- 22 4月, 2008 7 次提交
-
-
由 Adrian Bunk 提交于
This patch makes the following needlessly global functions static: - hid-core.c:hid_input_field() - usbhid/hid-quirks.c:usbhid_modify_dquirk() Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Anssi Hannula 提交于
Add force feedback support for Logitech Rumblepad 2. Tested-By: NEdgar Simo <bobbens@gmail.com> Signed-off-by: NAnssi Hannula <anssi.hannula@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Slaby 提交于
Since only place where this is used is usbhid, move it there. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Slaby 提交于
To check paramters even if debug is disabled, convert dbg_hid to inline function with __attribute__(format) checking. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Kosina 提交于
This device has reports lower logical maximum compared to the real usages for Zoom+ and Zoom- it emits. This patch bumps the values in the report descriptor up, and also adjusts HID_MAX_USAGE accordingly. Reported-by: NKhelben Blackstaff <eye.of.the.8eholder@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jim Duchek 提交于
Microsoft's wireless desktop receiver (Model 1028) has a bug in the report descriptor -- namely, in four seperate places it uses USAGE_MIN and _MAX when it quite obviously doesn't intend to. In other words, it reports that it has pretty much _everything_ in 'consumer' and 'generic desktop'. And then the X evdev driver believes I have a mouse with 36 absolute axes and a huge pile of keys and buttons, when I in fact, should have zero. 255/256 in three of the cases, and 0-1024 in another. This patch fixes the report descriptor of this device before it enters the HID parser. Signed-off-by: NJim Duchek <jim.duchek@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Pekka Sarnila 提交于
Many vendors highspeed devices give erroneously fullspeed interval value in endpoint descriptor for interrupt endpoints. This quirk fixes up that by recalculating the right value for highspeed device. At the time of hid configuration this quirk calculates which highspeed interval value gives same interval delay as, or next smaller then, what it would be if the original value would be interpreted as fullspeed value. In subsequent urbs that new value is used instead. Forming the 'hid->name' in usb_hid_config() was moved up to accommodate more descriptive printk reporting the fixup. In this patch the quirk is set for one such device: Afatech DVB-T 2 infrared HID-keyboard. It reports value 16 which means 4,069s in highspeed while obviously 16ms was intended. In this case quirk calculates new value to be 8 which gives when interpreted as highspeed value 16ms as wanted. The behavior of the device was verified to be what expected both before and after the patch. Signed-off-by: NPekka Sarnila <sarnila@adit.fi> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 11 2月, 2008 1 次提交
-
-
由 Jiri Kosina 提交于
The old code (before move) stopped further processing of the event after it has been already processed by the quirk handler. The new code didn't propagate the return value properly, and therefore the processing always proceeded, which was wrong. This patch fixes it. Pointed out in kernel.org bugzilla #9842 Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 28 1月, 2008 9 次提交
-
-
由 Robert Schedel 提交于
Samsung USB remotes (0419:0001) are rejected by kernel 2.6.23, because the report descriptor from the remote contains a 48 bit HID report field. HID 1.11 states: Fields may span at most 4 bytes. This patch, based on 2.6.23, fixes this by modifying the internal report descriptor in hid-quirks.c. Additional user space support (e.g. LIRC) is required to fetch the information from the hiddev interface. The burden to reconstruct the data is moved into userspace (lirc through hiddev). There is no need to set HID_QUIRK_HIDDEV quirk, as the device has also output applications, which trigger the creation of hiddev device automatically. Signed-off-by: NRobert Schedel <r.schedel@yahoo.de> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Fengguang Wu 提交于
Fix a panic, by changing hidinput_mapping_quirks(,, unsigned long *bit,) to hidinput_mapping_quirks(,, unsigned long **bit,) The `bit' in this function is an out parameter. Signed-off-by: NFengguang Wu <wfg@mail.ustc.edu.cn> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Kosina 提交于
This removes ugly macros IS_* to distinguish devices that need special handling in hid-input, and establish proper quirks for them. Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Kosina 提交于
BTC 8193 keyboard handles its scrollwheel in very non-standard way. It produces two non-standard usages for scrolling up and down, in both cases with postive value equaling to 1. We handle this by temporary mapping, which we then catch in quirk event handler, and remap to negative HWHEEL even in order to introduce correct behavior. Also the button requires special mapping, as it triggers standard-violating usage code. Reported in kernel.org bugzilla #9385 Reported-by: NKir Kolyshkin <kir@sacred.ru> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Kosina 提交于
This patch separates also the hid-input quirks that have to be applied at the time the event occurs, so that the generic code handling HUT-compliant devices is not messed up by them too much. Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Kosina 提交于
Currently, the handling of mapping between hid and input for devices that don't conform to HUT 1.12 specification is very messy -- no per-device handling, no blacklists, conditions on idVendor and idProduct placed all over the code. This patch moves all the device-specific input mapping to a separate file, and introduces a blacklist-style handling for non-standard device-specific mappings. Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Kosina 提交于
Genius KB-29E has broken report descriptor, which causes some of the Consumer usages to appear incorrectly as Button usages. We fix it by fixing the report descriptor before it is being parsed. Also a few of the keys violate the HUT standard, so they need a special handling. They currently fall into "Reserved" range as per HUT 1.12. Reported-by: NSzekeres Istvan <szekeres@iii.hu> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Pavel Troller 提交于
This mouse distinguishes horizontal wheel from vertical by a special "pseudo event" GenericDesktop.00b8, with values of 0 for vertical and 8 for horizontal wheel. Because this event is supplied by the parser too late, we need to delay a wheel event, wait for this one and send either REL_WHEEL or REL_HWHEEL to input depending on the event value. Signed-off-by: NPavel Troller <patrol@sinus.cz> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Michel Daenzer 提交于
Preserve identifiers exposed in build and run time configuration though in order not to break existing configurations. This is in preparation for adding support for Apple aluminum USB keyboards. Signed-off-by: NMichel Daenzer <michel@tungstengraphics.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 20 10月, 2007 1 次提交
-
-
由 Jiri Slaby 提交于
get rid of input BIT* duplicate defines use newly global defined macros for input layer. Also remove includes of input.h from non-input sources only for BIT macro definiton. Define the macro temporarily in local manner, all those local definitons will be removed further in this patchset (to not break bisecting). BIT macro will be globally defined (1<<x) Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Cc: <dtor@mail.ru> Acked-by: NJiri Kosina <jkosina@suse.cz> Cc: <lenb@kernel.org> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Cc: <perex@suse.cz> Acked-by: NMauro Carvalho Chehab <mchehab@infradead.org> Cc: <vernux@us.ibm.com> Cc: <malattia@linux.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 15 10月, 2007 1 次提交
-
-
由 Jiri Kosina 提交于
Fix bogus copying of data into userspace when HIDIOCGRDESC is issued. HID-transport layer makes sure that dev->hid->rdesc is not larger than HID_MAX_DESCRIPTOR_SIZE. Noticed-by: NAl Viro <viro@ftp.linux.org.uk> Signed-off-by: NJiri Kosina <jkosina@suse.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 14 10月, 2007 3 次提交
-
-
由 Jiri Kosina 提交于
hidraw is an interface that is going to obsolete hiddev one day. Many userland applications are using libusb instead of using kernel-provided hiddev interface. This is caused by various reasons - the HID parser in kernel doesn't handle all the HID hardware on the planet properly, some devices might require its own specific quirks/drivers, etc. hiddev interface tries to do its best to parse all the received reports properly, and presents only parsed usages into userspace. This is however often not enough, and that's the reason why many userland applications just don't use hiddev at all, and rather use libusb to read raw USB events and process them on their own. Another drawback of hiddev is that it is USB-specific. hidraw interface provides userspace readers with really raw HID reports, no matter what the low-level transport layer is (USB/BT), and gives the userland applications all the freedom to process the HID reports in a way they wish to. Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Tomoya Adachi 提交于
This patch fixes the problem, that Japanese MacBook doesn't recognize some keys like '\'(yen, or backslash), '|'(pipe), and '_'(underscore). It is due to that MacBook JIS keyboard (jp106) sends wrong report descriptor. It saids "logical maximum = 0x65", so Keyboard.0089 is mapped to Key.Unknown, while it should be accepted as Key.Yen. Signed-off-by: NTomoya Adachi <adachi@il.is.s.u-tokyo.ac.jp> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Stelian Pop 提交于
The infrared remote receiver found in the SantaRosa MacBookPro laptops (MacBookPro3,1) need to be forced to expose a HIDDEV interface (instead of HIDINPUT) so that lirc can access it using the 'macmini' driver. The patch below adds the required quirk for forcing the HIDDEV interface to be activated (HID_QUIRK_HIDDEV) and introduces a new quirk which forces the HIDINPUT interface to be ignored (HID_QUIRK_IGNORE_HIDINPUT). Note that Apple calls this receiver 'IRController4' (info taken from Apple's driver Info.plist). Older Mac{Book,Mini,Pro}s seem to all use the 'IRController1' device (USB id 05ac:8240) which doesn't need those quirks. Signed-off-by: NStelian Pop <stelian@popies.net> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 09 7月, 2007 5 次提交
-
-
由 Ryo Dairiki 提交于
This keyboard has wireless mouse which has left, middle, right buttons and 2-dimensional scrolling wheel. Unfornetuly, this wheel reports side scrolling events and 11 or 12 button events at the same time. I've wrote a patch to fix this mapping. I'm not sure if this mapping is proper for buttons, because , for example, there is no entry for "burn cd" in input.h. The patch also supress 11 and 12 button events from mouse when you scroll the wheel left and right. With this patch, only side scrolling events are reported. (This mouse has only 4 buttons and 2D wheel. There is no such buttons like 11 and 12.) Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Kosina 提交于
Lately there have been quite a lot of bug reports against broken devices which require us to fix their report descriptor in the runtime, before it is passed to the HID parser. Those devices have eaten quite an amount of our quirks space, which isn't particularly necessary - the quirks are not needed after the report descriptor is parsed, and they just consume bits. Therefore this patch separates the quirks for report descriptor fixup, and moves their handling into separate code. The quirks are then forgotten as soon as the report descriptor has been parsed. Module parameter 'rdesc_quirks' is introduced to be able to modify these quirks in runtime in a similar way to 'quirks' parameter for ordinary HID quirks. Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Kosina 提交于
Petalynx Maxter remote control [1] 0x18b1/0x0037 emits 0xfa and 0xfc from consumer page (reserved in HUT 1.12) for back and more keys. It also emits a few usages from LOGIVENDOR page, which need adding. Also, this device has broken report descriptor - the reported maximum is too low - it doesn't contain the range for 'back' and 'more' keys, so we need to bump it up before the report descriptor is being parsed. Besides all this, it also requires NOGET quirk. This patch does so. [1] http://www.elmak.pl/index.php?option=com_phpshop&page=shop.browse&category_id=14&ext=opis&lang=enSigned-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Kosina 提交于
Microsoft SideWinder GameVoice driver is a trivial device with a few buttons (0x09 HID usage) and an audio connector, which just forwards the audio input into oridinary sound card present in the computer. Despite this fact, the only interface of this device reports itself as a Telephony/Headset type of HID device. This is apparently incorrect - the device itself doesn't provide any audio/telephony functionality. This is achieved in userland application which only needs to receive the button events from the HID driver. This patch establishes a new quirk which forces hid-input to claim a device it will otherwise leave untouched. Reported-by: NTomas Carnecky <tom@dbservice.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Kosina 提交于
There have been many reports recently about broken HID devices, the diagnosis of which required users to recompile their kernels in order to be able to provide debugging output needed for coding a quirk for a particular device. This patch makes CONFIG_HID_DEBUG default y if !EMBEDDED and makes it possible to control debugging output produced by HID code by supplying 'debug=1' module parameter. Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 09 5月, 2007 1 次提交
-
-
由 Jiri Kosina 提交于
Certain versions of Cypress USB barcode readers (this problem is known to happen at least with PIDs 0xde61 and 0xde64) have report descriptor which has swapped usage min and usage max tag. This results in HID parser failing for report descriptor of these devices, as it (wrongly) requires allocating more usages than HID_MAX_USAGES. Solve this by walking through the report descriptor for such devices, and swap the usage min and usage max items (and their values) to be in proper order. Reported-by: NBret Towe <magnade@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 19 4月, 2007 3 次提交
-
-
由 Paul Walmsley 提交于
Add a 'quirks' module parameter for the usbhid module, so users can add or modify quirks at module load time. Signed-off-by: NPaul Walmsley <paul@booyaka.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Paul Walmsley 提交于
Add internal support for dynamically-allocated HID quirks, "dquirks" (for "dynamic quirks"). Includes several functions to add/modify quirks from the list. This code is used by the next patch to implement quirk modification upon module load. Signed-off-by: NPaul Walmsley <paul@booyaka.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Paul Walmsley 提交于
Move the USB_VENDOR* and USB_DEVICE* defines and the hid_blacklist[] array there from hid-core.c. Add hid-quirks.c:usbhid_lookup_any_quirks() to return quirk information to hid-core.c. Convert __u32, __u16 types to u32, u16. Signed-off-by: NPaul Walmsley <paul@booyaka.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 11 4月, 2007 2 次提交
-
-
由 Pete Zaitcev 提交于
On Dell W7658 keyboard, when BIOS sets NumLock LED on, it survives the takeover by kernel and thus confuses users. Eating of an increasibly scarce quirk bit is unfortunate. We do it for safety, given the history of nervous input devices which crash if anything unusual happens. Signed-off-by: NPete Zaitcev <zaitcev@redhat.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Kosina 提交于
Logitech MX3000 contains report descriptor which doesn't cover usages above 0x28c, but emits such usages. Report descriptor needs fixing in the very same way as with receivers shipped with S510 keyboards. This patch also adds a few mappings for multimedia keys that S510 didn't emit. Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 01 3月, 2007 2 次提交
-
-
由 Jiri Kosina 提交于
Dongle shipped with Logitech DiNovo Edge (0x046d/0xc714) behaves in a weird non-standard way - it contains multiple reports with the same usage, which results in remapping of GenericDesktop.X and GenericDesktop.Y usages to GenericDesktop.Z and GenericDesktop.RX respectively, thus rendering the touchwheel unusable. The commit 35068976 solved this in a way that it didn't remap certain usages. This however breaks (at least) middle button of Logic3 / SpectraVideo (0x1267/0x0210), which in contrary requires the remapping. To make both of the harware work, allow remapping of these usages again, and introduce a quirk for Logitech DiNovo Edge "touchwheel" instead - we disable remapping for key, abs and rel events only for this hardware. Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Kosina 提交于
This patch makes extra keys (F1-F12 in special mode, zooming, rotate, shuffle) on Logitech S510 keyboard work. Logitech S510 keyboard sends in report no. 3 keys which are far above the logical maximum described in descriptor for given report. This patch introduces a HID quirk for this wireless USB receiver/keyboard in order to fix the report descriptor before it's being parsed - the logical maximum and the number of usages is bumped up to 0x104d). The values are in the "Reserved" area of consumer HUT, so HID_MAX_USAGE had to be changed too. In addition to proper extracting of the values from report descriptor, proper HID-input mapping is introduced for them. Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 08 2月, 2007 1 次提交
-
-
由 Geoff Levand 提交于
Add the USB HID quirk HID_QUIRK_SONY_PS3_CONTROLLER. This sends an HID_REQ_GET_REPORT to the the PS3 controller to put the device into 'operational mode'. Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 05 2月, 2007 4 次提交
-
-
由 Soeren Sonnenburg 提交于
Some HID devices by Apple have both keyboard and mouse interfaces; the keyboard interface is handled by usbhid, but the mouse (really touchpad) interface must be handled by the separate 'appletouch' driver. Using HID_QUIRK_IGNORE will make hiddev ignore both interfaces, therefore a new quirk flag to ignore only the mouse interface is required. Signed-off-by: NSoeren Sonnenburg <kernel@nn7.de> Signed-off-by: NSergey Vlasov <vsu@altlinux.ru> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Kosina 提交于
hidinput_{open,close}() functions do not belong to usbhid, but to the generic HID layer. Move them, and fix hooks in struct hid_device, so that now the callbacks are done to transport-specific _open() functions, but not input_open() functions. Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Kosina 提交于
hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Anssi Hannula 提交于
Add a force feedback driver for PantherLord USB/PS2 2in1 Adapter, 0810:0001. The device identifies itself as "Twin USB Joystick". Signed-off-by: NAnssi Hannula <anssi.hannula@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-