stable inclusion
from stable-5.10.5
commit 721972b8665f784f6d840d9ef563a8971565c569
bugzilla: 46931

--------------------------------

commit c9200760 upstream.

Check for valid block size directly by validating s_log_block_size; we
were doing this in two places.  First, by calculating blocksize via
BLOCK_SIZE << s_log_block_size, and then checking that the blocksize
was valid.  And then secondly, by checking s_log_block_size directly.

The first check is not reliable, and can trigger an UBSAN warning if
s_log_block_size on a maliciously corrupted superblock is greater than
22.  This is harmless, since the second test will correctly reject the
maliciously fuzzed file system, but to make syzbot shut up, and
because the two checks are duplicative in any case, delete the
blocksize check, and move the s_log_block_size earlier in
ext4_fill_super().
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Reported-by: syzbot+345b75652b1d24227443@syzkaller.appspotmail.com
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.5
commit 8ed894f1117e5e1347e059943480265e3f8480e3
bugzilla: 46931

--------------------------------

commit dc889b8d upstream.

Make the printk() [bfs "printf" macro] seem less severe by changing
"WARNING:" to "NOTE:".

<asm-generic/bug.h> warns us about using WARNING or BUG in a format string
other than in WARN() or BUG() family macros.  bfs/inode.c is doing just
that in a normal printk() call, so change the "WARNING" string to be
"NOTE".

Link: https://lkml.kernel.org/r/20201203212634.17278-1-rdunlap@infradead.org
Reported-by: syzbot+3fd34060f26e766536ff@syzkaller.appspotmail.com
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: "Tigran A. Aivazian" <aivazian.tigran@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.5
commit fb05e983eaf71f1913151da1b68fdd633957fd38
bugzilla: 46931

--------------------------------

commit 88a06d6f upstream.

The runtime->avail field may be accessed concurrently while some
places refer to it without taking the runtime->lock spinlock, as
detected by KCSAN.  Usually this isn't a big problem, but for
consistency and safety, we should take the spinlock at each place
referencing this field.

Reported-by: syzbot+a23a6f1215c84756577c@syzkaller.appspotmail.com
Reported-by: syzbot+3d367d1df1d2b67f5c19@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20201206083527.21163-1-tiwai@suse.deSigned-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.5
commit cf7fe671cd7eba22a4e4dbcd786fee57669b432b
bugzilla: 46931

--------------------------------

commit 4ebd4703 upstream.

The snd_seq_queue struct contains various flags in the bit fields.
Those are categorized to two different use cases, both of which are
protected by different spinlocks.  That implies that there are still
potential risks of the bad operations for bit fields by concurrent
accesses.

For addressing the problem, this patch rearranges those flags to be
a standard bool instead of a bit field.

Reported-by: syzbot+63cbe31877bb80ef58f5@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20201206083456.21110-1-tiwai@suse.deSigned-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.5
commit 1c5a034710da75d5a422482f5535dda8ab048b60
bugzilla: 46931

--------------------------------

commit e584bbe8 upstream.

syzbot reported a bug which could cause shift-out-of-bounds issue,
fix it.

Call Trace:
 __dump_stack lib/dump_stack.c:79 [inline]
 dump_stack+0x107/0x163 lib/dump_stack.c:120
 ubsan_epilogue+0xb/0x5a lib/ubsan.c:148
 __ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:395
 sanity_check_raw_super fs/f2fs/super.c:2812 [inline]
 read_raw_super_block fs/f2fs/super.c:3267 [inline]
 f2fs_fill_super.cold+0x16c9/0x16f6 fs/f2fs/super.c:3519
 mount_bdev+0x34d/0x410 fs/super.c:1366
 legacy_get_tree+0x105/0x220 fs/fs_context.c:592
 vfs_get_tree+0x89/0x2f0 fs/super.c:1496
 do_new_mount fs/namespace.c:2896 [inline]
 path_mount+0x12ae/0x1e70 fs/namespace.c:3227
 do_mount fs/namespace.c:3240 [inline]
 __do_sys_mount fs/namespace.c:3448 [inline]
 __se_sys_mount fs/namespace.c:3425 [inline]
 __x64_sys_mount+0x27f/0x300 fs/namespace.c:3425
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Reported-by: syzbot+ca9a785f8ac472085994@syzkaller.appspotmail.com
Signed-off-by: NAnant Thazhemadam <anant.thazhemadam@gmail.com>
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.5
commit 2b56f16e3487894dbbb33e0a23d43756af086a81
bugzilla: 46931

--------------------------------

commit d0ac1a26 upstream.

As reported on:
	https://lore.kernel.org/linux-media/20190627222020.45909-1-willemdebruijn.kernel@gmail.com/

if gp8psk_usb_in_op() returns an error, the status var is not
initialized. Yet, this var is used later on, in order to
identify:
	- if the device was already started;
	- if firmware has loaded;
	- if the LNBf was powered on.

Using status = 0 seems to ensure that everything will be
properly powered up.

So, instead of the proposed solution, let's just set
status = 0.
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Reported-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.5
commit f290cffdf761a52b34a405777557d6518b4488ea
bugzilla: 46931

--------------------------------

commit 31dcb6c3 upstream.

A kernel-infoleak was reported by syzbot, which was caused because
dbells was left uninitialized.
Using kzalloc() instead of kmalloc() fixes this issue.

Reported-by: syzbot+a79e17c39564bedf0930@syzkaller.appspotmail.com
Tested-by: syzbot+a79e17c39564bedf0930@syzkaller.appspotmail.com
Signed-off-by: NAnant Thazhemadam <anant.thazhemadam@gmail.com>
Link: https://lore.kernel.org/r/20201122224534.333471-1-anant.thazhemadam@gmail.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.5
commit a021b66961324889ad223607152e8c9db941b03f
bugzilla: 46931

--------------------------------

commit d24396c5 upstream.

when directory item has an invalid value set for ih_entry_count it might
trigger use-after-free or out-of-bounds read in bin_search_in_dir_item()

ih_entry_count * IH_SIZE for directory item should not be larger than
ih_item_len

Link: https://lore.kernel.org/r/20201101140958.3650143-1-rkovhaev@gmail.com
Reported-and-tested-by: syzbot+83b6f7cf9922cae5c4d7@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=83b6f7cf9922cae5c4d7Signed-off-by: NRustam Kovhaev <rkovhaev@gmail.com>
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.5
commit 397971e1d891f3af98f96da608ca03ac8cf75e94
bugzilla: 46931

--------------------------------

commit 39aead83 upstream.

So ever since syzbot discovered fbcon, we have solid proof that it's
full of bugs. And often the solution is to just delete code and remove
features, e.g.  50145474 ("fbcon: remove soft scrollback code").

Now the problem is that most modern-ish drivers really only treat
fbcon as an dumb kernel console until userspace takes over, and Oops
printer for some emergencies. Looking at drm drivers and the basic
vesa/efi fbdev drivers shows that only 3 drivers support any kind of
acceleration:

- nouveau, seems to be enabled by default
- omapdrm, when a DMM remapper exists using remapper rewriting for
  y/xpanning
- gma500, but that is getting deleted now for the GTT remapper trick,
  and the accelerated copyarea never set the FBINFO_HWACCEL_COPYAREA
  flag, so unused (and could be deleted already I think).

No other driver supportes accelerated fbcon. And fbcon is the only
user of this accel code (it's not exposed as uapi through ioctls),
which means we could garbage collect fairly enormous amounts of code
if we kill this.

Plus because syzbot only runs on virtual hardware, and none of the
drivers for that have acceleration, we'd remove a huge gap in testing.
And there's no other even remotely comprehensive testing aside from
syzbot.

This patch here just disables the acceleration code by always
redrawing when scrolling. The plan is that once this has been merged
for well over a year in released kernels, we can start to go around
and delete a lot of code.

v2:
- Drop a few more unused local variables, somehow I missed the
compiler warnings (Sam)
- Fix typo in comment (Jiri)
- add a todo entry for the cleanup (Thomas)

v3: Remove more unused variables (0day)
Reviewed-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: NThomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Peilin Ye <yepeilin.cs@gmail.com>
Cc: George Kennedy <george.kennedy@oracle.com>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Peter Rosin <peda@axentia.se>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201029132229.4068359-1-daniel.vetter@ffwll.chSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.5
commit df83b9b674495f4dad6cf9d857095d0432b901e7
bugzilla: 46931

--------------------------------

commit 70f259a3 upstream.

When h5_close() gets called, the memory allocated for the hu gets
freed only if hu->serdev doesn't exist. This leads to a memory leak.
So when h5_close() is requested, close the serdev device instance and
free the memory allocated to the hu entirely instead.

Fixes: https://syzkaller.appspot.com/bug?extid=6ce141c55b2f7aafd1c4
Reported-by: syzbot+6ce141c55b2f7aafd1c4@syzkaller.appspotmail.com
Tested-by: syzbot+6ce141c55b2f7aafd1c4@syzkaller.appspotmail.com
Signed-off-by: NAnant Thazhemadam <anant.thazhemadam@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.5
commit 9d4053cfb3f34038995e94227da4d48941c2ddac
bugzilla: 46931

--------------------------------

commit cb525319 upstream.

SCSI_CXGB4_ISCSI selects CHELSIO_T4. The latter depends on TLS || TLS=n, so
since 'select' does not check dependencies of the selected symbol,
SCSI_CXGB4_ISCSI should also depend on TLS || TLS=n.

This prevents the following kconfig warning and restricts SCSI_CXGB4_ISCSI
to 'm' whenever TLS=m.

WARNING: unmet direct dependencies detected for CHELSIO_T4
  Depends on [m]: NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_CHELSIO [=y] && PCI [=y] && (IPV6 [=y] || IPV6 [=y]=n) && (TLS [=m] || TLS [=m]=n)
  Selected by [y]:
  - SCSI_CXGB4_ISCSI [=y] && SCSI_LOWLEVEL [=y] && SCSI [=y] && PCI [=y] && INET [=y] && (IPV6 [=y] || IPV6 [=y]=n) && ETHERNET [=y]

Link: https://lore.kernel.org/r/20201208220505.24488-1-rdunlap@infradead.org
Fixes: 7b36b6e0 ("[SCSI] cxgb4i v5: iscsi driver")
Cc: Karen Xie <kxie@chelsio.com>
Cc: linux-scsi@vger.kernel.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.5
commit fdac87be009f1d9352b83fa3f001d9a0ab51e39a
bugzilla: 46931

--------------------------------

commit 605cc30d upstream.

In commit 11fb479f ("zlib: export S390 symbols for zlib modules"), I
added EXPORT_SYMBOL()s to dfltcc_inflate.c but then Mikhail said that
these should probably be in dfltcc_syms.c with the other
EXPORT_SYMBOL()s.

However, that is contrary to the current kernel style, which places
EXPORT_SYMBOL() immediately after the function that it applies to, so
move all EXPORT_SYMBOL()s to their respective function locations and
drop the dfltcc_syms.c file.  Also move MODULE_LICENSE() from the
deleted file to dfltcc.c.

[rdunlap@infradead.org: remove dfltcc_syms.o from Makefile]
  Link: https://lkml.kernel.org/r/20201227171837.15492-1-rdunlap@infradead.org

Link: https://lkml.kernel.org/r/20201219052530.28461-1-rdunlap@infradead.org
Fixes: 11fb479f ("zlib: export S390 symbols for zlib modules")
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Cc: Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Cc: Zaslonko Mikhail <zaslonko@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.5
commit bf81221a40fa6bdd99c7b5ccfe1fabc0c9fc96aa
bugzilla: 46931

--------------------------------

commit 2d18e54d upstream.

A memory leak is found in cgroup1_parse_param() when multiple source
parameters overwrite fc->source in the fs_context struct without free.

unreferenced object 0xffff888100d930e0 (size 16):
  comm "mount", pid 520, jiffies 4303326831 (age 152.783s)
  hex dump (first 16 bytes):
    74 65 73 74 6c 65 61 6b 00 00 00 00 00 00 00 00  testleak........
  backtrace:
    [<000000003e5023ec>] kmemdup_nul+0x2d/0xa0
    [<00000000377dbdaa>] vfs_parse_fs_string+0xc0/0x150
    [<00000000cb2b4882>] generic_parse_monolithic+0x15a/0x1d0
    [<000000000f750198>] path_mount+0xee1/0x1820
    [<0000000004756de2>] do_mount+0xea/0x100
    [<0000000094cafb0a>] __x64_sys_mount+0x14b/0x1f0

Fix this bug by permitting a single source parameter and rejecting with
an error all subsequent ones.

Fixes: 8d2451f4 ("cgroup1: switch to option-by-option parsing")
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NQinglang Miao <miaoqinglang@huawei.com>
Reviewed-by: NZefan Li <lizefan@huawei.com>
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.5
commit 9154d2eeb4f5b3bdac1a07287d7adc94389ab67e
bugzilla: 46931

--------------------------------

commit 7ddcdea5 upstream.

To pick up the changes in:

  a85cbe61 ("uapi: move constants from <linux/kernel.h> to <linux/const.h>")

That causes no changes in tooling, just addresses this perf build
warning:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/const.h' differs from latest version at 'include/uapi/linux/const.h'
  diff -u tools/include/uapi/linux/const.h include/uapi/linux/const.h

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.5
commit e8afbbac2f687e4134b5626168792f3c6d448073
bugzilla: 46931

--------------------------------

commit a85cbe61 upstream.

and include <linux/const.h> in UAPI headers instead of <linux/kernel.h>.

The reason is to avoid indirect <linux/sysinfo.h> include when using
some network headers: <linux/netlink.h> or others -> <linux/kernel.h>
-> <linux/sysinfo.h>.

This indirect include causes on MUSL redefinition of struct sysinfo when
included both <sys/sysinfo.h> and some of UAPI headers:

    In file included from x86_64-buildroot-linux-musl/sysroot/usr/include/linux/kernel.h:5,
                     from x86_64-buildroot-linux-musl/sysroot/usr/include/linux/netlink.h:5,
                     from ../include/tst_netlink.h:14,
                     from tst_crypto.c:13:
    x86_64-buildroot-linux-musl/sysroot/usr/include/linux/sysinfo.h:8:8: error: redefinition of `struct sysinfo'
     struct sysinfo {
            ^~~~~~~
    In file included from ../include/tst_safe_macros.h:15,
                     from ../include/tst_test.h:93,
                     from tst_crypto.c:11:
    x86_64-buildroot-linux-musl/sysroot/usr/include/sys/sysinfo.h:10:8: note: originally defined here

Link: https://lkml.kernel.org/r/20201015190013.8901-1-petr.vorel@gmail.comSigned-off-by: NPetr Vorel <petr.vorel@gmail.com>
Suggested-by: NRich Felker <dalias@aerifal.cx>
Acked-by: NRich Felker <dalias@libc.org>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Florian Weimer <fweimer@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.5
commit ce00a7d0d9523192d0a9dd954f9993358f19a536
bugzilla: 46931

--------------------------------

commit 1ffc5422 upstream.

io_sqe_files_unregister() uninterruptibly waits for enqueued ref nodes,
however requests keeping them may never complete, e.g. because of some
userspace dependency. Make sure it's interruptible otherwise it would
hang forever.

Cc: stable@vger.kernel.org # 5.6+
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.5
commit b25b86936a8dccd6f6ec9045bede4774b6c7c7cf
bugzilla: 46931

--------------------------------

commit 1642b445 upstream.

Setting a new reference node to a file data is not trivial, don't repeat
it, add and use a helper.

Cc: stable@vger.kernel.org # 5.6+
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.5
commit 25a2de679b5d55ead2f99881c7d3e9b745325f39
bugzilla: 46931

--------------------------------

commit ac0648a5 upstream.

io_file_data_ref_zero() can be invoked from soft-irq from the RCU core,
hence we need to ensure that the file_data lock is bottom half safe. Use
the _bh() variants when grabbing this lock.

Reported-by: syzbot+1f4ba1e5520762c523c6@syzkaller.appspotmail.com
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.5
commit 7247bc60e8e1458d89ea53179fce02d2307aac7f
bugzilla: 46931

--------------------------------

commit 77788775 upstream.

If we COW the identity, we assume that ->mm never changes. But this
isn't true of multiple processes end up sharing the ring. Hence treat
id->mm like like any other process compontent when it comes to the
identity mapping. This is pretty trivial, just moving the existing grab
into io_grab_identity(), and including a check for the match.

Cc: stable@vger.kernel.org # 5.10
Fixes: 1e6fa521 ("io_uring: COW io_identity on mismatch")
Reported-by: Christian Brauner <christian.brauner@ubuntu.com>:
Tested-by: Christian Brauner <christian.brauner@ubuntu.com>:
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.5
commit a5184f3cc284e51043981b5d7789468be49e6a0b
bugzilla: 46931

--------------------------------

commit f0bb29e8 upstream.

Decompressing zlib streams on s390 fails with "incorrect data check"
error.

Userspace zlib checks inflate_state.flags in order to byteswap checksums
only for zlib streams, and s390 hardware inflate code, which was ported
from there, tries to match this behavior.  At the same time, kernel zlib
does not use inflate_state.flags, so it contains essentially random
values.  For many use cases either zlib stream is zeroed out or checksum
is not used, so this problem is masked, but at least SquashFS is still
affected.

Fix by always passing a checksum to and from the hardware as is, which
matches zlib_inflate()'s expectations.

Link: https://lkml.kernel.org/r/20201215155551.894884-1-iii@linux.ibm.com
Fixes: 12619610 ("lib/zlib: add s390 hardware support for kernel zlib_inflate")
Signed-off-by: NIlya Leoshkevich <iii@linux.ibm.com>
Tested-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Acked-by: NMikhail Zaslonko <zaslonko@linux.ibm.com>
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Cc: <stable@vger.kernel.org>	[5.6+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.5
commit 98b57685c26d8f41040ecf71e190250fb2eb2a0c
bugzilla: 46931

--------------------------------

commit dc2da7b4 upstream.

VMware observed a performance regression during memmap init on their
platform, and bisected to commit 73a6e474 ("mm: memmap_init:
iterate over memblock regions rather that check each PFN") causing it.

Before the commit:

  [0.033176] Normal zone: 1445888 pages used for memmap
  [0.033176] Normal zone: 89391104 pages, LIFO batch:63
  [0.035851] ACPI: PM-Timer IO Port: 0x448

With commit

  [0.026874] Normal zone: 1445888 pages used for memmap
  [0.026875] Normal zone: 89391104 pages, LIFO batch:63
  [2.028450] ACPI: PM-Timer IO Port: 0x448

The root cause is the current memmap defer init doesn't work as expected.

Before, memmap_init_zone() was used to do memmap init of one whole zone,
to initialize all low zones of one numa node, but defer memmap init of
the last zone in that numa node.  However, since commit 73a6e474,
function memmap_init() is adapted to iterater over memblock regions
inside one zone, then call memmap_init_zone() to do memmap init for each
region.

E.g, on VMware's system, the memory layout is as below, there are two
memory regions in node 2.  The current code will mistakenly initialize the
whole 1st region [mem 0xab00000000-0xfcffffffff], then do memmap defer to
iniatialize only one memmory section on the 2nd region [mem
0x10000000000-0x1033fffffff].  In fact, we only expect to see that there's
only one memory section's memmap initialized.  That's why more time is
costed at the time.

[    0.008842] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[    0.008842] ACPI: SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
[    0.008843] ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x55ffffffff]
[    0.008844] ACPI: SRAT: Node 1 PXM 1 [mem 0x5600000000-0xaaffffffff]
[    0.008844] ACPI: SRAT: Node 2 PXM 2 [mem 0xab00000000-0xfcffffffff]
[    0.008845] ACPI: SRAT: Node 2 PXM 2 [mem 0x10000000000-0x1033fffffff]

Now, let's add a parameter 'zone_end_pfn' to memmap_init_zone() to pass
down the real zone end pfn so that defer_init() can use it to judge
whether defer need be taken in zone wide.

Link: https://lkml.kernel.org/r/20201223080811.16211-1-bhe@redhat.com
Link: https://lkml.kernel.org/r/20201223080811.16211-2-bhe@redhat.com
Fixes: commit 73a6e474 ("mm: memmap_init: iterate over memblock regions rather that check each PFN")
Signed-off-by: NBaoquan He <bhe@redhat.com>
Reported-by: NRahul Gopakumar <gopakumarr@vmware.com>
Reviewed-by: NMike Rapoport <rppt@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.5
commit df73c80338ef397d5fb2fe2631d24e2256bed9bd
bugzilla: 46931

--------------------------------

commit e7dd91c4 upstream.

syzbot reported the deadlock here [1].  The issue is in hugetlb cow
error handling when there are not enough huge pages for the faulting
task which took the original reservation.  It is possible that other
(child) tasks could have consumed pages associated with the reservation.
In this case, we want the task which took the original reservation to
succeed.  So, we unmap any associated pages in children so that they can
be used by the faulting task that owns the reservation.

The unmapping code needs to hold i_mmap_rwsem in write mode.  However,
due to commit c0d0381a ("hugetlbfs: use i_mmap_rwsem for more pmd
sharing synchronization") we are already holding i_mmap_rwsem in read
mode when hugetlb_cow is called.

Technically, i_mmap_rwsem does not need to be held in read mode for COW
mappings as they can not share pmd's.  Modifying the fault code to not
take i_mmap_rwsem in read mode for COW (and other non-sharable) mappings
is too involved for a stable fix.

Instead, we simply drop the hugetlb_fault_mutex and i_mmap_rwsem before
unmapping.  This is OK as it is technically not needed.  They are
reacquired after unmapping as expected by calling code.  Since this is
done in an uncommon error path, the overhead of dropping and reacquiring
mutexes is acceptable.

While making changes, remove redundant BUG_ON after unmap_ref_private.

[1] https://lkml.kernel.org/r/000000000000b73ccc05b5cf8558@google.com

Link: https://lkml.kernel.org/r/4c5781b8-3b00-761e-c0c7-c5edebb6ec1a@oracle.com
Fixes: c0d0381a ("hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization")
Signed-off-by: NMike Kravetz <mike.kravetz@oracle.com>
Reported-by: syzbot+5eee4145df3c15e96625@syzkaller.appspotmail.com
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.5
commit 092898b070e0fa53df6e598a5a5f1ea8f35476f1
bugzilla: 46931

--------------------------------

commit fa4d0f19 upstream.

With the current implementation the following race can happen:

 * blk_pre_runtime_suspend() calls blk_freeze_queue_start() and
   blk_mq_unfreeze_queue().

 * blk_queue_enter() calls blk_queue_pm_only() and that function returns
   true.

 * blk_queue_enter() calls blk_pm_request_resume() and that function does
   not call pm_request_resume() because the queue runtime status is
   RPM_ACTIVE.

 * blk_pre_runtime_suspend() changes the queue status into RPM_SUSPENDING.

Fix this race by changing the queue runtime status into RPM_SUSPENDING
before switching q_usage_counter to atomic mode.

Link: https://lore.kernel.org/r/20201209052951.16136-2-bvanassche@acm.org
Fixes: 986d413b ("blk-mq: Enable support for runtime power management")
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Reviewed-by: NJens Axboe <axboe@kernel.dk>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Acked-by: NStanley Chu <stanley.chu@mediatek.com>
Co-developed-by: NCan Guo <cang@codeaurora.org>
Signed-off-by: NCan Guo <cang@codeaurora.org>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.5
commit 1a58c171a523d2224fe12fb26fc459231f245b0d
bugzilla: 46931

--------------------------------

commit 0e1d9ca1 upstream.

Fix the clock reference counting by calling the missing clk_put() in the
error path.

Cc: v5.10 <stable@vger.kernel.org> # v5.10
Fixes: dd461cd9 ("opp: Allow dev_pm_opp_get_opp_table() to return -EPROBE_DEFER")
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.5
commit e8322837a2e56d6b8d4b87d81292805948991e2c
bugzilla: 46931

--------------------------------

commit 976509bb upstream.

In function _allocate_opp_table, opp_dev is allocated and referenced
by opp_table via _add_opp_dev. But in the case that the subsequent calls
return -EPROBE_DEFER, it will jump to err label and opp_table will be
freed. Then opp_dev becomes an unreferenced object to cause memory leak.
So let's call _remove_opp_dev to do the cleanup.

This fixes the following kmemleak report:

unreferenced object 0xffff000801524a00 (size 128):
  comm "swapper/0", pid 1, jiffies 4294892465 (age 84.616s)
  hex dump (first 32 bytes):
    40 00 56 01 08 00 ff ff 40 00 56 01 08 00 ff ff  @.V.....@.V.....
    b8 52 77 7f 08 00 ff ff 00 3c 4c 00 08 00 ff ff  .Rw......<L.....
  backtrace:
    [<00000000b1289fb1>] kmemleak_alloc+0x30/0x40
    [<0000000056da48f0>] kmem_cache_alloc+0x3d4/0x588
    [<00000000a84b3b0e>] _add_opp_dev+0x2c/0x88
    [<0000000062a380cd>] _add_opp_table_indexed+0x124/0x268
    [<000000008b4c8f1f>] dev_pm_opp_of_add_table+0x20/0x1d8
    [<00000000e5316798>] dev_pm_opp_of_cpumask_add_table+0x48/0xf0
    [<00000000db0a8ec2>] dt_cpufreq_probe+0x20c/0x448
    [<0000000030a3a26c>] platform_probe+0x68/0xd8
    [<00000000c618e78d>] really_probe+0xd0/0x3a0
    [<00000000642e856f>] driver_probe_device+0x58/0xb8
    [<00000000f10f5307>] device_driver_attach+0x74/0x80
    [<0000000004f254b8>] __driver_attach+0x58/0xe0
    [<0000000009d5d19e>] bus_for_each_dev+0x70/0xc8
    [<0000000000d22e1c>] driver_attach+0x24/0x30
    [<0000000001d4e952>] bus_add_driver+0x14c/0x1f0
    [<0000000089928aaa>] driver_register+0x64/0x120

Cc: v5.10 <stable@vger.kernel.org> # v5.10
Fixes: dd461cd9 ("opp: Allow dev_pm_opp_get_opp_table() to return -EPROBE_DEFER")
Signed-off-by: NQuanyang Wang <quanyang.wang@windriver.com>
[ Viresh: Added the stable tag ]
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.5
commit c6dd62c14b3228140c7c92f14b4cfd8625d575ac
bugzilla: 46931

--------------------------------

commit 72188381 upstream.

I mistakenly added the select attributes to the SPI_DW_BT1_DIRMAP config
instead of having them defined in SPI_DW_BT1. If the kernel doesn't have
the MULTIPLEXER and MUX_MMIO configs manually enabled and the
SPI_DW_BT1_DIRMAP config hasn't been selected, Baikal-T1 SPI device will
always fail to be probed by the driver. Fix that and the error reported by
the test robot:

>> ld.lld: error: undefined symbol: devm_mux_control_get
   >>> referenced by spi-dw-bt1.c
   >>> spi/spi-dw-bt1.o:(dw_spi_bt1_sys_init) in archive drivers/built-in.a

by moving the MULTIPLEXER/MUX_MMIO configs selection to the SPI_DW_BT1
config.

Link: https://lore.kernel.org/lkml/202011161745.uYRlekse-lkp@intel.com/
Link: https://lore.kernel.org/linux-spi/20201116040721.8001-1-rdunlap@infradead.org/
Fixes: abf00907 ("spi: dw: Add Baikal-T1 SPI Controller glue driver")
Reported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: NSerge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
Link: https://lore.kernel.org/r/20201127144612.4204-1-Sergey.Semin@baikalelectronics.ruSigned-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.5
commit 6d63cc42bb8f422a96deafdab9409b69cb1a7925
bugzilla: 46931

--------------------------------

[ Upstream commit a61df3c4 ]

syzkaller found the following JFFS2 splat:

  Unable to handle kernel paging request at virtual address dfffa00000000001
  Mem abort info:
    ESR = 0x96000004
    EC = 0x25: DABT (current EL), IL = 32 bits
    SET = 0, FnV = 0
    EA = 0, S1PTW = 0
  Data abort info:
    ISV = 0, ISS = 0x00000004
    CM = 0, WnR = 0
  [dfffa00000000001] address between user and kernel address ranges
  Internal error: Oops: 96000004 [#1] SMP
  Dumping ftrace buffer:
     (ftrace buffer empty)
  Modules linked in:
  CPU: 0 PID: 12745 Comm: syz-executor.5 Tainted: G S                5.9.0-rc8+ #98
  Hardware name: linux,dummy-virt (DT)
  pstate: 20400005 (nzCv daif +PAN -UAO BTYPE=--)
  pc : jffs2_parse_param+0x138/0x308 fs/jffs2/super.c:206
  lr : jffs2_parse_param+0x108/0x308 fs/jffs2/super.c:205
  sp : ffff000022a57910
  x29: ffff000022a57910 x28: 0000000000000000
  x27: ffff000057634008 x26: 000000000000d800
  x25: 000000000000d800 x24: ffff0000271a9000
  x23: ffffa0001adb5dc0 x22: ffff000023fdcf00
  x21: 1fffe0000454af2c x20: ffff000024cc9400
  x19: 0000000000000000 x18: 0000000000000000
  x17: 0000000000000000 x16: ffffa000102dbdd0
  x15: 0000000000000000 x14: ffffa000109e44bc
  x13: ffffa00010a3a26c x12: ffff80000476e0b3
  x11: 1fffe0000476e0b2 x10: ffff80000476e0b2
  x9 : ffffa00010a3ad60 x8 : ffff000023b70593
  x7 : 0000000000000003 x6 : 00000000f1f1f1f1
  x5 : ffff000023fdcf00 x4 : 0000000000000002
  x3 : ffffa00010000000 x2 : 0000000000000001
  x1 : dfffa00000000000 x0 : 0000000000000008
  Call trace:
   jffs2_parse_param+0x138/0x308 fs/jffs2/super.c:206
   vfs_parse_fs_param+0x234/0x4e8 fs/fs_context.c:117
   vfs_parse_fs_string+0xe8/0x148 fs/fs_context.c:161
   generic_parse_monolithic+0x17c/0x208 fs/fs_context.c:201
   parse_monolithic_mount_data+0x7c/0xa8 fs/fs_context.c:649
   do_new_mount fs/namespace.c:2871 [inline]
   path_mount+0x548/0x1da8 fs/namespace.c:3192
   do_mount+0x124/0x138 fs/namespace.c:3205
   __do_sys_mount fs/namespace.c:3413 [inline]
   __se_sys_mount fs/namespace.c:3390 [inline]
   __arm64_sys_mount+0x164/0x238 fs/namespace.c:3390
   __invoke_syscall arch/arm64/kernel/syscall.c:36 [inline]
   invoke_syscall arch/arm64/kernel/syscall.c:48 [inline]
   el0_svc_common.constprop.0+0x15c/0x598 arch/arm64/kernel/syscall.c:149
   do_el0_svc+0x60/0x150 arch/arm64/kernel/syscall.c:195
   el0_svc+0x34/0xb0 arch/arm64/kernel/entry-common.c:226
   el0_sync_handler+0xc8/0x5b4 arch/arm64/kernel/entry-common.c:236
   el0_sync+0x15c/0x180 arch/arm64/kernel/entry.S:663
  Code: d2d40001 f2fbffe1 91002260 d343fc02 (38e16841)
  ---[ end trace 4edf690313deda44 ]---

This is because since ec10a24f, the option parsing happens before
fill_super and so the MTD device isn't associated with the filesystem.
Defer the size check until there is a valid association.

Fixes: ec10a24f ("vfs: Convert jffs2 to use the new mount API")
Cc: <stable@vger.kernel.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: NJamie Iles <jamie@nuviainc.com>
Signed-off-by: NRichard Weinberger <richard@nod.at>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.5
commit 58dc34446c5280b3d069c27c4b0a56a08c1a2da8
bugzilla: 46931

--------------------------------

[ Upstream commit cd3ed3c7 ]

Set rp_size to zero will be ignore during remounting.

The method to identify whether we input a remounting option of
rp_size is to check if the rp_size input is zero. It can not work
well if we pass "rp_size=0".

This patch add a bool variable "set_rp_size" to fix this problem.
Reported-by: NJubin Zhong <zhongjubin@huawei.com>
Signed-off-by: Nlizhe <lizhe67@huawei.com>
Signed-off-by: NRichard Weinberger <richard@nod.at>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.5
commit 52504a61ab999289d406f5dec930d3e3f386365d
bugzilla: 46931

--------------------------------

commit dfea9fce upstream.

The purpose of io_uring_cancel_files() is to wait for all requests
matching ->files to go/be cancelled. We should first drop files of a
request in io_req_drop_files() and only then make it undiscoverable for
io_uring_cancel_files.

First drop, then delete from list. It's ok to leave req->id->files
dangling, because it's not dereferenced by cancellation code, only
compared against. It would potentially go to sleep and be awaken by
following in io_req_drop_files() wake_up().

Fixes: 0f212204 ("io_uring: don't rely on weak ->files references")
Cc: <stable@vger.kernel.org> # 5.5+
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.5
commit 8b8a688260b4ad39832d3fce790f2b53f1f3e535
bugzilla: 46931

--------------------------------

commit 6bdeff12 upstream.

Some old ASICs might not implement/require get_dig_frontend helper; in
this scenario, we can have a NULL pointer exception when we try to call
it inside vbios disable operation. For example, this situation might
happen when using Polaris12 with an eDP panel. This commit avoids this
situation by adding a specific get_dig_frontend implementation for DCEx.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Cc: Chiawen Huang <chiawen.huang@amd.com>
Reported-and-tested-by: NBorislav Petkov <bp@suse.de>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.5
commit 5ef98378eff84b8f9d4e33de98011e2f7aa642eb
bugzilla: 46931

--------------------------------

commit 93decc56 upstream.

In __make_request() a new r10bio is allocated and passed to
raid10_read_request(). The read_slot member of the bio is not
initialized, and the raid10_read_request() uses it to index an
array. This leads to occasional panics.

Fix by initializing the field to invalid value and checking for
valid value in raid10_read_request().

Cc: stable@vger.kernel.org
Signed-off-by: NKevin Vigor <kvigor@gmail.com>
Signed-off-by: NSong Liu <songliubraving@fb.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.5
commit 62162b322364f0b07608aae5cfa80868fe25fb06
bugzilla: 46931

--------------------------------

[ Upstream commit efb796f5 ]

Syzbot reported a shift of a u32 by more than 31 in strset_parse_request()
which is undefined behavior. This is caused by range check of string set id
using variable ret (which is always 0 at this point) instead of id (string
set id from request).

Fixes: 71921690 ("ethtool: provide string sets with STRSET_GET request")
Reported-by: syzbot+96523fb438937cd01220@syzkaller.appspotmail.com
Signed-off-by: NMichal Kubecek <mkubecek@suse.cz>
Link: https://lore.kernel.org/r/b54ed5c5fd972a59afea3e1badfb36d86df68799.1607952208.git.mkubecek@suse.czSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.5
commit 95fcb69c491e976affb135a40cbd1d19b98bb02f
bugzilla: 46931

--------------------------------

[ Upstream commit ef72cd3c ]

Fix two error paths in ethnl_set_channels() to avoid lock-up caused
but unreleased RTNL.

Fixes: e19c591e ("ethtool: set device channel counts with CHANNELS_SET request")
Reported-by: NLiLiang <liali@redhat.com>
Signed-off-by: NIvan Vecera <ivecera@redhat.com>
Reviewed-by: NMichal Kubecek <mkubecek@suse.cz>
Link: https://lore.kernel.org/r/20201215090810.801777-1-ivecera@redhat.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.5
commit aeab3d7a04f8127fa81e3e763914122ad260c930
bugzilla: 46931

--------------------------------

[ Upstream commit 0c148460 ]

Currently MPTCP is not propagating the security context
from the ingress request socket to newly created msk
at clone time.

Address the issue invoking the missing security helper.

Fixes: cf7da0d6 ("mptcp: Create SUBFLOW socket for incoming connections")
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Reviewed-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

stable inclusion
from stable-5.10.5
commit a969a632cbe7165d448a5528806ad120c2599397
bugzilla: 46931

--------------------------------

[ Upstream commit 44d4775c ]

syzkaller shows that packets can still be dequeued while taprio_destroy()
is running. Let sch_taprio use the reset() function to cancel the advance
timer and drop all skbs from the child qdiscs.

Fixes: 5a781ccb ("tc: Add support for configuring the taprio scheduler")
Link: https://syzkaller.appspot.com/bug?id=f362872379bf8f0017fb667c1ab158f2d1e764ae
Reported-by: syzbot+8971da381fb5a31f542d@syzkaller.appspotmail.com
Signed-off-by: NDavide Caratti <dcaratti@redhat.com>
Acked-by: NVinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://lore.kernel.org/r/63b6d79b0e830ebb0283e020db4df3cdfdfb2b94.1608142843.git.dcaratti@redhat.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>

virt inclusion
category: feature
bugzilla: 46853
CVE: NA

Export vcpu_stat via debugfs for x86, which contains x86 kvm exits items.
The path of the vcpu_stat is /sys/kernel/debug/kvm/vcpu_stat, and
each line of vcpu_stat is a collection of various kvm exits for a vcpu.
And through vcpu_stat, we only need to open one file to
tail performance of virtual machine, which is more convenient.
Signed-off-by: NFeng Lin <linfeng23@huawei.com>
Signed-off-by: Nchenjiajun <chenjiajun8@huawei.com>
Reviewed-by: NXiangyou Xie <xiexiangyou@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>

virt inclusion
category: feature
bugzilla: 46853
CVE: NA

This patch export cpu time related items to vcpu_stat.
Contain:
	steal, st_max, utime, stime, gtime

The definitions of these items are:
steal: cpu time VCPU waits for PCPU while it is servicing another VCPU
st_max: max scheduling delay
utime: cpu time in userspace
stime: cpu time in sys
gtime: cpu time in guest

Through these items, user can get many cpu usage info of vcpu, such as:
CPU Usage of Guest =  gtime_delta / delta_cputime
CPU Usage of Hyp = (utime_delta - gtime_delta + stime_delta) / delta_cputime
CPU Usage of Steal = steal_delta / delta_cputime
Max Scheduling Delay = st_max
Signed-off-by: Nliangpeng <liangpeng10@huawei.com>
Signed-off-by: Nchenjiajun <chenjiajun8@huawei.com>
Reviewed-by: NXiangyou Xie <xiexiangyou@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>

virt inclusion
category: feature
bugzilla: 46853
CVE: NA

This patch export remaining aarch64 exit items to vcpu_stat via debugfs.
The items include:
	fp_asimd_exit_stat, irq_exit_stat, sys64_exit_stat,
	mabt_exit_stat, fail_entry_exit_stat, internal_error_exit_stat,
	unknown_ec_exit_stat, cp15_32_exit_stat, cp15_64_exit_stat,
	cp14_mr_exit_stat, cp14_ls_exit_stat, cp14_64_exit_stat,
	smc_exit_stat, sve_exit_stat, debug_exit_stat
Signed-off-by: NBiaoxiang Ye <yebiaoxiang@huawei.com>
Signed-off-by: NZengruan Ye <yezengruan@huawei.com>
Signed-off-by: Nchenjiajun <chenjiajun8@huawei.com>
Reviewed-by: NXiangyou Xie <xiexiangyou@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>

virt inclusion
category: feature
bugzilla: 46853
CVE: NA

This patch create debugfs entry for vcpu stat.
The entry path is /sys/kernel/debug/kvm/vcpu_stat.
And vcpu_stat contains partial kvm exits items of vcpu, include:
	pid, hvc_exit_stat, wfe_exit_stat, wfi_exit_stat,
	mmio_exit_user, mmio_exit_kernel, exits

Currently, The maximum vcpu limit is 1024.

From this vcpu_stat, user can get the number of these kvm exits items
over a period of time, which is helpful to monitor the virtual machine.
Signed-off-by: NZenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Nchenjiajun <chenjiajun8@huawei.com>
Reviewed-by: NXiangyou Xie <xiexiangyou@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>

euleros inclusion
category: feature
feature: initial KVM RISC-V support
bugzilla: 46845
CVE: NA

When mapping the HVA to HPA above, it doesn't know that the PTE
writeable of stage2 is "!memslot_is_readonly(slot)". This may causes
the difference between the writability of HVA->HPA and GPA->HPA.

Reference: https://gitee.com/openeuler/kernel/issues/I26X9VSigned-off-by: NMingwang Li <limingwang@huawei.com>
Reviewed-by: NYifei Jiang <jiangyifei@huawei.com>
Acked-by: NXie XiuQi <xiexiuqi@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>