Currently the max value of format is calculated by the bits number. It
relies on the continuity of the format.

However, uncore event format is not continuous. E.g. uncore qpi event
format can be 0-7,21.

If bit 21 is set, there is parsing issues as below.

  $ perf stat -a -e uncore_qpi_0/event=0x200002,umask=0x8/
  event syntax error: '..pi_0/event=0x200002,umask=0x8/'
                                    \___ value too big for format, maximum is 511

This patch return the real max value by setting all possible bits to 1.
Signed-off-by: NKan Liang <kan.liang@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1459365375-14285-1-git-send-email-kan.liang@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

For Intel PT / BTS, define the environment variable that selects TSC
timestamps in the jitdump file.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1457426333-30260-1-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Intel PT uses TSC as a timestamp, so add support for using TSC instead
of the monotonic clock.  Use of TSC is selected by an environment
variable "JITDUMP_USE_ARCH_TIMESTAMP" and flagged in the jitdump file
with flag JITDUMP_FLAGS_ARCH_TIMESTAMP.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457426330-30226-1-git-send-email-adrian.hunter@intel.com
[ Added the fixup from He Kuang to make it build on other arches, ]
[ such as aarch64, to avoid inserting this bisectiong breakage upstream ]
Link: http://lkml.kernel.org/r/1459482572-129494-1-git-send-email-hekuang@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Intel PT uses the time members from the perf_event_mmap_page to convert
between TSC and perf time.

Due to a lack of foresight when Intel PT was implemented, those time
members were recorded in the (implementation dependent) AUXTRACE_INFO
event, the structure of which is generally inaccessible outside of the
Intel PT decoder.  However now the conversion between TSC and perf time
is needed when processing a jitdump file when Intel PT has been used for
tracing.

So add a user event to record the time members.  'perf record' will
synthesize the event if the information is available.  And session
processing will put a copy of the event on the session so that tools
like 'perf inject' can easily access it.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1457426324-30158-1-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

  # trace -e getrandom
  35622.560 ( 0.023 ms): systemd-udevd/631 getrandom(buf: 0x55621e3c18f0, count: 16, flags: NONBLOCK) = 16
  35622.585 ( 0.006 ms): systemd-udevd/631 getrandom(buf: 0x55621e3c18f0, count: 16, flags: NONBLOCK) = 16
  35622.594 ( 0.004 ms): systemd-udevd/631 getrandom(buf: 0x55621e3c18f0, count: 16, flags: NONBLOCK) = 16
  35627.395 ( 0.010 ms): libvirtd/1353 getrandom(buf: 0x7f7a1bfa35c0, count: 16, flags: NONBLOCK    ) = 16
  35630.940 ( 0.013 ms): fwupd/16120 getrandom(buf: 0x7f63243aa5c0, count: 16, flags: NONBLOCK      ) = 16
  35718.613 ( 0.015 ms): systemd-udevd/631 getrandom(buf: 0x55621e3c18f0, count: 16, flags: NONBLOCK) = 16
  35718.629 ( 0.005 ms): systemd-udevd/631 getrandom(buf: 0x55621e3c18f0, count: 16, flags: NONBLOCK) = 16
  35718.637 ( 0.004 ms): systemd-udevd/631 getrandom(buf: 0x55621e3c18f0, count: 16, flags: NONBLOCK) = 16
  35719.355 ( 0.010 ms): libvirtd/1353 getrandom(buf: 0x7f7a1bfa35c0, count: 16, flags: NONBLOCK    ) = 16
  35721.042 ( 0.030 ms): fwupd/16120 getrandom(buf: 0x7f63243aa5c0, count: 16, flags: NONBLOCK      ) = 16
  41090.830 ( 0.012 ms): systemd-udevd/631 getrandom(buf: 0x55621e3c18f0, count: 16, flags: NONBLOCK) = 16
  41090.845 ( 0.004 ms): systemd-udevd/631 getrandom(buf: 0x55621e3c18f0, count: 16, flags: NONBLOCK) = 16
  41090.851 ( 0.004 ms): systemd-udevd/631 getrandom(buf: 0x55621e3c18f0, count: 16, flags: NONBLOCK) = 16
  41091.750 ( 0.010 ms): libvirtd/1353 getrandom(buf: 0x7f7a1bfa35c0, count: 16, flags: NONBLOCK    ) = 16
  41091.823 ( 0.006 ms): fwupd/16120 getrandom(buf: 0x7f63243aa5c0, count: 16, flags: NONBLOCK      ) = 16
  41122.078 ( 0.053 ms): systemd-udevd/631 getrandom(buf: 0x55621e3c18f0, count: 16, flags: NONBLOCK) = 16
  41122.129 ( 0.009 ms): systemd-udevd/631 getrandom(buf: 0x55621e3c18f0, count: 16, flags: NONBLOCK) = 16
  41122.139 ( 0.004 ms): systemd-udevd/631 getrandom(buf: 0x55621e3c18f0, count: 16, flags: NONBLOCK) = 16
  41124.492 ( 0.007 ms): libvirtd/1353 getrandom(buf: 0x7f7a1bfa35c0, count: 16, flags: NONBLOCK    ) = 16
  41124.470 ( 0.013 ms): fwupd/16120 getrandom(buf: 0x7f63243aa5c0, count: 16, flags: NONBLOCK      ) = 16
  41590.832 ( 0.014 ms): chrome/5957 getrandom(buf: 0x7fabac7b15b0, count: 16, flags: NONBLOCK      ) = 16
  41590.884 ( 0.004 ms): chrome/5957 getrandom(buf: 0x7fabac7b15c0, count: 16, flags: NONBLOCK      ) = 16

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-gca0n1p3aca3depey703ph2q@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

E.g:

  # trace -e seccomp
   200.061 (0.009 ms): :2441/2441 seccomp(op: FILTER, flags: TSYNC                       ) = -1 EFAULT Bad address
   200.910 (0.121 ms): :2441/2441 seccomp(op: FILTER, flags: TSYNC, uargs: 0x7fff57479fe0) = 0

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-t369uckshlwp4evkks4bcoo7@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We catch this record to provide a visual indication that events are
getting lost, then call the default method to allow extra logging shared
with the other tools to take place.

This extra logging was done twice because we were continuing to the
"default" clause where machine__process_event() will end up calling
machine__process_lost_event() again, fix it.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-wus2zlhw3qo24ye84ewu4aqw@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Convert perf_output_begin() to __perf_output_begin() and make the later
function able to write records from the end of the ring-buffer.

Following commits will utilize the 'backward' flag.

This is the core patch to support writing to the ring-buffer backwards,
which will be introduced by upcoming patches to support reading from
overwritable ring-buffers.

In theory, this patch should not introduce any extra performance
overhead since we use always_inline, but it does not hurt to double
check that assumption:

When CONFIG_OPTIMIZE_INLINING is disabled, the output object is nearly
identical to original one. See:

   http://lkml.kernel.org/g/56F52E83.70409@huawei.com

When CONFIG_OPTIMIZE_INLINING is enabled, the resuling object file becomes
smaller:

 $ size kernel/events/ring_buffer.o*
   text       data        bss        dec        hex    filename
   4641          4          8       4653       122d kernel/events/ring_buffer.o.old
   4545          4          8       4557       11cd kernel/events/ring_buffer.o.new

Performance testing results:

Calling 3000000 times of 'close(-1)', use gettimeofday() to check
duration.  Use 'perf record -o /dev/null -e raw_syscalls:*' to capture
system calls. In ns.

Testing environment:

 CPU    : Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz
 Kernel : v4.5.0

                     MEAN         STDVAR
  BASE            800214.950    2853.083
  PRE            2253846.700    9997.014
  POST           2257495.540    8516.293

Where 'BASE' is pure performance without capturing. 'PRE' is test
result of pure 'v4.5.0' kernel. 'POST' is test result after this
patch.

Considering the stdvar, this patch doesn't hurt performance, within
noise margin.

For testing details, see:

  http://lkml.kernel.org/g/56F89DCD.1040202@huawei.comSigned-off-by: NWang Nan <wangnan0@huawei.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: <pi3orama@163.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1459147292-239310-4-git-send-email-wangnan0@huawei.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Set a default event->overflow_handler in perf_event_alloc() so don't
need to check event->overflow_handler in __perf_event_overflow().
Following commits can give a different default overflow_handler.

Initial idea comes from Peter:

  http://lkml.kernel.org/r/20130708121557.GA17211@twins.programming.kicks-ass.net

Since the default value of event->overflow_handler is not NULL, existing
'if (!overflow_handler)' checks need to be changed.

is_default_overflow_handler() is introduced for this.

No extra performance overhead is introduced into the hot path because in the
original code we still need to read this handler from memory. A conditional
branch is avoided so actually we remove some instructions.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: <pi3orama@163.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1459147292-239310-3-git-send-email-wangnan0@huawei.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Add new ioctl() to pause/resume ring-buffer output.

In some situations we want to read from the ring-buffer only when we
ensure nothing can write to the ring-buffer during reading. Without
this patch we have to turn off all events attached to this ring-buffer
to achieve this.

This patch is a prerequisite to enable overwrite support for the
perf ring-buffer support. Following commits will introduce new methods
support reading from overwrite ring buffer. Before reading, caller
must ensure the ring buffer is frozen, or the reading is unreliable.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: <pi3orama@163.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1459147292-239310-2-git-send-email-wangnan0@huawei.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Currently we check sample type for ftrace:function events
even if it's not created as a sampling event. That prevents
creating ftrace_function event in counting mode.

Make sure we check sample types only for sampling events.

Before:
  $ sudo perf stat -e ftrace:function ls
  ...

   Performance counter stats for 'ls':

     <not supported>      ftrace:function

         0.001983662 seconds time elapsed

After:
  $ sudo perf stat -e ftrace:function ls
  ...

   Performance counter stats for 'ls':

              44,498      ftrace:function

         0.037534722 seconds time elapsed
Suggested-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1458138873-1553-2-git-send-email-jolsa@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

As per AUX buffer management requirement, AUX output has to happen between
pmu::start and pmu::stop calls so that perf_event_stop() actually stops it
and therefore perf can free the AUX data after it has called pmu::stop.

This patch moves perf_aux_output_{begin,end} from bts_event_{add,del} to
bts_event_{start,stop}. As a bonus, we get rid of bts_buffer_is_full(),
which is already taken care of by perf_aux_output_begin() anyway.
Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: vince@deater.net
Link: http://lkml.kernel.org/r/1457098969-21595-6-git-send-email-alexander.shishkin@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

As per AUX buffer management requirement, AUX output has to happen between
pmu::start and pmu::stop calls so that perf_event_stop() actually stops it
and therefore perf can free the AUX data after it has called pmu::stop.

This patch moves perf_aux_output_{begin,end} from pt_event_{add,del} to
pt_event_{start,stop}. As a bonus, we get rid of pt_buffer_is_full(),
which is already taken care of by perf_aux_output_begin() anyway.
Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: vince@deater.net
Link: http://lkml.kernel.org/r/1457098969-21595-5-git-send-email-alexander.shishkin@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

In order to ensure safe AUX buffer management, we rely on the assumption
that pmu::stop() stops its ongoing AUX transaction and not just the hw.

This patch documents this requirement for the perf_aux_output_{begin,end}()
APIs.
Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: vince@deater.net
Link: http://lkml.kernel.org/r/1457098969-21595-4-git-send-email-alexander.shishkin@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Now that we can ensure that when ring buffer's AUX area is on the way
to getting unmapped new transactions won't start, we only need to stop
all events that can potentially be writing aux data to our ring buffer.

Having done that, we can safely free the AUX pages and corresponding
PMU data, as this time it is guaranteed to be the last aux reference
holder.

This partially reverts:

  57ffc5ca ("perf: Fix AUX buffer refcounting")

... which was made to defer deallocation that was otherwise possible
from an NMI context. Now it is no longer the case; the last call to
rb_free_aux() that drops the last AUX reference has to happen in
perf_mmap_close() on that AUX area.
Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: vince@deater.net
Link: http://lkml.kernel.org/r/87d1qtz23d.fsf@ashishki-desk.ger.corp.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

When ring buffer's AUX area is unmapped and rb->aux_mmap_count drops to
zero, new AUX transactions into this buffer can still be started,
even though the buffer in en route to deallocation.

This patch adds a check to perf_aux_output_begin() for rb->aux_mmap_count
being zero, in which case there is no point starting new transactions,
in other words, the ring buffers that pass a certain point in
perf_mmap_close will not have their events sending new data, which
clears path for freeing those buffers' pages right there and then,
provided that no active transactions are holding the AUX reference.
Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: vince@deater.net
Link: http://lkml.kernel.org/r/1457098969-21595-2-git-send-email-alexander.shishkin@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

There should (and can) only be a single PMU for perf_hw_context
events.

This is because of how we schedule events: once a hardware event fails to
schedule (the PMU is 'full') we stop trying to add more. The trivial
'fix' would break the Round-Robin scheduling we do.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Ingo says:

 "If we do a separate file we should have it in arch/x86/events/Kconfig
  (not in arch/x86/Kconfig.perf), and also move some of the other bits,
  such as PERF_EVENTS_AMD_POWER?"
Suggested-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

AMD Zeppelin (Family 17h, Model 00h) introduces an instructions
retired performance counter which is indicated by
CPUID.8000_0008H:EBX[1]. A dedicated Instructions Retired MSR register
(MSR 0xC000_000E9) increments once for every instruction retired.
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Jacob Shin <jacob.w.shin@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <rric@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1454056197-5893-3-git-send-email-ray.huang@amd.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

AMD Carrizo (Family 15h, Model 60h) introduces a time-stamp counter
which is indicated by CPUID.8000_0001H:ECX[27]. It increments at a 100
MHz rate in all P-states, and C states, S0, or S1. The frequency is
about 100MHz. This counter will be used to calculate processor power
and other parts. So add an interface into the MSR PMU to get the PTSC
counter value.
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Jacob Shin <jacob.w.shin@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <rric@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1454056197-5893-2-git-send-email-ray.huang@amd.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Add the exit function and allow the driver to be built as a module.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/20160320185623.658869675@linutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

There is no point in WARN_ON() inside of a well known init function. We
already know the call stack and it's really not of critical importance whether
the registration of a PMU fails.

Aside of that for consistency reasons it's just pointless to try to register
another PMU if the first register attempt failed. There is also no value in
keeping one PMU if the second one can not be registered.

Make it consistent so we can finaly modularize the driver.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/20160320185623.579794064@linutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

The whole probing functionality can simply be expressed with model matching
and a bunch of structures describing the variants. This is a first step to
make that driver modular.

While at it, get rid of completely pointless comments and name the enums so
they are self explaining.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
[ Reworked probing to clear msr[].attr for all !present msrs. ]
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/20160320185623.500381872@linutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

The current implementation aside of being an incomprehensible mess is broken.

  # cat /sys/bus/event_source/devices/cstate_core/cpumask
  0-17

That's on a quad socket machine with 72 physical cores! Qualitee stuff.

So it's not a surprise that event migration in case of CPU hotplug does not
work either.

  # perf stat -e cstate_core/c6-residency/ -C 1 sleep 60 &
  # echo 0 >/sys/devices/system/cpu/cpu1/online

Tracing cstate_pmu_event_update gives me:

 [001] cstate_pmu_event_update <-event_sched_out

After the fix it properly moves the event:

 [001] cstate_pmu_event_update <-event_sched_out
 [073] cstate_pmu_event_update <-__perf_event_read
 [073] cstate_pmu_event_update <-event_sched_out

The migration of pkg events does not work either. Not that I'm surprised.

I really could not be bothered to decode that loop mess and simply replaced it
by querying the proper cpumasks which give us the answer in a comprehensible
way.

This also requires to direct the event to the current active reader CPU in
cstate_pmu_event_init() otherwise the hotplug logic can't work.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
[ Added event->cpu < 0 test to not explode]
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/20160320185623.422519970@linutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

By default, the RAPL driver will be built into the kernel. If it is
configured as a module, the supported CPU model can be auto loaded.

Also clean up the code of rapl_pmu_init().
Based-on-a-patch-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NKan Liang <kan.liang@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1458372050-2420-2-git-send-email-kan.liang@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

By default, the uncore driver will be built into the kernel. If it is
configured as a module, the supported CPU model can be auto loaded.

This patch also cleans up the code of uncore_cpu_init() and
uncore_pci_init().
Based-on-a-patch-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NKan Liang <kan.liang@intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1458462817-2475-1-git-send-email-kan.liang@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Signed-off-by: NIngo Molnar <mingo@kernel.org>

Patch 5a50f529 ("perf/x86/ibs: Fix race with IBS_STARTING state")
closed a big hole while opening another, smaller hole.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes: 5a50f529 ("perf/x86/ibs: Fix race with IBS_STARTING state")
Signed-off-by: NIngo Molnar <mingo@kernel.org>

In the error path, event_file not being NULL is used to determine
whether the event itself still needs to be free'd, so fix it up to
avoid leaking.
Reported-by: NLeon Yu <chianglungyu@gmail.com>
Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes: 13005627 ("perf: Do not double free")
Link: http://lkml.kernel.org/r/87twk06yxp.fsf@ashishki-desk.ger.corp.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Stephane reported that commit:

  3cbaa590 ("perf: Fix ctx time tracking by introducing EVENT_TIME")

introduced a regression wrt. time tracking, as easily observed by:

> This patch introduce a bug in the time tracking of events when
> multiplexing is used.
>
> The issue is easily reproducible with the following perf run:
>
>  $ perf stat -a -C 0 -e branches,branches,branches,branches,branches,branches -I 1000
>      1.000730239            652,394      branches   (66.41%)
>      1.000730239            597,809      branches   (66.41%)
>      1.000730239            593,870      branches   (66.63%)
>      1.000730239            651,440      branches   (67.03%)
>      1.000730239            656,725      branches   (66.96%)
>      1.000730239      <not counted>      branches
>
> One branches event is shown as not having run. Yet, with
> multiplexing, all events should run especially with a 1s (-I 1000)
> interval. The delta for time_running comes out to 0. Yet, the event
> has run because the kernel is actually multiplexing the events. The
> problem is that the time tracking is the kernel and especially in
> ctx_sched_out() is wrong now.
>
> The problem is that in case that the kernel enters ctx_sched_out() with the
> following state:
>    ctx->is_active=0x7 event_type=0x1
>    Call Trace:
>     [<ffffffff813ddd41>] dump_stack+0x63/0x82
>     [<ffffffff81182bdc>] ctx_sched_out+0x2bc/0x2d0
>     [<ffffffff81183896>] perf_mux_hrtimer_handler+0xf6/0x2c0
>     [<ffffffff811837a0>] ? __perf_install_in_context+0x130/0x130
>     [<ffffffff810f5818>] __hrtimer_run_queues+0xf8/0x2f0
>     [<ffffffff810f6097>] hrtimer_interrupt+0xb7/0x1d0
>     [<ffffffff810509a8>] local_apic_timer_interrupt+0x38/0x60
>     [<ffffffff8175ca9d>] smp_apic_timer_interrupt+0x3d/0x50
>     [<ffffffff8175ac7c>] apic_timer_interrupt+0x8c/0xa0
>
> In that case, the test:
>       if (is_active & EVENT_TIME)
>
> will be false and the time will not be updated. Time must always be updated on
> sched out.

Fix this by always updating time if EVENT_TIME was set, as opposed to
only updating time when EVENT_TIME changed.
Reported-by: NStephane Eranian <eranian@google.com>
Tested-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: kan.liang@intel.com
Cc: namhyung@kernel.org
Fixes: 3cbaa590 ("perf: Fix ctx time tracking by introducing EVENT_TIME")
Link: http://lkml.kernel.org/r/20160329072644.GB3408@twins.programming.kicks-ass.netSigned-off-by: NIngo Molnar <mingo@kernel.org>

Merge tag 'perf-core-for-mingo-20160330' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes:

User visible changes:

  - Add support for skipping itrace instructions, useful to fast forward
    processor trace (Intel PT, BTS) to right after initialization code at the start
    of a workload (Andi Kleen)

  - Add support for backtraces in perl 'perf script's (Dima Kogan)

  - Add -U/-K (--all-user/--all-kernel) options to 'perf mem' (Jiri Olsa)

  - Make -f/--force option documentation consistent across tools (Jiri Olsa)

Infrastructure changes:

  - Add 'perf test' to check for event times (Jiri Olsa)

  - 'perf config' cleanups (Taeung Song)
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Merge tag 'perf-urgent-for-mingo-20160330' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

 - Fix determination of a callchain node's childlessness in
   the top/report TUI, which was preventing navigating some
   callchains, --stdio unnaffected (Andres Freund)

 - Fix jitdump's genelf assumption that PowerPC is big endian
   only (Anton Blanchard)
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Commit 9b07e27f ("perf inject: Add jitdump mmap injection support")
incorrectly assumed that PowerPC is big endian only.

Simplify things by consolidating the define of GEN_ELF_ENDIAN and checking
for __BYTE_ORDER == __BIG_ENDIAN.

The PowerPC checks were also incorrect, they do not match what gcc
emits. We should first look for __powerpc64__, then __powerpc__.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Acked-by: NMichael Ellerman <mpe@ellerman.id.au>
Cc: Carl Love <cel@us.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Fixes: 9b07e27f ("perf inject: Add jitdump mmap injection support")
Link: http://lkml.kernel.org/r/20160329175944.33a211cc@krytenSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The 4b3a3212 ("perf hists browser: Support flat callchains") commit
over-aggressively tried to optimize callchain_node__init_have_children().

That lead to --tui mode not allowing to expand call chain elements if a
call chain element had only one parent. That's why --inverted callgraphs
looked halfway sane, but plain ones didn't.

Revert that individual optimization, it wasn't really related to the
rest of the commit.
Signed-off-by: NAndres Freund <andres@anarazel.de>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: 4b3a3212 ("perf hists browser: Support flat callchains")
Link: http://lkml.kernel.org/r/20160330190245.GB13305@awork2.anarazel.deSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When using 'perf script' to look at PT traces it is often useful to
ignore the initialization code at the beginning.

On larger traces which may have many millions of instructions in
initialization code doing that in a pipeline can be very slow, with perf
script spending a lot of CPU time calling printf and writing data.

This patch adds an extension to the --itrace argument that skips 'n'
events (instructions, branches or transactions) at the beginning. This
is much more efficient.

v2:
Add support for BTS (Adrian Hunter)
Document in itrace.txt
Fix branch check
Check transactions and instructions too

Committer note:

To test intel_pt one needs to make sure VT-x isn't active, i.e.
stopping KVM guests on the test machine, as described by Andi Kleen
at http://lkml.kernel.org/r/20160301234953.GD23621@tassilo.jf.intel.comSigned-off-by: NAndi Kleen <ak@linux.intel.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1459187142-20035-1-git-send-email-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We have some infrastructure to use perl or python to analyze logs
generated by perf.  Prior to this patch, only the python tools had
access to backtrace information.  This patch makes this information
available to perl scripts as well.  Example:

  Let's look at malloc() calls made by the seq utility.  First we
  create a probe point:

      $ perf probe -x /lib/x86_64-linux-gnu/libc.so.6 malloc
      Added new events:
      ...

  Now we run seq, while monitoring malloc() calls with perf

      $ perf record --call-graph=dwarf -e probe_libc:malloc seq 5
      1
      2
      3
      4
      5
      [ perf record: Woken up 1 times to write data ]
      [ perf record: Captured and wrote 0.064 MB perf.data (6 samples) ]

  We can use perf to look at its log to see the malloc calls and the backtrace

      $ perf script
      seq 14195 [000] 1927993.748254: probe_libc:malloc: (7f9ff8edd320) bytes=0x22
                  7f9ff8edd320 malloc (/lib/x86_64-linux-gnu/libc-2.22.so)
                  7f9ff8e8eab0 set_binding_values.part.0 (/lib/x86_64-linux-gnu/libc-2.22.so)
                  7f9ff8e8eda1 __bindtextdomain (/lib/x86_64-linux-gnu/libc-2.22.so)
                        401b22 main (/usr/bin/seq)
                  7f9ff8e82610 __libc_start_main (/lib/x86_64-linux-gnu/libc-2.22.so)
                        402799 _start (/usr/bin/seq)
      ...

  We can also use the scripting facilities.  We create a skeleton perl
  script that simply prints out the events

      $ perf script -g perl
      generated Perl script: perf-script.pl

  We can then use this script to see the malloc() calls with a
  backtrace.  Prior to this patch, the backtrace was not available to
  the perl scripts.

      $ perf script -s perf-script.pl
      probe_libc::malloc  0 1927993.748254260  14195 seq   __probe_ip=140325052863264, bytes=34
              [7f9ff8edd320] malloc
              [7f9ff8e8eab0] set_binding_values.part.0
              [7f9ff8e8eda1] __bindtextdomain
              [401b22] main
              [7f9ff8e82610] __libc_start_main
              [402799] _start
      ...
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/r/87mvphzld0.fsf@secretsauce.netSigned-off-by: NDima Kogan <dima@secretsauce.net>

Change the variable name 'v' to 'home' to make it more readable.
Signed-off-by: NTaeung Song <treeze.taeung@gmail.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1459099340-16911-3-git-send-email-treeze.taeung@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

To avoid repeated calling perf_config() remove
buildid_dir_command_config() and add new perf_buildid_config into
perf_default_config.

Because perf_config() is already called with perf_default_config at
main().
Signed-off-by: NTaeung Song <treeze.taeung@gmail.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1459099340-16911-2-git-send-email-treeze.taeung@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Signed-off-by: NTaeung Song <treeze.taeung@gmail.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1459099340-16911-1-git-send-email-treeze.taeung@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This test creates software event 'cpu-clock' attaches it in several ways
and checks that enabled and running times match.

Committer notes:

Testing it:

  [acme@jouet linux]$ perf test -v times
  44: Test events times                                        :
  --- start ---
  test child forked, pid 27170
  attaching to spawned child, enable on exec
    OK    : ena 307328, run 307328
  attaching to current thread as enabled
    OK    : ena 7826, run 7826
  attaching to current thread as disabled
    OK    : ena 738, run 738
  attaching to CPU 0 as enabled
    SKIP  : not enough rights
  attaching to CPU 0 as enabled
    SKIP  : not enough rights
  test child finished with -2
  ---- end ----
  Test events times: Skip
  [acme@jouet linux]$

  [root@jouet ~]# perf test times
  44: Test events times                                        : Ok
  [root@jouet ~]# perf test -v times
  44: Test events times                                        :
  --- start ---
  test child forked, pid 27306
  attaching to spawned child, enable on exec
    OK    : ena 479290, run 479290
  attaching to current thread as enabled
    OK    : ena 11356, run 11356
  attaching to current thread as disabled
    OK    : ena 987, run 987
  attaching to CPU 0 as enabled
    OK    : ena 3717, run 3717
  attaching to CPU 0 as enabled
    OK    : ena 2323, run 2323
  test child finished with 0
  ---- end ----
  Test events times: Ok
  [root@jouet ~]#
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1458823940-24583-7-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>