rds_conn_destroy really needs locking while it changes the
connection hash.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The RDS send_xmit code was trying to get fancy with message
counting and was dropping the final reference on the RDMA messages
too early.  This resulted in memory corruption and oopsen.

The fix here is to always add a ref as the parts of the message passes
through rds_send_xmit, and always drop a ref as the parts of the message
go through completion handling.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This is the first in a long line of patches that tries to fix races
between RDS connection shutdown and RDS traffic.

Here we are maintaining a count of active senders to make sure
the connection doesn't go away while they are using it.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The RDS bind lookups are somewhat expensive in terms of CPU
time and locking overhead.  This commit changes them into a
faster RCU based hash tree instead of the rbtrees they were using
before.

On large NUMA systems it is a significant improvement.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Allocate send/recv rings in memory that is node-local to the HCA.
This significantly helps performance.
Signed-off-by: NAndy Grover <andy.grover@oracle.com>

Signed-off-by: NAndy Grover <andy.grover@oracle.com>

rds_ib_get_device is called very often as we turn an
ip address into a corresponding device structure.  It currently
take a global spinlock as it walks different lists to find active
devices.

This commit changes the lists over to RCU, which isn't very complex
because they are not updated very often at all.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This removes a global waitqueue used to wait for rds messages
and replaces it with a waitqueue inside the rds_message struct.

The global waitqueue turns into a global lock and significantly
bottlenecks operations on large machines.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The bind_lock is almost entirely readonly, but it gets
hammered during normal operations and is a major bottleneck.

This commit changes it to an rwlock, which takes it from 80%
of the system time on a big numa machine down to much lower
numbers.

A better fix would involve RCU, which is done in a later commit
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Update comments to reflect changes in previous commit.

Keeping as separate commits due to different authorship.
Signed-off-by: NAndy Grover <andy.grover@oracle.com>

rds_send_xmit is required to loop around after it releases the lock
because someone else could done a trylock, found someone working on the
list and backed off.

But, once we drop our lock, it is possible that someone else does come
in and make progress on the list.  We should detect this and not loop
around if another process is actually working on the list.

This patch adds a generation counter that is bumped every time we
get the lock and do some send work.  If the retry notices someone else
has bumped the generation counter, it does not need to loop around and
continue working.
Signed-off-by: NChris Mason <chris.mason@oracle.com>
Signed-off-by: NAndy Grover <andy.grover@oracle.com>

Call send_xmit() directly from pong()

Set pongs as op_active
Signed-off-by: NAndy Grover <andy.grover@oracle.com>

Can't see a reason not to allow signals to interrupt the wait.
Signed-off-by: NAndy Grover <andy.grover@oracle.com>

The purpose of the send quota was really to give fairness
when different connections were all using the same
workq thread to send backlogged msgs -- they could only send
so many before another connection could make progress.

Now that each connection is pushing the backlog from its
completion handler, they are all guaranteed to make progress
and the quota isn't needed any longer.

A thread *will* have to send all previously queued data, as well
as any further msgs placed on the queue while while c_send_lock
was held. In a pathological case a single process can get
roped into doing this for long periods while other threads
get off free. But, since it can only do this until the transport
reports full, this is a bounded scenario.
Signed-off-by: NAndy Grover <andy.grover@oracle.com>

Signed-off-by: NAndy Grover <andy.grover@oracle.com>

If the queue has nobody on it, then wake_up does nothing.
Signed-off-by: NAndy Grover <andy.grover@oracle.com>

Do not nest m_rs_lock under c_lock

Disable interrupts in {rdma,atomic}_send_complete
Signed-off-by: NAndy Grover <andy.grover@oracle.com>

Can no longer block, so use NOWAIT.
Signed-off-by: NAndy Grover <andy.grover@oracle.com>

Now that rds_send_xmit() does not block, we can call it directly
instead of going through the helper thread.
Signed-off-by: NAndy Grover <andy.grover@oracle.com>

rds_sendmsg() is calling the send worker function to
send the just-queued datagrams, presumably because it wants
the behavior where anything not sent will re-call the send
worker. We now ensure all queued datagrams are sent by retrying
from the send completion handler, so this isn't needed any more.
Signed-off-by: NAndy Grover <andy.grover@oracle.com>

rds_message_put() cannot be called with irqs off, so move it after
irqs are re-enabled.

Spinlocks throughout the function do not to use _irqsave because
the lock of c_send_lock at top already disabled irqs.
Signed-off-by: NAndy Grover <andy.grover@oracle.com>

This change allows us to call rds_send_xmit() from a tasklet,
which is crucial to our new operating model.

* Change c_send_lock to a spinlock
* Update stats fields "sem_" to "_lock"
* Remove unneeded rds_conn_is_sending()

About locking between shutdown and send -- send checks if the
connection is up. Shutdown puts the connection into
DISCONNECTING. After this, all threads entering send will exit
immediately. However, a thread could be *in* send_xmit(), so
shutdown acquires the c_send_lock to ensure everyone is out
before proceeding with connection shutdown.
Signed-off-by: NAndy Grover <andy.grover@oracle.com>

Performance is better if we use allocations that don't block
to refill the receive ring. Since the whole reason we were
kicking out to the worker thread was so we could do blocking
allocs, we no longer need to do this.

Remove gfp params from rds_ib_recv_refill(); we always use
GFP_NOWAIT.
Signed-off-by: NAndy Grover <andy.grover@oracle.com>

We now ask the transport to give us a rm for the congestion
map, and then we handle it normally. Previously, the
transport defined a function that we would call to send
a congestion map.

Convert TCP and loop transports to new cong map method.
Signed-off-by: NAndy Grover <andy.grover@oracle.com>

Now that we are signaling send completions much less, we are likely
to have dirty entries in the send queue when the connection is
shut down (on rmmod, for example.) These are cleaned up a little
further down in conn_shutdown, but if we wait on the ring_empty_wait
for them, it'll never happen, and we hand on unload.
Signed-off-by: NAndy Grover <andy.grover@oracle.com>

Previously, RDS would wait until the final send WR had completed
and then handle cleanup. With silent ops, we do not know
if an atomic, rdma, or data op will be last. This patch
handles any of these cases by keeping a pointer to the last
op in the message in m_last_op.

When the TX completion event fires, rds dispatches to per-op-type
cleanup functions, and then does whole-message cleanup, if the
last op equalled m_last_op.

This patch also moves towards having op-specific functions take
the op struct, instead of the overall rm struct.

rds_ib_connection has a pointer to keep track of a a partially-
completed data send operation. This patch changes it from an
rds_message pointer to the narrower rm_data_op pointer, and
modifies places that use this pointer as needed.
Signed-off-by: NAndy Grover <andy.grover@oracle.com>

It hasn't cropped up in the field, but this code ensures it is
impossible to issue operations that pass an rdma cookie (DEST, MAP)
in the same sendmsg call that's actually initiating rdma or atomic
ops.

Disallowing this perverse-but-technically-allowed usage makes silent
RDMA heuristics slightly easier.
Signed-off-by: NAndy Grover <andy.grover@oracle.com>

Add a flag to the API so users can indicate they want
silent operations. This is needed because silent ops
cannot be used with USE_ONCE MRs, so we can't just
assume silent.

Also, change send_xmit to do atomic op before rdma op if
both are present, and centralize the hairy logic to determine if
we want to attempt silent, or not.
Signed-off-by: NAndy Grover <andy.grover@oracle.com>

Also, add a comment.
Signed-off-by: NAndy Grover <andy.grover@oracle.com>

When dropping ops in the send queue, we notify the client
of failed rdma ops they asked for notifications on, but not
atomic ops. It should be for both.
Signed-off-by: NAndy Grover <andy.grover@oracle.com>

rds_message_alloc_sgs() only works when nents is nonzero.
Signed-off-by: NAndy Grover <andy.grover@oracle.com>

Do not allocate sgs for data for 0-length datagrams

Set data.op_active in rds_sendmsg() instead of
rds_message_copy_from_user().
Signed-off-by: NAndy Grover <andy.grover@oracle.com>

Simplify rds_send_xmit().

Send a congestion map (via xmit_cong_map) without
decrementing send_quota.

Move resetting of conn xmit variables to end of loop.

Update comments.

Implement a special case to turn off sending an rds header
when there is an atomic op and no other data.
Signed-off-by: NAndy Grover <andy.grover@oracle.com>

For consistency.
Signed-off-by: NAndy Grover <andy.grover@oracle.com>

A big changeset, but it's all pretty dumb.

struct rds_rdma_op was already embedded in struct rm_rdma_op.
Remove rds_rdma_op and put its members in rm_rdma_op. Rename
members with "op_" prefix instead of "r_", for consistency.

Of course this breaks a lot, so fixup the code accordingly.
Signed-off-by: NAndy Grover <andy.grover@oracle.com>

Add atomic_free_op function, analogous to rdma_free_op,
and call it in rds_message_purge().
Signed-off-by: NAndy Grover <andy.grover@oracle.com>

cmsg_rdma_args just calls rdma_prepare and does a little
arg checking -- not quite enough to justify its existence.
Plus, it is the only caller of rdma_prepare().
Signed-off-by: NAndy Grover <andy.grover@oracle.com>

Signed-off-by: NAndy Grover <andy.grover@oracle.com>

Also, try to better-document the locking around the
rm and its m_inc in loop.c.
Signed-off-by: NAndy Grover <andy.grover@oracle.com>

Maybe things worked fine with the flow control code running
even in the non-flow-control case, but making it explicitly
conditional helps the non-fc case be easier to read.
Signed-off-by: NAndy Grover <andy.grover@oracle.com>