- 26 4月, 2007 9 次提交
-
-
由 Patrick McHardy 提交于
esp_init_state doesn't account for the beet pseudo header in the header_len calculation, which may result in undersized skbs hitting xfrm4_beet_output, causing unnecessary reallocations in ip_finish_output2. The skbs should still always have enough room to avoid causing skb_under_panic in skb_push since we have at least 16 bytes available from LL_RESERVED_SPACE in xfrm_state_check_space. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Replace the probing based MTU estimation, which usually takes 2-3 iterations to find a fitting value and may underestimate the MTU, by an exact calculation. Also fix underestimation of the XFRM trailer_len, which causes unnecessary reallocations. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Fix incorrect switch of "trailer" skb by "skb" during skb_tail_pointer conversion: - *(u8*)(trailer->tail - 1) = top_iph->protocol; + *(skb_tail_pointer(skb) - 1) = top_iph->protocol; - *(u8 *)(trailer->tail - 1) = *skb_network_header(skb); + *(skb_tail_pointer(skb) - 1) = *skb_network_header(skb); Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
So that it is also an offset from skb->head, reduces its size from 8 to 4 bytes on 64bit architectures, allowing us to combine the 4 bytes hole left by the layer headers conversion, reducing struct sk_buff size to 256 bytes, i.e. 4 64byte cachelines, and since the sk_buff slab cache is SLAB_HWCACHE_ALIGN... :-) Many calculations that previously required that skb->{transport,network, mac}_header be first converted to a pointer now can be done directly, being meaningful as offsets or pointers. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
For the cases where the transport header is being set to a offset from skb->data. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
For the quite common 'skb->h.raw - skb->data' sequence. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
For the places where we need a pointer to the network header, it is still legal to touch skb->nh.raw directly if just adding to, subtracting from or setting it to another layer header. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 2月, 2007 1 次提交
-
-
由 YOSHIFUJI Hideaki 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 12月, 2006 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 10月, 2006 1 次提交
-
-
由 Diego Beltrami 提交于
This patch introduces the BEET mode (Bound End-to-End Tunnel) with as specified by the ietf draft at the following link: http://www.ietf.org/internet-drafts/draft-nikander-esp-beet-mode-06.txt The patch provides only single family support (i.e. inner family = outer family). Signed-off-by: NDiego Beltrami <diego.beltrami@gmail.com> Signed-off-by: NMiika Komu <miika@iki.fi> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NAbhinav Pathak <abhinav.pathak@hiit.fi> Signed-off-by: NJeff Ahrenholz <ahrenholz@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 9月, 2006 2 次提交
-
-
由 David S. Miller 提交于
First of all, if the xfrm_state only gets used for input packets this entropy is a complete waste. Secondly, it is often the case that a configuration loads many rules (perhaps even dynamically) and they don't all necessarily ever get used. This get_random_bytes() call was showing up in the profiles for xfrm_state inserts which is how I noticed this. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Masahide NAKAMURA 提交于
Transformation mode is used as either IPsec transport or tunnel. It is required to add two more items, route optimization and inbound trigger for Mobile IPv6. Based on MIPL2 kernel patch. This patch was also written by: Ville Nuorvala <vnuorval@tcs.hut.fi> Signed-off-by: NMasahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 9月, 2006 2 次提交
-
-
由 Herbert Xu 提交于
This patch converts IPsec to use the new HMAC template. The names of existing simple digest algorithms may still be used to refer to their HMAC composites. The same structure can be used by other MACs such as AES-XCBC-MAC. This patch also switches from the digest interface to hash. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
This patch converts IPSec/ESP to use the new block cipher type where applicable. Similar to the HMAC conversion, existing algorithm names have been kept for compatibility. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 22 7月, 2006 1 次提交
-
-
由 Panagiotis Issaris 提交于
Signed-off-by: NPanagiotis Issaris <takis@issaris.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 7月, 2006 1 次提交
-
-
由 Jörn Engel 提交于
Signed-off-by: NJörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
- 18 6月, 2006 1 次提交
-
-
由 Herbert Xu 提交于
Now that we have xfrm_mode objects we can move the transport mode specific input decapsulation code into xfrm_mode_transport. This removes duplicate code as well as unnecessary header movement in case of tunnel mode SAs since we will discard the original IP header immediately. This also fixes a minor bug for transport-mode ESP where the IP payload length is set to the correct value minus the header length (with extension headers for IPv6). Of course the other neat thing is that we no longer have to allocate temporary buffers to hold the IP headers for ESP and IPComp. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 4月, 2006 1 次提交
-
-
由 Herbert Xu 提交于
This patch removes the decap_state argument from the xfrm input hook. Previously this function allowed the input hook to share state with the post_input hook. The latter has since been removed. The only purpose for it now is to check the encap type. However, it is easier and better to move the encap type check to the generic xfrm_rcv function. This allows us to get rid of the decap state argument altogether. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 3月, 2006 1 次提交
-
-
由 Jamal Hadi Salim 提交于
Fast path sequence updates that will generate ipsec async events Signed-off-by: NJamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 2月, 2006 2 次提交
-
-
由 Herbert Xu 提交于
The only reason post_input exists at all is that it gives us the potential to adjust the checksums incrementally in future which we ought to do. However, after thinking about it for a bit we can adjust the checksums without using this post_input stuff at all. The crucial point is that only the inner-most NAT-T SA needs to be considered when adjusting checksums. What's more, the checksum adjustment comes down to a single u32 due to the linearity of IP checksums. We just happen to have a spare u32 lying around in our skb structure :) When ip_summed is set to CHECKSUM_NONE on input, the value of skb->csum is currently unused. All we have to do is to make that the checksum adjustment and voila, there goes all the post_input and decap structures! I've left in the decap data structures for now since it's intricately woven into the sec_path stuff. We can kill them later too. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
We used to keep sg on the stack which is why the extra block was useful. We've long since stopped doing that so let's kill the block and save some indentation. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 1月, 2006 1 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
To help in reducing the number of include dependencies, several files were touched as they were getting needed headers indirectly for stuff they use. Thanks also to Alan Menegotto for pointing out that net/dccp/proto.c had linux/dccp.h include twice. Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 10月, 2005 2 次提交
-
-
由 Herbert Xu 提交于
This patch fixes the following bugs in ESP: * Fix transport mode MTU overestimate. This means that the inner MTU is smaller than it needs be. Worse yet, given an input MTU which is a multiple of 4 it will always produce an estimate which is not a multiple of 4. For example, given a standard ESP/3DES/MD5 transform and an MTU of 1500, the resulting MTU for transport mode is 1462 when it should be 1464. The reason for this is because IP header lengths are always a multiple of 4 for IPv4 and 8 for IPv6. * Ensure that the block size is at least 4. This is required by RFC2406 and corresponds to what the esp_output function does. At the moment this only affects crypto_null as its block size is 1. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
This patch uses the macro ALIGN in all the applicable spots for ESP. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 9月, 2005 1 次提交
-
-
由 Jesper Juhl 提交于
Since the patch to add a NULL short-circuit to crypto_free_tfm() went in, there's no longer any need for callers of that function to check for NULL. This patch removes the redundant NULL checks and also a few similar checks for NULL before calls to kfree() that I ran into while doing the crypto_free_tfm bits. I've succesfuly compile tested this patch, and a kernel with the patch applied boots and runs just fine. When I posted the patch to LKML (and other lists/people on Cc) it drew the following comments : J. Bruce Fields commented "I've no problem with the auth_gss or nfsv4 bits.--b." Sridhar Samudrala said "sctp change looks fine." Herbert Xu signed off on the patch. So, I guess this is ready to be dropped into -mm and eventually mainline. Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 8月, 2005 1 次提交
-
-
由 Patrick McHardy 提交于
Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 6月, 2005 1 次提交
-
-
由 Herbert Xu 提交于
This patch adds xfrm_init_state which is simply a wrapper that calls xfrm_get_type and subsequently x->type->init_state. It also gets rid of the unused args argument. Abstracting it out allows us to add common initialisation code, e.g., to set family-specific flags. The add_time setting in xfrm_user.c was deleted because it's already set by xfrm_state_alloc. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Acked-by: NJames Morris <jmorris@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 6月, 2005 1 次提交
-
-
由 Edgar E Iglesias 提交于
Signed-off-by: NEdgar E Iglesias <edgar@axis.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-