
Include the DMUB service in amdgpu_dm.

Frontdoor loading of the DMCUB firmware needs to happen via PSP. To
pass the firmware to PSP we need to hand it off to the firmware list
in the base driver during software initialization.

Most of the DMUB service can technically be initialized at this point
in time, but we don't want to be allocating framebuffer memory for
hardware that doesn't support the DMCUB and in order to check that we
need to be able to read registers - something DM helpers aren't setup
to do in software initialization.

So everything but the service creation itself will get deferred to
hardware initialization.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NHersen Wu <hersenxs.wu@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
PSP version format is AB.CD.EF.GH, where CD and GH is the main version.
current psp version check for dmcub loading dmcu check 0x00110029, in
case of some psp version eg: 0x00110227 which main version should be
0x00110027, will result in unexpeceted dmcub loading dmcu FW.

[How]
Add psp version mask 0x00FF00FF for checking version.
Signed-off-by: NYongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NHersen Wu <hersenxs.wu@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
DMCU isn't intiliazed properly by dmcub loading due to dmcub initialize
sequence.

[How]
Change dmcu init sequece to meet dmcub initilize.
Signed-off-by: NYongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NHersen Wu <hersenxs.wu@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The DMUB service is the interface to the DMCUB.

It's required to support Renoir features so it will be enabled and
compiled automatically when the Renoir display engine is enabled via
CONFIG_DRM_AMD_DC_DCN2_1.

DMUB code will initially be guarded by CONFIG_DRM_AMD_DC_DMUB and later
switched to CONFIG_DRM_AMD_DC_DCN2_1 with the config option dropped.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NHersen Wu <hersenxs.wu@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The interface to the DMCUB won't be through DC itself. DC will instead
call into the DMUB interface introduced with a future change.

The CONFIG_DRM_AMD_DC_DMUB defines will still be used for now but will
be dropped at the end of the series.

Since this define was never configurable in the first place this code
wasn't used.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NHersen Wu <hersenxs.wu@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

DMCUB ucode requires secure loading through PSP. This is already
supported in PSP as GFX_FW_TYPE_DMUB, it just needs to be mapped from
AMDGPU_UCODE_ID_DMCUB to GFX_FW_TYPE_DMUB.

DMUB is a shorthand name for DMCUB and can be used interchangeably.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NHersen Wu <hersenxs.wu@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The DMCUB is a secondary DMCU (Display MicroController Unit) that has
its own separate firmware. It's required for DMCU support on Renoir.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NHersen Wu <hersenxs.wu@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Currently pointer aconnector is being dereferenced by the call to
to_dm_connector_state before it is being null checked, this could
lead to a null pointer dereference.  Fix this by checking that
aconnector is null before dereferencing it.

Addresses-Coverity: ("Dereference before null check")
Reviewed-by: NMikita Lipski <mikita.lipski@amd.com>
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

- Adding encoder atomic check to find vcpi slots for a connector
- Using DRM helper functions to calculate PBN
- Adding connector atomic check to release vcpi slots if connector
loses CRTC
- Calculate  PBN and VCPI slots only once during atomic
check and store them on crtc_state to eliminate
redundant calculation
- Call drm_dp_mst_atomic_check to verify validity of MST topology
during state atomic check

v2: squashed previous 3 separate patches, removed DSC PBN calculation,
and added PBN and VCPI slots properties to amdgpu connector

v3:
- moved vcpi_slots and pbn properties to dm_crtc_state and dc_stream_state
- updates stream's vcpi_slots and pbn on commit
- separated patch from the DSC MST series

v4:
- set vcpi_slots and pbn properties to dm_connector_state
- copy porperties from connector state on to crtc state

v5:
- keep the pbn and vcpi values only on connnector state
- added a void pointer to the stream state instead on two ints,
because dc_stream_state is OS agnostic. Pointer points to the
current dm_connector_state.

v6:
- Remove new param from stream

v7:
- Fix error with using max capable bpc

v8:
- squash in fix from Gustavo A. R. Silva
Reviewed-by: NLyude Paul <lyude@redhat.com>
Reviewed-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NMikita Lipski <mikita.lipski@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

flush/cancel delayed works before doing finalization
to avoid concurrently requests.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

sysfs interface to read pcie speed&width info on navi1x.

v2: fix warning (trivial)
Signed-off-by: NKenneth Feng <kenneth.feng@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
On Navi10, and presumably arcterus, updating pp_table via sysfs would
not re-scale the maximum possible power limit one can set. On navi10,
the SMU code ignored the power percentage overdrive setting entirely,
and would not allow you to exceed the default power limit at all.

[How]
Adding a function to the SMU interface to get the pptable version of the
default power limit allows ASIC-specific code to provide the correct
maximum-settable power limit for the current pptable.

v3: fix spelling (Alex)
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NMatt Coffin <mcoffin13@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Before this patch, navi10 overdrive settings could not be printed via
pp_od_clk_voltage

[How]
Implement printing for the overdrive settings for the following clocks
in navi10's ppt print_clk_levels implementation:

* SMU_OD_SCLK
* SMU_OD_MCLK
* SMU_OD_VDDC_CURVE
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NMatt Coffin <mcoffin13@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Before this patch, there was no way to set the gfxclk voltage curve in
the overdrive settings for navi10 through pp_od_clk_voltage

[How]
Add the required implementation to navi10's ppt dpm table editing
implementation, similar to the vega20 implementation and interface.
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NMatt Coffin <mcoffin13@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>