Delete any instances of include module.h that were not strictly
required.  In the case of ext2, the declaration of MODULE_LICENSE
etc. were in inode.c but the module_init/exit were in super.c, so
relocate the MODULE_LICENCE/AUTHOR block to super.c which makes it
consistent with ext3 and ext4 at the same time.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NJan Kara <jack@suse.cz>

If a file is fallocated on a hole, map->m_lblk + map->m_len may be greater
than ee_block + ee_len.
Signed-off-by: NYongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org

Commit 1939dd84 ("ext4: cleanup ext4_ext_grow_indepth code") added a
reference to ext4_extent_header.eh_depth, but forget to pass the value
read through le16_to_cpu.  The result is a crash on big-endian
machines, such as this crash on a POWER7 server:

attempt to access beyond end of device
sda8: rw=0, want=776392648163376, limit=168558560
Unable to handle kernel paging request for data at address 0x6b6b6b6b6b6b6bcb
Faulting instruction address: 0xc0000000001f5f38
cpu 0x14: Vector: 300 (Data Access) at [c000001bd1aaecf0]
    pc: c0000000001f5f38: .__brelse+0x18/0x60
    lr: c0000000002e07a4: .ext4_ext_drop_refs+0x44/0x80
    sp: c000001bd1aaef70
   msr: 9000000000009032
   dar: 6b6b6b6b6b6b6bcb
 dsisr: 40000000
  current = 0xc000001bd15b8010
  paca    = 0xc00000000ffe4600
    pid   = 19911, comm = flush-8:0
enter ? for help
[c000001bd1aaeff0] c0000000002e07a4 .ext4_ext_drop_refs+0x44/0x80
[c000001bd1aaf090] c0000000002e0c58 .ext4_ext_find_extent+0x408/0x4c0
[c000001bd1aaf180] c0000000002e145c .ext4_ext_insert_extent+0x2bc/0x14c0
[c000001bd1aaf2c0] c0000000002e3fb8 .ext4_ext_map_blocks+0x628/0x1710
[c000001bd1aaf420] c0000000002b2974 .ext4_map_blocks+0x224/0x310
[c000001bd1aaf4d0] c0000000002b7f2c .mpage_da_map_and_submit+0xbc/0x490
[c000001bd1aaf5a0] c0000000002b8688 .write_cache_pages_da+0x2c8/0x430
[c000001bd1aaf720] c0000000002b8b28 .ext4_da_writepages+0x338/0x670
[c000001bd1aaf8d0] c000000000157280 .do_writepages+0x40/0x90
[c000001bd1aaf940] c0000000001ea830 .writeback_single_inode+0xe0/0x530
[c000001bd1aafa00] c0000000001eb680 .writeback_sb_inodes+0x210/0x300
[c000001bd1aafb20] c0000000001ebc84 .__writeback_inodes_wb+0xd4/0x140
[c000001bd1aafbe0] c0000000001ebfec .wb_writeback+0x2fc/0x3e0
[c000001bd1aafce0] c0000000001ed770 .wb_do_writeback+0x2f0/0x300
[c000001bd1aafdf0] c0000000001ed848 .bdi_writeback_thread+0xc8/0x340
[c000001bd1aafed0] c0000000000c5494 .kthread+0xb4/0xc0
[c000001bd1aaff90] c000000000021f48 .kernel_thread+0x54/0x70

This is due to getting ext_depth(inode) == 0x101 and therefore running
off the end of the path array in ext4_ext_drop_refs into following
unallocated structures.

This fixes it by adding the necessary le16_to_cpu.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

The variable 'block' is removed by commit 750c9c47, so use the
replacement ex_ee_block instead.
Signed-off-by: NYongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

This patch fixes a syntax error which omits a comma. Besides this,
logical block number is unsigend 32 bits, so printk should use %u
instead %d.
Signed-off-by: NYongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

If an fallocate request fits in EXT_UNINIT_MAX_LEN, then set the
EXT4_GET_BLOCKS_NO_NORMALIZE flag. For larger fallocate requests,
let mballoc.c normalize the request.

This fixes a problem where large requests were being split into
non-contiguous extents due to commit 556b27ab: ext4: do not
normalize block requests from fallocate.

Testing: 
*) Checked that 8.x MB falloc'ed files are still laid down next to
each other (contiguously).
*) Checked that the maximum size extent (127.9MB) is allocated as 1
extent.
*) Checked that a 1GB file is somewhat contiguous (often 5-6
non-contiguous extents now).
*) Checked that a 120MB file can still be falloc'ed even if there are
no single extents large enough to hold it.
Signed-off-by: NGreg Harm <gharm@google.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

EXT4_IO_END_UNWRITTEN flag set and the increase of i_aiodio_unwritten
should be done simultaneously since ext4_end_io_nolock always clear
the flag and decrease the counter in the same time.

We have found some bugs that the flag is set while leaving
i_aiodio_unwritten unchanged(commit 32c80b32). So this patch just tries
to create a helper function to wrap them to avoid any future bug.
The idea is inspired by Eric.

Cc: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: NTao Ma <boyu.mt@taobao.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

When ext4_ext_map_blocks() is called by punch_hole, trace should
trace blocks punched out.
Signed-off-by: NYongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Signed-off-by: NYongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Signed-off-by: NYongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

ext4_ext_insert_extent() (respectively ext4_ext_insert_index())
was using EXT_MAX_EXTENT() (resp. EXT_MAX_INDEX()) to determine
how many entries needed to be moved beyond the insertion point.
In practice this means that (320 - I) * 24 bytes were memmove()'d
when I is the insertion point, rather than (#entries - I) * 24 bytes.

This patch uses EXT_LAST_EXTENT() (resp. EXT_LAST_INDEX()) instead
to only move existing entries. The code flow is also simplified
slightly to highlight similarities and reduce code duplication in
the insertion logic.

This patch reduces system CPU consumption by over 25% on a 4kB
synchronous append DIO write workload when used with the
pre-2.6.39 x86_64 memmove() implementation. With the much faster
2.6.39 memmove() implementation we still see a decrease in
system CPU usage between 2% and 7%.

Note that the ext_debug() output changes with this patch, splitting
some log information between entries. Users of the ext_debug() output
should note that the "move %d" units changed from reporting the number
of bytes moved to reporting the number of entries moved.
Signed-off-by: NEric Gouriou <egouriou@google.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

This patch introduces a fast path in ext4_ext_convert_to_initialized()
for the case when the conversion can be performed by transferring
the newly initialized blocks from the uninitialized extent into
an adjacent initialized extent. Doing so removes the expensive
invocations of memmove() which occur during extent insertion and
the subsequent merge.

In practice this should be the common case for clients performing
append writes into files pre-allocated via
fallocate(FALLOC_FL_KEEP_SIZE). In such a workload performed via
direct IO and when using a suboptimal implementation of memmove()
(x86_64 prior to the 2.6.39 rewrite), this patch reduces kernel CPU
consumption by 32%.

Two new trace points are added to ext4_ext_convert_to_initialized()
to offer visibility into its operations. No exit trace point has
been added due to the multiplicity of return points. This can be
revisited once the upstream cleanup is backported.
Signed-off-by: NEric Gouriou <egouriou@google.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

When we want to convert the unitialized extent in direct write, we can
either do it in ext4_end_io_nolock(AIO case) or in
ext4_ext_direct_IO(non AIO case) and EXT4_I(inode)->cur_aio_dio is a
guard for ext4_ext_map_blocks to find the right case.  In e9e3bcec,
we mistakenly change it by:

-			if (io)
+			if (io && !(io->flag & EXT4_IO_END_UNWRITTEN)) {
 				io->flag = EXT4_IO_END_UNWRITTEN;
-			else
+				atomic_inc(&EXT4_I(inode)->i_aiodio_unwritten);
+			} else
 				ext4_set_inode_state(inode,
 						     EXT4_STATE_DIO_UNWRITTEN);

So now if we map 2 blocks, and the first one set the
EXT_IO_END_UNWRITTEN, the 2nd mapping will set inode state because of
the check for the flag. This is wrong.

Cc: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: NTao Ma <boyu.mt@taobao.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

In ext4_ext_next_allocated_block(), the path[depth] might
have a p_ext that is NULL -- see ext4_ext_binsearch().  In
such a case, dereferencing it will crash the machine.

This patch checks for p_ext == NULL in
ext4_ext_next_allocated_block() before dereferencinging it.

Tested using a hand-crafted an inode with eh_entries == 0 in
an extent block, verified that running FIEMAP on it crashes
without this patch, works fine with it.
Signed-off-by: NCurt Wohlgemuth <curtw@google.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

When allocated is unsigned it breaks the error handling at the end
of the function when we call:
	allocated = ext4_split_extent(...);
	if (allocated < 0)
		err = allocated;

I've made it a signed int instead of unsigned.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

EOFBLOCK_FL should be updated if called w/o FALLOCATE_FL_KEEP_SIZE
Currently it happens only if new extent was allocated.

TESTCASE:
fallocate test_file -n -l4096
fallocate test_file -l4096
Last fallocate cmd has updated size, but keept EOFBLOCK_FL set. And
fsck will complain about that.

Also remove ping pong in ext4_fallocate() in case of new extents,
where ext4_ext_map_blocks() clear EOFBLOCKS bit, and later
ext4_falloc_update_inode() restore it again.
Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

- Both callers(truncate and punch_hole) already aligned left end point
  so we no longer need split logic here.
- Remove dead duplicated code.
- Call ext4_ext_dirty only after we have updated eh_entries, otherwise
  we'll loose entries update. Regression caused by d583fb87
  266'th testcase in xfstests (http://patchwork.ozlabs.org/patch/120872)
Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Currently code make an impression what grow procedure is very complicated
and some mythical paths, blocks are involved. But in fact grow in depth
it relatively simple procedure:
 1) Just create new meta block and copy root data to that block.
 2) Convert root from extent to index if old depth == 0
 3) Update root block pointer

This patch does:
 - Reorganize code to make it more self explanatory
 - Do not pass path parameter to new_meta_block() in order to
   provoke allocation from inode's group because top-level block
   should site closer to it's inode, but not to leaf data block.

   [ This happens anyway, due to logic in mballoc; we should drop
     the path parameter from new_meta_block() entirely.  -- tytso ]
Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

The third parameter to ext4_free_blocks is a struct buffer_head *.  This
parameter should be NULL not 0.

This quiets the sparse noise:

warning: Using plain integer as NULL pointer
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Add a sanity check to make sure ix hasn't gone beyond the valid bounds
of the extent block.
Signed-off-by: NTao Ma <boyu.mt@taobao.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

ext4_extent_idx.e_block is __le32, so use le32_to_cpu() in
ext4_ext_search_left().
Signed-off-by: NTao Ma <boyu.mt@taobao.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

The comment describing what ext4_ext_search_right() does is incorrect.
We return 0 in *phys when *logical is the 'largest' allocated block,
not smallest.  

Fix a few other typos while we're at it.

Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: NTao Ma <boyu.mt@taobao.com>

Currently, there exists a race between delayed allocated writes and
the writeback when bigalloc feature is in use. The race was because we
wanted to determine what blocks in a cluster are under delayed
allocation and we were using buffer_delayed(bh) check for it. But, the
writeback codepath clears this bit without any synchronization which
resulted in a race and an ext4 warning similar to:

EXT4-fs (ram1): ext4_da_update_reserve_space: ino 13, used 1 with only 0
		reserved data blocks

The race existed in two places.
(1) between ext4_find_delalloc_range() and ext4_map_blocks() when called from
    writeback code path.
(2) between ext4_find_delalloc_range() and ext4_da_get_block_prep() (where
    buffer_delayed(bh) is set.

To fix (1), this patch introduces a new buffer_head state bit -
BH_Da_Mapped.  This bit is set under the protection of
EXT4_I(inode)->i_data_sem when we have actually mapped the delayed
allocated blocks during the writeout time. We can now reliably check
for this bit inside ext4_find_delalloc_range() to determine whether
the reservation for the blocks have already been claimed or not.

To fix (2), it was necessary to set buffer_delay(bh) under the
protection of i_data_sem.  So, I extracted the very beginning of
ext4_map_blocks into a new function - ext4_da_map_blocks() - and
performed the required setting of bh_delay bit and the quota
reservation under the protection of i_data_sem.  These two fixes makes
the checking of buffer_delay(bh) and buffer_da_mapped(bh) consistent,
thus removing the race.

Tested: I was able to reproduce the problem by running 'dd' and
'fsync' in parallel. Also, xfstests sometimes used to reproduce this
race. After the fix both my test and xfstests were successful and no
race (warning message) was observed.

Google-Bug-Id: 4997027
Signed-off-by: NAditya Kali <adityakali@google.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

This patch adds some tracepoints in ext4/extents.c and updates a tracepoint in
ext4/inode.c.

Tested: Built and ran the kernel and verified that these tracepoints work.
Also ran xfstests.
Signed-off-by: NAditya Kali <adityakali@google.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
    

With bigalloc changes, the i_blocks value was not correctly set (it was still
set to number of blocks being used, but in case of bigalloc, we want i_blocks
to represent the number of clusters being used). Since the quota subsystem sets
the i_blocks value, this patch fixes the quota accounting and makes sure that
the i_blocks value is set correctly.
Signed-off-by: NAditya Kali <adityakali@google.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

When we are truncating (as opposed unlinking) a file, we need to worry
about partial truncates of a file, especially in the light of sparse
files.  The changes here make sure that arbitrary truncates of sparse
files works correctly.  Yeah, it's messy.

Note that these functions will need to be revisted when the punch
ioctl is integrated --- in fact this commit will probably have merge
conflicts with the punch changes which Allison Henders and the IBM LTC
have been working on.  I will need to fix this up when either patch
hits mainline.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

If we need to allocate a new block in ext4_ext_map_blocks(), the
function needs to see if the cluster has already been allocated.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

While running extended fsx tests to verify the first
two patches, a similar bug was also found in the
truncate operation.

This bug happens because the truncate routine only zeros
the unblock aligned portion of the last page.  This means
that the block aligned portions of the page appearing after
i_size are left unzeroed, and the buffer heads still mapped.

This bug is corrected by using ext4_discard_partial_page_buffers
in the truncate routine to zero the partial page and unmap
the buffer headers.
Signed-off-by: NAllison Henderson <achender@linux.vnet.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Add debugging information in case jbd2_journal_dirty_metadata() is
called with a buffer_head which didn't have
jbd2_journal_get_write_access() called on it, or if the journal_head
has the wrong transaction in it.  In addition, return an error code.
This won't change anything for ocfs2, which will BUG_ON() the non-zero
exit code.

For ext4, the caller of this function is ext4_handle_dirty_metadata(),
and on seeing a non-zero return code, will call __ext4_journal_stop(),
which will print the function and line number of the (buggy) calling
function and abort the journal.  This will allow us to recover instead
of bug halting, which is better from a robustness and reliability
point of view.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

This patch fixes a second punch hole bug found by xfstests 127.

This bug happens because punch hole needs to flush the pages
of the hole to avoid race conditions.  But if the end of the
hole is in the same page as i_size, the buffer heads beyond
i_size need to be unmapped and the page needs to be zeroed
after it is flushed.

To correct this, the new ext4_discard_partial_page_buffers
routine is used to zero and unmap the partial page
beyond i_size if the end of the hole appears in the same
page as i_size.

The code has also been optimized to set the end of the hole
to the page after i_size if the specified hole exceeds i_size,
and the code that flushes the pages has been simplified.
Signed-off-by: NAllison Henderson <achender@linux.vnet.ibm.com>

This patch addresses a bug found by xfstests 75, 112, 127
when blocksize = 1k

This bug happens because the punch hole code only zeros
out non block aligned regions of the page.  This means that if the
blocks are smaller than a page, then the block aligned regions of
the page inside the hole are left un-zeroed, and their buffer heads
are still mapped.  This bug is corrected by using
ext4_discard_partial_page_buffers to properly zero the partial page
at the head and tail of the hole, and unmap the corresponding buffer
heads

This patch also addresses a bug reported by Lukas while working on a
new patch to add discard support for loop devices using punch hole.
The bug happened because of the first and last block number
needed to be cast to a larger data type before calculating the
byte offset, but since now we only need the byte offsets of the
pages, we no longer even need to be calculating the byte offsets
of the blocks.  The code to do the block offset calculations is
removed in this patch.
Signed-off-by: NAllison Henderson <achender@linux.vnet.ibm.com>

The logical block number in map.l_blk is a __u32, and so before we
shift it left, by the block size, we neeed cast it to a 64-bit size.

Otherwise i_size can be corrupted on an ENOSPC.

# df -T /mnt/mp1
Filesystem    Type   1K-blocks      Used Available Use% Mounted on
/dev/sda6     ext4     9843276    153056   9190200   2% /mnt/mp1
# fallocate -o 0 -l 2199023251456 /mnt/mp1/testfile
fallocate: /mnt/mp1/testfile: fallocate failed: No space left on device
# stat /mnt/mp1/testfile
  File: `/mnt/mp1/testfile'
  Size: 4293656576	Blocks: 19380440   IO Block: 4096   regular file
Device: 806h/2054d	Inode: 12          Links: 1
Access: (0644/-rw-r--r--)  Uid: (    0/    root)   Gid: (    0/    root)
Access: 2011-07-25 13:01:31.414490496 +0900
Modify: 2011-07-25 13:01:31.414490496 +0900
Change: 2011-07-25 13:01:31.454490495 +0900
Signed-off-by: NUtako Kusaka <u-kusaka@wm.jp.nec.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
--
 fs/ext4/extents.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

The old function ext4_ext_rm_idx is used only for truncate case
because it just remove last index in extent-index-block. When punching
hole, it usually needed to remove "middle" index, therefore we must
move indexes which after it forward.

(I create a file with 1 depth extent tree and punch hole in the middle
of it, the last index in index-block strangly gone, so I find out this
bug)
Signed-off-by: NRobin Dong <sanbai@taobao.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

The comment for ext4_ext_check_cache has a litte mistake.
Signed-off-by: NRobin Dong <sanbai@taobao.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

The debug message in ext4_ext_insert_extent before moving extent
is incorrect (the "from xx to xx").
Signed-off-by: NRobin Dong <sanbai@taobao.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

The argument "inode" in function ext4_ext_next_allocated_block looks useless,
so clean it.
Signed-off-by: NRobin Dong <sanbai@taobao.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

If eh_entries is equal to (or greater than) eh_max, the operation of
inserting new extent_idx will make number of entries overflow.
So check eh_entries before inserting the new extent_idx.

Although there is no bug case according the code (function
ext4_ext_insert_index is called by ext4_ext_split and ext4_ext_split
is called only if the index block has free space), the right logic
should be "lookup the capacity before insertion".
Signed-off-by: NRobin Dong <sanbai@taobao.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

This patch avoids an extraneous lookup of the extent cache
in ext4_ext_map_blocks() when the flag
EXT4_GET_BLOCKS_PUNCH_OUT_EXT is absent.

The existing logic was performing the lookup but not making
use of the result. The patch simply reverses the order of evaluation
in the condition.

Since ext4_ext_in_cache() does not initialize newex on misses, bypassing
its invocation does not introduce any new issue in this regard.
Signed-off-by: NRobin Dong <sanbai@taobao.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: NLukas Czerner <lczerner@redhat.com>
Reviewed-by: NEric Gouriou <egouriou@google.com>

This patch removes the extra parameter in ext4_ext_remove_space()
which is no longer needed.
Signed-off-by: NAllison Henderson <achender@linux.vnet.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

This patch optimizes the punch hole operation by skipping the
tree walking code that is used by truncate.  Since punch hole
is done through map blocks, the path to the extent is already
known in this function, so we do not need to look it up again.
Signed-off-by: NAllison Henderson <achender@linux.vnet.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>