This patch adds an sysfs entry to control dir_level used by the large directory.

The description of this entry is:

 dir_level                    This parameter controls the directory level to
			      support large directory. If a directory has a
			      number of files, it can reduce the file lookup
			      latency by increasing this dir_level value.
			      Otherwise, it needs to decrease this value to
			      reduce the space overhead. The default value is 0.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch introduces an i_dir_level field to support large directory.

Previously, f2fs maintains multi-level hash tables to find a dentry quickly
from a bunch of chiild dentries in a directory, and the hash tables consist of
the following tree structure as below.

In Documentation/filesystems/f2fs.txt,

----------------------
A : bucket
B : block
N : MAX_DIR_HASH_DEPTH
----------------------

level #0   | A(2B)
           |
level #1   | A(2B) - A(2B)
           |
level #2   | A(2B) - A(2B) - A(2B) - A(2B)
     .     |   .       .       .       .
level #N/2 | A(2B) - A(2B) - A(2B) - A(2B) - A(2B) - ... - A(2B)
     .     |   .       .       .       .
level #N   | A(4B) - A(4B) - A(4B) - A(4B) - A(4B) - ... - A(4B)

But, if we can guess that a directory will handle a number of child files,
we don't need to traverse the tree from level #0 to #N all the time.
Since the lower level tables contain relatively small number of dentries,
the miss ratio of the target dentry is likely to be high.

In order to avoid that, we can configure the hash tables sparsely from level #0
like this.

level #0   | A(2B) - A(2B) - A(2B) - A(2B)

level #1   | A(2B) - A(2B) - A(2B) - A(2B) - A(2B) - ... - A(2B)
     .     |   .       .       .       .
level #N/2 | A(2B) - A(2B) - A(2B) - A(2B) - A(2B) - ... - A(2B)
     .     |   .       .       .       .
level #N   | A(4B) - A(4B) - A(4B) - A(4B) - A(4B) - ... - A(4B)

With this structure, we can skip the ineffective tree searches in lower level
hash tables.

This patch adds just a facility for this by introducing i_dir_level in
f2fs_inode.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

It turns out that a bit operation like find_next_bit is not always fast enough
for f2fs_find_entry.
Instead, it is pretty much simple and fast to traverse each dentries.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

The stat_show is just to show the current status of f2fs.
So, we can remove all the there-in locks.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch introduces a radix tree for the list of free_nids, which enhances
the performance on free nid management.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Introduce help macro on_build_free_nids() which just uses build_lock
to judge whether the building free nid is going, so that we can remove
the on_build_free_nids field from f2fs_sb_info.
Signed-off-by: NGu Zheng <guz.fnst@cn.fujitsu.com>
[Jaegeuk Kim: remove an unnecessary white line removal]
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

The nat cache entry maintains a status whether it is checkpointed or not.
So, if a new cache entry is loaded from the last checkpoint,
nat_entry->checkpointed should be true.
If the cache entry is modified as being dirty, nat_entry->checkpoint should
be false.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

At the end of the recovery procedure, write_checkpoint is called and updates
the cp count which is managed by f2fs stat.
But, previously build_stat() is called after the recovery procedure, which
results in:

BUG: unable to handle kernel NULL pointer dereference at 000000000000012c
IP: [<ffffffffa03b1030>] write_checkpoint+0x720/0xbc0 [f2fs]
Call Trace:
 [<ffffffff810a6b44>] ? mark_held_locks+0x74/0x140
 [<ffffffff8109a3e0>] ? __init_waitqueue_head+0x60/0x60
 [<ffffffffa03bf036>] recover_fsync_data+0x656/0xf20 [f2fs]
 [<ffffffff812ee3eb>] ? security_d_instantiate+0x1b/0x30
 [<ffffffffa03aeb4d>] f2fs_fill_super+0x94d/0xa00 [f2fs]
 [<ffffffff811a9825>] mount_bdev+0x1a5/0x1f0
 [<ffffffff8114915e>] ? __get_free_pages+0xe/0x40
 [<ffffffffa03ae200>] ? f2fs_remount+0x130/0x130 [f2fs]
 [<ffffffffa03aa575>] f2fs_mount+0x15/0x20 [f2fs]
 [<ffffffff811aa713>] mount_fs+0x43/0x1b0
 [<ffffffff811c7124>] vfs_kern_mount+0x74/0x160
 [<ffffffff811c5cb1>] ? __get_fs_type+0x51/0x60
 [<ffffffff811c9727>] do_mount+0x237/0xb50
 [<ffffffff811c936a>] ? copy_mount_options+0x3a/0x170

So, this patche changes the order of recovery_fsync_data() and
f2fs_build_stats().
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Even if f2fs_write_data_page is called by the page reclaiming path, we should
not write the page to provide enough free segments for the worst case scenario.
Otherwise, f2fs can face with no free segment while gc is conducted, resulting
in:

 ------------[ cut here ]------------
 kernel BUG at /home/zeus/f2fs_test/src/fs/f2fs/segment.c:565!
 RIP: 0010:[<ffffffffa02c3b11>]  [<ffffffffa02c3b11>] new_curseg+0x331/0x340 [f2fs]
 Call Trace:
  allocate_segment_by_default+0x204/0x280 [f2fs]
  allocate_data_block+0x108/0x210 [f2fs]
  write_data_page+0x8a/0xc0 [f2fs]
  do_write_data_page+0xe1/0x2a0 [f2fs]
  move_data_page+0x8a/0xf0 [f2fs]
  f2fs_gc+0x446/0x970 [f2fs]
  f2fs_balance_fs+0xb6/0xd0 [f2fs]
  f2fs_write_begin+0x50/0x350 [f2fs]
  ? unlock_page+0x27/0x30
  ? unlock_page+0x27/0x30
  generic_file_buffered_write+0x10a/0x280
  ? file_update_time+0xa3/0xf0
  __generic_file_aio_write+0x1c8/0x3d0
  ? generic_file_aio_write+0x52/0xb0
  ? generic_file_aio_write+0x52/0xb0
  generic_file_aio_write+0x65/0xb0
  do_sync_write+0x5a/0x90
  vfs_write+0xc5/0x1f0
  SyS_write+0x55/0xa0
  system_call_fastpath+0x16/0x1b
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Total nids that f2fs can use should not include 0, nid for node inode, and nid
for meta inode.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch shows the counts of checkpoint in f2fs' status.
Signed-off-by: NChangman Lee <cm224.lee@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch help us to cleanup the readahead code by merging ra_{sit,nat}_pages
function into ra_meta_pages.
Additionally the new function is used to readahead cp block in
recover_orphan_inodes.

Change log from v1:
 o fix a deadloop bug pointed by Jaegeuk Kim.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Previously without protection of inode mutex, f2fs_falloc and other data
correlated operations will interfere with each other.
So let's use inode mutex to keep atomicity of f2fs_falloc.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch integrates inode_[inc|dec]_dirty_dents with inc_page_count to remove
redundant calls.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

If f2fs entered errorneous checkpoint status, it should skip writing meta
pages instead of redirtying the pages out.
Otherwise, it cannot unmount the partition even though f2fs is under read-only
status.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

When a new directory is allocated, if an error is occurred, we should truncate
preallocated dentry pages too.

This bug was reported by Andrey Tsyvarev after a while as follows.

mkdir()->
 f2fs_add_link()->
  init_inode_metadata()->
    f2fs_init_acl()->
      f2fs_get_acl()->
        f2fs_getxattr()->
          read_all_xattrs() fails.

Also there was a BUG_ON triggered after the fault in
mkdir()->
 f2fs_add_link()->
   init_inode_metadata()->
    remove_inode_page() ->
      f2fs_bug_on(inode->i_blocks != 0 && inode->i_blocks != 1);

But, previous patch wasn't perfect to resolve that bug, so the following bug
report was also submitted.

kernel BUG at fs/f2fs/inode.c:274!
Call Trace:
 [<ffffffff811fde03>] evict+0xa3/0x1a0
 [<ffffffff811fe615>] iput+0xf5/0x180
 [<ffffffffa01c7f63>] f2fs_mkdir+0xf3/0x150 [f2fs]
 [<ffffffff811f2a77>] vfs_mkdir+0xb7/0x160
 [<ffffffff811f36bf>] SyS_mkdir+0x5f/0xc0
 [<ffffffff81680769>] system_call_fastpath+0x16/0x1b

Finally, this patch resolves all the issues like below.

If an error is occurred after make_empty_dir(),
 1. truncate_inode_pages()
   The make_bad_inode() prior to iput() will change i_mode to S_IFREG, which
   means that f2fs will not decrement fi->dirty_dents during f2fs_evict_inode.
   But, by calling it here, we can do that.

 2. truncate_blocks()
   Preallocated dentry pages are trucated here to sync i_blocks.

 3. remove_dirty_dir_inode()
   Remove this directory inode from the list.
Reported-and-Tested-by: NAndrey Tsyvarev <tsyvarev@ispras.ru>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch modifies flow a little bit to avoid the following build warnings.

src/fs/f2fs/recovery.c: In function ‘check_index_in_prev_nodes’:
src/fs/f2fs/recovery.c:288:51: warning: ‘sum.<U5390>.<U52f8>.ofs_in_node’ may
	be used uninitialized in this function [-Wmaybe-uninitialized]
src/fs/f2fs/recovery.c:260:23: warning: ‘sum.nid’ may be used uninitialized
	in this function [-Wmaybe-uninitialized]
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch adds GET_BLKOFF_FROM_SEG0 to clean up some codes.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This is the erroneous scenario.

                             i_size    on-disk i_size    i_blocks
__f2fs_add_link()             4096           4096           2
 get_new_data_page            8192           4096           3
 -ENOSPC = init_inode_metadata
 checkpoint                     -            4096           3
 POR and reboot

__f2fs_add_link()             4096           4096           3
 page = get_new_data_page (page->index = 1 by NEW_ADDR)
 add a dentry to the page successfully

f2fs_rmdir()
 f2fs_empty_dir()             4096           4096           3
 f2fs_unlink() goes, since there is no valid dentry due to i_size = 4096.
 But, still there is one dentry in page->index = 1.

So this patch moves the code to write dir->i_size into on-disk i_size in order
to sync dir's i_size, on-disk i_size, and its i_blocks.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch modifies the use of bi_private to remove pointer chasing for sbi.
Previously, we had a bi_private structure, but it needs memory allocation.
So this patch uses bi_private by the sbi pointer and adds a completion pointer
into the sbi.
This can achieve no memory allocation and nice use of the bi_private.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

If a new xattr node page was allocated and its inode is fsynced, we should
recover the xattr node page during the roll-forward process after power-cut.
But, previously, f2fs didn't handle that case, resulting in kernel panic as
follows reported by Tom Li.

BUG: unable to handle kernel paging request at ffffc9001c861a98
IP: [<ffffffffa0295236>] check_index_in_prev_nodes+0x86/0x2d0 [f2fs]
Call Trace:
 [<ffffffff815ece9b>] ? printk+0x48/0x4a
 [<ffffffffa029626a>] recover_fsync_data+0xdca/0xf50 [f2fs]
 [<ffffffffa02873ae>] f2fs_fill_super+0x92e/0x970 [f2fs]
 [<ffffffff8112c9f8>] mount_bdev+0x1b8/0x200
 [<ffffffffa0286a80>] ? f2fs_remount+0x130/0x130 [f2fs]
 [<ffffffffa0285e40>] f2fs_mount+0x10/0x20 [f2fs]
 [<ffffffff8112d4de>] mount_fs+0x3e/0x1b0
 [<ffffffff810ef4eb>] ? __alloc_percpu+0xb/0x10
 [<ffffffff8114761f>] vfs_kern_mount+0x6f/0x120
 [<ffffffff811497b9>] do_mount+0x259/0xa90
 [<ffffffff810ead1d>] ? memdup_user+0x3d/0x80
 [<ffffffff810eadb3>] ? strndup_user+0x53/0x70
 [<ffffffff8114a2c9>] SyS_mount+0x89/0xd0
 [<ffffffff815feae2>] system_call_fastpath+0x16/0x1b

This patch adds a recovery function of xattr node pages.
Reported-by: NTom Li <biergaizi@members.fsf.org>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch cleans up the refresh_sit_entry to handle locate_dirty_segments.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

In order to make fs consistency, update_inode_page should not be failed all
the time. Otherwise, it is possible to lose some metadata in the inode like
a link count.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

f2fs has some weird mode bit handling, so still using the old
chmod code for now.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Rename the current posix_acl_created to __posix_acl_create and add
a fully featured helper to set up the ACLs on file creation that
uses get_acl().
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJan Kara <jack@suse.cz>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Rename the current posix_acl_chmod to __posix_acl_chmod and add
a fully featured ACL chmod helper that uses the ->set_acl inode
operation.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJan Kara <jack@suse.cz>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

If a node page is trucated, we'd better drop the page in the node_inode's page
cache for better memory footprint.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch adds NODE_MAPPING which is similar as META_MAPPING introduced by
Gu Zheng.

Cc: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

As the orphan_blocks may be max to 504, so it is not security
and rigorous to store such a large array in the kernel stack
as Dan Carpenter said.
In fact, grab_meta_page has locked the page in the page cache,
and we can use find_get_page() to fetch the page safely in the
downstream, so we can remove the page array directly.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NGu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Introduce help function META_MAPPING() to get the cache meta blocks'
address space.
Signed-off-by: NGu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch moves a function in f2fs_delete_entry for code readability.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

If a dentry page is updated, we should call mark_inode_dirty to add the inode
into the dirty list, so that its dentry pages are flushed to the disk.
Otherwise, the inode can be evicted without flush.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Fixed a variety of trivial checkpatch warnings.  The only delta should
be some minor formatting on log strings that were split / too long.
Signed-off-by: NChris Fries <cfries@motorola.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Doing sync_meta_pages with META_FLUSH when checkpoint, we overide rw
using WRITE_FLUSH_FUA. At this time, we also should set
REQ_META|REQ_PRIO.
Signed-off-by: NChangman Lee <cm224.lee@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch should resolve the following bug.

=========================================================
[ INFO: possible irq lock inversion dependency detected ]
3.13.0-rc5.f2fs+ #6 Not tainted
---------------------------------------------------------
kswapd0/41 just changed the state of lock:
 (&sbi->gc_mutex){+.+.-.}, at: [<ffffffffa030503e>] f2fs_balance_fs+0xae/0xd0 [f2fs]
but this lock took another, RECLAIM_FS-READ-unsafe lock in the past:
 (&sbi->cp_rwsem){++++.?}

and interrupts could create inverse lock ordering between them.

other info that might help us debug this:
Chain exists of:
  &sbi->gc_mutex --> &sbi->cp_mutex --> &sbi->cp_rwsem

 Possible interrupt unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&sbi->cp_rwsem);
                               local_irq_disable();
                               lock(&sbi->gc_mutex);
                               lock(&sbi->cp_mutex);
  <Interrupt>
    lock(&sbi->gc_mutex);

 *** DEADLOCK ***

This bug is due to the f2fs_balance_fs call in f2fs_write_data_page.
If f2fs_write_data_page is triggered by wbc->for_reclaim via kswapd, it should
not call f2fs_balance_fs which tries to get a mutex grabbed by original syscall
flow.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Support for f2fs-tools/tools/f2stat to monitor
/sys/kernel/debug/f2fs/status
Signed-off-by: NChangman Lee <cm224.lee@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

With the 2 previous changes, all the long time operations are moved out
of the protection region, so here we can use spinlock rather than mutex
(orphan_inode_mutex) for lower overhead.
Signed-off-by: NGu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Move alloc new orphan node out of lock protection region.
Signed-off-by: NGu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Move grabing orphan block page out of protection region, and grab all
the orphan block pages ahead.
Signed-off-by: NGu Zheng <guz.fnst@cn.fujitsu.com>
Reviewed-by: NChao Yu <chao2.yu@samsung.com>
[Jaegeuk Kim: remove unnecessary code pointed by Chao Yu]
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

"boo sync" parameter is never referenced in f2fs_wait_on_page_writeback.
We should remove this parameter.
Signed-off-by: NYuan Zhong <yuan.mark.zhong@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>